diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh
deleted file mode 100755
index a464adc..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2021 Ampere Computing LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#	http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# Ampere Computing LLC: UART MUX/DEMUX for CPU0 UART0,1,4 and CPU1 UART1
-# Usage: ampere_uartmux_ctrl.sh <CPU UART port number> <UARTx_MODE>
-#        <UARTx_MODE> of 1 sets CPU To HDR_CONN
-#        <UARTx_MODE> of 2 sets BMC to CPU (eg dropbear ssh server on port 2200)
-
-# shellcheck source=meta-ampere/meta-jade/recipes-ampere/platform/ampere-utils/gpio-lib.sh
-source /usr/sbin/gpio-lib.sh
-
-if [ $# -lt 2 ]; then
-	exit 1
-fi
-
-case "$1" in
-	1) GPIO_UARTx_MODE0=56
-	   # CPU0 UART0 connects to BMC UART1
-	   CONSOLE_PORT=0
-	;;
-	2) GPIO_UARTx_MODE0=57
-	   # CPU0 UART1 connects to BMC UART2
-	   CONSOLE_PORT=1
-	;;
-	3) GPIO_UARTx_MODE0=58
-	   # CPU0 UART4 connects to BMC UART3
-	   CONSOLE_PORT=2
-	;;
-	4) GPIO_UARTx_MODE0=59
-	   # CPU1 UART1 connects to BMC UART4
-	   CONSOLE_PORT=3
-	;;
-	*) echo "Invalid UART port selection"
-	   exit 1
-	;;
-esac
-
-# Only switch the MUX when there is no active connection. This means we only
-# switch the MUX before the first session starts and after the last session
-# closes. We do this by querying number of connected sessions to the socket
-# of requested console port.
-# Example format:  Accepted: 1; Connected: 1;
-CONNECTED=$(systemctl --no-pager status obmc-console-ttyS${CONSOLE_PORT}-ssh.socket | grep -w Connected | cut -d ':' -f 3 | tr -d ' ;')
-if [ ! "$CONNECTED" -le 1 ]; then
-	exit 0
-fi
-
-echo "Ampere UART MUX CTRL UART port $1 to mode $2"
-
-case "$2" in
-	1) gpio_configure_output "${GPIO_UARTx_MODE0}" 0
-	   exit 0
-	;;
-	2) gpio_configure_output "${GPIO_UARTx_MODE0}" 1
-	   exit 0
-	;;
-	*) echo "Invalid UART mode selection"
-	   exit 1
-	;;
-esac
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2200.conf b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2200.conf
new file mode 100644
index 0000000..901895b
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2200.conf
@@ -0,0 +1 @@
+# socket-id is default to obmc-console
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2201.conf b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2201.conf
new file mode 100644
index 0000000..f06d9fc
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2201.conf
@@ -0,0 +1 @@
+socket-id = ttyS1
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2202.conf b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2202.conf
new file mode 100644
index 0000000..dba9b8d
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2202.conf
@@ -0,0 +1 @@
+socket-id = ttyS2
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2203.conf b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2203.conf
new file mode 100644
index 0000000..0047b89
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/client.2203.conf
@@ -0,0 +1 @@
+socket-id = ttyS3
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-server-setup.sh b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-server-setup.sh
deleted file mode 100644
index 4e0a013..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-server-setup.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/bin/sh -e
-#
-# Copyright (c) 2020 Ampere Computing LLC
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#	http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-tty="$1"
-uart=0
-
-case "${tty}" in
- "ttyS0") uart=1
- ;;
- "ttyS1") uart=2
- ;;
- "ttyS2") uart=3
- ;;
- "ttyS3") uart=4
- ;;
- *) echo "Invalid tty passed to $0. Exiting!"
-    exit 1;
- ;;
-esac
-
-# Default the host routing through the mux to use the BMC (2)
-# This allows the SoL console in webui, and the ssh port 2200, to work
-# upon startup. If UART transcievers are installed on the header and required,
-# this value should be set to 1
-/usr/sbin/ampere_uartmux_ctrl.sh ${uart} 2
-
-/usr/sbin/obmc-console-server --config /etc/obmc-console/server."${tty}".conf "${tty}"
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS0-ssh.socket b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS0-ssh.socket
deleted file mode 100644
index 183a7a4..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS0-ssh.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection socket
-Wants=obmc-console@ttyS0.service
-
-[Socket]
-ListenStream=2200
-Accept=yes
-
-[Install]
-WantedBy=sockets.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS0-ssh@.service b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS0-ssh@.service
deleted file mode 100644
index f964454..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS0-ssh@.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection
-Wants=obmc-console@ttyS0.service
-
-[Service]
