diff --git a/meta-xilinx/meta-xilinx-contrib/COPYING.MIT b/meta-xilinx/meta-xilinx-contrib/COPYING.MIT
new file mode 100644
index 0000000..89de354
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/COPYING.MIT
@@ -0,0 +1,17 @@
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
diff --git a/meta-xilinx/meta-xilinx-contrib/README.md b/meta-xilinx/meta-xilinx-contrib/README.md
new file mode 100644
index 0000000..55c9853
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/README.md
@@ -0,0 +1,42 @@
+meta-xilinx-contrib
+===================
+
+This layer is a contribution layer to support for MicroBlaze, Zynq and ZynqMP architectures.
+This layer depends on meta-xilinx-bsp layer.
+
+Supported Boards/Machines
+=========================
+
+* Zynq:
+  * Digilent Zybo Linux BD Reference design
+  * [Avnet MiniZed](conf/machine/minized-zynq7.conf) - `minized-zynq7`
+
+Maintainers, Mailing list, Patches
+==================================
+
+Please send any patches, comments or questions for this layer to
+the [meta-xilinx mailing list](https://lists.yoctoproject.org/listinfo/meta-xilinx):
+
+	meta-xilinx@lists.yoctoproject.org with '[meta-xilinx-contrib]' in the subject.
+
+
+Subscribe to mailing list at
+https://lists.yoctoproject.org/listinfo/meta-xilinx
+
+Maintainers:
+
+	Manjukumar Harthikote Matha <manjukumar.harthikote-matha@xilinx.com>
+
+Dependencies
+============
+
+This layer depends on:
+
+	URI: git://git.openembedded.org/bitbake
+
+	URI: git://git.openembedded.org/openembedded-core
+	layers: meta
+
+	URI: git://git.openembedded.org/meta-xilinx
+
+
diff --git a/meta-xilinx/meta-xilinx-contrib/conf/layer.conf b/meta-xilinx/meta-xilinx-contrib/conf/layer.conf
new file mode 100644
index 0000000..ad24877
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/conf/layer.conf
@@ -0,0 +1,16 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have a packages directory, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb"
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "xilinx-contrib"
+BBFILE_PATTERN_xilinx-contrib = "^${LAYERDIR}/"
+BBFILE_PRIORITY_xilinx-contrib = "5"
+
+LAYERDEPENDS_xilinx-contrib = "core"
+LAYERDEPENDS_xilinx-contrib = "xilinx"
+
+LAYERSERIES_COMPAT_xilinx-contrib = "sumo"
+
diff --git a/meta-xilinx/meta-xilinx-contrib/conf/machine/minized-zynq7.conf b/meta-xilinx/meta-xilinx-contrib/conf/machine/minized-zynq7.conf
new file mode 100644
index 0000000..8ee1980
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/conf/machine/minized-zynq7.conf
@@ -0,0 +1,32 @@
+#@TYPE: Machine
+#@NAME: minized-zynq7
+#@DESCRIPTION: Machine support for MiniZed. (http://www.minized.org/)
+
+require conf/machine/include/tune-zynq.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-board.inc
+
+MACHINE_FEATURES = "ext2 vfat usbhost wifi bluetooth"
+
+# u-boot configuration
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+UBOOT_MACHINE = "zynq_minized_config"
+SPL_BINARY = "spl/boot.bin"
+
+EXTRA_IMAGEDEPENDS += " \
+		u-boot-zynq-uenv \
+		virtual/boot-bin \
+		"
+
+SERIAL_CONSOLE = "115200 ttyPS0"
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "device-tree"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "linux-firmware-bcm43430"
+
+IMAGE_BOOT_FILES += " \
+		boot.bin \
+		${MACHINE}.dtb \
+		uEnv.txt \
+		"
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/device-tree.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/device-tree.bbappend
new file mode 100644
index 0000000..d9535da
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/device-tree.bbappend
@@ -0,0 +1,6 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+# device tree sources for MiniZed
+COMPATIBLE_MACHINE_minized-zynq7 = ".*"
+SRC_URI_append_minized-zynq7 = " file://minized-zynq7.dts"
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts
new file mode 100644
index 0000000..4570fa6
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/device-tree/files/minized-zynq7.dts
@@ -0,0 +1,254 @@
+/*
+* dts file for MiniZed
+*
+* Copyright (C) 2018 Clément Laigle <clement.laigle8@gmail.com>
+*/
+
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+
+/ {
+	model = "Zynq Minized Board";
+	compatible = "xlnx,zynq-Minized", "xlnx,zynq-7000";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			operating-points = <666666 1000000 333333 1000000>;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+                serial1 = &bluetooth_uart;
+		spi0 = &qspi;
+		mmc0 = &sdhci1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0x0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-psg {
+			label = "led-psg";
+			gpios = <&gpio0 53 0>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-psr {
+			label = "led-psr";
+			gpios = <&gpio0 52 0>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw3 {
+			label = "ps-bp";
+			gpios = <&gpio0 0 0>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
+	amba_pl: amba_pl {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges ;
+
+		axi_gpio_0: gpio@41200000 {
+			#gpio-cells = <2>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller ;
+			reg = <0x41200000 0x10000>;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x1>;
+			xlnx,all-outputs-2 = <0x1>;
+			xlnx,dout-default = <0x00000000>;
+			xlnx,dout-default-2 = <0x00000000>;
+			xlnx,gpio-width = <0x1>;
+			xlnx,gpio2-width = <0x1>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x1>;
+			xlnx,tri-default = <0xFFFFFFFF>;
+			xlnx,tri-default-2 = <0xFFFFFFFF>;
+		};
+		axi_gpio_1: gpio@41210000 {
+			#gpio-cells = <2>;
+			compatible = "xlnx,xps-gpio-1.00.a";
+			gpio-controller ;
+			reg = <0x41210000 0x10000>;
+			xlnx,all-inputs = <0x1>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,all-outputs = <0x0>;
+			xlnx,all-outputs-2 = <0x0>;
+			xlnx,dout-default = <0x00000000>;
+			xlnx,dout-default-2 = <0x00000000>;
+			xlnx,gpio-width = <0x1>;
+			xlnx,gpio2-width = <0x20>;
+			xlnx,interrupt-present = <0x0>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xFFFFFFFF>;
+			xlnx,tri-default-2 = <0xFFFFFFFF>;
+		};
+		axi_iic_0: i2c@41600000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clock-names = "ref_clk";
+			clocks = <&clkc 15>;
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&intc>;
+			interrupts = <0 30 4>;
+			reg = <0x41600000 0x10000>;
+		};
+		bluetooth_uart: serial@43c00000 {
+			clock-frequency = <0x2dc6c00>;
+			clock-names = "ref_clk";
+			clocks = <&clkc 0>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 4>;
+			port-number = <1>;
+			reg = <0x43c00000 0x10000>;
+			reg-offset = <0x1000>;
+			reg-shift = <2>;
+			xlnx,external-xin-clk-hz = <0x2dc6c00>;
+			xlnx,external-xin-clk-hz-d = <0x30>;
+			xlnx,has-external-rclk = <0x0>;
+			xlnx,has-external-xin = <0x1>;
+			xlnx,is-a-16550 = <0x1>;
+			xlnx,s-axi-aclk-freq-hz-d = "100.0";
+			xlnx,use-modem-ports = <0x1>;
+			xlnx,use-user-ports = <0x1>;
+		};
+	};
+
+	wlreg_on: wlreg-on {
+		compatible = "regulator-fixed";
+		regulator-name = "wlreg_on";
+		enable-active-high;
+		gpio = <&gpio0 56 0>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100>;
+	};
+};
+
+&gpio0 {
+	emio-gpio-width = <4>;
+	gpio-mask-high = <0x0>;
+	gpio-mask-low = <0x5600>;
+};
+
+&intc {
+	num_cpus = <1>;
+	num_interrupts = <96>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+	bus-width= <4>;
+	xlnx,has-cd = <0x0>;
+	xlnx,has-power = <0x0>;
+	xlnx,has-wp = <0x0>;
+	non-removeable;
+	broken-cd;
+	vmmc-supply = <&wlreg_on>;
+
+        brcmf: brcmf@1 {
+		status = "okay";
+                reg = <1>;
+                compatible = "brcm,bcm43430-fmac";
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <12000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+		broken-hpi;
+	};
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-reset = <&gpio0 7 0>;
+	usb-phy = <&usb_phy0>;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	interrupt-parent = <0x3>;
+	is-dual = <0x0>;
+	num-cs = <0x1>;
+
+
+	flash0: flash@0 {
+		compatible = "micron,m25p80";
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+
+		partition@0x00000000 {
+			label = "boot";
+			reg = <0x0 0xff0000>;
+		};
+		partition@0x00270000 {
+			label = "kernel";
+			reg = <0x270000 0xd80000>;
+		};
+		partition@0x00ff0000 {
+			label = "bootenv";
+			reg = <0xff0000 0x10000>;
+		};
+		
+		partition@0x01000000 {
+			label = "spare";
+			reg = <0x1000000 0x0>;
+		};
+
+	};
+};
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/reference-design/zybo-linux-bd.bb b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/reference-design/zybo-linux-bd.bb
new file mode 100644
index 0000000..be68918
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/reference-design/zybo-linux-bd.bb
@@ -0,0 +1,66 @@
+SUMMARY = "The reference design for zybo-linux-bd"
+DESCRIPTION = "Contains the Reference Design Files and hardware software \
+hand-off file. The HDF provides bitstream and Xilinx ps7_init_gpl.c/h \
+platform headers."
