Gitiles
Code Review Sign In
gerrit.openbmc.org / mdmillerii / openbmc / 28670cea63363a44c2a7d4597f7075043e4e552f
commit28670cea63363a44c2a7d4597f7075043e4e552f[log] [tgz]
authorPeterHo-wiwynn <peter.ho.wiwynn@gmail.com>Mon Jul 01 16:07:01 2024 +0800
committerPatrick Williams <patrick@stwcx.xyz>Mon Jul 01 11:31:47 2024 +0000
treef369aca9d84abc05eb26e7f53c7e0b3951bd4067
parentb0f22c16f260d4ac5fd1f1bbf53afc819860d693 [diff]
meta-facebook: yosemite4: Add 99-platform-init

Port 99-platform-init from bletchley to enable alternate boot.

Tested:
- FMC_WDT2 is enabled and timer is counting down:
```
U-Boot SPL 2019.04 yosemite4-runtime-addc-test (Mar 25 2024 - 04:43:19 +0000)
already initialized, Trying to boot from RAM

U-Boot 2019.04 yosemite4-runtime-addc-test (Mar 25 2024 - 04:43:19 +0000)

SOC: AST2620-A3
RST: WDT1 SOC
PCI RST: #2
RST: External
FMC 2nd Boot (ABR): Enable, Dual flashes, Source: Primary
Set FMC_WDT2 timer reload value to 0x0BB8
eSPI Mode: SIO:Enable : SuperIO-2e
Eth: MAC0: RMII/NCSI, MAC1: RMII/NCSI, MAC2: RMII/NCSI, MAC3: RMII/NCSI
Model: AST2600 EVB
DRAM:  already initialized, 1 GiB (capacity:1024 MiB, VGA:0 MiB, ECC:off)
MMC:

sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0
Loading Environment from SPI Flash... SF: Detected mx66l1g45g with page size 256 Bytes, erase size 4 KiB, total 128 MiB
OK
In:    serial@1e784000
Out:   serial@1e784000
Err:   serial@1e784000
Model: AST2600 EVB
Net:   No MDIO found.
No ethernet found.
Hit any key to stop autoboot:  0
ast# md.l 0x1e620064 2
1e620064: 00000001 0b0a0bb8                      ........
ast# md.l 0x1e620064 2
```
- Boot from alternate flash when timeout occured:
```
U-Boot 2019.04 yosemite4-runtime-addc-test (Mar 25 2024 - 04:43:19 +0000)

SOC: AST2620-A3
PCI RST: #2
RST: SYS_FLASH_ABR_RESET
FMC 2nd Boot (ABR): Enable, Dual flashes, Source: Alternate
Set FMC_WDT2 timer reload value to 0x0BB8
eSPI Mode: SIO:Enable : SuperIO-2e
Eth: MAC0: RMII/NCSI, MAC1: RMII/NCSI, MAC2: RMII/NCSI, MAC3: RMII/NCSI
Model: AST2600 EVB
DRAM:  already initialized, 1 GiB (capacity:1024 MiB, VGA:0 MiB, ECC:off)
MMC:

...

root@bmc:~# devmem 0x1e620064
0x00000110
root@bmc:~# devmem 0x1e620068
0x0BB80BB8
root@bmc:~# cat /run/media/slot
1
```

Change-Id: I524eae906526c16469f1dd2d0927c289c35a7380
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
2 files changed
tree: f369aca9d84abc05eb26e7f53c7e0b3951bd4067
  1. .github/
  2. meta-amd/
  3. meta-ampere/
  4. meta-arm/
  5. meta-aspeed/
  6. meta-asrock/
  7. meta-bytedance/
  8. meta-delta/
  9. meta-evb/
  10. meta-facebook/
  11. meta-fii/
  12. meta-google/
  13. meta-hpe/
  14. meta-ibm/
  15. meta-ieisystems/
  16. meta-ingrasys/
  17. meta-intel-openbmc/
  18. meta-inventec/
  19. meta-nuvoton/
  20. meta-openembedded/
  21. meta-openpower/
  22. meta-phosphor/
  23. meta-qualcomm/
  24. meta-quanta/
  25. meta-raspberrypi/
  26. meta-security/
  27. meta-supermicro/
  28. meta-tyan/
  29. meta-ufispace/
  30. meta-wistron/
  31. meta-yadro/
  32. poky/
  33. .templateconf ⇨ poky/.templateconf
  34. bitbake ⇨ poky/bitbake/
  35. LICENSE ⇨ poky/LICENSE
  36. meta ⇨ poky/meta
  37. oe-init-build-env ⇨ poky/oe-init-build-env
  38. scripts ⇨ poky/scripts/
  39. .eslintrc.json
  40. .gitignore
  41. .gitreview
  42. openbmc-env
  43. OWNERS
  44. README.md
  45. setup
README.md

OpenBMC

Build Status

OpenBMC is a Linux distribution for management controllers used in devices such as servers, top of rack switches or RAID appliances. It uses Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your platform.

