Add meta-xilinx subtree
Import git://git.yoctoproject.org/meta-xilinx from 5fccc46503 as
meta-xilinx subtree.
Change-Id: I3d59bcf3a57cee588aab7f5cdd0287af66450c8a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.dts b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.dts
new file mode 100644
index 0000000..1965439
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/device-tree/files/zybo-linux-bd-zynq7/zybo-linux-bd-zynq7.dts
@@ -0,0 +1,184 @@
+/dts-v1/;
+/include/ "skeleton.dtsi"
+/include/ "zynq-7000.dtsi"
+/include/ "zynq-7000-qspi-dummy.dtsi"
+/include/ "pcw.dtsi"
+/include/ "pl.dtsi"
+
+/ {
+ model = "Digilent-Zybo-Linux-BD-v2015.4";
+ aliases {
+ serial0 = &uart1;
+ ethernet0 = &gem0;
+ spi0 = &qspi;
+ };
+ chosen {
+ bootargs = "";
+ stdout-path = "serial0:115200n8";
+ };
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ btn4 {
+ label = "btn4";
+ gpios = <&gpio0 50 0>;
+ linux,code = <108>; /* down */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ btn5 {
+ label = "btn5";
+ gpios = <&gpio0 51 0>;
+ linux,code = <103>; /* up */
+ gpio-key,wakeup;
+ autorepeat;
+ };
+ };
+
+ usb_phy0: usb_phy@0 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ reset-gpios = <&gpio0 46 1>;
+ };
+};
+
+&amba {
+ u-boot,dm-pre-reloc;
+};
+
+&amba_pl {
+ encoder_0: digilent_encoder {
+ compatible = "digilent,drm-encoder";
+ dglnt,edid-i2c = <&i2c1>;
+ };
+
+ xilinx_drm {
+ compatible = "xlnx,drm";
+ xlnx,vtc = <&v_tc_0>;
+ xlnx,connector-type = "HDMIA";
+ xlnx,encoder-slave = <&encoder_0>;
+ clocks = <&axi_dynclk_0>;
+ planes {
+ xlnx,pixel-format = "xrgb8888";
+ plane0 {
+ dmas = <&axi_vdma_0 0>;
+ dma-names = "dma0";
+ };
+ };
+ };
+
+ i2s_clk: i2s_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <12288000>;
+ clock-output-names = "i2s_clk";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "ZYBO-Sound-Card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink0_master>;
+ simple-audio-card,frame-master = <&dailink0_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Headphone", "Headphone Jack",
+ "Line", "Line In Jack";
+ simple-audio-card,routing =
+ "MICIN", "Microphone Jack",
+ "Headphone Jack", "LHPOUT",
+ "Headphone Jack", "RHPOUT",
+ "LLINEIN", "Line In Jack",
+ "RLINEIN", "Line In Jack";
+ dailink0_master: simple-audio-card,cpu {
+ clocks = <&i2s_clk>;
+ sound-dai = <&axi_i2s_adi_0>;
+ };
+ simple-audio-card,codec {
+ clocks = <&i2s_clk>;
+ sound-dai = <&ssm2603>;
+ };
+ };
+};
+
+&axi_dynclk_0 {
+ compatible = "digilent,axi-dynclk";
+ #clock-cells = <0>;
+ clocks = <&clkc 15>;
+};
+
+&axi_i2s_adi_0 {
+ #sound-dai-cells = <0>;
+ compatible = "adi,axi-i2s-1.00.a";
+ clocks = <&clkc 15>, <&i2s_clk>;
+ clock-names = "axi", "ref";
+ dmas = <&dmac_s 0 &dmac_s 1>;
+ dma-names = "tx", "rx";
+};
+
+&gem0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii-id";
+ local-mac-address = [];
+ phy0: phy@0 {
+ device_type = "ethernet-phy";
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ eeprom@50 {
+ /* Microchip 24AA02E48 */
+ compatible = "microchip,24c02";
+ reg = <0x50>;
+ };
+
+ ssm2603: ssm2603@1a{
+ #sound-dai-cells = <0>;
+ compatible = "adi,ssm2603";
+ reg = <0x1a>;
+ };
+};
+
+&qspi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ flash0: flash@0 {
+ compatible = "micron,m25p80", "s25fl128s";
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <50000000>;
+ partition@0x00000000 {
+ label = "boot";
+ reg = <0x00000000 0x00300000>;
+ };
+ partition@0x00300000 {
+ label = "bootenv";
+ reg = <0x00300000 0x00020000>;
+ };
+ partition@0x00320000 {
+ label = "kernel";
+ reg = <0x00320000 0x00a80000>;
+ };
+ partition@0x00da0000 {
+ label = "spare";
+ reg = <0x00da0000 0x00000000>;
+ };
+ };
+};
+
+&usb0 {
+ usb-phy = <&usb_phy0>;
+};
+
+&v_tc_0 {
+ compatible = "xlnx,v-tc-5.01.a";
+};