commit 286d45cc649a5b852a27b48e61b51bf75e9d1cee
author Brad Bishop <bradleyb@fuzziesquirrel.com> Tue Oct 02 15:21:57 2018 -0400
committer Brad Bishop <bradleyb@fuzziesquirrel.com> Tue Oct 02 15:25:59 2018 -0400
tree 90095cb0d2c571fd8de164caf2ca2f2e4d3f7247
parent d4b38429f6dec208547bf3d250a0c06f5d0fbcb2

Add meta-xilinx subtree

Import git://git.yoctoproject.org/meta-xilinx from 5fccc46503 as
meta-xilinx subtree.

Change-Id: I3d59bcf3a57cee588aab7f5cdd0287af66450c8a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>

meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts

diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts
new file mode 100644
index 0000000..4ec64f5
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/picozed-zynq7.dts
@@ -0,0 +1,98 @@
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+/include/ "zynq-7000-qspi-dummy.dtsi"
+
+/ {
+	model = "Avnet picoZed";
+	compatible = "avnet,picozed", "xlnx,zynq-7000";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		reset-gpios = <&gpio0 7 1>; /* MIO 7, GPIO_ACTIVE_LOW */
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@0 {
+		compatible = "marvell,88e1512";
+		device_type = "ethernet-phy";
+		reg = <0>;
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	/* SD1 is onnected to a non-removable eMMC flash device */
+	non-removable;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&qspi {
+	status = "okay";
+	primary_flash: ps7-qspi@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,m25p80", "spansion,s25fl128s", "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		/* Example 16M partition table using U-Boot + U-Boot SPL */
+		partition@0x0 {
+			label = "boot";
+			reg = <0x0 0xe0000>;
+		};
+		partition@0xe0000 {
+			label = "ubootenv";
+			reg = <0xe0000 0x20000>;
+		};
+		partition@0x100000 {
+			label = "uboot";
+			reg = <0x100000 0x100000>;
+		};
+		partition@0x200000 {
+			label = "kernel";
+			reg = <0x200000 0x4f0000>;
+		};
+		partition@0x6f0000 {
+			label = "devicetree";
+			reg = <0x6f0000 0x10000>;
+		};
+		partition@0x700000 {
+			label = "rootfs";
+			reg = <0x700000 0x400000>;
+		};
+		partition@0xb00000 {
+			label = "spare";
+			reg = <0xb00000 0x500000>;
+		};
+	};
+};
+