subtree updates openembedded poky
meta-openembedded: 491b7592f4..eff1b182c1:
Alejandro Hernandez Samaniego (1):
emacs: update to 29.1
Archana Polampalli (2):
python3-pyroute2: fix ptest failure
nodejs: upgrade 18.17.0 -> 18.17.1
Bartosz Golaszewski (1):
libgpiod: update to v2.0.2
Beniamin Sandu (3):
unbound: upgrade 1.17.1 -> 1.18.0
mbedtls: upgrade 3.4.0 -> 3.4.1
mbedtls: upgrade 2.28.3 -> 2.28.4
Benjamin Bara (3):
libvpx: fix VPXTARGET for non-neon armv7a
ne10: set incompatible for armv7 without neon
openh264: make neon optional and disable if not supported
Chaitanya Vadrevu (1):
bolt: Add recipe
Chen Qi (2):
spice-protocol: fix populate_sdk error when spice is installed
python3-blivetgui: switch from master to main
Christophe Vu-Brugier (1):
sg3-utils: upgrade 1.47 -> 1.48
Danik (2):
python3-gspread: interface for google spreadsheet
python3-piccata: piccata - a simple CoAP toolkit added
Denys Zagorui (1):
bpftool: add native and nativesdk support
Emil Kronborg Andersen (3):
lcms: add CVE_PRODUCT
snappy: add CVE_PRODUCT
libopus: add CVE_PRODUCT
Enrico Jorns (1):
microcom: add new recipe
Ewa Kujawska (1):
python3-oauth2client_4.1.2.bb: recipe added
Frieder Schrempf (1):
python3-can: Add missing runtime dependencies
Gianfranco Costamagna (1):
dlt-daemon: upgrade 2.18.9 -> 2.18.10 (commit: 0f2d4cfffada6f8448a2cb27995b38eb4271044f)
Joe Slater (1):
python3-inotify: fix tests
Justin Bronder (5):
python3-mypy-extensions: upgrade 0.4.3 -> 1.0.0
python3-types-setuptools: add 68.0.0.3
python3-typed-ast: remove EOL package
python3-types-psutil: add 5.9.5.16
python3-mypy: upgrade 0.971 -> 1.5.0
Kai Kang (1):
libmcrypt: fix multilib conflict
Khem Raj (31):
qad: Fix build with clang
python3-dominate: Fix get_thread_context ptest on musl
perfetto: Add SRCREV_FORMAT
gosu: Define SRCREV_FORMAT
libsdl2-ttf: Define SRCREV_FORMAT
gosu: Define SRCREV_FORMAT
sysdig: Add SRCREV_FORMAT
cockpit: Upgrade to 298 release
librelp: Fix function prototypes in tests
jemalloc: Unbolt clang workaroud
python3-protobuf: Fix build errors seen with clang
mariadb: Fix build with libfmt 10.1+
librelp: Add packageconfigs for TLS implementations
librelp: Fix ptests builds on musl
librelp: Fix ptest installs to work with dash
librelp: Add to meta-oe ptest image
liburing: Upgrade to 2.4 release
rsyslog: Enable openssl transport by default
libio-socket-ssl-perl: Upgrade to 2.083
libfaketime: Fix build with clang
libfaketime: Eanable LFS64 on musl
python3-lz4: Drop using PYTHON_PN
python3-lz4: Add missing rdeps needed for ptests
rsyslog: Skip failing omfile-outchannel test on musl
python3-m2crypto: Append architecture to SWIG_FEATURES instead of overriding
networkmanager: Fix build on musl
network-manager-applet: Fix build with musl/lld linker
networkmanager-openvpn: Fix build with lld on musl
openconnect: Upgrade to 9.12
openconnect: Fix build with GnuTLS v3.8.1
fontforge: Fix build with gettext 0.22
Kirk Hays (1):
jack: Drop dependency on readline
Leon Anavi (2):
aml: add new recipe
neatvnc: add new recipe
Marek Vasut (2):
libiio: Use tagged v0.25
libiio: Rename to versioned recipe filename
Marine Vovard (1):
python3-kivy: Require X11 or Wayland in DISTRO_FEATURES
Mark Hatle (1):
kconfig-frontends: Avoid using hard coded /usr/include paths
Markus Volk (28):
gvfs: update 1.51.1 -> 1.51.90
gnome-themes-extra: fix datadir path
libnice: add graphviz-native dependency
libcanberra: fix api-documentation build
libgweather4: fix api-documentation build
appstream: disable docs
gtksourceview5: fix api-documentation build
libpeas: fix api-documentation build
nautilus: fix api-documentation build
evince: fix api-documentation build
usbids: add recipe
libcacard: add recipe
usbredir: upgrade 0.9.0 -> 0.13.0
spice: upgrade 0.14.2 -> 0.15.2
gnome-remote-desktop: add recipe
libosinfo: add recipe
gnome-boxes: add recipe
pipewire: upgrade 0.3.77 -> 0.3.78
spice-gtk: fix api-documentation build
flatpak: fix api-documentation build
phodav: add recipe
libdecor: update to latest commit
spice-guest-vdagent: add recipe
pipewire: upgrade 0.3.78 -> 0.3.79
spice: add missing dependency on orc
spice-guest-vdagent: add missing dependencies
libosinfo: build vapi only if gobject-introspection is enabled
gnome-boxes: remove dependency on ovmf
Martin Jansa (12):
openh264: fix installed-vs-shared QA issue with multilib
libfaketime: simplify packaging
json-schema-validator: restore 0004-cmake-Use-GNUInstallDirs.patch
phodav: make sure systemd files are packaged correctly
sysbench: avoid -L/usr/lib32 and configure-unsafe QA issue
mongodb: enable hardware crc32 only with crc in TUNE_FEATURES
khronos-cts.inc: respect MLPREFIX when appending DEPENDS with anonymous python
libcyusbserial: fix installed-vs-shipped QA issue with multilib
tcpreplay: fix pcap detection with /usr/lib32 multilib
libiio: use main branch instead of master
webkitgtk: explicitly disable JIT for armv7* with softfp
layer.conf: update LAYERSERIES_COMPAT for nanbield
Ming Liu (1):
libusbgx: usbgx.service: use Type=oneshot
Mingli Yu (4):
mariadb: Upgrade to 10.11.5
dialog: Update the SRC_URI
gnulib: Update SRC_URI
thrift: Remove buildpaths
Nicolas Marguet (1):
librelp: add ptest
Parian Golchin (1):
json-schema-validator: Updrade to 2.2.0
Pawel Langowski (1):
qcbor: add recipe
Petr Chernikov (1):
Fix empty 0.0.0-0-g0 jemalloc version by adding --with-version
Petr Gotthard (1):
python3-sdbus: add recipe
Robert Yang (1):
frr: Fix CVE-2023-41358 and CVE-2023-41360
Roger Knecht (1):
python3-schedule: add recipe
Roland Hieber (1):
fbida: update Upstream-Status for submitted patches
Ross Burton (1):
Revert "protobuf: stage protoc binary to sysroot"
Soumya (1):
yasm: fix CVE-2023-37732
Soumya Sambu (1):
krb5: Upgrade 1.20.1 -> 1.20.2
Sourav Kumar Pramanik (1):
meta-oe-components: Avoid usage of nobranch=1
Sourav Pramanik (2):
rapidjson: Avoid usage of nobranch=1
nlohmann-json: Avoid usage of nobranch=1
Stanislav Angelovic (1):
feat: bump sdbus-c++ up to v1.3.0
Sudip Mukherjee (1):
qad: Add initial recipe
Trevor Gamblin (1):
python3-kivy: fix filename
Tymoteusz Burak (2):
ttf-google-fira: add recipe
libfaketime: add recipe
Vincent Davis Jr (1):
cglm: upgrade v0.8.9 -> v0.9.1
Wang Mingyu (108):
libcloudproviders: upgrade 0.3.1 -> 0.3.2
chrony: upgrade 4.3 -> 4.4
networkmanager: upgrade 1.42.8 -> 1.44.0
weechat: upgrade 4.0.2 -> 4.0.3
ctags: upgrade 6.0.20230730.0 -> 6.0.20230813.0
fmt: upgrade 10.0.0 -> 10.1.0
gensio: upgrade 2.6.7 -> 2.7.2
googletest: upgrade 1.13.0 -> 1.14.0
lvgl: upgrade 8.3.8 -> 8.3.9
postgresql: upgrade 15.3 -> 15.4
smartmontools: upgrade 7.3 -> 7.4
xdg-dbus-proxy: upgrade 0.1.4 -> 0.1.5
yaml-cpp: upgrade 0.7.0 -> 0.8.0
libtest-harness-perl: upgrade 3.44 -> 3.47
python3-alembic: upgrade 1.11.1 -> 1.11.2
python3-async-timeout: upgrade 4.0.2 -> 4.0.3
python3-bitarray: upgrade 2.8.0 -> 2.8.1
python3-cmake: upgrade 3.27.0 -> 3.27.2
python3-coverage: upgrade 7.2.7 -> 7.3.0
python3-dnspython: upgrade 2.4.1 -> 2.4.2
python3-google-api-python-client: upgrade 2.95.0 -> 2.96.0
python3-googleapis-common-protos: upgrade 1.59.1 -> 1.60.0
python3-joblib: upgrade 1.3.1 -> 1.3.2
python3-luma-oled: upgrade 3.12.0 -> 3.13.0
python3-platformdirs: upgrade 3.9.1 -> 3.10.0
python3-pycodestyle: upgrade 2.10.0 -> 2.11.0
python3-pyflakes: upgrade 3.0.1 -> 3.1.0
python3-pymisp: upgrade 2.4.173 -> 2.4.174
python3-rdflib: upgrade 6.3.2 -> 7.0.0
python3-regex: upgrade 2023.6.3 -> 2023.8.8
python3-rich: upgrade 13.4.2 -> 13.5.2
python3-sh: upgrade 2.0.4 -> 2.0.6