+SECTION = "bsp"
+
+DEPENDS += "unzip-native"
+
+LICENSE = "Proprietary"
+LIC_FILES_CHKSUM = "file://Projects/${HW_BD}/readme.txt;md5=e1cb7639bf00b6e730ff3a7f13714951"
+
+COMPATIBLE_MACHINE = "zybo-linux-bd-zynq7"
+
+HW_BD = "linux_bd"
+
+SRC_URI = "git://github.com/Digilent/ZYBO.git;protocol=https;nobranch=1"
+SRCREV = "63ca49fe027da49f3b0ac636bd404fd31fbbd945"
+
+PV = "+git${SRCPV}"
+
+S = "${WORKDIR}/git"
+
+HDF = "/Projects/${HW_BD}/hw_handoff/${HW_BD}_wrapper.hdf"
+
+S ?= "${WORKDIR}/${MACHINE}"
+
+PROVIDES = "virtual/bitstream virtual/xilinx-platform-init"
+
+FILES_${PN}-platform-init += "${PLATFORM_INIT_DIR}/*"
+
+FILES_${PN}-bitstream += " \
+		download.bit \
+		"
+
+PACKAGES = "${PN}-platform-init ${PN}-bitstream"
+
+BITSTREAM ?= "bitstream-${PV}-${PR}.bit"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+inherit xilinx-platform-init
+inherit deploy
+
+SYSROOT_DIRS += "${PLATFORM_INIT_DIR}"
+
+do_install() {
+	fn=$(unzip -l ${S}/${HDF} | awk '{print $NF}' | grep ".bit$")
+	unzip -o ${S}/${HDF} ${fn} -d ${D}
+	[ "${fn}" == "download.bit" ] || mv ${D}/${fn} ${D}/download.bit
+
+	install -d ${D}${PLATFORM_INIT_DIR}
+	for fn in ${PLATFORM_INIT_FILES}; do
+		unzip -o ${S}/${HDF} ${fn} -d ${D}${PLATFORM_INIT_DIR}
+	done
+}
+
+do_deploy () {
+	if [ -e ${D}/download.bit ]; then
+		install -d ${DEPLOYDIR}
+		install -m 0644 ${D}/download.bit ${DEPLOYDIR}/${BITSTREAM}
+		ln -sf ${BITSTREAM} ${DEPLOYDIR}/download.bit
+		# for u-boot 2016.3 with spl load bitstream patch
+		ln -sf ${BITSTREAM} ${DEPLOYDIR}/bitstream
+	fi
+}
+addtask deploy before do_build after do_install
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch
new file mode 100644
index 0000000..4b9d72b
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch
@@ -0,0 +1,217 @@
+From dfe572bcea9b74086d5bd9b963af26e64a043336 Mon Sep 17 00:00:00 2001
+From: Clement Laigle <clement.laigle8@gmail.com>
+Date: Sun, 10 Jun 2018 23:21:28 +0200
+Subject: [PATCH] zynq: Add initial support for Avnet MiniZed
+
+Initial support for Avnet MiniZed board.
+
+Signed-off-by: Clement Laigle <clement.laigle8@gmail.com>
+---
+ arch/arm/dts/Makefile          |   1 +
+ arch/arm/dts/zynq-minized.dts  | 106 +++++++++++++++++++++++++++++++++++++++++
+ configs/zynq_minized_defconfig |  68 ++++++++++++++++++++++++++
+ 3 files changed, 175 insertions(+)
+ create mode 100644 arch/arm/dts/zynq-minized.dts
+ create mode 100644 configs/zynq_minized_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index a895c70..32f9ae1 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
+ 	zynq-cse-qspi-single.dtb \
+ 	zynq-microzed.dtb \
+ 	zynq-picozed.dtb \
++	zynq-minized.dtb \
+ 	zynq-syzygy-hub.dtb \
+ 	zynq-topic-miami.dtb \
+ 	zynq-topic-miamilite.dtb \
+diff --git a/arch/arm/dts/zynq-minized.dts b/arch/arm/dts/zynq-minized.dts
+new file mode 100644
+index 0000000..3a05518
+--- /dev/null
++++ b/arch/arm/dts/zynq-minized.dts
+@@ -0,0 +1,106 @@
++// SPDX-License-Identifier: GPL-2.0+
++/*
++ * dts file for Avnet MiniZed board
++ *
++ * (C) Copyright 2017 - 2018, Xilinx, Inc.
