diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/device-tree.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/device-tree.bbappend
new file mode 100644
index 0000000..d9535da
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/device-tree.bbappend
@@ -0,0 +1,6 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+# device tree sources for MiniZed
+COMPATIBLE_MACHINE_minized-zynq7 = ".*"
+SRC_URI_append_minized-zynq7 = " file://minized-zynq7.dts"
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts
new file mode 100644
index 0000000..4570fa6
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts
@@ -0,0 +1,254 @@
+/*
+* dts file for MiniZed
+*
+* Copyright (C) 2018 Clément Laigle <clement.laigle8@gmail.com>
+*/
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+
+/ {
+	model = "Zynq Minized Board";
+	compatible = "xlnx,zynq-Minized", "xlnx,zynq-7000";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			operating-points = <666666 1000000 333333 1000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+                serial1 = &bluetooth_uart;
+		spi0 = &qspi;
+		mmc0 = &sdhci1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0x0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-psg {
+			label = "led-psg";
+			gpios = <&gpio0 53 0>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-psr {
+			label = "led-psr";
+			gpios = <&gpio0 52 0>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw3 {
+			label = "ps-bp";
+			gpios = <&gpio0 0 0>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
+	amba_pl: amba_pl {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges ;
+
+		axi_gpio_0: gpio@41200000 {
+			#gpio-cells = <2>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller ;
+			reg = <0x41200000 0x10000>;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x1>;
+			xlnx,all-outputs-2 = <0x1>;
+			xlnx,dout-default = <0x00000000>;
+			xlnx,dout-default-2 = <0x00000000>;
+			xlnx,gpio-width = <0x1>;
+			xlnx,gpio2-width = <0x1>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x1>;
+			xlnx,tri-default = <0xFFFFFFFF>;
+			xlnx,tri-default-2 = <0xFFFFFFFF>;
+		};
+		axi_gpio_1: gpio@41210000 {
+			#gpio-cells = <2>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller ;
+			reg = <0x41210000 0x10000>;
+			xlnx,all-inputs = <0x1>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x0>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x00000000>;
+			xlnx,dout-default-2 = <0x00000000>;
+			xlnx,gpio-width = <0x1>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xFFFFFFFF>;
+			xlnx,tri-default-2 = <0xFFFFFFFF>;
+		};
+		axi_iic_0: i2c@41600000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-names = "ref_clk";
+			clocks = <&clkc 15>;
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&intc>;
+			interrupts = <0 30 4>;
+			reg = <0x41600000 0x10000>;
+		};
+		bluetooth_uart: serial@43c00000 {
+			clock-frequency = <0x2dc6c00>;
+			clock-names = "ref_clk";
+			clocks = <&clkc 0>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 4>;
+			port-number = <1>;
+			reg = <0x43c00000 0x10000>;
+			reg-offset = <0x1000>;
+			reg-shift = <2>;
+			xlnx,external-xin-clk-hz = <0x2dc6c00>;
+			xlnx,external-xin-clk-hz-d = <0x30>;
+			xlnx,has-external-rclk = <0x0>;
+			xlnx,has-external-xin = <0x1>;
+			xlnx,is-a-16550 = <0x1>;
+			xlnx,s-axi-aclk-freq-hz-d = "100.0";
+			xlnx,use-modem-ports = <0x1>;
+			xlnx,use-user-ports = <0x1>;
+		};
+	};
+
+	wlreg_on: wlreg-on {
+		compatible = "regulator-fixed";
+		regulator-name = "wlreg_on";
+		enable-active-high;
+		gpio = <&gpio0 56 0>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+&gpio0 {
+	emio-gpio-width = <4>;
+	gpio-mask-high = <0x0>;
+	gpio-mask-low = <0x5600>;
+};
+
+&intc {
+	num_cpus = <1>;
+	num_interrupts = <96>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width= <4>;
+	xlnx,has-cd = <0x0>;
+	xlnx,has-power = <0x0>;
+	xlnx,has-wp = <0x0>;
+	non-removeable;
+	broken-cd;
+	vmmc-supply = <&wlreg_on>;
+
+        brcmf: brcmf@1 {
+		status = "okay";
+                reg = <1>;
+                compatible = "brcm,bcm43430-fmac";
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <12000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+		broken-hpi;
+	};
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-reset = <&gpio0 7 0>;
+	usb-phy = <&usb_phy0>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupt-parent = <0x3>;
+	is-dual = <0x0>;
+	num-cs = <0x1>;
+
+
+	flash0: flash@0 {
+		compatible = "micron,m25p80";
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+
+		partition@0x00000000 {
+			label = "boot";
+			reg = <0x0 0xff0000>;
+		};
+		partition@0x00270000 {
+			label = "kernel";
+			reg = <0x270000 0xd80000>;
+		};
+		partition@0x00ff0000 {
+			label = "bootenv";
+			reg = <0xff0000 0x10000>;
+		};
+		
+		partition@0x01000000 {
+			label = "spare";
+			reg = <0x1000000 0x0>;
+		};
+
+	};
+};
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/reference-design/zybo-linux-bd.bb b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/reference-design/zybo-linux-bd.bb
new file mode 100644
index 0000000..be68918
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/reference-design/zybo-linux-bd.bb
@@ -0,0 +1,66 @@
+SUMMARY = "The reference design for zybo-linux-bd"
+DESCRIPTION = "Contains the Reference Design Files and hardware software \
+hand-off file. The HDF provides bitstream and Xilinx ps7_init_gpl.c/h \
+platform headers."
