Add meta-xilinx subtree
Import git://git.yoctoproject.org/meta-xilinx from 5fccc46503 as
meta-xilinx subtree.
Change-Id: I3d59bcf3a57cee588aab7f5cdd0287af66450c8a
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch b/meta-xilinx/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch
new file mode 100644
index 0000000..0bc0117
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.30/0008-Add-new-MicroBlaze-bit-field-instructions.patch
@@ -0,0 +1,232 @@
+From 5c4dacaae2ba93569c1d37cda9859c57d6649dc0 Mon Sep 17 00:00:00 2001
+From: Nagaraju Mekala <nagaraju.mekala@xilinx.com>
+Date: Mon, 28 Aug 2017 19:54:01 -0700
+Subject: [PATCH] Add new MicroBlaze bit-field instructions
+
+This patches adds new bsefi and bsifi instructions. BSEFI- The
+instruction shall extract a bit field from a register and place it
+right-adjusted in the destination register. The other bits in the
+destination register shall be set to zero BSIFI- The instruction shall
+insert a right-adjusted bit field from a register at another position in
+the destination register. The rest of the bits in the destination
+register shall be unchanged
+
+Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com>
+Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
+Upstream-Status: Pending
+---
+ gas/config/tc-microblaze.c | 71 +++++++++++++++++++++++++++++++++++++++++++++-
+ opcodes/microblaze-dis.c | 16 +++++++++++
+ opcodes/microblaze-opc.h | 12 +++++++-
+ opcodes/microblaze-opcm.h | 6 +++-
+ 4 files changed, 102 insertions(+), 3 deletions(-)
+
+diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
+index e135547e62..34cb80fac2 100644
+--- a/gas/config/tc-microblaze.c
++++ b/gas/config/tc-microblaze.c
+@@ -909,7 +909,7 @@ md_assemble (char * str)
+ unsigned reg2;
+ unsigned reg3;
+ unsigned isize;
+- unsigned int immed, temp;
++ unsigned int immed, immed2, temp;
+ expressionS exp;
+ char name[20];
+
+@@ -1164,7 +1164,76 @@ md_assemble (char * str)
+ inst |= (reg2 << RA_LOW) & RA_MASK;
+ inst |= (immed << IMM_LOW) & IMM5_MASK;
+ break;
++ case INST_TYPE_RD_R1_IMM5_IMM5:
++ if (strcmp (op_end, ""))
++ op_end = parse_reg (op_end + 1, ®1); /* Get rd. */
++ else
++ {
++ as_fatal (_("Error in statement syntax"));
++ reg1 = 0;
++ }
++ if (strcmp (op_end, ""))
++ op_end = parse_reg (op_end + 1, ®2); /* Get r1. */
++ else
++ {
++ as_fatal (_("Error in statement syntax"));
++ reg2 = 0;
++ }
++
++ /* Check for spl registers. */
++ if (check_spl_reg (®1))
++ as_fatal (_("Cannot use special register with this instruction"));
++ if (check_spl_reg (®2))
++ as_fatal (_("Cannot use special register with this instruction"));
+
++ /* Width immediate value. */
++ if (strcmp (op_end, ""))
++ op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
++ else
++ as_fatal (_("Error in statement syntax"));
++ if (exp.X_op != O_constant)
++ {
++ as_warn (_("Symbol used as immediate width value for bit field instruction"));
++ immed = 1;
++ }
++ else
++ immed = exp.X_add_number;
++ if (opcode->instr == bsefi && immed > 31)
++ as_fatal (_("Width value must be less than 32"));
++
++ /* Shift immediate value. */
++ if (strcmp (op_end, ""))
++ op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
++ else
++ as_fatal (_("Error in statement syntax"));
++ if (exp.X_op != O_constant)
++ {
++ as_warn (_("Symbol used as immediate shift value for bit field instruction"));
++ immed2 = 0;
++ }
++ else
++ {
++ output = frag_more (isize);
++ immed2 = exp.X_add_number;
++ }
++ if (immed2 != (immed2 % 32))
++ {
++ as_warn (_("Shift value greater than 32. using <value %% 32>"));
++ immed2 = immed2 % 32;
++ }
++
++ /* Check combined value. */
++ if (immed + immed2 > 32)
++ as_fatal (_("Width value + shift value must not be greater than 32"));
++
++ inst |= (reg1 << RD_LOW) & RD_MASK;
++ inst |= (reg2 << RA_LOW) & RA_MASK;
++ if (opcode->instr == bsefi)
++ inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
++ else
++ inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
++ inst |= (immed2 << IMM_LOW) & IMM5_MASK;
++ break;
+ case INST_TYPE_R1_R2:
+ if (strcmp (op_end, ""))
+ op_end = parse_reg (op_end + 1, ®1); /* Get r1. */
+diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
+index 6a174b0eb9..80a47ad2fc 100644
+--- a/opcodes/microblaze-dis.c
++++ b/opcodes/microblaze-dis.c
+@@ -73,6 +73,18 @@ get_field_imm5_mbar (long instr)
+ return(strdup(tmpstr));
+ }
+
++static char *
++get_field_imm5width (long instr)
++{
++ char tmpstr[25];
++
++ if (instr & 0x00004000)
++ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
++ else
++ sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
++ return (strdup (tmpstr));
++}
++
+ static char *
+ get_field_rfsl (long instr)
+ {
+@@ -396,6 +408,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
+ /* For mbar 16 or sleep insn. */
+ case INST_TYPE_NONE:
+ break;
++ /* For bit field insns. */
++ case INST_TYPE_RD_R1_IMM5_IMM5:
++ print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst),get_field_r1(inst),get_field_imm5width (inst), get_field_imm5 (inst));
++ break;
+ /* For tuqula instruction */
+ case INST_TYPE_RD:
+ print_func (stream, "\t%s", get_field_rd (inst));
+diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
+index a64f8362da..afb34989d9 100644
+--- a/opcodes/microblaze-opc.h
++++ b/opcodes/microblaze-opc.h
+@@ -59,6 +59,9 @@
+ /* For mbar. */
+ #define INST_TYPE_IMM5 20
+
++/* For bsefi and bsifi */
++#define INST_TYPE_RD_R1_IMM5_IMM5 21
++
+ #define INST_TYPE_NONE 25
+
+
+@@ -89,7 +92,9 @@
+ #define OPCODE_MASK_H124 0xFFFF07FF /* High 16, and low 11 bits. */
+ #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits. */
+ #define OPCODE_MASK_H3 0xFC000600 /* High 6 bits and bits 21, 22. */
++#define OPCODE_MASK_H3B 0xFC00C600 /* High 6 bits and bits 16, 17, 21, 22. */
+ #define OPCODE_MASK_H32 0xFC00FC00 /* High 6 bits and bit 16-21. */
++#define OPCODE_MASK_H32B 0xFC00C000 /* High 6 bits and bit 16, 17. */
+ #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits. */
+ #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits. */
+ #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26. */
+@@ -102,7 +107,7 @@
+ #define DELAY_SLOT 1
+ #define NO_DELAY_SLOT 0
+
+-#define MAX_OPCODES 299
++#define MAX_OPCODES 301
+
+ struct op_code_struct
+ {
+@@ -159,6 +164,8 @@ struct op_code_struct
+ {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
+ {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
+ {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
++ {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
++ {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
+ {"or", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
+ {"and", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
+ {"xor", INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
+@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
+ #define MIN_IMM5 ((int) 0x00000000)
+ #define MAX_IMM5 ((int) 0x0000001f)
+
++#define MIN_IMM_WIDTH ((int) 0x00000001)
++#define MAX_IMM_WIDTH ((int) 0x00000020)
++
+ #endif /* MICROBLAZE_OPC */
+
+diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
+index 21a3dc8d76..dd6be7f65c 100644
+--- a/opcodes/microblaze-opcm.h
++++ b/opcodes/microblaze-opcm.h
+@@ -29,7 +29,7 @@ enum microblaze_instr
+ addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
+ mulh, mulhu, mulhsu,swapb,swaph,
+ idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
+- ncget, ncput, muli, bslli, bsrai, bsrli, mului,
++ ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
+ /* 'or/and/xor' are C++ keywords. */
+ microblaze_or, microblaze_and, microblaze_xor,
+ andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
+@@ -129,6 +129,7 @@ enum microblaze_instr_type
+ #define RB_LOW 11 /* Low bit for RB. */
+ #define IMM_LOW 0 /* Low bit for immediate. */
+ #define IMM_MBAR 21 /* low bit for mbar instruction. */
++#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
+
+ #define RD_MASK 0x03E00000
+ #define RA_MASK 0x001F0000
+@@ -141,6 +142,9 @@ enum microblaze_instr_type
+ /* Imm mask for mbar. */
+ #define IMM5_MBAR_MASK 0x03E00000
+
++/* Imm mask for extract/insert width. */
++#define IMM5_WIDTH_MASK 0x000007C0
++
+ /* FSL imm mask for get, put instructions. */
+ #define RFSL_MASK 0x000000F
+
+--
+2.15.0
+