++ *
++ * Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
++ */
++
++/dts-v1/;
++#include "zynq-7000.dtsi"
++
++/ {
++       model = "Avnet Zynq MiniZed Development Board";
++       compatible = "avnet,minized", "xlnx,zynq-7000";
++
++       aliases {
++               serial0 = &uart1;
++               serial1 = &uart0;
++               spi0 = &qspi;
++               mmc0 = &sdhci0;
++       };
++
++       memory@0 {
++               device_type = "memory";
++               reg = <0x0 0x20000000>;
++       };
++
++       chosen {
++               bootargs = "";
++               stdout-path = "serial0:115200n8";
++       };
++
++       usb_phy0: phy0 {
++               compatible = "usb-nop-xceiv";
++               #phy-cells = <0>;
++       };
++};
++
++&qspi {
++       status = "okay";
++       is-dual = <0>;
++       num-cs = <1>;
++       flash@0 {
++               compatible = "micron,m25p128";
++               reg = <0x0>;
++               spi-tx-bus-width = <4>;
++               spi-rx-bus-width = <4>;
++               spi-max-frequency = <50000000>;
++               partitions {
++                       compatible = "fixed-partitions";
++                       #address-cells = <1>;
++                       #size-cells = <1>;
++                       partition@0 {
++                               label = "boot";
++                               reg = <0x0 0xff0000>;
++                       };
++
++                       partition@270000 {
++                               label = "kernel";
++                               reg = <0x270000 0xd80000>;
++                       };
++
++                       partition@ff0000 {
++                               label = "bootenv";
++                               reg = <0xff0000 0x10000>;
++                       };
++
++                       partition@1000000 {
++                               label = "spare";
++                               reg = <0x1000000 0x0>;
++                       };
++               };
++       };
++};
++
++&uart0 {
++       status = "okay";
++};
++
++&uart1 {
++       u-boot,dm-pre-reloc;
++       status = "okay";
++};
++
++&usb0 {
++       status = "okay";
++       dr_mode = "host";
++       usb-phy = <&usb_phy0>;
++       usb-reset = <&gpio0 7 0>; /* USB_RST_N-MIO7 */
++};
++
++&sdhci1 {
++       status = "okay";
++       non-removable;
++       bus-width = <4>;
++       max-frequency = <12000000>;
++
++       #address-cells = <1>;
++       #size-cells = <0>;
++       mmccard: mmccard@0 {
++               compatible = "mmc-card";
++               reg = <0>;
++               broken-hpi;
++       };
++};
+diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig
+new file mode 100644
+index 0000000..44d65fc
+--- /dev/null
++++ b/configs/zynq_minized_defconfig
+@@ -0,0 +1,68 @@
++CONFIG_ARM=y
++CONFIG_ARCH_ZYNQ=y
++CONFIG_SYS_TEXT_BASE=0x4000000
++CONFIG_SPL=y
++CONFIG_SPL_STACK_R_ADDR=0x200000
++CONFIG_DEFAULT_DEVICE_TREE="zynq-minized"
++CONFIG_DEBUG_UART=y
++CONFIG_DISTRO_DEFAULTS=y
++# CONFIG_DISPLAY_CPUINFO is not set
++CONFIG_FIT=y
++CONFIG_FIT_SIGNATURE=y
++CONFIG_FIT_VERBOSE=y
++CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
++CONFIG_SPL_STACK_R=y
++CONFIG_SPL_OS_BOOT=y
++CONFIG_SYS_PROMPT="Zynq> "
++CONFIG_CMD_THOR_DOWNLOAD=y
++CONFIG_CMD_DFU=y
++# CONFIG_CMD_FLASH is not set
++CONFIG_CMD_FPGA_LOADBP=y
++CONFIG_CMD_FPGA_LOADFS=y
++CONFIG_CMD_FPGA_LOADMK=y
++CONFIG_CMD_FPGA_LOADP=y
++CONFIG_CMD_GPIO=y
++CONFIG_CMD_MMC=y
++CONFIG_CMD_SF=y
++CONFIG_CMD_USB=y
++# CONFIG_CMD_SETEXPR is not set
++CONFIG_CMD_TFTPPUT=y
++CONFIG_CMD_CACHE=y
++CONFIG_CMD_EXT4_WRITE=y
++CONFIG_ENV_IS_IN_SPI_FLASH=y
++CONFIG_NET_RANDOM_ETHADDR=y
++CONFIG_SPL_DM_SEQ_ALIAS=y
++CONFIG_DFU_MMC=y
++CONFIG_DFU_RAM=y
++CONFIG_FPGA_XILINX=y
++CONFIG_FPGA_ZYNQPL=y
++CONFIG_DM_GPIO=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_ZYNQ=y
++CONFIG_SPI_FLASH=y
++CONFIG_SPI_FLASH_BAR=y
++CONFIG_SPI_FLASH_SPANSION=y
++CONFIG_SPI_FLASH_STMICRO=y
++CONFIG_SPI_FLASH_WINBOND=y
++CONFIG_PHY_MARVELL=y
++CONFIG_PHY_REALTEK=y
++CONFIG_PHY_XILINX=y
++CONFIG_ZYNQ_GEM=y
++CONFIG_DEBUG_UART_ZYNQ=y
++CONFIG_DEBUG_UART_BASE=0xe0001000
++CONFIG_DEBUG_UART_CLOCK=50000000
++CONFIG_ZYNQ_SERIAL=y
++CONFIG_ZYNQ_QSPI=y
++CONFIG_USB=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_ULPI_VIEWPORT=y
++CONFIG_USB_ULPI=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_GADGET=y
++CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
++CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
++CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
++CONFIG_CI_UDC=y
++CONFIG_USB_GADGET_DOWNLOAD=y
++CONFIG_USB_FUNCTION_THOR=y
++CONFIG_OF_EMBED=y
+-- 
+2.7.4
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend
new file mode 100644
index 0000000..2fdbdb4
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-bsp/u-boot/u-boot_%.bbappend
@@ -0,0 +1,8 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+SRC_URI_append = " file://minized-u-boot.patch"
+
+HAS_PLATFORM_INIT_append = " \
+		zynq_minized_config \
+		"
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux-firmware/linux-firmware_%.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
new file mode 100644
index 0000000..7655caf
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@@ -0,0 +1,55 @@
+LICENSE_append_minized-zynq7 = "\
+    & Firmware-cypress \
+"
+
+LIC_FILES_CHKSUM_append_minized-zynq7 = "\
+    file://LICENCE.cypress;md5=cbc5f665d04f741f1e006d2096236ba7 \
+"
+NO_GENERIC_LICENSE[Firmware-cypress] = "LICENCE.cypress"
+
+SRC_URI_append_minized-zynq7 = " \
+       git://github.com/murata-wireless/cyw-fmac-nvram;protocol=git;branch=orga;destsuffix=cyw-fmac-nvram;name=cyw-fmac-nvram \
+       git://github.com/murata-wireless/cyw-bt-patch;protocol=git;branch=morty-orga;destsuffix=cyw-bt-patch;name=cyw-bt-patch \
+       git://github.com/murata-wireless/cyw-fmac-utils-imx32;protocol=git;branch=orga;destsuffix=cyw-fmac-utils-imx32;name=cyw-fmac-utils-imx32 \
+"
+
+SRCREV_cyw-fmac-nvram = "d12c2ac1b93941eaa03063bb7cb3c1ee1aa1b7d0"
+SRCREV_cyw-bt-patch = "9216e0d9f778009b5667d032886dfd49174c4b3a"
+SRCREV_cyw-fmac-utils-imx32 = "060688dfe76df98751207c8146268ce7fd80b6ab"
+SRCREV_FORMAT = "default+cyw-fmac-nvram+cyw-bt-patch+cyw-fmac-utils-imx32"
+
+do_install_append_minized-zynq7() {
+
+       install -d ${D}${bindir}
+
+       install -m 0644 ${WORKDIR}/cyw-fmac-nvram/brcmfmac43430-sdio.txt ${D}${nonarch_base_libdir}/firmware/brcm/
+       install -m 0644 ${WORKDIR}/cyw-bt-patch/CYW43430A1.1DX.hcd ${D}${nonarch_base_libdir}/firmware/brcm/
+       install -m 0644 ${WORKDIR}/cyw-fmac-utils-imx32/wl ${D}${bindir}
+}
+
+PACKAGES_prepend_minized-zynq7 = "\
+    ${PN}-cypress-license \
+    ${PN}-bcm43430a1-hcd \
+    ${PN}-mfgtest \
+"
+
+FILES_${PN}-mfgtest_minized-zynq7 = " \
+       ${bindir}/wl \
+"
+
+FILES_${PN}-bcm43430_append_minized-zynq7 = " \
+       ${nonarch_base_libdir}/firmware/brcm/ brcmfmac43430-sdio.txt \
+"
+
+# For additional Cypress
+FILES_${PN}-cypress-license = "\
+  ${nonarch_base_libdir}/firmware/LICENCE.cypress \
+"
+
+LICENSE_${PN}-bcm43430a1-hcd = "Firmware-cypress"
+
+FILES_${PN}-bcm43430a1-hcd = " \
+  ${nonarch_base_libdir}/firmware/brcm/BCM43430A1.1DX.hcd \
+"
+
+RDEPENDS_${PN}-bcm43430a1-hcd += "${PN}-cypress-license"
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch
new file mode 100644
index 0000000..b8ba70e
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch
@@ -0,0 +1,302 @@
+From c1bf9e8c50baa237b514715dcb9c8fd367694c93 Mon Sep 17 00:00:00 2001
+From: Jason Wu <jason.wu.misc@gmail.com>
+Date: Sun, 10 Apr 2016 13:14:13 +1000
+Subject: [PATCH 1/3] drm: xilinx: Add encoder for Digilent boards
+
+Add the dglnt_encoder driver that enables DRM support for the VGA and
+HDMI output ports found on many Digilent boards.
