tree 771a5fa94bc90bd3566607496b9dca203ce053ca
parent 905ef1dba3f7df79d35df0071f264f384eaedfc8
author Thang Q. Nguyen <thang@os.amperecomputing.com> 1627296519 +0000
committer Thang Q. Nguyen <thang@os.amperecomputing.com> 1627353853 +0000

meta-ampere: mtjade: enable IPMI on eth1

NCSI was enabled in Mt.Jade device tree. This makes the RGMII port is
now eth1. However, just eth0 is enabled for IPMI OOB so running IPMI
OOB command is fail with RGMII's IP address.
This commit sets eth1 as default Ethernet port for IPMI OOB command and
set eth0 as alternative IPMI OOB port.

Tested:
1. Run IPMI commands from client with RGMII's IP address
$ ipmitool -U root -P 0penBmc -C 17 -I lanplus -H 10.38.64.72 power status
Chassis Power is on

Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Change-Id: Iba65221b8cab99486d1f35026e0cf593cce4a8c9