Yocto 2.5
Move OpenBMC to Yocto 2.5(sumo)
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
Change-Id: I5c5ad6904a16e14c1c397f0baf10c9d465594a78
diff --git a/import-layers/yocto-poky/meta-yocto-bsp/README.hardware b/import-layers/yocto-poky/meta-yocto-bsp/README.hardware
index 84c5afa..d8d2a0c 100644
--- a/import-layers/yocto-poky/meta-yocto-bsp/README.hardware
+++ b/import-layers/yocto-poky/meta-yocto-bsp/README.hardware
@@ -27,7 +27,7 @@
The following boards are supported by the meta-yocto-bsp layer:
- * Texas Instruments Beaglebone (beaglebone)
+ * Texas Instruments Beaglebone (beaglebone-yocto)
* Freescale MPC8315E-RDB (mpc8315e-rdb)
* Ubiquiti Networks EdgeRouter Lite (edgerouter)
* General IA platforms (genericx86 and genericx86-64)
@@ -120,7 +120,7 @@
dd command to write the image to a USB stick.
-Texas Instruments Beaglebone (beaglebone)
+Texas Instruments Beaglebone (beaglebone-yocto)
=========================================
The Beaglebone is an ARM Cortex-A8 development board with USB, Ethernet, 2D/3D
@@ -151,7 +151,7 @@
2. Use the "dd" utility to write the image to the SD card. For example:
- # dd core-image-minimal-beaglebone.wic of=/dev/sdb
+ # dd core-image-minimal-beaglebone-yocto.wic of=/dev/sdb
3. Insert the SD card into the Beaglebone and boot the board.