+
+Upstream-Status: Pending
+
+Signed-off-by: Sam Bobrowicz <sbobrowicz@digilentinc.com>
+Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
+---
+ .../bindings/drm/xilinx/dglnt_encoder.txt          |  23 +++
+ drivers/gpu/drm/xilinx/Kconfig                     |   6 +
+ drivers/gpu/drm/xilinx/Makefile                    |   1 +
+ drivers/gpu/drm/xilinx/dglnt_encoder.c             | 217 +++++++++++++++++++++
+ 4 files changed, 247 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt
+ create mode 100644 drivers/gpu/drm/xilinx/dglnt_encoder.c
+
+diff --git a/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt b/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt
+new file mode 100644
+index 0000000000..242b24e482
+--- /dev/null
++++ b/Documentation/devicetree/bindings/drm/xilinx/dglnt_encoder.txt
+@@ -0,0 +1,23 @@
++Device-Tree bindings for Digilent DRM Encoder Slave
++
++This driver provides support for VGA and HDMI outputs on Digilent FPGA boards.
++The VGA or HDMI port must be connected to a Xilinx display pipeline via an
++axi2vid IP core.
++
++Required properties:
++ - compatible: Should be "digilent,drm-encoder".
++
++Optional properties:
++ - dglnt,edid-i2c: The I2C device connected to the DDC bus on the video
++                   connector. This is used to obtain the supported resolutions
++                   of an attached monitor. If not defined, then a default
++                   set of resolutions is used and the display will initialize
++                   to 720p. Note most VGA connectors on Digilent boards do
++                   not have the DDC bus routed out.
++
++Example:
++
++	encoder_0: digilent_encoder {
++		compatible = "digilent,drm-encoder";
++		dglnt,edid-i2c = <&i2c1>;
++	};
+diff --git a/drivers/gpu/drm/xilinx/Kconfig b/drivers/gpu/drm/xilinx/Kconfig
+index 12b548c2a9..c3e2562e53 100644
+--- a/drivers/gpu/drm/xilinx/Kconfig
++++ b/drivers/gpu/drm/xilinx/Kconfig
+@@ -57,3 +57,9 @@ config DRM_XILINX_SDI
+ 	depends on DRM_XILINX
+ 	help
+ 	  DRM driver for Xilinx Display Port Subsystem.
++
++config DRM_DIGILENT_ENCODER
++   tristate "Digilent VGA/HDMI DRM Encoder Driver"
++   depends on DRM_XILINX
++   help
++     DRM slave encoder for Video-out on Digilent boards.
+diff --git a/drivers/gpu/drm/xilinx/Makefile b/drivers/gpu/drm/xilinx/Makefile
+index 19bc1541ca..c2717e40ea 100644
+--- a/drivers/gpu/drm/xilinx/Makefile
++++ b/drivers/gpu/drm/xilinx/Makefile
+@@ -7,6 +7,7 @@ xilinx_drm-y := xilinx_drm_crtc.o xilinx_drm_connector.o xilinx_drm_drv.o \
+ 		xilinx_drm_plane.o
+ xilinx_drm-y += xilinx_cresample.o xilinx_osd.o xilinx_rgb2yuv.o xilinx_vtc.o
+ 
++obj-$(CONFIG_DRM_DIGILENT_ENCODER) += dglnt_encoder.o
+ obj-$(CONFIG_DRM_XILINX) += xilinx_drm.o
+ obj-$(CONFIG_DRM_XILINX_DP) += xilinx_drm_dp.o
+ obj-$(CONFIG_DRM_XILINX_DP_SUB) += xilinx_drm_dp_sub.o
+diff --git a/drivers/gpu/drm/xilinx/dglnt_encoder.c b/drivers/gpu/drm/xilinx/dglnt_encoder.c
+new file mode 100644
+index 0000000000..26a23986f9
+--- /dev/null
++++ b/drivers/gpu/drm/xilinx/dglnt_encoder.c
+@@ -0,0 +1,217 @@
++/*
++ * dglnt_encoder.c - DRM slave encoder for Video-out on Digilent boards
++ *
++ * Copyright (C) 2015 Digilent
++ * Author: Sam Bobrowicz <sbobrowicz@digilentinc.com>
++ *
++ * Based on udl_encoder.c and udl_connector.c, Copyright (C) 2012 Red Hat.