python3-tox: upgrade 4.6.4 -> 4.8.0
python3-tqdm: upgrade 4.65.0 -> 4.66.1
python3-uefi-firmware: upgrade 1.10 -> 1.11
python3-virtualenv: upgrade 20.24.2 -> 20.24.3
python3-web3: upgrade 6.7.0 -> 6.8.0
python3-yamlloader: upgrade 1.2.2 -> 1.3.2
python3-zeroconf: upgrade 0.71.4 -> 0.76.0
python3-protobuf: upgrade 4.23.4 -> 4.24.0
ctags: upgrade 6.0.20230813.0 -> 6.0.20230820.0
debootstrap: upgrade 1.0.128 -> 1.0.131
gensio: upgrade 2.7.2 -> 2.7.4
gnome-bluetooth: upgrade 42.5 -> 42.6
nginx: upgrade 1.25.1 -> 1.25.2
geary: update 44.0 -> 44.1
php: upgrade 8.2.8 -> 8.2.9
python3-redis: upgrade 4.6.0 -> 5.0.0
python3-alembic: upgrade 1.11.2 -> 1.11.3
python3-awesomeversion: upgrade 23.5.0 -> 23.8.0
python3-bitstring: upgrade 4.0.2 -> 4.1.0
python3-click: upgrade 8.1.6 -> 8.1.7
python3-engineio: upgrade 4.5.1 -> 4.6.0
python3-google-api-python-client: upgrade 2.96.0 -> 2.97.0
python3-humanize: upgrade 4.7.0 -> 4.8.0
python3-mypy: upgrade 1.5.0 -> 1.5.1
python3-oauth2client: upgrade 4.1.2 -> 4.1.3
python3-protobuf: upgrade 4.24.0 -> 4.24.1
python3-pycocotools: upgrade 2.0.6 -> 2.0.7
python3-pymetno: upgrade 0.10.0 -> 0.11.0
python3-pymongo: upgrade 4.4.1 -> 4.5.0
python3-pywbem: upgrade 1.6.1 -> 1.6.2
python3-sqlalchemy: upgrade 2.0.19 -> 2.0.20
python3-tox: upgrade 4.8.0 -> 4.10.0
python3-typeguard: upgrade 4.1.0 -> 4.1.2
python3-types-setuptools: upgrade 68.0.0.3 -> 68.1.0.0
python3-zeroconf: upgrade 0.76.0 -> 0.82.1
redis: upgrade 7.0.12 -> 7.2.0
weechat: upgrade 4.0.3 -> 4.0.4
traceroute: upgrade 2.1.2 -> 2.1.3
wireshark: upgrade 4.0.7 -> 4.0.8
adw-gtk3: upgrade 4.8 -> 4.9
ctags: upgrade 6.0.20230820.0 -> 6.0.20230827.0
debootstrap: upgrade 1.0.131 -> 1.0.132
dialog: upgrade 1.3-20210509 -> 1.3-20230209
fmt: upgrade 10.1.0 -> 10.1.1
gensio: upgrade 2.7.4 -> 2.7.5
iwd: upgrade 2.7 -> 2.8
libgphoto2: upgrade 2.5.30 -> 2.5.31
libzip: upgrade 1.10.0 -> 1.10.1
logwatch: upgrade 7.8 -> 7.9
thrift: upgrade 0.18.1 -> 0.19.0
libnet-dns-perl: upgrade 1.39 -> 1.40
python3-alembic: upgrade 1.11.3 -> 1.12.0
python3-argh: upgrade 0.28.1 -> 0.29.3
python3-asttokens: upgrade 2.2.1 -> 2.4.0
python3-bitstring: upgrade 4.1.0 -> 4.1.1
python3-cmake: upgrade 3.27.2 -> 3.27.4.1
python3-diskcache: upgrade 5.6.1 -> 5.6.3
python3-engineio: upgrade 4.6.0 -> 4.7.0
python3-imageio: upgrade 2.31.1 -> 2.31.3
python3-ipython: upgrade 8.14.0 -> 8.15.0
python3-kiwisolver: upgrade 1.4.4 -> 1.4.5
python3-langtable: upgrade 0.0.62 -> 0.0.63
python3-luma-core: upgrade 2.4.0 -> 2.4.1
python3-protobuf: upgrade 4.24.1 -> 4.24.2
python3-pymisp: upgrade 2.4.174 -> 2.4.175
python3-pymodbus: upgrade 3.4.1 -> 3.5.0
python3-smbus2: upgrade 0.4.2 -> 0.4.3
python3-snagboot: upgrade 1.1 -> 1.2
python3-socketio: upgrade 5.8.0 -> 5.9.0
python3-soupsieve: upgrade 2.4.1 -> 2.5
python3-tox: upgrade 4.10.0 -> 4.11.1
python3-typeguard: upgrade 4.1.2 -> 4.1.3
python3-types-setuptools: upgrade 68.1.0.0 -> 68.1.0.1
python3-virtualenv: upgrade 20.24.3 -> 20.24.4
python3-web3: upgrade 6.8.0 -> 6.9.0
python3-zeroconf: upgrade 0.82.1 -> 0.97.0
Willy Tu (1):
abseil-cpp: upgrade 20230125.3 -> 20230802.0
Yi Zhao (7):
nftables: upgrade 1.0.7 -> 1.0.8
libssh: upgrade 0.10.4 -> 0.10.5
samba: upgrade 4.18.5 -> 4.18.6
libyang: upgrade 2.1.55 -> 2.1.111
frr: Security fix CVE-2023-3748
vsomeip: add recipe
ntp: add missing runtime dependencies
Yogita Urade (2):
poppler: fix CVE-2023-34872
hwloc: fix CVE-2022-47022
Βούλγαρη Αικατερίνη (1):
collectd: build with rrdcached plugin
poky: 71282bbc53..61531cd395:
Adrian Freihofer (2):
cmake.bbclass: cleanup spaces and tabs
cmake.bbclass: refactor cmake args
Alberto Planas (1):
bitbake.conf: add bunzip2 in HOSTTOOLS
Alexander Kanavin (18):
lib/oe/recipeutils.py: accommodate SRCPV being optional and deprecated in version check regex
python3-sphinx: correct version check
systemd-bootchart: musl fixes have been rejected upstream
openssl: build and install manpages only if they are enabled
gettext: upgrade 0.21.1 -> 0.22
connman: update 1.41 -> 1.42
libcgroup: update 3.0.0 -> 3.1.0
perlcross: update 1.4.1 -> 1.5
perl: update 5.36.1 -> 5.38.0
groff: update 1.22.4 -> 1.23.0
libglu: update 9.0.2 -> 9.0.3
libpthread-stubs: update 0.4 -> 0.5
gpgme: upgrade 1.20.0 -> 1.22.0
libgudev: upgrade 237 -> 238
gnupg: upgrade 2.4.2 -> 2.4.3
gnutls: update 3.8.0 -> 3.8.1
runqemu: check permissions of available render nodes as well as their presence
build-sysroots: target or native sysroot population need to be selected explicitly
Alexis Lothoré (7):
oeqa/utils/gitarchive: fix tag computation when creating archive
oeqa/selftest: introduce gitarchive tests
oeqa/utils/gitarchive: fix tag computation when creating archive
oeqa/selftest/gitarchive: add tests about tags lisiting when no remote is configured
oeqa/utils/gitarchive: allow to pass a logger to get_tags
oeqa/utils/gitarchive: fall back to local tags when listing existing tags
oeqa/utils/gitarchive: replace warning with info when reading local tags
Angelo Ribeiro (1):
ccache.bbclass: Add allowed list for native recipes
Anuj Mittal (3):
gstreamer1.0: upgrade 1.22.4 -> 1.22.5
harfbuzz: upgrade 8.0.1 -> 8.1.1
stress-ng: upgrade 0.15.08 -> 0.16.04
Archana Polampalli (1):
vim: upgrade 9.0.1592 -> 9.0.1664
Benjamin Bara (6):
rust-target-config: fix target_features for vfpv3d16
README: fix mail address in git example command
pixman: avoid neon on unsupported machines
nettle: avoid neon on unsupported machines
ffmpeg: avoid neon on unsupported machines
ghostscript: avoid neon on unsupported machines
Bruce Ashfield (19):
conf/machine: set preferred kernel to be 6.4
poky/poky-tiny: set preferred linux-yocto version to 6.4
linux-yocto/6.1: update to v6.1.44
linux-yocto/6.4: update to v6.4.10
linux-yocto/6.1: update to v6.1.45
kern-tools: include utility to post process config diffs
linux-yocto/6.1: fix uninitialized read in nohz_full/isolcpus setup
linux-yocto/6.4: fix uninitialized read in nohz_full/isolcpus setup
linux-yocto/6.4: update to v6.4.11
linux-yocto/6.1: update to v6.1.46
linux-yocto/6.1: fix IRQ-80 warnings
linux-yocto/6.4: fix IRQ-80 warnings
linux-yocto/6.4: fix CONFIG_F2FS_IO_TRACE configuration warning
linux-yocto/6.1: fix CONFIG_F2FS_IO_TRACE configuration warning
linux-yocto/6.4: update to v6.4.12
linux-yocto/6.1: update to v6.1.50
linux-yocto/6.4: update to v6.4.13
linux-yocto/6.4: update to v6.4.14
linux-yocto/6.1: update to v6.1.51
Changqing Li (1):
sqlite3: set CVE_STATUS for CVE-2023-36191
Chen Qi (6):
bitbake: runqueue.py: fix PSI check logic
cmake: drop OE specific environment variable support
cmake.bbclass: fix allarch override syntax
uninative.bbclass: sync to use UNINATIVE_STAGING_DIR
stress-ng: disable DEBUG_BUILD
oe-depends-dot: improve '-w' behavior
Daniel Semkowicz (1):
dev-manual: wic.rst: Update native tools build command
David Reyna (3):
bitbake: toaster: Update to Django 4.2
bitbake: toaster: import only used layers
bitbake: toaster: accommodate missing 'Image Name' value in buildinfohelper
Dmitry Baryshkov (4):
mdadm: disable strace on rv32 arch
linux-firmware: upgrade 20230625 -> 20230804
linux-firmware: package audio topology for Lenovo X13s
linux-firmware: package Dragonboard 845c sensors DSP firmware
Eilís 'pidge' Ní Fhlannagáin (1):
nativesdk-intercept: Fix bad intercept chgrp/chown logic
Emil Ekmečić (2):
bitbake: fetch2: add Google Cloud Platform (GCP) fetcher
Add GCP fetcher to list of supported protocols
Emil Kronborg Andersen (2):
dbus: add additional entries to CVE_PRODUCT
libxkbcommon: add CVE_PRODUCT
Etienne Cordonnier (2):