+SECTION = "bsp"
+
+DEPENDS += "unzip-native"
+
+LICENSE = "Proprietary"
+LIC_FILES_CHKSUM = "file://Projects/${HW_BD}/readme.txt;md5=e1cb7639bf00b6e730ff3a7f13714951"
+
+COMPATIBLE_MACHINE = "zybo-linux-bd-zynq7"
+
+HW_BD = "linux_bd"
+
+SRC_URI = "git://github.com/Digilent/ZYBO.git;protocol=https;nobranch=1"
+SRCREV = "63ca49fe027da49f3b0ac636bd404fd31fbbd945"
+
+PV = "+git${SRCPV}"
+
+S = "${WORKDIR}/git"
+
+HDF = "/Projects/${HW_BD}/hw_handoff/${HW_BD}_wrapper.hdf"
+
+S ?= "${WORKDIR}/${MACHINE}"
+
+PROVIDES = "virtual/bitstream virtual/xilinx-platform-init"
+
+FILES_${PN}-platform-init += "${PLATFORM_INIT_DIR}/*"
+
+FILES_${PN}-bitstream += " \
+		download.bit \
+		"
+
+PACKAGES = "${PN}-platform-init ${PN}-bitstream"
+
+BITSTREAM ?= "bitstream-${PV}-${PR}.bit"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit xilinx-platform-init
+inherit deploy
+
+SYSROOT_DIRS += "${PLATFORM_INIT_DIR}"
+
+do_install() {
+	fn=$(unzip -l ${S}/${HDF} | awk '{print $NF}' | grep ".bit$")
+	unzip -o ${S}/${HDF} ${fn} -d ${D}
+	[ "${fn}" == "download.bit" ] || mv ${D}/${fn} ${D}/download.bit
+
+	install -d ${D}${PLATFORM_INIT_DIR}
+	for fn in ${PLATFORM_INIT_FILES}; do
+		unzip -o ${S}/${HDF} ${fn} -d ${D}${PLATFORM_INIT_DIR}
+	done
+}
+
+do_deploy () {
+	if [ -e ${D}/download.bit ]; then
+		install -d ${DEPLOYDIR}
+		install -m 0644 ${D}/download.bit ${DEPLOYDIR}/${BITSTREAM}
+		ln -sf ${BITSTREAM} ${DEPLOYDIR}/download.bit
+		# for u-boot 2016.3 with spl load bitstream patch
+		ln -sf ${BITSTREAM} ${DEPLOYDIR}/bitstream
+	fi
+}
+addtask deploy before do_build after do_install
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch
new file mode 100644
index 0000000..4b9d72b
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch
@@ -0,0 +1,217 @@
+From dfe572bcea9b74086d5bd9b963af26e64a043336 Mon Sep 17 00:00:00 2001
+From: Clement Laigle <clement.laigle8@gmail.com>
+Date: Sun, 10 Jun 2018 23:21:28 +0200
+Subject: [PATCH] zynq: Add initial support for Avnet MiniZed
+
+Initial support for Avnet MiniZed board.
+
+Signed-off-by: Clement Laigle <clement.laigle8@gmail.com>
+---
+ arch/arm/dts/Makefile          |   1 +
+ arch/arm/dts/zynq-minized.dts  | 106 +++++++++++++++++++++++++++++++++++++++++
+ configs/zynq_minized_defconfig |  68 ++++++++++++++++++++++++++
+ 3 files changed, 175 insertions(+)
+ create mode 100644 arch/arm/dts/zynq-minized.dts
+ create mode 100644 configs/zynq_minized_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index a895c70..32f9ae1 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
+ 	zynq-cse-qspi-single.dtb \
+ 	zynq-microzed.dtb \
+ 	zynq-picozed.dtb \
++	zynq-minized.dtb \
+ 	zynq-syzygy-hub.dtb \
+ 	zynq-topic-miami.dtb \
+ 	zynq-topic-miamilite.dtb \
+diff --git a/arch/arm/dts/zynq-minized.dts b/arch/arm/dts/zynq-minized.dts
+new file mode 100644
+index 0000000..3a05518
+--- /dev/null
++++ b/arch/arm/dts/zynq-minized.dts
+@@ -0,0 +1,106 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * dts file for Avnet MiniZed board
++ *
++ * (C) Copyright 2017 - 2018, Xilinx, Inc.
