diff --git a/poky/documentation/toaster-manual/toaster-manual-start.xml b/poky/documentation/toaster-manual/toaster-manual-start.xml
new file mode 100644
index 0000000..8a85700
--- /dev/null
+++ b/poky/documentation/toaster-manual/toaster-manual-start.xml
@@ -0,0 +1,116 @@
+<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"
+[<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] >
+<!--SPDX-License-Identifier: CC-BY-2.0-UK-->
+
+<chapter id='toaster-manual-start'>
+
+<title>Preparing to Use Toaster</title>
+
+    <para>
+        This chapter describes how you need to prepare your system in order to
+        use Toaster.
+    </para>
+
+    <section id='toaster-setting-up-the-basic-system-requirements'>
+        <title>Setting Up the Basic System Requirements</title>
+
+        <para>
+            Before you can use Toaster, you need to first set up your
+            build system to run the Yocto Project.
+            To do this, follow the instructions in the
+            "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-preparing-the-build-host'>Preparing the Build Host</ulink>"
+            section of the Yocto Project Development Tasks
+            Manual.
+ 	    For Ubuntu/Debian, you might also need to do an additional install
+            of pip3.
+                <literallayout class='monospaced'>
+     $ sudo apt-get install python3-pip
+                </literallayout>
+        </para>
+    </section>
+
+    <section id='toaster-establishing-toaster-system-dependencies'>
+        <title>Establishing Toaster System Dependencies</title>
+
+        <para>
+            Toaster requires extra Python dependencies in order to run.
+            A Toaster requirements file named
+            <filename>toaster-requirements.txt</filename> defines the
+            Python dependencies.
+            The requirements file is located in the
+            <filename>bitbake</filename> directory, which is located in the
+            root directory of the
+            <ulink url='&YOCTO_DOCS_REF_URL;#source-directory'>Source Directory</ulink>
+            (e.g. <filename>poky/bitbake/toaster-requirements.txt</filename>).
+            The dependencies appear in a <filename>pip</filename>,
+            install-compatible format.
+        </para>
+
+        <section id='toaster-load-packages'>
+            <title>Install Toaster Packages</title>
+
+            <para>
+                You need to install the packages that Toaster requires.
+                Use this command:
+                <literallayout class='monospaced'>
+     $ pip3 install --user -r bitbake/toaster-requirements.txt
+                </literallayout>
+                The previous command installs the necessary Toaster modules
+                into a local python 3 cache in your
+                <filename>$HOME</filename> directory.
+                The caches is actually located in
+                <filename>$HOME/.local</filename>.
+                To see what packages have been installed into your
+                <filename>$HOME</filename> directory, do the following:
+                <literallayout class='monospaced'>
+     $ pip3 list installed --local
+                </literallayout>
+                If you need to remove something, the following works:
+                <literallayout class='monospaced'>
+     $ pip3 uninstall PackageNameToUninstall
+                </literallayout>
+            </para>
+        </section>
+
+<!-- Commenting this section out for now in case it needs to be used again.
+
+        <section id='toaster-install-daemon'>
+            <title>Install <filename>daemon</filename></title>
+
+            <para>
+                Toaster depends on
+                <ulink url='http://www.libslack.org/daemon/'><filename>daemon</filename></ulink>.
+                Depending on your distribution, how you install
+                <filename>daemon</filename> differs:
+                <itemizedlist>
+                    <listitem><para><emphasis>Debian-Based Systems:</emphasis>
+                        If you are running a Debian-based distribution,
+                        install <filename>daemon</filename> using the
+                        following command:
+                        <literallayout class='monospaced'>
+     $ sudo apt-get install daemon​
+                        </literallayout>
+                        </para></listitem>
+                    <listitem><para><emphasis>Non-Debian-Based Systems:</emphasis>
+                        If you are not running a Debian-based distribution
+                        (Redhat-based distribution such as Fedora),
+                        you need to download ​the file relevant to the
+                        architecture and then install
+                        <filename>daemon</filename> manually.
+                        Following are the commands for 64-bit distributions:
+                        <literallayout class='monospaced'>
+     $ wget http://libslack.org/daemon/download/daemon-0.6.4-1.x86_64.rpm
+     $ sudo rpm -i daemon-0.6.4-1.x86_64.rpm
+                        </literallayout>
+                        Here are the commands for a 32-bit distribution:
+                        <literallayout class='monospaced'>
+     $ wget http://libslack.org/daemon/download/daemon-0.6.4-1.i686.rpm
+     $ sudo rpm -i ​daemon-0.6.4-1.i686.rpm​
+                        </literallayout>
+                        </para></listitem>
+                </itemizedlist>
+            </para>
+        </section> -->
+    </section>
+</chapter>