Setting up your OpenBMC project

1) Prerequisite

See the Yocto documentation for the latest requirements

Ubuntu

sudo apt install git python3-distutils gcc g++ make file wget \
    gawk diffstat bzip2 cpio chrpath zstd lz4 bzip2

Fedora

sudo dnf install git python3 gcc g++ gawk which bzip2 chrpath cpio \
    hostname file diffutils diffstat lz4 wget zstd rpcgen patch

2) Download the source

git clone https://github.com/openbmc/openbmc
cd openbmc

3) Target your hardware

Any build requires an environment set up according to your hardware target. There is a special script in the root of this repository that can be used to configure the environment as needed. The script is called setup and takes the name of your hardware target as an argument.

The script needs to be sourced while in the top directory of the OpenBMC repository clone, and, if run without arguments, will display the list of supported hardware targets, see the following example:

$ . setup <machine> [build_dir]
Target machine must be specified. Use one of:

ahe50dc                 harma                   s7106
bletchley               kudo                    s8036
daytonax                lannister               sbp1
dl360-g11               minerva                 spc621d8hm3
dl360poc                mori                    starscream
dl385-g11               mtjade                  system1
e3c246d4i               mtmitchell              tatlin-archive-x86
e3c256d4i               ncplite                 tiogapass
ethanolx                nicole                  transformers
evb-ast2500             olympus-nuvoton         vegman-n110
evb-ast2600             p10bmc                  vegman-rx20
evb-npcm750             palmetto                vegman-sx20
evb-npcm845             qcom-dc-scm-v1          witherspoon
f0b                     quanta-q71l             witherspoon-tacoma
fp5280g3                rl300-g11               x11spi
g220a                   romed8hm3               yosemite4
gbs                     romulus                 yosemitev2
genesis3                s2600wf                 zaius
greatlakes              s6q

Once you know the target (e.g. romulus), source the setup script as follows:

. setup romulus

4) Build

bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

OpenBMC Development

The OpenBMC community maintains a set of tutorials new users can go through to get up to speed on OpenBMC development out here

Build Validation and Testing

Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.

Questions

First, please do a search on the internet. There's a good chance your question has already been asked.

For general questions, please use the openbmc tag on Stack Overflow. Please review the discussion on Stack Overflow licensing before posting any code.

For technical discussions, please see contact info below for Discord and mailing list information. Please don't file an issue to ask a question. You'll get faster results by using the mailing list or Discord.

Will OpenBMC run on my Acme Server Corp. XYZ5000 motherboard?

This is a common question, particularly regarding boards from popular COTS (commercial off-the-shelf) vendors such as Supermicro and ASRock. You can see the list of supported boards by running . setup (with no further arguments) in the root of the OpenBMC source tree. Most of the platforms supported by OpenBMC are specialized servers operated by companies running large datacenters, but some more generic COTS servers are supported to varying degrees.

If your motherboard is not listed in the output of . setup it is not currently supported. Porting OpenBMC to a new platform is a non-trivial undertaking, ideally done with the assistance of schematics and other documentation from the manufacturer (it is not completely infeasible to take on a porting effort without documentation via reverse engineering, but it is considerably more difficult, and probably involves a greater risk of hardware damage).

However, even if your motherboard is among those listed in the output of . setup, there are two significant caveats to bear in mind. First, not all ports are equally mature -- some platforms are better supported than others, and functionality on some "supported" boards may be fairly limited. Second, support for a motherboard is not the same as support for a complete system -- in particular, fan control is critically dependent on not just the motherboard but also the fans connected to it and the chassis that the board and fans are housed in, both of which can vary dramatically between systems using the same board model. So while you may be able to compile and install an OpenBMC build on your system and get some basic functionality, rough edges (such as your cooling fans running continuously at full throttle) are likely.

Features of OpenBMC

Feature List

  • Host management: Power, Cooling, LEDs, Inventory, Events, Watchdog
  • Full IPMI 2.0 Compliance with DCMI
  • Code Update Support for multiple BMC/BIOS images
  • Web-based user interface
  • REST interfaces
  • D-Bus based interfaces
  • SSH based SOL
  • Remote KVM
  • Hardware Simulation
  • Automated Testing
  • User management
  • Virtual media

Features In Progress

  • OpenCompute Redfish Compliance
  • Verified Boot

Features Requested but need help

  • OpenBMC performance monitoring

Finding out more

Dive deeper into OpenBMC by opening the docs repository.

Technical Steering Committee

The Technical Steering Committee (TSC) guides the project. Members are:

  • Benjamin Fair, Google
  • Patrick Williams, Meta
  • Roxanne Clarke, IBM
  • Sagar Dharia, Microsoft
  • Samer El-Haj-Mahmoud, Arm
  • Terry Duncan, Intel

Contact