-Environment="DROPBEAR_RSAKEY_DIR=/etc/dropbear"
-EnvironmentFile=/etc/default/dropbear
-ExecStart=/usr/sbin/dropbear -i -r ${DROPBEAR_RSAKEY_DIR}/dropbear_rsa_host_key -c "/usr/bin/obmc-console-client -c /etc/obmc-console/server.ttyS0.conf" -p ttyS0 -F $DROPBEAR_EXTRA_ARGS
-SyslogIdentifier=dropbear
-ExecReload=/bin/kill -HUP $MAINPID
-StandardInput=socket
-KillMode=process
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS1-ssh.socket b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS1-ssh.socket
deleted file mode 100644
index bdbf562..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS1-ssh.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection socket
-Wants=obmc-console@ttyS1.service
-
-[Socket]
-ListenStream=2201
-Accept=yes
-
-[Install]
-WantedBy=sockets.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS1-ssh@.service b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS1-ssh@.service
deleted file mode 100644
index 697c242..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS1-ssh@.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection
-Wants=obmc-console@ttyS1.service
-
-[Service]
-Environment="DROPBEAR_RSAKEY_DIR=/etc/dropbear"
-EnvironmentFile=/etc/default/dropbear
-ExecStart=/usr/sbin/dropbear -i -r ${DROPBEAR_RSAKEY_DIR}/dropbear_rsa_host_key -c "/usr/bin/obmc-console-client -c /etc/obmc-console/server.ttyS1.conf" -p ttyS1 -F $DROPBEAR_EXTRA_ARGS
-SyslogIdentifier=dropbear
-ExecReload=/bin/kill -HUP $MAINPID
-StandardInput=socket
-KillMode=process
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS2-ssh.socket b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS2-ssh.socket
deleted file mode 100644
index f8934fd..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS2-ssh.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection socket
-Wants=obmc-console@ttyS2.service
-
-[Socket]
-ListenStream=2202
-Accept=yes
-
-[Install]
-WantedBy=sockets.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS2-ssh@.service b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS2-ssh@.service
deleted file mode 100644
index 7d7f314..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS2-ssh@.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection
-Wants=obmc-console@ttyS2.service
-
-[Service]
-Environment="DROPBEAR_RSAKEY_DIR=/etc/dropbear"
-EnvironmentFile=/etc/default/dropbear
-ExecStart=/usr/sbin/dropbear -i -r ${DROPBEAR_RSAKEY_DIR}/dropbear_rsa_host_key -c "/usr/bin/obmc-console-client -c /etc/obmc-console/server.ttyS2.conf" -p ttyS2 -F $DROPBEAR_EXTRA_ARGS
-SyslogIdentifier=dropbear
-ExecReload=/bin/kill -HUP $MAINPID
-StandardInput=socket
-KillMode=process
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS3-ssh.socket b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS3-ssh.socket
deleted file mode 100644
index fd7f3e3..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS3-ssh.socket
+++ /dev/null
@@ -1,10 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection socket
-Wants=obmc-console@ttyS3.service
-
-[Socket]
-ListenStream=2203
-Accept=yes
-
-[Install]
-WantedBy=sockets.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS3-ssh@.service b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS3-ssh@.service
deleted file mode 100644
index 261f3a1..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console-ttyS3-ssh@.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Phosphor Host Console SSH Per-Connection
-Wants=obmc-console@ttyS3.service
-
-[Service]
-Environment="DROPBEAR_RSAKEY_DIR=/etc/dropbear"
-EnvironmentFile=/etc/default/dropbear
-ExecStart=/usr/sbin/dropbear -i -r ${DROPBEAR_RSAKEY_DIR}/dropbear_rsa_host_key -c "/usr/bin/obmc-console-client -c /etc/obmc-console/server.ttyS3.conf" -p ttyS3 -F $DROPBEAR_EXTRA_ARGS
-SyslogIdentifier=dropbear
-ExecReload=/bin/kill -HUP $MAINPID
-StandardInput=socket
-KillMode=process
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console@.service b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console@.service
deleted file mode 100644
index 22a5df2..0000000
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console/obmc-console@.service
+++ /dev/null
@@ -1,17 +0,0 @@
-[Unit]
-Description=Phosphor Console Muxer listening on device /dev/%I
-BindsTo=dev-%i.device
-After=dev-%i.device
-StartLimitBurst=3
-StartLimitIntervalSec=300
-
-[Service]
-ExecStart=/usr/sbin/obmc-console-server-setup.sh %i
-SyslogIdentifier=obmc-console-server
-Restart=always
-RestartSec=10
-TimeoutStartSec=60
-TimeoutStopSec=60
-
-[Install]
-WantedBy=multi-user.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console_%.bbappend b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console_%.bbappend
index 655a446..60a26ce 100644
--- a/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console_%.bbappend
+++ b/meta-ampere/meta-jade/recipes-phosphor/console/obmc-console_%.bbappend
@@ -3,52 +3,26 @@
 