vim: update obsolete comment
migration-guides: system-conf -> systemd-conf
Frederic Martinsons (5):
rust: add cargo-c native recipe
classes-recipe: add cargo_c.bbclass
rust: provide examples for C library generation in rust
oeqa/runtime/rust: correct rust test
ref-manual: classes.rst: suppress rust-hello-world reference, add ptest-cargo class
Jaeyoon Jung (1):
cml1: Fix KCONFIG_CONFIG_COMMAND not conveyed fully in do_menuconfig
Jasper Orschulko (1):
cve_check: Fix cpe_id generation
Joe Slater (1):
file: fix call to localtime_r()
Jon Mason (1):
linux-yocto-dev: correct qemuarmv5 device tree location
Jose Quaresma (3):
systemd: fix efi dependency
systemd-boot: remove old gummiboot TUNE_CCARGS
pybootchartgui: also match do_compile and do_configure subtasks
Joshua Watt (9):
bitbake: bblayers/query: Add multiconfig support to `show-appends`
bitbake: cooker: Fix error message
bitbake: lib/bb: Add xattr and acl libraries
buildtools-tarball: Add libacl
classes/image_types: Add vfat image type
bitbake: fetch2: git: Check if clone directory is a git repo
wic: Add gpt-hybrid partition layout
bitbake: fetch2: git: Remove useless try..else clause
Add libacl to required packages
Julien Stephan (4):
less: upgrade 633 -> 643
less: add ptest support
patch.py: use --absolute-git-dir instead of --show-toplevel to retrieve gitdir
vulkan-samples: convert debugfix.patch to git format patch
Kai Kang (1):
webkitgtk: fix build failure with DEBUG_BUILD enabled
Khem Raj (22):
gnu-efi: Fix build on musl
systemd-boot: Fix build on musl
glibc: Upgrade to 2.38 release
glibc: Enable fortify sources by defaults
glibc: Drop --enable-tunables
glibc: Fix SVE detection on aarch64
glibc-tests: Add missing libgcc runtime dependency
kernel.bbclass: Use KERNEL_STRIP instead of STRIP
build-sysroots: Add SUMMARY field
tunes: Add support for sve instructions on armv8/armv9
arch-armv8,arch-armv9: Add sve based tune options
python3: Increase default thread stack size on musl
inetutils: Fix CVE-2023-40303
inetutils: Apply devtool formatting suggestions
qemu: Fix CVE-2023-40360
core-image-ptest: Define a fallback for SUMMARY field
dos2unix: upgrade 7.5.0 -> 7.5.1
python3: Fix ptests on musl
tcl: Add a way to skip ptests
rust-target-config: Map rust target to OE target
libc-test: Depend on musl-staticdev
apr: Fix ptests on musl
Lee Chee Yang (2):
migration-guides: add release notes for 4.2.3
migration-guides: add release notes for 4.0.12
Lei Maohui (1):
glibc-package: Fix conflict error when enable multilib.
Luan Rafael Carneiro (2):
weston: Upgrade version 12.0.1 -> 12.0.2
weston: Add sysconfdir to FILES:${PN}
Luca Ceresoli (1):
Revert "oeqa/runtime/parselogs: Exclude preempt-rt error for now"
Markus Niebel (2):
wic: fix wrong attempt to create file system in upartitioned regions
oeqa: wic: Add test for --no-table option
Markus Volk (8):
gtk4: upgrade 4.10.4 -> 4.10.5
libadwaita: upgrade 1.3.3 -> 1.3.4
gtk4: upgrade 4.10.5 -> 4.12.0
qemu: fix libudev packageconfig for systemd images
qemu: build pulseaudio support depending on distro_feature
qemu: add packageconfigs for fuse and dbus-display
gtk4: upgrade 4.12.0 -> 4.12.1
mesa: add intel raytracing support to opencl build
Martin Jansa (6):
tcl: prevent installing another copy of tzdata
cross-localedef-native: fix build on hosts with older glibc
bitbake: runqueue: show more pressure data
Makefile: remove from top-level directory
bitbake: runqueue: show number of currently running bitbake threads when pressure changes
webkitgtk: explicitly disable JIT for armv7* with softfp
Michael Halstead (2):
yocto-uninative: Update to 4.2 for glibc 2.38
yocto-uninative: Update to 4.3
Michael Opdenacker (26):
scripts/create-pull-request: update URLs to git repositories
manuals: create a dedicated "Contributor Guide" document
ref-manual: classes.rst: fix location of _ref-classes-ccache
ref-manual: update supported distro versions
contributor-guide: add missing links to mailing lists
contributor-guide: add section about why we use mailing lists
contributor-guide: add recipe style guide
ref-manual: remove AUTHOR variable
contributor guide: call section "Reporting a defect"
contributor-guide: remove obsolete pkg-config guidelines
contributor guide: remove unnecessary information about mailing lists
contributor-guide: clarification about patchtest
contributor guide: update instructions for making and sharing changes
dev-manual: disk-space: mention faster "find" command to trim sstate cache
contributor-guide: move to 2nd place in top menu
contributor-guide: submit-changes: simplify note
contributor-guide: identify component: provide link to repositories
contributor-guide: submit-changes: detail commit and patch creation
contributor-guide: submit-changes: develop sending patches section
manuals: README: update list of manuals
contributor-guide: submit-changes: reorganize and develop sections
contributor-guide: submit-changes: improvements to mailing lists section
contributor-guide: submit-changes: commit guidelines for recipes
contributor-guide: submit-changes: how to request push access to repositories
README: update/fix contribution guidelines
bitbake: doc: bitbake-user-manual: remove reference to SSTATE_MIRRORS variable
Mikko Rapeli (4):
openssh: capture ptest regression test failure logs
oeqa selftest context.py: whitespace fix
oeqa selftest context.py: remove warning from missing meta-selftest
oeqa selftest context.py: fix git commands and set branch name
Mingli Yu (2):
qemu: Add qemu-common package
webkitgtk: Add opengl to REQUIRED_DISTRO_FEATURES
Narpat Mali (1):
ffmpeg: add CVE_STATUS for CVE-2023-39018
Otavio Salvador (2):
weston-init: remove misleading comment about udev rule
weston-init: fix init code indentation
Ovidiu Panait (1):
mdadm: skip running 04update-uuid and 07revert-inplace testcases
Paulo Neves (1):
bitbake: siggen.py: Improve taskhash reproducibility
Peter Kjellerstedt (3):
bin_package.bbclass: Inhibit the default dependencies
insane.bbclass: Remove an unused variable
poky.conf: Switch to post release name/version
Peter Marko (2):
openssl: Upgrade 3.1.1 -> 3.1.2
gcc-runtime: remove bashism
Poonam Jadhav (1):
pixman: Remove duplication of license MIT
Randolph Sapp (1):
bitbake: gitsm: tolerate git-lfs in submodules
Richard Purdie (39):
bitbake: siggen: Fix indentation
bitbake: siggen: Update debug
resulttool/report: Avoid divide by zero
gcc-testsuite: Fix qemu binary filtering code logic error
gcc-testsuite: Set qemu options for mips correctly
mips/tune-mips64r2: Set qemu cpu option correctly
binutils-cross-testsuite: Pass TUNE_LDARGS to tests
arch-mips: Ensure TUNE_LDARGS is set correctly
gcc: Add patch to improve testsuite failures, particularly mips
oeqa/runtime/parselogs: Exclude preempt-rt error for now
qemu: Upgrade 8.0.3 -> 8.0.4
lib/package_manager: Improve repo artefact filtering
Revert "oeqa/utils/gitarchive: fix tag computation when creating archive"
lttng-modules: Upgrade 2.13.9 -> 2.13.10
lttng-tools: Upgrade 2.13.9 -> 2.13.10
pseudo: Fix to work with glibc 2.38
binutils: Add missing DEPENDS on pod2man
build-sysroots: Ensure dependency chains are minimal
bitbake: fetch2: Add new srcrev fetcher API
base/package: Move source revision information from PV to PKGV
recipes/classes/scripts: Drop SRCPV usage in OE-Core
glibc: Add glibc 2.38 stable updates
README: Update to point to new contributor guide
bitbake: README: Update to point to new contributor guide
bitbake: command: Avoid time intensive distractions for ping
