meta-ibm/meta-sbp1: Support x86 host BIOS updates
Add the obmc-flash-host-bios@.service service and bios-update.sh
bash script to update the BIOS on the x86 SPI flash.
The bios-update.sh enables x86 PCH power, puts the Intel ME into
recovery mode and then flashes the x86 SPI flash over eSPI.
After updating the Intel ME is reset and the system shut down again.
Tested: The x86 BIOS can be updated.
Change-Id: I99fc67612d5e16b07fb924858fb013685f8c4a7b
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
diff --git a/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager/bios-update.sh b/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager/bios-update.sh
new file mode 100755
index 0000000..7f30db3
--- /dev/null
+++ b/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager/bios-update.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+
+set -e
+
+IMAGE_FILE=$(find "$1" -name "*.FD")
+
+IPMB_OBJ="xyz.openbmc_project.Ipmi.Channel.Ipmb"
+IPMB_PATH="/xyz/openbmc_project/Ipmi/Channel/Ipmb"
+IPMB_INTF="org.openbmc.Ipmb"
+
+
+# me address, 0x2e oen, 0x00 - lun, 0xdf - force recovery
+ME_CMD_RECOVER="1 0x2e 0 0xdf 4 0x57 0x01 0x00 0x01"
+# me address, 0x6 App Fn, 0x00 - lun, 0x2 - cold reset
+ME_CMD_RESET="1 6 0 0x2 0"
+# me address, 0x6 App Fn, 0x00 - lun, 0x1 - get device id
+ME_GET_DEVICE_ID="1 6 0 0x1 0"
+
+echo "Bios upgrade started at $(date)"
+
+power_status() {
+ st=$(busctl get-property xyz.openbmc_project.State.Chassis /xyz/openbmc_project/state/chassis0 xyz.openbmc_project.State.Chassis CurrentPowerState | cut -d"." -f6)
+ if [ "$st" == "On\"" ]; then
+ echo "on"
+ else
+ echo "off"
+ fi
+}
+
+power_off() {
+ echo "Shutting down Server"
+ busctl set-property xyz.openbmc_project.State.Chassis /xyz/openbmc_project/state/chassis0 xyz.openbmc_project.State.Chassis RequestedPowerTransition s xyz.openbmc_project.State.Chassis.Transition.Off
+ # shellcheck disable=SC2034
+ for i in {1..10}; do
+ if [ "$(power_status)" == "off" ]; then
+ break
+ else
+ sleep 1
+ fi
+ done
+
+ if [ "$(power_status)" != "off" ]; then
+ echo "Failed to power off Server"
+ exit 1
+ fi
+}
+
+power_on() {
+ echo "Powering on Server"
+ busctl set-property xyz.openbmc_project.State.Chassis /xyz/openbmc_project/state/chassis0 xyz.openbmc_project.State.Chassis RequestedPowerTransition s xyz.openbmc_project.State.Chassis.Transition.On
+ # shellcheck disable=SC2034
+ for i in {1..10}; do
+ if [ "$(power_status)" == "on" ]; then
+ break
+ else
+ sleep 1
+ fi
+ done
+
+ if [ "$(power_status)" != "on" ]; then
+ echo "Failed to power on Server"
+ exit 1
+ fi
+}
+
+me_wait_poweron() {
+ echo "Wait for ME firmware to start"
+ # shellcheck disable=SC2034
+ for i in {1..10}; do
+ # shellcheck disable=SC2086
+ if ! busctl call --timeout=1 "$IPMB_OBJ" "$IPMB_PATH" "$IPMB_INTF" sendRequest yyyyay $ME_GET_DEVICE_ID 2>/dev/null; then
+ sleep 1
+ else
+ break
+ fi
+ done
+ # shellcheck disable=SC2086
+ if ! busctl call --timeout=1 "$IPMB_OBJ" "$IPMB_PATH" "$IPMB_INTF" sendRequest yyyyay $ME_GET_DEVICE_ID 2>/dev/null; then
+ echo "Failed to communicate with SPS firmware"
+ exit 1
+ fi
+}
+
+me_force_recovery_mode() {
+ # Set ME to recovery mode
+ echo "Set ME to recovery mode"
+ # shellcheck disable=SC2086
+ busctl call "$IPMB_OBJ" "$IPMB_PATH" "$IPMB_INTF" sendRequest yyyyay $ME_CMD_RECOVER
+}
+
+me_reset() {
+ #Reset ME to boot from new bios
+ echo "Reset ME to boot from new firmware"
+ # shellcheck disable=SC2086
+ busctl call "$IPMB_OBJ" "$IPMB_PATH" "$IPMB_INTF" sendRequest yyyyay $ME_CMD_RESET
+}
+
+# Power off PCH
+power_off
+
+# Enable FM_FLASH_SEC_OVRD
+# shellcheck disable=SC2046 # Intended splitting of OPTIONS
+gpioset $(gpiofind FM_FLASH_SEC_OVRD)=1
+
+# Power on PCH
+power_on
+
+me_wait_poweron
+
+me_force_recovery_mode
+
+#Flashcp image to device.
+if [ -e "$IMAGE_FILE" ];
+then
+ echo "Bios image is $IMAGE_FILE"
+ flashrom -p linux_mtd:dev=12 -w "$IMAGE_FILE"
+else
+ echo "Bios image $IMAGE_FILE doesn't exist"
+fi
+
+# Reset ME
+me_reset
+
+sleep 5
+
+# Power off PCH
+power_off
+
+# Disable FM_FLASH_SEC_OVRD
+# shellcheck disable=SC2046 # Intended splitting of OPTIONS
+gpioset $(gpiofind FM_FLASH_SEC_OVRD)=0
+
diff --git a/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager/obmc-flash-host-bios@.service b/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager/obmc-flash-host-bios@.service
new file mode 100644
index 0000000..7e09890
--- /dev/null
+++ b/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager/obmc-flash-host-bios@.service
@@ -0,0 +1,7 @@
+[Unit]
+Description=Flash Host Bios image %I to Host
+
+[Service]
+Type=oneshot
+RemainAfterExit=no
+ExecStart=/usr/sbin/bios-update.sh /tmp/images/%i
diff --git a/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager_%.bbappend b/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager_%.bbappend
new file mode 100644
index 0000000..640c3e3
--- /dev/null
+++ b/meta-ibm/meta-sbp1/recipes-phosphor/flash/phosphor-software-manager_%.bbappend
@@ -0,0 +1,10 @@
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+SRC_URI += "file://bios-update.sh"
+
+PACKAGECONFIG:append = " flash_bios"
+RDEPENDS:${PN} += "bash flashrom phosphor-ipmi-ipmb"
+
+do_install:append() {
+ install -d ${D}/${sbindir}
+ install -m 0755 ${WORKDIR}/bios-update.sh ${D}/${sbindir}/
+}