 # Remove what installed by common recipe
 OBMC_CONSOLE_HOST_TTY = ""
-SYSTEMD_SUBSTITUTIONS:remove = "OBMC_CONSOLE_HOST_TTY:${OBMC_CONSOLE_HOST_TTY}:${PN}-ssh@.service"
 SYSTEMD_SUBSTITUTIONS:remove = "OBMC_CONSOLE_HOST_TTY:${OBMC_CONSOLE_HOST_TTY}:${PN}-ssh.socket"
-SYSTEMD_SERVICE:${PN}:remove = " \
-                          ${PN}-ssh.socket \
-                          ${PN}-ssh@.service \
-                        "
 
-# Declare port spcific conf and service files
-HOST_CONSOLE_TTY = "ttyS0 ttyS1 ttyS2 ttyS3"
+# Declare port spcific config files
+OBMC_CONSOLE_TTYS = "ttyS0 ttyS1 ttyS2 ttyS3"
+CONSOLE_CLIENT = "2200 2201 2202 2203"
 
-CONSOLE_CONF_FMT = "file://server.{0}.conf"
-SRC_URI += "${@compose_list(d, 'CONSOLE_CONF_FMT', 'HOST_CONSOLE_TTY')}"
-SRC_URI += "file://${BPN}-server-setup.sh"
-SRC_URI += "file://${BPN}@.service"
-SRC_URI += "file://ampere_uartmux_ctrl.sh"
+CONSOLE_SERVER_CONF_FMT = "file://server.{0}.conf"
+CONSOLE_CLIENT_CONF_FMT = "file://client.{0}.conf"
 
-CONSOLE_SSH_SOCKET_FILE_FMT = "file://${PN}-{0}-ssh.socket"
-CONSOLE_SSH_SERVICE_FILE_FMT = "file://${PN}-{0}-ssh@.service"
-SRC_URI += "${@compose_list(d, 'CONSOLE_SSH_SOCKET_FILE_FMT', 'HOST_CONSOLE_TTY')}"
-SRC_URI += "${@compose_list(d, 'CONSOLE_SSH_SERVICE_FILE_FMT', 'HOST_CONSOLE_TTY')}"
+SRC_URI += " ${@compose_list(d, 'CONSOLE_SERVER_CONF_FMT', 'OBMC_CONSOLE_TTYS')} \
+             ${@compose_list(d, 'CONSOLE_CLIENT_CONF_FMT', 'CONSOLE_CLIENT')} \
+           "
 
-CONSOLE_SSH_SOCKET_FMT = "${PN}-{0}-ssh.socket"
-CONSOLE_SSH_SERVICE_FMT = "${PN}-{0}-ssh@.service"
+SYSTEMD_SERVICE:${PN}:remove = "obmc-console-ssh.socket"
 
-SYSTEMD_SERVICE:${PN} = " \
-                          ${PN}@.service \
-                          ${@compose_list(d, 'CONSOLE_SSH_SOCKET_FMT', 'HOST_CONSOLE_TTY')} \
-                          ${@compose_list(d, 'CONSOLE_SSH_SERVICE_FMT', 'HOST_CONSOLE_TTY')} \
-                        "
+FILES:${PN}:remove = "${systemd_system_unitdir}/obmc-console-ssh@.service.d/use-socket.conf"
+
+EXTRA_OECONF:append = " --enable-concurrent-servers"
+
 do_install:append() {
-    for i in ${HOST_CONSOLE_TTY}
-    do
-        install -m 0644 ${WORKDIR}/server.${i}.conf ${D}${sysconfdir}/${BPN}/server.${i}.conf
-        install -m 0644 ${WORKDIR}/${BPN}-${i}-ssh.socket ${D}${systemd_unitdir}/system/${BPN}-${i}-ssh.socket
-        install -m 0644 ${WORKDIR}/${BPN}-${i}-ssh@.service ${D}${systemd_unitdir}/system/${BPN}-${i}-ssh@.service
-    done
-    install -m 0755 ${WORKDIR}/${BPN}-server-setup.sh ${D}${sbindir}/${BPN}-server-setup.sh
-
-    # Deal with files installed by the base package's .bb install function
-    rm -f ${D}${sysconfdir}/${BPN}.conf
-    rm -f ${D}${sysconfdir}/${BPN}/server.ttyVUART0.conf
-    rm -rf ${D}${systemd_unitdir}/system/${BPN}-ssh@.service.d/
-    rm -f ${D}${systemd_unitdir}/system/${BPN}-ssh@.service
-    rm -f ${D}${systemd_unitdir}/system/${BPN}-ssh.socket
-    # Overwrite base package's obmc-console@.service with our own
-    install -m 0644 ${WORKDIR}/${BPN}@.service ${D}${systemd_unitdir}/system/${BPN}@.service
-    install -d ${D}/usr/sbin
-    install -m 0755 ${WORKDIR}/ampere_uartmux_ctrl.sh ${D}/${sbindir}/ampere_uartmux_ctrl.sh
+    # Install the console client configurations
+    install -m 0644 ${WORKDIR}/client.*.conf ${D}${sysconfdir}/${BPN}/
 }