README: Clarify/standardise contributions process
python3-numpy: Attempt to fix reproducibility issue
bitbake: doc: Document challenges of tags with git fetcher
bitbake: server/process: Add more timing debug
qemu: Upgrade 8.0.4 -> 8.1.0
qemu: Add patches to resolve x86 and then mips boot issues
mdadm: Disable further tests due to intermittent failures
Revert "oeqa selftest context.py: fix git commands and set branch name"
classes: Drop ';' delimiter from ROOTFS/IMAGE*COMMAND variables
build-appliance-image: Update to master head revision
layer.conf: Update to nanbield release series
bitbake: bitbake: Update to 2.6.0 release series/version
layer.conf: Update to nanbield release series
build-appliance-image: Update to master head revision
Ross Burton (47):
connman-conf: don't take over any ethernet devices, not just eth0
meson.bbclass: add MESON_TARGET
meson.bbclass:: update do_write_config vardeps
systemd-boot: use MESON_TARGET
systemd-boot: improve cross file generation
p11-kit: fix build without qemu-usermode
gi-docgen: depend on qemu-usermode MACHINE_FEATURES
python3-pygobject: add explicit check for qemu-usermode MACHINE_FEATURE
graphene: fix runtime detection of IEEE754 behaviour
python3: ignore disputed CVE-2023-36632
procps: backport fix for CVE-2023-4016
linux/generate-cve-exclusions.py: fix comparison
linux/cve-exclusions: update CVE_STATUS exclusions
perf: enable verbose feature detection
perf: add more PACKAGECONFIGs
perf: fix perl binding support
perf: split scripting PACKAGECONFIG into perl and python
perf: disable perl support
libtraceevent: build with Meson
linux/generate-cve-exclusions: add version check warning
linux-yocto: update CVE exclusions files
site: remove at-spi2-core values
inetutils: don't guess target paths
inetutils: remove obsolete patches
inetutils: remove obsolete cruft from do_configure
glib-networking: enable build with GnuTLS if PKCS#11 was disabled
glib-networking: use gnutls backend for TLS sockets
cve-extra-exclusions: remove historic kernel CVEs which are handled now
cve-extra-exclusions: remove BlueZ issues
linux-yocto: update kernel CVE status
linux: review some historic CVE_STATUS
glib-2.0: explicitly enable strlcpy()
scripts/oe-find-native-sysroot: use bitbake-getvar
qemu-system-native: enable PNG support
python3-build: upgrade to 1.0.0
glib-2.0: libelf has a configure option now, specify it
harfbuzz: update PACKAGECONFIG
pango: explictly enable/disable libthai
libsoup-2.4: update PACKAGECONFIG
libsoup: update PACKAGECONFIG
wayland-utils: add libdrm PACKAGECONFIG
cve-exclusion: review the last of the historical kernel CVEs
busybox: remove coreutils dependency in busybox-ptest
libgudev: explicitly disable tests and vapi
linux: update CVE exclusions
python3-build: upgrade to 1.0.3
avahi: handle invalid service types gracefully
Ryan Eatmon (1):
kernel.bbclass: Add force flag to rm calls
Samantha Jalabert (1):
bitbake: Fix disk space monitoring on cephfs
Stéphane Veyret (1):
nfs-utils: Add needed library to client
Sudip Mukherjee (4):
kea: upgrade to v2.4.0
cmake: upgrade to v3.27.4
dpkg: upgrade to v1.22.0
openssh: upgrade to v9.4p1
Tom Hochstein (1):
linux-firmware: add firmware files for NXP BT chipsets
Trevor Gamblin (16):
python3-hypothesis: upgrade 6.82.0 -> 6.82.5
python3-more-itertools: upgrade 10.0.0 -> 10.1.0
python3-pygments: upgrade 2.15.1 -> 2.16.1
python3-wheel: upgrade 0.41.0 -> 0.41.1
maintainers.inc: Add self for unmaintained Python recipes
oe-buildenv-internal: update required Python version
python3-dbusmock: upgrade 0.29.0 -> 0.29.1
python3-numpy: upgrade 1.25.1 -> 1.25.2
python3-trove-classfiers: upgrade 2023.7.6 -> 2023.8.7
python3-setuptools: upgrade 68.0.0 -> 68.1.0
python3-dtc: upgrade 1.6.1 -> 1.7.0
python3-poetry: upgrade 1.6.1 -> 1.7.0
python3-git: upgrade 3.1.32 -> 3.1.34
python3-hypothesis: upgrade 6.82.7 -> 6.84.0
python3-pytest: upgrade 7.4.0 -> 7.4.1
python3-sphinx: upgrade 7.1.1 -> 7.2.5
Ulrich Ölmann (1):
weston: fix comment
Wang Mingyu (47):
btrfs-tools: upgrade 6.3.1 -> 6.3.3
curl: upgrade 8.2.0 -> 8.2.1
file: upgrade 5.44 -> 5.45
gmp: upgrade 6.2.1 -> 6.3.0
xxhash: upgrade 0.8.1 -> 0.8.2
python3-editables: upgrade 0.4 -> 0.5
python3-markdown: upgrade 3.4.3 -> 3.4.4
python3-pathspec: upgrade 0.11.1 -> 0.11.2
python3-pip: upgrade 23.2 -> 23.2.1
python3-pyparsing: upgrade 3.1.0 -> 3.1.1
re2c: upgrade 3.0 -> 3.1
shaderc: upgrade 2023.4 -> 2023.5
sudo: upgrade 1.9.14p2 -> 1.9.14p3
libarchive: upgrade 3.6.2 -> 3.7.1
tar: upgrade 1.34 -> 1.35
bind: upgrade 9.18.17 -> 9.18.18
bluez5: upgrade 5.68 -> 5.69
ell: upgrade 0.57 -> 0.58
git: upgrade 2.41.0 -> 2.42.0
kbd: upgrade 2.6.1 -> 2.6.2
libconvert-asn1-perl: upgrade 0.33 -> 0.34
libdrm: upgrade 2.4.115 -> 2.4.116
libedit: upgrade 20221030-3.1 -> 20230828-3.1
libgit2: upgrade 1.7.0 -> 1.7.1
librepo: upgrade 1.15.1 -> 1.15.2
libsecret: upgrade 0.20.5 -> 0.21.0
libsndfile1: upgrade 1.2.0 -> 1.2.2
libxml2: upgrade 2.11.4 -> 2.11.5
mc: upgrade 4.8.29 -> 4.8.30
mpfr: upgrade 4.2.0 -> 4.2.1
neard: upgrade 0.18 -> 0.19
python3: upgrade 3.11.4 -> 3.11.5
pango: upgrade 1.50.14 -> 1.51.0
pigz: upgrade 2.7 -> 2.8
pkgconf: upgrade 1.9.5 -> 2.0.2
python3-setuptools: upgrade 68.1.0 -> 68.1.2
repo: upgrade 2.35 -> 2.36.1
shaderc: upgrade 2023.5 -> 2023.6
sqlite3: upgrade 3.42.0 -> 3.43.0
sysklogd: upgrade 2.5.0 -> 2.5.2
xz: upgrade 5.4.3 -> 5.4.4
zlib: upgrade 1.2.13 -> 1.3
python3-hypothesis: upgrade 6.82.5 -> 6.82.7
python3-pluggy: upgrade 1.2.0 -> 1.3.0
python3-sphinx-rtd-theme: upgrade 1.2.2 -> 1.3.0
python3-wheel: upgrade 0.41.1 -> 0.41.2
librepo: upgrade 1.15.2 -> 1.16.0
Yang Xu (1):
meson: don't fail if no .pyc exists
Yi Zhao (2):
dhcpcd: upgrade 10.0.1 -> 10.0.2
dhcpcd: fix buffer overflow
Yoann Congal (1):
dev-manual: remove unsupported :term: markup inside markup
Yogita Urade (1):
dropbear: fix CVE-2023-36328
Yuta Hayama (3):
linux/generate-cve-exclusions: print the generated time in UTC
linux/generate-cve-exclusions: fix mishandling of boundary values
linux-yocto: correct the wording in CVE_STATUS
Zang Ruochen (6):
tcf-agent: Disable non-building features on loongarch64
gcc-sanitizers: Add loongarch as a compatible architecture.
goarch.bbclass: Add loongarch64 to go_map_arch
qemuloongarch.inc:Change to use virtio-serial-pci
kernel-devsrc: Fixed missing loongarch64 kernel source code when test_kernelmodules
gcc: Fresh 0003-64-bit-multilib-hack.patch to add loongarch64 support
Change-Id: I4d4752539711b34471002dd1817bb7c14a590675
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
diff --git a/poky/documentation/README b/poky/documentation/README
index e8aed86..4d31036 100644
--- a/poky/documentation/README
+++ b/poky/documentation/README
@@ -34,16 +34,18 @@
Here the folders corresponding to individual manuals:
+* brief-yoctoprojectqs - Yocto Project Quick Start
* overview-manual - Yocto Project Overview and Concepts Manual
-* sdk-manual - Yocto Project Software Development Kit (SDK) Developer's Guide.
+* contributor-guide - Yocto Project and OpenEmbedded Contributor Guide
+* ref-manual - Yocto Project Reference Manual
* bsp-guide - Yocto Project Board Support Package (BSP) Developer's Guide
* dev-manual - Yocto Project Development Tasks Manual
* kernel-dev - Yocto Project Linux Kernel Development Manual
-* ref-manual - Yocto Project Reference Manual
-* brief-yoctoprojectqs - Yocto Project Quick Start
* profile-manual - Yocto Project Profiling and Tracing Manual
+* sdk-manual - Yocto Project Software Development Kit (SDK) Developer's Guide.
