reset upstream subtrees to yocto 2.6
Reset the following subtrees on thud HEAD:
poky: 87e3a9739d
meta-openembedded: 6094ae18c8
meta-security: 31dc4e7532
meta-raspberrypi: a48743dc36
meta-xilinx: c42016e2e6
Also re-apply backports that didn't make it into thud:
poky:
17726d0 systemd-systemctl-native: handle Install wildcards
meta-openembedded:
4321a5d libtinyxml2: update to 7.0.1
042f0a3 libcereal: Add native and nativesdk classes
e23284f libcereal: Allow empty package
030e8d4 rsyslog: curl-less build with fmhttp PACKAGECONFIG
179a1b9 gtest: update to 1.8.1
Squashed OpenBMC subtree compatibility updates:
meta-aspeed:
Brad Bishop (1):
aspeed: add yocto 2.6 compatibility
meta-ibm:
Brad Bishop (1):
ibm: prepare for yocto 2.6
meta-ingrasys:
Brad Bishop (1):
ingrasys: set layer compatibility to yocto 2.6
meta-openpower:
Brad Bishop (1):
openpower: set layer compatibility to yocto 2.6
meta-phosphor:
Brad Bishop (3):
phosphor: set layer compatibility to thud
phosphor: libgpg-error: drop patches
phosphor: react to fitimage artifact rename
Ed Tanous (4):
Dropbear: upgrade options for latest upgrade
yocto2.6: update openssl options
busybox: remove upstream watchdog patch
systemd: Rebase CONFIG_CGROUP_BPF patch
Change-Id: I7b1fe71cca880d0372a82d94b5fd785323e3a9e7
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
index 628ec6c..136efb9 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
@@ -7,13 +7,11 @@
require conf/machine/include/tune-zynqmp.inc
require conf/machine/include/machine-xilinx-overrides.inc
require conf/machine/include/machine-xilinx-default.inc
-require conf/machine/include/machine-xilinx-board.inc
-include conf/machine/include/zynqmp-pmu-config.inc
MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
UBOOT_MACHINE = "xilinx_zynqmp_zcu106_revA_defconfig"
-SPL_BINARY = "spl/boot.bin"
+SPL_BINARY ?= "spl/boot.bin"
SERIAL_CONSOLE = "115200 ttyPS0"
SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
@@ -22,15 +20,20 @@
PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
-PREFERRED_PROVIDER_virtual/pmu-firmware ?= "zynqmp-pmu-pmu-firmware"
+
+PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu"
+PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu"
EXTRA_IMAGEDEPENDS += " \
u-boot-zynq-uenv \
arm-trusted-firmware \
- virtual/pmu-firmware \
virtual/boot-bin \
+ virtual/bootloader \
"
-IMAGE_BOOT_FILES += "uEnv.txt atf-uboot.ub ${KERNEL_IMAGETYPE}-zynqmp-zcu106-revA.dtb"
+IMAGE_BOOT_FILES += " \
+ uEnv.txt \
+ atf-uboot.ub \
+ "
MACHINE_HWCODECS = "libomxil-xlnx"