diff --git a/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh b/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh
index a5ec8e7..ac472f9 100644
--- a/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh
+++ b/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-platform-init/ampere_platform_init.sh
@@ -4,6 +4,48 @@
 # shellcheck source=meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-platform-init/mtmitchell_platform_gpios_init.sh
 source /usr/sbin/platform_gpios_init.sh
 
+function mtc_board_revision_detection() {
+    # Support to detect MTC board revisions via board ID and to set GPI pins for the host
+    # to identify the board revision.
+
+    # Check the mainboard by board_id (i2c0, address 0x20)
+    board_id=$(i2cget -y -a 0 0x20 0x0 b)
+    if [ "$?" == '1' ]; then
+        echo "Failed to read board_id from i2c"
+    fi
+
+    # BIT[7:6:5:4]
+    # 0000 : EVT1
+    # 0001 : EVT2
+    # 0010 : EVT3
+    # 0011 :
+    # 0100 : DVT1
+    # 0101 : DVT2
+    # 0110 : DVT3
+    # 0111 :
+    # 1000 : PVT1
+    # 1001 : PVT2
+    # 1010 : PVT3
+    # 1011 :
+
+    md_id_7_6_5_4=$(( (board_id & 0xF0)>>4 ))
+
+    # P0[7] -> GPI[1] and P0[6] -> GPI[0]
+    # P[7:6] = 2'b01 for Mitchell 2.0 (PVT2)
+    # P[7:6] = 2'b00 for Mitchell 1.0 (EVTx, DVTx, PVT1 )
+    if [[ $md_id_7_6_5_4 -gt 8 ]]; then
+        # Board is MTC2.0
+        echo "Update GPI1 to low and GPI0 to high"
+        gpioset $(gpiofind gpi1)=0
+        gpioset $(gpiofind gpi0)=1
+    else
+        # Board is MTC1.0
+        echo "Update GPI1 to low and GPI0 to low"
+        gpioset $(gpiofind gpi1)=0
+        gpioset $(gpiofind gpi0)=0
+    fi
+}
+
 #pre platform init function. implemented in platform_gpios_init.sh
 pre-platform-init
 
@@ -40,6 +82,8 @@
     gpioget $(gpiofind "$gpioName")
 done
 
+mtc_board_revision_detection
+
 #post platform init function. implemented in platform_gpios_init.sh
 post-platform-init