* toaster-manual - Toaster User Manual
* test-manual - Yocto Project Test Environment Manual
+* migration-guides - Yocto Project Release and Migration Notes
Each folder is self-contained regarding content and figures.
diff --git a/poky/documentation/bsp-guide/bsp.rst b/poky/documentation/bsp-guide/bsp.rst
index 4d64c65..3be314b 100644
--- a/poky/documentation/bsp-guide/bsp.rst
+++ b/poky/documentation/bsp-guide/bsp.rst
@@ -927,8 +927,8 @@
- The name and contact information for the BSP layer maintainer.
This is the person to whom patches and questions should be sent.
For information on how to find the right person, see the
- ":ref:`dev-manual/changes:submitting a change to the yocto project`"
- section in the Yocto Project Development Tasks Manual.
+ :doc:`../contributor-guide/submit-changes` section in the Yocto Project and
+ OpenEmbedded Contributor Guide.
- Instructions on how to build the BSP using the BSP layer.
diff --git a/poky/documentation/contributor-guide/identify-component.rst b/poky/documentation/contributor-guide/identify-component.rst
new file mode 100644
index 0000000..a28391a
--- /dev/null
+++ b/poky/documentation/contributor-guide/identify-component.rst
@@ -0,0 +1,31 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Identify the component
+**********************
+
+The Yocto Project and OpenEmbedded ecosystem is built of :term:`layers <Layer>`
+so the first step is to identify the component where the issue likely lies.
+For example, if you have a hardware issue, it is likely related to the BSP
+you are using and the best place to seek advice would be from the BSP provider
+or :term:`layer`. If the issue is a build/configuration one and a distro is in
+use, they would likely be the first place to ask questions. If the issue is a
+generic one and/or in the core classes or metadata, the core layer or BitBake
+might be the appropriate component.
+
+Each metadata layer being used should contain a ``README`` file and that should
+explain where to report issues, where to send changes and how to contact the
+maintainers.
+
+If the issue is in the core metadata layer (OpenEmbedded-Core) or in BitBake,
+issues can be reported in the :yocto_bugs:`Yocto Project Bugzilla <>`. The
+:yocto_lists:`yocto </g/yocto>` mailing list is a general “catch-all” location
+where questions can be sent if you can’t work out where something should go.
+
+:term:`Poky` is a commonly used “combination” repository where multiple
+components have been combined (:oe_git:`bitbake </bitbake>`,
+:oe_git:`openembedded-core </openembedded-core>`,
+:yocto_git:`meta-yocto </meta-yocto>` and
+:yocto_git:`yocto-docs </yocto-docs>`). Patches should be submitted against the
+appropriate individual component rather than :term:`Poky` itself as detailed in
+the appropriate ``README`` file.
+
diff --git a/poky/documentation/contributor-guide/index.rst b/poky/documentation/contributor-guide/index.rst
new file mode 100644
index 0000000..a832169
--- /dev/null
+++ b/poky/documentation/contributor-guide/index.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+================================================
+Yocto Project and OpenEmbedded Contributor Guide
+================================================
+
+The Yocto Project and OpenEmbedded are open-source, community-based projects so
+contributions are very welcome, it is how the code evolves and everyone can
+effect change. Contributions take different forms, if you have a fix for an
+issue you’ve run into, a patch is the most appropriate way to contribute it.
+If you run into an issue but don’t have a solution, opening a defect in
+:yocto_bugs:`Bugzilla <>` or asking questions on the mailing lists might be
+more appropriate. This guide intends to point you in the right direction to
+this.
+
+
+.. toctree::
+ :caption: Table of Contents
+ :numbered:
+
+ identify-component
+ report-defect
+ recipe-style-guide
+ submit-changes
+
+.. include:: /boilerplate.rst
diff --git a/poky/documentation/contributor-guide/recipe-style-guide.rst b/poky/documentation/contributor-guide/recipe-style-guide.rst
new file mode 100644
index 0000000..a0d513e
--- /dev/null
+++ b/poky/documentation/contributor-guide/recipe-style-guide.rst
@@ -0,0 +1,257 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Recipe Style Guide
+******************
+
+Recipe Naming Conventions
+=========================
+
+In general, most recipes should follow the naming convention
+``recipes-category/package/packagename_version.bb``. Recipes for related
+projects may share the same package directory. ``packagename``, ``category``,
+and ``package`` may contain hyphens, but hyphens are not allowed in ``version``.
+
+If the recipe is tracking a Git revision that does not correspond to a released
+version of the software, ``version`` may be ``git`` (e.g. ``packagename_git.bb``)
+
+Version Policy
+==============
+
+Our versions follow the form ``<package epoch>:<package version>-<package revision>``
+or in BitBake variable terms ${:term:`PE`}:${:term:`PV`}-${:term:`PR`}. We
+generally follow the `Debian <https://www.debian.org/doc/debian-policy/ch-controlfields.html#version>`__
+version policy which defines these terms.
+
+In most cases the version :term:`PV` will be set automatically from the recipe
+file name. It is recommended to use released versions of software as these are
+revisions that upstream are expecting people to use.
+
+Package versions should always compare and sort correctly so that upgrades work
+as expected. With conventional versions such as ``1.4`` upgrading ``to 1.5``
+this happens naturally, but some versions don't sort. For example,
+``1.5 Release Candidate 2`` could be written as ``1.5rc2`` but this sorts after
+``1.5``, so upgrades from feeds won't happen correctly.
+
+Instead the tilde (``~``) operator can be used, which sorts before the empty
+string so ``1.5~rc2`` comes before ``1.5``. There is a historical syntax which
+may be found where :term:`PV` is set as a combination of the prior version
+``+`` the pre-release version, for example ``PV=1.4+1.5rc2``. This is a valid
+syntax but the tilde form is preferred.
+
+For version comparisons, the ``opkg-compare-versions`` program from
+``opkg-utils`` can be useful when attempting to determine how two version
+numbers compare to each other. Our definitive version comparison algorithm is
+the one within bitbake which aims to match those of the package managers and
+Debian policy closely.
+
+When a recipe references a git revision that does not correspond to a released
+version of software (e.g. is not a tagged version), the :term:`PV` variable
+should include the Git revision using the following to make the
+version clear::
+
+ PV = "<version>+git${SRCPV}"
+
+In this case, ``<version>`` should be the most recently released version of the
+software from the current source revision (``git describe`` can be useful for
+determining this). Whilst not recommended for published layers, this format is
+also useful when using :term:`AUTOREV` to set the recipe to increment source
+control revisions automatically, which can be useful during local development.
+
+Version Number Changes
+======================
+
+The :term:`PR` variable is used to indicate different revisions of a recipe
+that reference the same upstream source version. It can be used to force a
+new version of a package to be installed onto a device from a package feed.
+These once had to be set manually but in most cases these can now be set and
+incremented automatically by a PR Server connected with a package feed.
+
+When :term:`PV` increases, any existing :term:`PR` value can and should be
+removed.
+
+If :term:`PV` changes in such a way that it does not increase with respect to
+the previous value, you need to increase :term:`PE` to ensure package managers
+will upgrade it correctly. If unset you should set :term:`PE` to "1" since
+the default of empty is easily confused with "0" depending on the package
+manager. :term:`PE` can only have an integer value.
+
+Recipe formatting
+=================
+
+Variable Formatting
+-------------------
+
+- Variable assignment should a space around each side of the operator, e.g.
+ ``FOO = "bar"``, not ``FOO="bar"``.
+
+- Double quotes should be used on the right-hand side of the assignment,
+ e.g. ``FOO = "bar"`` not ``FOO = 'bar'``
+
+- Spaces should be used for indenting variables, with 4 spaces per tab
+
+- Long variables should be split over multiple lines when possible by using
+ the continuation character (``\``)
+
+- When splitting a long variable over multiple lines, all continuation lines
+ should be indented (with spaces) to align with the start of the quote on the
+ first line::
+
+ FOO = "this line is \
+ long \
+ "
+
+ Instead of::
+
+ FOO = "this line is \
+ long \
+ "
+
+Python Function formatting
+--------------------------
+
+- Spaces must be used for indenting Python code, with 4 spaces per tab
+
+Shell Function formatting
+-------------------------
+
+- The formatting of shell functions should be consistent within layers.
+ Some use tabs, some use spaces.
+
+Recipe metadata
+===============
+
+Required Variables
+------------------
+
+The following variables should be included in all recipes:
+
+- :term:`SUMMARY`: a one line description of the upstream project
+
+- :term:`DESCRIPTION`: an extended description of the upstream project,
+ possibly with multiple lines. If no reasonable description can be written,
+ this may be omitted as it defaults to :term:`SUMMARY`.
+
+- :term:`HOMEPAGE`: the URL to the upstream projects homepage.
+
+- :term:`BUGTRACKER`: the URL upstream projects bug tracking website,
+ if applicable.