++ * Also based on xilinx_drm_dp.c, Copyright (C) 2014 Xilinx, Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <drm/drmP.h>
++#include <drm/drm_edid.h>
++#include <drm/drm_encoder_slave.h>
++
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/i2c.h>
++#include <linux/of.h>
++#include <linux/of_platform.h>
++#include <linux/platform_device.h>
++
++#define DGLNT_ENC_MAX_FREQ 150000
++#define DGLNT_ENC_MAX_H 1920
++#define DGLNT_ENC_MAX_V 1080
++#define DGLNT_ENC_PREF_H 1280
++#define DGLNT_ENC_PREF_V 720
++
++struct dglnt_encoder {
++	struct drm_encoder *encoder;
++	struct i2c_adapter *i2c_bus;
++	bool i2c_present;
++};
++
++static inline struct dglnt_encoder *to_dglnt_encoder(
++					struct drm_encoder *encoder)
++{
++	return to_encoder_slave(encoder)->slave_priv;
++}
++
++static bool dglnt_mode_fixup(struct drm_encoder *encoder,
++				const struct drm_display_mode *mode,
++				struct drm_display_mode *adjusted_mode)
++{
++	return true;
++}
++
++static void dglnt_encoder_mode_set(struct drm_encoder *encoder,
++				struct drm_display_mode *mode,
++				struct drm_display_mode *adjusted_mode)
++{
++}
++
++static void
++dglnt_encoder_dpms(struct drm_encoder *encoder, int mode)
++{
++}
++
++static void dglnt_encoder_save(struct drm_encoder *encoder)
++{
++}
++
++static void dglnt_encoder_restore(struct drm_encoder *encoder)
++{
++}
++
++static int dglnt_encoder_mode_valid(struct drm_encoder *encoder,
++				struct drm_display_mode *mode)
++{
++	if (mode &&
++		!(mode->flags & ((DRM_MODE_FLAG_INTERLACE |
++			DRM_MODE_FLAG_DBLCLK) | DRM_MODE_FLAG_3D_MASK)) &&
++		(mode->clock <= DGLNT_ENC_MAX_FREQ) &&
++		(mode->hdisplay <= DGLNT_ENC_MAX_H) &&
++		(mode->vdisplay <= DGLNT_ENC_MAX_V))
++		return MODE_OK;
++	return MODE_BAD;
++}
++
++static int dglnt_encoder_get_modes(struct drm_encoder *encoder,
++				struct drm_connector *connector)
++{
++	struct dglnt_encoder *dglnt = to_dglnt_encoder(encoder);
++	struct edid *edid;
++	int num_modes = 0;
++
++	if (dglnt->i2c_present) {
++		edid = drm_get_edid(connector, dglnt->i2c_bus);
++		drm_mode_connector_update_edid_property(connector, edid);
++		if (edid) {
++			num_modes = drm_add_edid_modes(connector, edid);
++			kfree(edid);
++		}
++	} else {
++		num_modes = drm_add_modes_noedid(connector, DGLNT_ENC_MAX_H,
++						DGLNT_ENC_MAX_V);
++		drm_set_preferred_mode(connector, DGLNT_ENC_PREF_H,
++					DGLNT_ENC_PREF_V);
++	}
++	return num_modes;
++}
++
++static enum drm_connector_status dglnt_encoder_detect(
++					struct drm_encoder *encoder,
++					struct drm_connector *connector)
++{
++	struct dglnt_encoder *dglnt = to_dglnt_encoder(encoder);
++
++	if (dglnt->i2c_present) {
++		if (drm_probe_ddc(dglnt->i2c_bus))
++			return connector_status_connected;
++		return connector_status_disconnected;
++	} else
++		return connector_status_unknown;
++}
++
++static struct drm_encoder_slave_funcs dglnt_encoder_slave_funcs = {
++	.dpms			= dglnt_encoder_dpms,
++	.save			= dglnt_encoder_save,
++	.restore		= dglnt_encoder_restore,
++	.mode_fixup		= dglnt_mode_fixup,
++	.mode_valid		= dglnt_encoder_mode_valid,
++	.mode_set		= dglnt_encoder_mode_set,
++	.detect			= dglnt_encoder_detect,
++	.get_modes		= dglnt_encoder_get_modes,
++};
++
++static int dglnt_encoder_encoder_init(struct platform_device *pdev,
++				struct drm_device *dev,
++				struct drm_encoder_slave *encoder)
++{
++	struct dglnt_encoder *dglnt = platform_get_drvdata(pdev);
++	struct device_node *sub_node;
++
++	encoder->slave_priv = dglnt;
++	encoder->slave_funcs = &dglnt_encoder_slave_funcs;
++
++	dglnt->encoder = &encoder->base;
++
++	/* get i2c adapter for edid */
++	dglnt->i2c_present = false;
++	sub_node = of_parse_phandle(pdev->dev.of_node, "dglnt,edid-i2c", 0);
++	if (sub_node) {
++		dglnt->i2c_bus = of_find_i2c_adapter_by_node(sub_node);
++		if (!dglnt->i2c_bus)
++			DRM_INFO("failed to get the edid i2c adapter, using default modes\n");
++		else
++			dglnt->i2c_present = true;
++		of_node_put(sub_node);
++	}
++
++	return 0;
++}
++
++static int dglnt_encoder_probe(struct platform_device *pdev)
++{
++	struct dglnt_encoder *dglnt;
++
++	dglnt = devm_kzalloc(&pdev->dev, sizeof(*dglnt), GFP_KERNEL);
++	if (!dglnt)
++		return -ENOMEM;
++
++	platform_set_drvdata(pdev, dglnt);
++
++	return 0;
++}
++
++static int dglnt_encoder_remove(struct platform_device *pdev)
++{
++	return 0;
++}
++
++static const struct of_device_id dglnt_encoder_of_match[] = {
++	{ .compatible = "digilent,drm-encoder", },
++	{ /* end of table */ },
++};
++MODULE_DEVICE_TABLE(of, dglnt_encoder_of_match);
++
++static struct drm_platform_encoder_driver dglnt_encoder_driver = {
++	.platform_driver = {
++		.probe			= dglnt_encoder_probe,
++		.remove			= dglnt_encoder_remove,
++		.driver			= {
++			.owner		= THIS_MODULE,
++			.name		= "dglnt-drm-enc",
++			.of_match_table	= dglnt_encoder_of_match,
++		},
++	},
++
++	.encoder_init = dglnt_encoder_encoder_init,
++};
++
++static int __init dglnt_encoder_init(void)
++{
++	return platform_driver_register(&dglnt_encoder_driver.platform_driver);
++}
++
++static void __exit dglnt_encoder_exit(void)
++{
++	platform_driver_unregister(&dglnt_encoder_driver.platform_driver);
++}
++
++module_init(dglnt_encoder_init);
++module_exit(dglnt_encoder_exit);
++
++MODULE_AUTHOR("Digilent, Inc.");
++MODULE_DESCRIPTION("DRM slave encoder for Video-out on Digilent boards");
++MODULE_LICENSE("GPL v2");
+-- 
+2.14.2
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch
new file mode 100644
index 0000000..9b6229d
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch
@@ -0,0 +1,607 @@
+From 217e3b6f4393926b8dcad841381527ef3fc808c2 Mon Sep 17 00:00:00 2001
+From: Jason Wu <jason.wu.misc@gmail.com>
+Date: Sun, 10 Apr 2016 13:16:06 +1000
+Subject: [PATCH 2/3] clk: Add driver for axi_dynclk IP Core
+
+Add support for the axi_dynclk IP Core available from Digilent. This IP
+core dynamically configures the clock resources inside a Xilinx FPGA to
+generate a clock with a software programmable frequency.
+
+Upstream-Status: Pending
+
+Signed-off-by: Sam Bobrowicz <sbobrowicz@digilentinc.com>
+Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>
+---
+ drivers/clk/Kconfig            |   8 +
+ drivers/clk/Makefile           |   1 +
+ drivers/clk/clk-dglnt-dynclk.c | 547 +++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 556 insertions(+)
+ create mode 100644 drivers/clk/clk-dglnt-dynclk.c
+
+diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
+index dccb111100..7fe65a702b 100644
+--- a/drivers/clk/Kconfig
++++ b/drivers/clk/Kconfig
+@@ -148,6 +148,14 @@ config CLK_QORIQ
+ 	  This adds the clock driver support for Freescale QorIQ platforms
+ 	  using common clock framework.
+ 
++config COMMON_CLK_DGLNT_DYNCLK
++	tristate "Digilent axi_dynclk Driver"
++	depends on ARCH_ZYNQ || MICROBLAZE
++	help
++	---help---
++	  Support for the Digilent AXI Dynamic Clock core for Xilinx
++	  FPGAs.