++ *
++ * Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
++ */
++
++/dts-v1/;
++#include "zynq-7000.dtsi"
++
++/ {
++       model = "Avnet Zynq MiniZed Development Board";
++       compatible = "avnet,minized", "xlnx,zynq-7000";
++
++       aliases {
++               serial0 = &uart1;
++               serial1 = &uart0;
++               spi0 = &qspi;
++               mmc0 = &sdhci0;
++       };
++
++       memory@0 {
++               device_type = "memory";
++               reg = <0x0 0x20000000>;
++       };
++
++       chosen {
++               bootargs = "";
++               stdout-path = "serial0:115200n8";
++       };
++
++       usb_phy0: phy0 {
++               compatible = "usb-nop-xceiv";
++               #phy-cells = <0>;
++       };
++};
++
++&qspi {
++       status = "okay";
++       is-dual = <0>;
++       num-cs = <1>;
++       flash@0 {
++               compatible = "micron,m25p128";
++               reg = <0x0>;
++               spi-tx-bus-width = <4>;
++               spi-rx-bus-width = <4>;
++               spi-max-frequency = <50000000>;
++               partitions {
++                       compatible = "fixed-partitions";
++                       #address-cells = <1>;
++                       #size-cells = <1>;
++                       partition@0 {
++                               label = "boot";
++                               reg = <0x0 0xff0000>;
++                       };
++
++                       partition@270000 {
++                               label = "kernel";
++                               reg = <0x270000 0xd80000>;
++                       };
++
++                       partition@ff0000 {
++                               label = "bootenv";
++                               reg = <0xff0000 0x10000>;
++                       };
++
++                       partition@1000000 {
++                               label = "spare";
++                               reg = <0x1000000 0x0>;
++                       };
++               };
++       };
++};
++
++&uart0 {
++       status = "okay";
++};
++
++&uart1 {
++       u-boot,dm-pre-reloc;
++       status = "okay";
++};
++
++&usb0 {
++       status = "okay";
++       dr_mode = "host";
++       usb-phy = <&usb_phy0>;
++       usb-reset = <&gpio0 7 0>; /* USB_RST_N-MIO7 */
++};
++
++&sdhci1 {
++       status = "okay";
++       non-removable;
++       bus-width = <4>;
++       max-frequency = <12000000>;
++
++       #address-cells = <1>;
++       #size-cells = <0>;
++       mmccard: mmccard@0 {
++               compatible = "mmc-card";
++               reg = <0>;
++               broken-hpi;
++       };
++};
+diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig
+new file mode 100644
+index 0000000..44d65fc
+--- /dev/null
++++ b/configs/zynq_minized_defconfig
+@@ -0,0 +1,68 @@
++CONFIG_ARM=y
++CONFIG_ARCH_ZYNQ=y
++CONFIG_SYS_TEXT_BASE=0x4000000
++CONFIG_SPL=y
++CONFIG_SPL_STACK_R_ADDR=0x200000
++CONFIG_DEFAULT_DEVICE_TREE="zynq-minized"
++CONFIG_DEBUG_UART=y
++CONFIG_DISTRO_DEFAULTS=y
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_FIT=y
++CONFIG_FIT_SIGNATURE=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_OS_BOOT=y
++CONFIG_SYS_PROMPT="Zynq> "
++CONFIG_CMD_THOR_DOWNLOAD=y
++CONFIG_CMD_DFU=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_FPGA_LOADBP=y
++CONFIG_CMD_FPGA_LOADFS=y
++CONFIG_CMD_FPGA_LOADMK=y
++CONFIG_CMD_FPGA_LOADP=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_SF=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_TFTPPUT=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_EXT4_WRITE=y
++CONFIG_ENV_IS_IN_SPI_FLASH=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_DFU_MMC=y
++CONFIG_DFU_RAM=y
++CONFIG_FPGA_XILINX=y
++CONFIG_FPGA_ZYNQPL=y
++CONFIG_DM_GPIO=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_ZYNQ=y
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_BAR=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_PHY_MARVELL=y
++CONFIG_PHY_REALTEK=y
++CONFIG_PHY_XILINX=y
++CONFIG_ZYNQ_GEM=y
++CONFIG_DEBUG_UART_ZYNQ=y
++CONFIG_DEBUG_UART_BASE=0xe0001000
++CONFIG_DEBUG_UART_CLOCK=50000000
++CONFIG_ZYNQ_SERIAL=y
++CONFIG_ZYNQ_QSPI=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_ULPI_VIEWPORT=y
++CONFIG_USB_ULPI=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
++CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
++CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
++CONFIG_CI_UDC=y
++CONFIG_USB_GADGET_DOWNLOAD=y
++CONFIG_USB_FUNCTION_THOR=y
++CONFIG_OF_EMBED=y
+-- 
+2.7.4
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend
new file mode 100644
index 0000000..2fdbdb4
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend
@@ -0,0 +1,8 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI_append = " file://minized-u-boot.patch"
+
+HAS_PLATFORM_INIT_append = " \
+		zynq_minized_config \
+		"
+