+
+Recipe Ordering
+---------------
+
+When a variable is defined in recipes and classes, variables should follow the
+general order when possible:
+
+- :term:`SUMMARY`
+- :term:`DESCRIPTION`
+- :term:`HOMEPAGE`
+- :term:`BUGTRACKER`
+- :term:`SECTION`
+- :term:`LICENSE`
+- :term:`LIC_FILES_CHKSUM`
+- :term:`DEPENDS`
+- :term:`PROVIDES`
+- :term:`PV`
+- :term:`SRC_URI`
+- :term:`SRCREV`
+- :term:`S`
+- ``inherit ...``
+- :term:`PACKAGECONFIG`
+- Build class specific variables such as ``EXTRA_QMAKEVARS_POST`` and :term:`EXTRA_OECONF`
+- Tasks such as :ref:`ref-tasks-configure`
+- :term:`PACKAGE_ARCH`
+- :term:`PACKAGES`
+- :term:`FILES`
+- :term:`RDEPENDS`
+- :term:`RRECOMMENDS`
+- :term:`RSUGGESTS`
+- :term:`RPROVIDES`
+- :term:`RCONFLICTS`
+- :term:`BBCLASSEXTEND`
+
+There are some cases where ordering is important and these cases would override
+this default order. Examples include:
+
+- :term:`PACKAGE_ARCH` needing to be set before ``inherit packagegroup``
+
+Tasks should be ordered based on the order they generally execute. For commonly
+used tasks this would be:
+
+- :ref:`ref-tasks-fetch`
+- :ref:`ref-tasks-unpack`
+- :ref:`ref-tasks-patch`
+- :ref:`ref-tasks-prepare_recipe_sysroot`
+- :ref:`ref-tasks-configure`
+- :ref:`ref-tasks-compile`
+- :ref:`ref-tasks-install`
+- :ref:`ref-tasks-populate_sysroot`
+- :ref:`ref-tasks-package`
+
+Custom tasks should be sorted similarly.
+
+Package specific variables are typically grouped together, e.g.::
+
+ RDEPENDS:${PN} = “foo”
+ RDEPENDS:${PN}-libs = “bar”
+
+ RRECOMMENDS:${PN} = “one”
+ RRECOMMENDS:${PN}-libs = “two”
+
+Recipe License Fields
+---------------------
+
+Recipes need to define both the :term:`LICENSE` and
+:term:`LIC_FILES_CHKSUM` variables:
+
+- :term:`LICENSE`: This variable specifies the license for the software.
+ If you do not know the license under which the software you are
+ building is distributed, you should go to the source code and look
+ for that information. Typical files containing this information
+ include ``COPYING``, :term:`LICENSE`, and ``README`` files. You could
+ also find the information near the top of a source file. For example,
+ given a piece of software licensed under the GNU General Public
+ License version 2, you would set :term:`LICENSE` as follows::
+
+ LICENSE = "GPL-2.0-only"
+
+ The licenses you specify within :term:`LICENSE` can have any name as long
+ as you do not use spaces, since spaces are used as separators between
+ license names. For standard licenses, use the names of the files in
+ ``meta/files/common-licenses/`` or the :term:`SPDXLICENSEMAP` flag names
+ defined in ``meta/conf/licenses.conf``.
+
+- :term:`LIC_FILES_CHKSUM`: The OpenEmbedded build system uses this
+ variable to make sure the license text has not changed. If it has,
+ the build produces an error and it affords you the chance to figure
+ it out and correct the problem.
+
+ You need to specify all applicable licensing files for the software.
+ At the end of the configuration step, the build process will compare
+ the checksums of the files to be sure the text has not changed. Any
+ differences result in an error with the message containing the
+ current checksum. For more explanation and examples of how to set the
+ :term:`LIC_FILES_CHKSUM` variable, see the
+ ":ref:`dev-manual/licenses:tracking license changes`" section.
+
+ To determine the correct checksum string, you can list the
+ appropriate files in the :term:`LIC_FILES_CHKSUM` variable with incorrect
+ md5 strings, attempt to build the software, and then note the
+ resulting error messages that will report the correct md5 strings.
+ See the ":ref:`dev-manual/new-recipe:fetching code`" section for
+ additional information.
+
+ Here is an example that assumes the software has a ``COPYING`` file::
+
+ LIC_FILES_CHKSUM = "file://COPYING;md5=xxx"
+
+ When you try to build the
+ software, the build system will produce an error and give you the
+ correct string that you can substitute into the recipe file for a
+ subsequent build.
+
+Tips and Guidelines for Writing Recipes
+---------------------------------------
+
+- Use :term:`BBCLASSEXTEND` instead of creating separate recipes such as ``-native``
+ and ``-nativesdk`` ones, whenever possible. This avoids having to maintain multiple
+ recipe files at the same time.
diff --git a/poky/documentation/contributor-guide/report-defect.rst b/poky/documentation/contributor-guide/report-defect.rst
new file mode 100644
index 0000000..8ef133b
--- /dev/null
+++ b/poky/documentation/contributor-guide/report-defect.rst
@@ -0,0 +1,67 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Reporting a Defect Against the Yocto Project and OpenEmbedded
+**************************************************************
+
+You can use the Yocto Project instance of
+`Bugzilla <https://www.bugzilla.org/about/>`__ to submit a defect (bug)
+against BitBake, OpenEmbedded-Core, against any other Yocto Project component
+or for tool issues. For additional information on this implementation of
+Bugzilla see the ":ref:`Yocto Project Bugzilla <resources-bugtracker>`" section
+in the Yocto Project Reference Manual. For more detail on any of the following
+steps, see the Yocto Project
+:yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>`.
+
+Use the following general steps to submit a bug:
+
+#. Open the Yocto Project implementation of :yocto_bugs:`Bugzilla <>`.
+
+#. Click "File a Bug" to enter a new bug.
+
+#. Choose the appropriate "Classification", "Product", and "Component"
+ for which the bug was found. Bugs for the Yocto Project fall into
+ one of several classifications, which in turn break down into
+ several products and components. For example, for a bug against the
+ ``meta-intel`` layer, you would choose "Build System, Metadata &
+ Runtime", "BSPs", and "bsps-meta-intel", respectively.
+
+#. Choose the "Version" of the Yocto Project for which you found the
+ bug (e.g. &DISTRO;).
+
+#. Determine and select the "Severity" of the bug. The severity
+ indicates how the bug impacted your work.
+
+#. Choose the "Hardware" that the bug impacts.
+
+#. Choose the "Architecture" that the bug impacts.
+
+#. Choose a "Documentation change" item for the bug. Fixing a bug might
+ or might not affect the Yocto Project documentation. If you are
+ unsure of the impact to the documentation, select "Don't Know".
+
+#. Provide a brief "Summary" of the bug. Try to limit your summary to
+ just a line or two and be sure to capture the essence of the bug.
+
+#. Provide a detailed "Description" of the bug. You should provide as
+ much detail as you can about the context, behavior, output, and so
+ forth that surrounds the bug. You can even attach supporting files
+ for output from logs by using the "Add an attachment" button.
+
+#. Click the "Submit Bug" button submit the bug. A new Bugzilla number
+ is assigned to the bug and the defect is logged in the bug tracking
+ system.
+
+Once you file a bug, the bug is processed by the Yocto Project Bug
+Triage Team and further details concerning the bug are assigned (e.g.
+priority and owner). You are the "Submitter" of the bug and any further
+categorization, progress, or comments on the bug result in Bugzilla
+sending you an automated email concerning the particular change or
+progress to the bug.
+
+There are no guarantees about if or when a bug might be worked on since an
+open-source project has no dedicated engineering resources. However, the
+project does have a good track record of resolving common issues over the
+medium and long term. We do encourage people to file bugs so issues are
+at least known about. It helps other users when they find somebody having
+the same issue as they do, and an issue that is unknown is much less likely
+to ever be fixed!
diff --git a/poky/documentation/contributor-guide/submit-changes.rst b/poky/documentation/contributor-guide/submit-changes.rst
new file mode 100644
index 0000000..cda2d12
--- /dev/null
+++ b/poky/documentation/contributor-guide/submit-changes.rst
@@ -0,0 +1,754 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Contributing Changes to a Component
+************************************
+
+Contributions to the Yocto Project and OpenEmbedded are very welcome.
+Because the system is extremely configurable and flexible, we recognize
+that developers will want to extend, configure or optimize it for their
+specific uses.
+
+.. _ref-why-mailing-lists:
+
+Contributing through mailing lists --- Why not using web-based workflows?
+=========================================================================
+
+Both Yocto Project and OpenEmbedded have many key components that are
+maintained by patches being submitted on mailing lists. We appreciate this
+approach does look a little old fashioned when other workflows are available
+through web technology such as GitHub, GitLab and others. Since we are often
+asked this question, we’ve decided to document the reasons for using mailing
+lists.
+
+One significant factor is that we value peer review. When a change is proposed
+to many of the core pieces of the project, it helps to have many eyes of review
+go over them. Whilst there is ultimately one maintainer who needs to make the
+final call on accepting or rejecting a patch, the review is made by many eyes
+and the exact people reviewing it are likely unknown to the maintainer. It is
+often the surprise reviewer that catches the most interesting issues!
+
+This is in contrast to the "GitHub" style workflow where either just a
+maintainer makes that review, or review is specifically requested from
+nominated people. We believe there is significant value added to the codebase
+by this peer review and that moving away from mailing lists would be to the
+detriment of our code.
+
+We also need to acknowledge that many of our developers are used to this
+mailing list workflow and have worked with it for years, with tools and
+processes built around it. Changing away from this would result in a loss
+of key people from the project, which would again be to its detriment.
+
+The projects are acutely aware that potential new contributors find the
+mailing list approach off-putting and would prefer a web-based GUI.
+Since we don’t believe that can work for us, the project is aiming to ensure
+`patchwork <https://patchwork.yoctoproject.org/>`__ is available to help track
+patch status and also looking at how tooling can provide more feedback to users
+about patch status. We are looking at improving tools such as ``patchtest`` to
+test user contributions before they hit the mailing lists and also at better
+documenting how to use such workflows since we recognise that whilst this was
+common knowledge a decade ago, it might not be as familiar now.