++
+ config COMMON_CLK_XGENE
+ 	bool "Clock driver for APM XGene SoC"
+ 	default y
+diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
+index 0760449dde..45ce97d053 100644
+--- a/drivers/clk/Makefile
++++ b/drivers/clk/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE706)	+= clk-cdce706.o
+ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
+ obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
+ obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
++obj-$(CONFIG_COMMON_CLK_DGLNT_DYNCLK)	+= clk-dglnt-dynclk.o
+ obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
+ obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
+ obj-$(CONFIG_COMMON_CLK_MAX77686)	+= clk-max77686.o
+diff --git a/drivers/clk/clk-dglnt-dynclk.c b/drivers/clk/clk-dglnt-dynclk.c
+new file mode 100644
+index 0000000000..496ad5fc90
+--- /dev/null
++++ b/drivers/clk/clk-dglnt-dynclk.c
+@@ -0,0 +1,547 @@
++/*
++ * clk-dglnt-dynclk.c - Digilent AXI Dynamic Clock (axi_dynclk) Driver
++ *
++ * Copyright (C) 2015 Digilent
++ * Author: Sam Bobrowicz <sbobrowicz@digilentinc.com>
++ *
++ * Reused code from clk-axi-clkgen.c, Copyright (C) 2012-2013 Analog Devices Inc.
++ *
++ * This software is licensed under the terms of the GNU General Public
++ * License version 2, as published by the Free Software Foundation, and
++ * may be copied, distributed, and modified under those terms.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/platform_device.h>
++#include <linux/clk-provider.h>
++#include <linux/clk.h>
++#include <linux/slab.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/kernel.h>
++
++#define CLK_BIT_WEDGE 13
++#define CLK_BIT_NOCOUNT 12
++
++/* This value is used to signal an error */
++#define ERR_CLKCOUNTCALC 0xFFFFFFFF
++#define ERR_CLKDIVIDER (1 << CLK_BIT_WEDGE | 1 << CLK_BIT_NOCOUNT)
++
++#define DYNCLK_DIV_1_REGMASK 0x1041
++/* 25 MHz (125 KHz / 5) */
++#define DYNCLK_DEFAULT_FREQ 125000
++
++#define MMCM_FREQ_VCOMIN 600000
++#define MMCM_FREQ_VCOMAX 1200000
++#define MMCM_FREQ_PFDMIN 10000
++#define MMCM_FREQ_PFDMAX 450000
++#define MMCM_FREQ_OUTMIN 4000
++#define MMCM_FREQ_OUTMAX 800000
++#define MMCM_DIV_MAX 106
++#define MMCM_FB_MIN 2
++#define MMCM_FB_MAX 64
++#define MMCM_CLKDIV_MAX 128
++#define MMCM_CLKDIV_MIN 1
++
++#define OFST_DISPLAY_CTRL 0x0
++#define OFST_DISPLAY_STATUS 0x4
++#define OFST_DISPLAY_CLK_L 0x8
++#define OFST_DISPLAY_FB_L 0x0C
++#define OFST_DISPLAY_FB_H_CLK_H 0x10
++#define OFST_DISPLAY_DIV 0x14
++#define OFST_DISPLAY_LOCK_L 0x18
++#define OFST_DISPLAY_FLTR_LOCK_H 0x1C
++
++static const u64 lock_lookup[64] = {
++	0b0011000110111110100011111010010000000001,
++	0b0011000110111110100011111010010000000001,
++	0b0100001000111110100011111010010000000001,
++	0b0101101011111110100011111010010000000001,
++	0b0111001110111110100011111010010000000001,
++	0b1000110001111110100011111010010000000001,
++	0b1001110011111110100011111010010000000001,
++	0b1011010110111110100011111010010000000001,
++	0b1100111001111110100011111010010000000001,
++	0b1110011100111110100011111010010000000001,
++	0b1111111111111000010011111010010000000001,
++	0b1111111111110011100111111010010000000001,
++	0b1111111111101110111011111010010000000001,
++	0b1111111111101011110011111010010000000001,
++	0b1111111111101000101011111010010000000001,
++	0b1111111111100111000111111010010000000001,
++	0b1111111111100011111111111010010000000001,
++	0b1111111111100010011011111010010000000001,
++	0b1111111111100000110111111010010000000001,
++	0b1111111111011111010011111010010000000001,
++	0b1111111111011101101111111010010000000001,
++	0b1111111111011100001011111010010000000001,
++	0b1111111111011010100111111010010000000001,
++	0b1111111111011001000011111010010000000001,
++	0b1111111111011001000011111010010000000001,
++	0b1111111111010111011111111010010000000001,
++	0b1111111111010101111011111010010000000001,
++	0b1111111111010101111011111010010000000001,
++	0b1111111111010100010111111010010000000001,
++	0b1111111111010100010111111010010000000001,
++	0b1111111111010010110011111010010000000001,
++	0b1111111111010010110011111010010000000001,
++	0b1111111111010010110011111010010000000001,
++	0b1111111111010001001111111010010000000001,
++	0b1111111111010001001111111010010000000001,
++	0b1111111111010001001111111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001,
++	0b1111111111001111101011111010010000000001
++};
++
++static const u32 filter_lookup_low[64] = {
++	0b0001011111,
++	0b0001010111,
++	0b0001111011,
++	0b0001011011,
++	0b0001101011,
++	0b0001110011,
++	0b0001110011,
++	0b0001110011,
++	0b0001110011,
++	0b0001001011,
++	0b0001001011,
++	0b0001001011,
++	0b0010110011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001010011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0001100011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010010011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011,
++	0b0010100011
++};
++
++struct dglnt_dynclk_reg;
++struct dglnt_dynclk_mode;
++struct dglnt_dynclk;
++
++struct dglnt_dynclk_reg {
++	u32 clk0L;
++	u32 clkFBL;
++	u32 clkFBH_clk0H;
++	u32 divclk;
++	u32 lockL;
++	u32 fltr_lockH;
++};
++
++struct dglnt_dynclk_mode {
++	u32 freq;
++	u32 fbmult;
++	u32 clkdiv;
++	u32 maindiv;
++};
++
++struct dglnt_dynclk {
++	void __iomem *base;
++	struct clk_hw clk_hw;
++	unsigned long freq;
++};
++
++u32 dglnt_dynclk_divider(u32 divide)
++{
++	u32 output = 0;
++	u32 highTime = 0;
++	u32 lowTime = 0;
++
++	if ((divide < 1) || (divide > 128))
++		return ERR_CLKDIVIDER;
++
++	if (divide == 1)
++		return DYNCLK_DIV_1_REGMASK;
++
++	highTime = divide / 2;
++	/* if divide is odd */
++	if (divide & 0x1) {
++		lowTime = highTime + 1;
++		output = 1 << CLK_BIT_WEDGE;
++	} else {
++		lowTime = highTime;
++	}
++
++	output |= 0x03F & lowTime;
++	output |= 0xFC0 & (highTime << 6);
++	return output;
++}
++
++u32 dglnt_dynclk_count_calc(u32 divide)
++{
++	u32 output = 0;
++	u32 divCalc = 0;
++
++	divCalc = dglnt_dynclk_divider(divide);
++	if (divCalc == ERR_CLKDIVIDER)
++		output = ERR_CLKCOUNTCALC;
++	else
++		output = (0xFFF & divCalc) | ((divCalc << 10) & 0x00C00000);
++	return output;
++}
++
++
++int dglnt_dynclk_find_reg(struct dglnt_dynclk_reg *regValues,
++			  struct dglnt_dynclk_mode *clkParams)
++{
++	if ((clkParams->fbmult < 2) || clkParams->fbmult > 64)
++		return -EINVAL;
++
++	regValues->clk0L = dglnt_dynclk_count_calc(clkParams->clkdiv);
++	if (regValues->clk0L == ERR_CLKCOUNTCALC)
++		return -EINVAL;
++
++	regValues->clkFBL = dglnt_dynclk_count_calc(clkParams->fbmult);
++	if (regValues->clkFBL == ERR_CLKCOUNTCALC)
++		return -EINVAL;
++
++	regValues->clkFBH_clk0H = 0;
++
++	regValues->divclk = dglnt_dynclk_divider(clkParams->maindiv);
++	if (regValues->divclk == ERR_CLKDIVIDER)
++		return -EINVAL;
++
++	regValues->lockL = (u32)(lock_lookup[clkParams->fbmult - 1] &
++				 0xFFFFFFFF);
++
++	regValues->fltr_lockH = (u32)((lock_lookup[clkParams->fbmult - 1] >>
++				       32) & 0x000000FF);
++	regValues->fltr_lockH |= ((filter_lookup_low[clkParams->fbmult - 1] <<
++				   16) & 0x03FF0000);
++
++	return 0;
++}
++
++void dglnt_dynclk_write_reg(struct dglnt_dynclk_reg *regValues,
++			    void __iomem *baseaddr)
++{
++	writel(regValues->clk0L, baseaddr + OFST_DISPLAY_CLK_L);
++	writel(regValues->clkFBL, baseaddr + OFST_DISPLAY_FB_L);
++	writel(regValues->clkFBH_clk0H, baseaddr + OFST_DISPLAY_FB_H_CLK_H);
++	writel(regValues->divclk, baseaddr + OFST_DISPLAY_DIV);
++	writel(regValues->lockL, baseaddr + OFST_DISPLAY_LOCK_L);
++	writel(regValues->fltr_lockH, baseaddr + OFST_DISPLAY_FLTR_LOCK_H);
++}
++
++u32 dglnt_dynclk_find_mode(u32 freq, u32 parentFreq,
++			   struct dglnt_dynclk_mode *bestPick)
++{
++	u32 bestError = MMCM_FREQ_OUTMAX;
++	u32 curError;
++	u32 curClkMult;
++	u32 curFreq;
++	u32 divVal;
++	u32 curFb, curClkDiv;
++	u32 minFb = 0;
++	u32 maxFb = 0;
++	u32 curDiv = 1;
++	u32 maxDiv;
++	bool freq_found = false;
++
++	bestPick->freq = 0;
++	if (parentFreq == 0)
++		return 0;
++
++	/* minimum frequency is actually dictated by VCOmin */
++	if (freq < MMCM_FREQ_OUTMIN)
++		freq = MMCM_FREQ_OUTMIN;
++	if (freq > MMCM_FREQ_OUTMAX)
++		freq = MMCM_FREQ_OUTMAX;
++
++	if (parentFreq > MMCM_FREQ_PFDMAX)
++		curDiv = 2;
++	maxDiv = parentFreq / MMCM_FREQ_PFDMIN;
++	if (maxDiv > MMCM_DIV_MAX)
++		maxDiv = MMCM_DIV_MAX;
++
++	while (curDiv <= maxDiv && !freq_found) {
++		minFb = curDiv * DIV_ROUND_UP(MMCM_FREQ_VCOMIN, parentFreq);
++		maxFb = curDiv * (MMCM_FREQ_VCOMAX / parentFreq);
++		if (maxFb > MMCM_FB_MAX)
++			maxFb = MMCM_FB_MAX;
++		if (minFb < MMCM_FB_MIN)
++			minFb = MMCM_FB_MIN;
++
++		divVal = curDiv * freq;
++		/*
++		 * This multiplier is used to find the best clkDiv value for
++		 * each FB value
++		 */
++		curClkMult = ((parentFreq * 1000) + (divVal / 2)) / divVal;
++
++		curFb = minFb;
++		while (curFb <= maxFb && !freq_found) {
++			curClkDiv = ((curClkMult * curFb) + 500) / 1000;
++			if (curClkDiv > MMCM_CLKDIV_MAX)
++				curClkDiv = MMCM_CLKDIV_MAX;
++			if (curClkDiv < MMCM_CLKDIV_MIN)
++				curClkDiv = MMCM_CLKDIV_MIN;
++			curFreq = (((parentFreq * curFb) / curDiv) / curClkDiv);
++			if (curFreq >= freq)
++				curError = curFreq - freq;
++			else
++				curError = freq - curFreq;
++			if (curError < bestError) {
++				bestError = curError;
++				bestPick->clkdiv = curClkDiv;
++				bestPick->fbmult = curFb;
++				bestPick->maindiv = curDiv;
++				bestPick->freq = curFreq;
++			}
++			if (!curError)
++				freq_found = true;
++			curFb++;
++		}
++		curDiv++;
++	}
++	return bestPick->freq;
++}
++
++static struct dglnt_dynclk *clk_hw_to_dglnt_dynclk(struct clk_hw *clk_hw)
++{
++	return container_of(clk_hw, struct dglnt_dynclk, clk_hw);
++}
++
++
++static int dglnt_dynclk_enable(struct clk_hw *clk_hw)
++{
++	struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
++	unsigned int clock_state;
++
++	if (dglnt_dynclk->freq) {
++		writel(1, dglnt_dynclk->base + OFST_DISPLAY_CTRL);
++		do {
++			clock_state = readl(dglnt_dynclk->base +
++					    OFST_DISPLAY_STATUS);
++		} while (!clock_state);
++	}
++	return 0;
++}
++
++static void dglnt_dynclk_disable(struct clk_hw *clk_hw)
++{
++	struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
++
++	writel(0, dglnt_dynclk->base + OFST_DISPLAY_CTRL);
++}
++
++static int dglnt_dynclk_set_rate(struct clk_hw *clk_hw,
++	unsigned long rate, unsigned long parent_rate)
++{
++	struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
++	struct dglnt_dynclk_reg clkReg;
++	struct dglnt_dynclk_mode clkMode;
++
++	if (parent_rate == 0 || rate == 0)
++		return -EINVAL;
++	if (rate == dglnt_dynclk->freq)
++		return 0;
++
++	/*
++	 * Convert from Hz to KHz, then multiply by five to account for
++	 * BUFR division
++	 */
++	rate = (rate + 100) / 200;
++	/* convert from Hz to KHz */
++	parent_rate = (parent_rate + 500) / 1000;
++	if (!dglnt_dynclk_find_mode(rate, parent_rate, &clkMode))
++		return -EINVAL;
++
++	/*
++	 * Write to the PLL dynamic configuration registers to configure it
++	 * with the calculated parameters.