+
+Preparing Changes for Submission
+================================
+
+Set up Git
+----------
+
+The first thing to do is to install Git packages. Here is an example
+on Debian and Ubuntu::
+
+ sudo aptitude install git-core git-email
+
+Then, you need to set a name and e-mail address that Git will
+use to identify your commits::
+
+ git config --global user.name "Ada Lovelace"
+ git config --global user.email "ada.lovelace@gmail.com"
+
+Clone the Git repository for the component to modify
+----------------------------------------------------
+
+After identifying the component to modify as described in the
+":doc:`../contributor-guide/identify-component`" section, clone the
+corresponding Git repository. Here is an example for OpenEmbedded-Core::
+
+ git clone https://git.openembedded.org/openembedded-core
+ cd openembedded-core
+
+Create a new branch
+-------------------
+
+Then, create a new branch in your local Git repository
+for your changes, starting from the reference branch in the upstream
+repository (often called ``master``)::
+
+ $ git checkout <ref-branch>
+ $ git checkout -b my-changes
+
+If you have completely unrelated sets of changes to submit, you should even
+create one branch for each set.
+
+Implement and commit changes
+----------------------------
+
+In each branch, you should group your changes into small, controlled and
+isolated ones. Keeping changes small and isolated aids review, makes
+merging/rebasing easier and keeps the change history clean should anyone need
+to refer to it in future.
+
+To this purpose, you should create *one Git commit per change*,
+corresponding to each of the patches you will eventually submit.
+See `further guidance <https://www.kernel.org/doc/html/latest/process/submitting-patches.html#separate-your-changes>`__
+in the Linux kernel documentation if needed.
+
+For example, when you intend to add multiple new recipes, each recipe
+should be added in a separate commit. For upgrades to existing recipes,
+the previous version should usually be deleted as part of the same commit
+to add the upgraded version.
+
+#. *Stage Your Changes:* Stage your changes by using the ``git add``
+ command on each file you modified. If you want to stage all the
+ files you modified, you can even use the ``git add -A`` command.
+
+#. *Commit Your Changes:* This is when you can create separate commits. For
+ each commit to create, use the ``git commit -s`` command with the files
+ or directories you want to include in the commit::
+
+ $ git commit -s file1 file2 dir1 dir2 ...
+
+ To include **a**\ ll staged files::
+
+ $ git commit -sa
+
+ - The ``-s`` option of ``git commit`` adds a "Signed-off-by:" line
+ to your commit message. There is the same requirement for contributing
+ to the Linux kernel. Adding such a line signifies that you, the
+ submitter, have agreed to the `Developer's Certificate of Origin 1.1
+ <https://www.kernel.org/doc/html/latest/process/submitting-patches.html#sign-your-work-the-developer-s-certificate-of-origin>`__
+ as follows:
+
+ .. code-block:: none
+
+ Developer's Certificate of Origin 1.1
+
+ By making a contribution to this project, I certify that:
+
+ (a) The contribution was created in whole or in part by me and I
+ have the right to submit it under the open source license
+ indicated in the file; or
+
+ (b) The contribution is based upon previous work that, to the best
+ of my knowledge, is covered under an appropriate open source
+ license and I have the right under that license to submit that
+ work with modifications, whether created in whole or in part
+ by me, under the same open source license (unless I am
+ permitted to submit under a different license), as indicated
+ in the file; or
+
+ (c) The contribution was provided directly to me by some other
+ person who certified (a), (b) or (c) and I have not modified
+ it.
+
+ (d) I understand and agree that this project and the contribution
+ are public and that a record of the contribution (including all
+ personal information I submit with it, including my sign-off) is
+ maintained indefinitely and may be redistributed consistent with
+ this project or the open source license(s) involved.
+
+ - Provide a single-line summary of the change and, if more
+ explanation is needed, provide more detail in the body of the
+ commit. This summary is typically viewable in the "shortlist" of
+ changes. Thus, providing something short and descriptive that
+ gives the reader a summary of the change is useful when viewing a
+ list of many commits. You should prefix this short description
+ with the recipe name (if changing a recipe), or else with the
+ short form path to the file being changed.
+
+ .. note::
+
+ To find a suitable prefix for the commit summary, a good idea
+ is to look for prefixes used in previous commits touching the
+ same files or directories::
+
+ git log --oneline <paths>
+
+ - For the body of the commit message, provide detailed information
+ that describes what you changed, why you made the change, and the
+ approach you used. It might also be helpful if you mention how you
+ tested the change. Provide as much detail as you can in the body
+ of the commit message.
+
+ .. note::
+
+ If the single line summary is enough to describe a simple
+ change, the body of the commit message can be left empty.
+
+ - If the change addresses a specific bug or issue that is associated
+ with a bug-tracking ID, include a reference to that ID in your
+ detailed description. For example, the Yocto Project uses a
+ specific convention for bug references --- any commit that addresses
+ a specific bug should use the following form for the detailed
+ description. Be sure to use the actual bug-tracking ID from
+ Bugzilla for bug-id::
+
+ Fixes [YOCTO #bug-id]
+
+ detailed description of change
+
+#. *Crediting contributors:* By using the ``git commit --amend`` command,
+ you can add some tags to the commit description to credit other contributors
+ to the change:
+
+ - ``Reported-by``: name and email of a person reporting a bug
+ that your commit is trying to fix. This is a good practice
+ to encourage people to go on reporting bugs and let them
+ know that their reports are taken into account.
+
+ - ``Suggested-by``: name and email of a person to credit for the
+ idea of making the change.
+
+ - ``Tested-by``, ``Reviewed-by``: name and email for people having
+ tested your changes or reviewed their code. These fields are
+ usually added by the maintainer accepting a patch, or by
+ yourself if you submitted your patches to early reviewers,
+ or are submitting an unmodified patch again as part of a
+ new iteration of your patch series.
+
+ - ``CC:`` Name and email of people you want to send a copy
+ of your changes to. This field will be used by ``git send-email``.
+
+ See `more guidance about using such tags
+ <https://www.kernel.org/doc/html/latest/process/submitting-patches.html#using-reported-by-tested-by-reviewed-by-suggested-by-and-fixes>`__
+ in the Linux kernel documentation.
+
+Creating Patches
+================
+
+Here is the general procedure on how to create patches to be sent through email:
+
+#. *Describe the Changes in your Branch:* If you have more than one commit
+ in your branch, it's recommended to provide a cover letter describing
+ the series of patches you are about to send.
+
+ For this purpose, a good solution is to store the cover letter contents
+ in the branch itself::
+
+ git branch --edit-description
+
+ This will open a text editor to fill in the description for your
+ changes. This description can be updated when necessary and will
+ be used by Git to create the cover letter together with the patches.
+
+ It is recommended to start this description with a title line which
+ will serve a the subject line for the cover letter.
+
+#. *Generate Patches for your Branch:* The ``git format-patch`` command will
+ generate patch files for each of the commits in your branch. You need
+ to pass the reference branch your branch starts from.
+
+ If you branch didn't need a description in the previous step::
+
+ $ git format-patch <ref-branch>
+
+ If you filled a description for your branch, you will want to generate
+ a cover letter too::
+
+ $ git format-patch --cover-letter --cover-from-description=auto <ref-branch>
+
+ After the command is run, the current directory contains numbered
+ ``.patch`` files for the commits in your branch. If you have a cover
+ letter, it will be in the ``0000-cover-letter.patch``.
+
+ .. note::
+
+ The ``--cover-from-description=auto`` option makes ``git format-patch``
+ use the first paragraph of the branch description as the cover
+ letter title. Another possibility, which is easier to remember, is to pass
+ only the ``--cover-letter`` option, but you will have to edit the
+ subject line manually every time you generate the patches.
+
+ See the `git format-patch manual page <https://git-scm.com/docs/git-format-patch>`__
+ for details.
+
+#. *Review each of the Patch Files:* This final review of the patches
+ before sending them often allows to view your changes from a different
+ perspective and discover defects such as typos, spacing issues or lines
+ or even files that you didn't intend to modify. This review should
+ include the cover letter patch too.
+
+ If necessary, rework your commits as described in
+ ":ref:`contributor-guide/submit-changes:taking patch review into account`".
+
+Sending the Patches via Email
+=============================
+
+Using Git to Send Patches
+-------------------------
+
+To submit patches through email, it is very important that you send them
+without any whitespace or HTML formatting that either you or your mailer
+introduces. The maintainer that receives your patches needs to be able
+to save and apply them directly from your emails, using the ``git am``
+command.
+
+Using the ``git send-email`` command is the only error-proof way of sending
+your patches using email since there is no risk of compromising whitespace
+in the body of the message, which can occur when you use your own mail
+client. It will also properly include your patches as *inline attachments*,
+which is not easy to do with standard e-mail clients without breaking lines.
+If you used your regular e-mail client and shared your patches as regular
+attachments, reviewers wouldn't be able to quote specific sections of your
+changes and make comments about them.
+
+Setting up Git to Send Email
+----------------------------
+
+The ``git send-email`` command can send email by using a local or remote
+Mail Transport Agent (MTA) such as ``msmtp``, ``sendmail``, or
+through a direct SMTP configuration in your Git ``~/.gitconfig`` file.
+
+Here are the settings for letting ``git send-email`` send e-mail through your
+regular STMP server, using a Google Mail account as an example::
+
+ git config --global sendemail.smtpserver smtp.gmail.com
+ git config --global sendemail.smtpserverport 587
+ git config --global sendemail.smtpencryption tls
+ git config --global sendemail.smtpuser ada.lovelace@gmail.com
+ git config --global sendemail.smtppass = XXXXXXXX
+
+These settings will appear in the ``.gitconfig`` file in your home directory.