++	 */
++	dglnt_dynclk_find_reg(&clkReg, &clkMode);
++	dglnt_dynclk_write_reg(&clkReg, dglnt_dynclk->base);
++	dglnt_dynclk->freq = clkMode.freq * 200;
++	dglnt_dynclk_disable(clk_hw);
++	dglnt_dynclk_enable(clk_hw);
++
++	return 0;
++}
++
++static long dglnt_dynclk_round_rate(struct clk_hw *hw, unsigned long rate,
++	unsigned long *parent_rate)
++{
++	struct dglnt_dynclk_mode clkMode;
++
++	dglnt_dynclk_find_mode(((rate + 100) / 200),
++		((*parent_rate) + 500) / 1000, &clkMode);
++
++	return (clkMode.freq * 200);
++}
++
++static unsigned long dglnt_dynclk_recalc_rate(struct clk_hw *clk_hw,
++	unsigned long parent_rate)
++{
++	struct dglnt_dynclk *dglnt_dynclk = clk_hw_to_dglnt_dynclk(clk_hw);
++
++	return dglnt_dynclk->freq;
++}
++
++
++static const struct clk_ops dglnt_dynclk_ops = {
++	.recalc_rate = dglnt_dynclk_recalc_rate,
++	.round_rate = dglnt_dynclk_round_rate,
++	.set_rate = dglnt_dynclk_set_rate,
++	.enable = dglnt_dynclk_enable,
++	.disable = dglnt_dynclk_disable,
++};
++
++static const struct of_device_id dglnt_dynclk_ids[] = {
++	{ .compatible = "digilent,axi-dynclk", },
++	{ },
++};
++MODULE_DEVICE_TABLE(of, dglnt_dynclk_ids);
++
++static int dglnt_dynclk_probe(struct platform_device *pdev)
++{
++	const struct of_device_id *id;
++	struct dglnt_dynclk *dglnt_dynclk;
++	struct clk_init_data init;
++	const char *parent_name;
++	const char *clk_name;
++	struct resource *mem;
++	struct clk *clk;
++
++	if (!pdev->dev.of_node)
++		return -ENODEV;
++
++	id = of_match_node(dglnt_dynclk_ids, pdev->dev.of_node);
++	if (!id)
++		return -ENODEV;
++
++	dglnt_dynclk = devm_kzalloc(&pdev->dev, sizeof(*dglnt_dynclk),
++				    GFP_KERNEL);
++	if (!dglnt_dynclk)
++		return -ENOMEM;
++
++	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++	dglnt_dynclk->base = devm_ioremap_resource(&pdev->dev, mem);
++	if (IS_ERR(dglnt_dynclk->base))
++		return PTR_ERR(dglnt_dynclk->base);
++
++	parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
++	if (!parent_name)
++		return -EINVAL;
++
++	clk_name = pdev->dev.of_node->name;
++	of_property_read_string(pdev->dev.of_node, "clock-output-names",
++		&clk_name);
++
++	init.name = clk_name;
++	init.ops = &dglnt_dynclk_ops;
++	init.flags = 0;
++	init.parent_names = &parent_name;
++	init.num_parents = 1;
++
++	dglnt_dynclk->freq = 0;
++	dglnt_dynclk_disable(&dglnt_dynclk->clk_hw);
++
++	dglnt_dynclk->clk_hw.init = &init;
++	clk = devm_clk_register(&pdev->dev, &dglnt_dynclk->clk_hw);
++	if (IS_ERR(clk))
++		return PTR_ERR(clk);
++
++	return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
++				   clk);
++}
++
++static int dglnt_dynclk_remove(struct platform_device *pdev)
++{
++	of_clk_del_provider(pdev->dev.of_node);
++
++	return 0;
++}
++
++static struct platform_driver dglnt_dynclk_driver = {
++	.driver = {
++		.name = "dglnt-dynclk",
++		.owner = THIS_MODULE,
++		.of_match_table = dglnt_dynclk_ids,
++	},
++	.probe = dglnt_dynclk_probe,
++	.remove = dglnt_dynclk_remove,
++};
++module_platform_driver(dglnt_dynclk_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Sam Bobrowicz <sbobrowicz@digilentinc.com>");
++MODULE_DESCRIPTION("CCF Driver for Digilent axi_dynclk IP Core");
+-- 
+2.14.2
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch
new file mode 100644
index 0000000..a98d84c
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0003-drm-xilinx-Fix-DPMS-transition-to-on.patch
@@ -0,0 +1,54 @@
+From 1a18e2b514ae9e75145597ac509a87f656c976ba Mon Sep 17 00:00:00 2001
+From: Nathan Rossi <nathan@nathanrossi.com>
+Date: Mon, 2 May 2016 23:46:42 +1000
+Subject: [PATCH 3/3] drm: xilinx: Fix DPMS transition to on
+
+Fix the issues where the VTC is reset (losing its timing config).
+
+Also fix the issue where the plane destroys its DMA descriptors and
+marks the DMA channels as inactive but never recreates the descriptors
+and never updates the active state when turning DPMS back on.
+
+Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
+Upstream-Status: Pending [This is a workaround]
+---
+ drivers/gpu/drm/xilinx/xilinx_drm_crtc.c  | 1 -
+ drivers/gpu/drm/xilinx/xilinx_drm_plane.c | 3 ++-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c b/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
+index 631d35b921..93dbd4b58a 100644
+--- a/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
++++ b/drivers/gpu/drm/xilinx/xilinx_drm_crtc.c
+@@ -88,7 +88,6 @@ static void xilinx_drm_crtc_dpms(struct drm_crtc *base_crtc, int dpms)
+ 	default:
+ 		if (crtc->vtc) {
+ 			xilinx_vtc_disable(crtc->vtc);
+-			xilinx_vtc_reset(crtc->vtc);
+ 		}
+ 		if (crtc->cresample) {
+ 			xilinx_cresample_disable(crtc->cresample);
+diff --git a/drivers/gpu/drm/xilinx/xilinx_drm_plane.c b/drivers/gpu/drm/xilinx/xilinx_drm_plane.c
+index 6a248b72d4..d2518a4bdf 100644
+--- a/drivers/gpu/drm/xilinx/xilinx_drm_plane.c
++++ b/drivers/gpu/drm/xilinx/xilinx_drm_plane.c
+@@ -140,7 +140,7 @@ void xilinx_drm_plane_commit(struct drm_plane *base_plane)
+ 	for (i = 0; i < MAX_NUM_SUB_PLANES; i++) {
+ 		struct xilinx_drm_plane_dma *dma = &plane->dma[i];
+ 
+-		if (dma->chan && dma->is_active) {
++		if (dma->chan) {
+ 			flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ 			desc = dmaengine_prep_interleaved_dma(dma->chan,
+ 							      &dma->xt,
+@@ -153,6 +153,7 @@ void xilinx_drm_plane_commit(struct drm_plane *base_plane)
+ 			dmaengine_submit(desc);
+ 
+ 			dma_async_issue_pending(dma->chan);
++			dma->is_active = true;
+ 		}
+ 	}
+ }
+-- 
+2.14.2
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0004-minized-wifi-bluetooth.cfg b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0004-minized-wifi-bluetooth.cfg
new file mode 100644
index 0000000..f71e53a
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx/v2018.1/0004-minized-wifi-bluetooth.cfg
@@ -0,0 +1,33 @@
+#
+# Bluetooth config
+#
+CONFIG_BT=y
+CONFIG_BT_BREDR=y
+CONFIG_BT_HS=y
+CONFIG_BT_LE=y
+CONFIG_BT_BCM=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HIDP=y
+CONFIG_CFG80211=y
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_CRDA_SUPPORT=y
+CONFIG_BRCMUTIL=y
+CONFIG_BRCMFMAC=y
+CONFIG_BRCMFMAC_PROTO_BCDC=y
+CONFIG_BRCMFMAC_SDIO=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_SHA256=y
+
+#
+# Regulator config
+#
+CONFIG_REGMAP_IRQ=y
+CONFIG_I2C_XILINX=y
+CONFIG_MFD_DA9062=y
+CONFIG_REGULATOR_DA9062=y
+
diff --git a/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2018.1.bbappend b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2018.1.bbappend
new file mode 100644
index 0000000..535fbb2
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-contrib/recipes-kernel/linux/linux-xlnx_2018.1.bbappend
@@ -0,0 +1,9 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/linux-xlnx:"
+
+SRC_URI_append_zybo-linux-bd-zynq7 = " \
+	file://0001-drm-xilinx-Add-encoder-for-Digilent-boards.patch \
+	file://0002-clk-Add-driver-for-axi_dynclk-IP-Core.patch \
+	file://0003-drm-xilinx-Fix-DPMS-transition-to-on.patch \
+	"
+
+SRC_URI_append_minized-zynq7 = " file://0004-minized-wifi-bluetooth.cfg"