+
+If you neither can use a local MTA nor SMTP, make sure you use an email client
+that does not touch the message (turning spaces in tabs, wrapping lines, etc.).
+A good mail client to do so is Pine (or Alpine) or Mutt. For more
+information about suitable clients, see `Email clients info for Linux
+<https://www.kernel.org/doc/html/latest/process/email-clients.html>`__
+in the Linux kernel sources.
+
+If you use such clients, just include the patch in the body of your email.
+
+Finding a Suitable Mailing List
+-------------------------------
+
+You should send patches to the appropriate mailing list so that they can be
+reviewed by the right contributors and merged by the appropriate maintainer.
+The specific mailing list you need to use depends on the location of the code
+you are changing.
+
+If people have concerns with any of the patches, they will usually voice
+their concern over the mailing list. If patches do not receive any negative
+reviews, the maintainer of the affected layer typically takes them, tests them,
+and then based on successful testing, merges them.
+
+In general, each component (e.g. layer) should have a ``README`` file
+that indicates where to send the changes and which process to follow.
+
+The "poky" repository, which is the Yocto Project's reference build
+environment, is a hybrid repository that contains several individual
+pieces (e.g. BitBake, Metadata, documentation, and so forth) built using
+the combo-layer tool. The upstream location used for submitting changes
+varies by component:
+
+- *Core Metadata:* Send your patches to the
+ :oe_lists:`openembedded-core </g/openembedded-core>`
+ mailing list. For example, a change to anything under the ``meta`` or
+ ``scripts`` directories should be sent to this mailing list.
+
+- *BitBake:* For changes to BitBake (i.e. anything under the
+ ``bitbake`` directory), send your patches to the
+ :oe_lists:`bitbake-devel </g/bitbake-devel>`
+ mailing list.
+
+- *"meta-\*" trees:* These trees contain Metadata. Use the
+ :yocto_lists:`poky </g/poky>` mailing list.
+
+- *Documentation*: For changes to the Yocto Project documentation, use the
+ :yocto_lists:`docs </g/docs>` mailing list.
+
+For changes to other layers and tools hosted in the Yocto Project source
+repositories (i.e. :yocto_git:`git.yoctoproject.org <>`), use the
+:yocto_lists:`yocto </g/yocto/>` general mailing list.
+
+For changes to other layers hosted in the OpenEmbedded source
+repositories (i.e. :oe_git:`git.openembedded.org <>`), use
+the :oe_lists:`openembedded-devel </g/openembedded-devel>`
+mailing list, unless specified otherwise in the layer's ``README`` file.
+
+If you intend to submit a new recipe that neither fits into the core Metadata,
+nor into :oe_git:`meta-openembedded </meta-openembedded/>`, you should
+look for a suitable layer in https://layers.openembedded.org. If similar
+recipes can be expected, you may consider :ref:`dev-manual/layers:creating your own layer`.
+
+If in doubt, please ask on the :yocto_lists:`yocto </g/yocto/>` general mailing list
+or on the :oe_lists:`openembedded-devel </g/openembedded-devel>` mailing list.
+
+Subscribing to the Mailing List
+-------------------------------
+
+After identifying the right mailing list to use, you will have to subscribe to
+it if you haven't done it yet.
+
+If you attempt to send patches to a list you haven't subscribed to, your email
+will be returned as undelivered.
+
+However, if you don't want to be receive all the messages sent to a mailing list,
+you can set your subscription to "no email". You will still be a subscriber able
+to send messages, but you won't receive any e-mail. If people reply to your message,
+their e-mail clients will default to including your email address in the
+conversation anyway.
+
+Anyway, you'll also be able to access the new messages on mailing list archives,
+either through a web browser, or for the lists archived on https://lore.kernelorg,
+through an individual newsgroup feed or a git repository.
+
+Sending Patches via Email
+-------------------------
+
+At this stage, you are ready to send your patches via email. Here's the
+typical usage of ``git send-email``::
+
+ git send-email --to <mailing-list-address> *.patch
+
+Then, review each subject line and list of recipients carefully, and then
+and then allow the command to send each message.
+
+You will see that ``git send-email`` will automatically copy the people listed
+in any commit tags such as ``Signed-off-by`` or ``Reported-by``.
+
+In case you are sending patches for :oe_git:`meta-openembedded </meta-openembedded/>`
+or any layer other than :oe_git:`openembedded-core </openembedded-core/>`,
+please add the appropriate prefix so that it is clear which layer the patch is intended
+to be applied to::
+
+ git send-email --subject-prefix="meta-oe][PATCH" ...
+
+.. note::
+
+ It is actually possible to send patches without generating them
+ first. However, make sure you have reviewed your changes carefully
+ because ``git send-email`` will just show you the title lines of
+ each patch.
+
+ Here's a command you can use if you just have one patch in your
+ branch::
+
+ git send-email --to <mailing-list-address> -1
+
+ If you have multiple patches and a cover letter, you can send
+ patches for all the commits between the reference branch
+ and the tip of your branch::
+
+ git send-email --cover-letter --cover-from-description=auto --to <mailing-list-address> -M <ref-branch>
+
+See the `git send-email manual page <https://git-scm.com/docs/git-send-email>`__
+for details.
+
+Troubleshooting Email Issues
+----------------------------
+
+Fixing your From identity
+~~~~~~~~~~~~~~~~~~~~~~~~~
+
+We have a frequent issue with contributors whose patches are received through
+a ``From`` field which doesn't match the ``Signed-off-by`` information. Here is
+a typical example for people sending from a domain name with :wikipedia:`DMARC`::
+
+ From: "Linus Torvalds via lists.openembedded.org <linus.torvalds=kernel.org@lists.openembedded.org>"
+
+This ``From`` field is used by ``git am`` to recreate commits with the right
+author name. The following will ensure that your e-mails have an additional
+``From`` field at the beginning of the Email body, and therefore that
+maintainers accepting your patches don't have to fix commit author information
+manually::
+
+ git config --global sendemail.from "linus.torvalds@kernel.org"
+
+The ``sendemail.from`` should match your ``user.email`` setting,
+which appears in the ``Signed-off-by`` line of your commits.
+
+Streamlining git send-email usage
+---------------------------------
+
+If you want to save time and not be forced to remember the right options to use
+with ``git send-email``, you can use Git configuration settings.
+
+- To set the right mailing list address for a given repository::
+
+ git config --local sendemail.to openembedded-devel@lists.openembedded.org
+
+- If the mailing list requires a subject prefix for the layer
+ (this only works when the repository only contains one layer)::
+
+ git config --local format.subjectprefix "meta-something][PATCH"
+
+Using Scripts to Push a Change Upstream and Request a Pull
+==========================================================
+
+For larger patch series it is preferable to send a pull request which not
+only includes the patch but also a pointer to a branch that can be pulled
+from. This involves making a local branch for your changes, pushing this
+branch to an accessible repository and then using the ``create-pull-request``
+and ``send-pull-request`` scripts from openembedded-core to create and send a
+patch series with a link to the branch for review.
+
+Follow this procedure to push a change to an upstream "contrib" Git
+repository once the steps in
+":ref:`contributor-guide/submit-changes:preparing changes for submission`"
+have been followed:
+
+.. note::
+
+ You can find general Git information on how to push a change upstream
+ in the
+ `Git Community Book <https://git-scm.com/book/en/v2/Distributed-Git-Distributed-Workflows>`__.
+
+#. *Request Push Access to an "Upstream" Contrib Repository:* Send an email to
+ ``helpdesk@yoctoproject.org``:
+
+ - Attach your SSH public key which usually named ``id_rsa.pub.``.
+ If you don't have one generate it by running ``ssh-keygen -t rsa -b 4096 -C "your_email@example.com"``.
+
+ - List the repositories you're planning to contribute to.
+
+ - Include your preferred branch prefix for ``-contrib`` repositories.
+
+#. *Push Your Commits to the "Contrib" Upstream:* Push your
+ changes to that repository::
+
+ $ git push upstream_remote_repo local_branch_name
+
+ For example, suppose you have permissions to push
+ into the upstream ``meta-intel-contrib`` repository and you are
+ working in a local branch named `your_name`\ ``/README``. The following
+ command pushes your local commits to the ``meta-intel-contrib``
+ upstream repository and puts the commit in a branch named
+ `your_name`\ ``/README``::
+
+ $ git push meta-intel-contrib your_name/README
+
+#. *Determine Who to Notify:* Determine the maintainer or the mailing
+ list that you need to notify for the change.
+
+ Before submitting any change, you need to be sure who the maintainer
+ is or what mailing list that you need to notify. Use either these
+ methods to find out:
+
+ - *Maintenance File:* Examine the ``maintainers.inc`` file, which is
+ located in the :term:`Source Directory` at
+ ``meta/conf/distro/include``, to see who is responsible for code.
+
+ - *Search by File:* Using :ref:`overview-manual/development-environment:git`, you can
+ enter the following command to bring up a short list of all
+ commits against a specific file::
+
+ git shortlog -- filename
+
+ Just provide the name of the file for which you are interested. The
+ information returned is not ordered by history but does include a
+ list of everyone who has committed grouped by name. From the list,
+ you can see who is responsible for the bulk of the changes against
+ the file.
+
+ - *Find the Mailing List to Use:* See the
+ ":ref:`contributor-guide/submit-changes:finding a suitable mailing list`"
+ section above.
+
+#. *Make a Pull Request:* Notify the maintainer or the mailing list that
+ you have pushed a change by making a pull request.
+
+ The Yocto Project provides two scripts that conveniently let you
+ generate and send pull requests to the Yocto Project. These scripts
+ are ``create-pull-request`` and ``send-pull-request``. You can find
+ these scripts in the ``scripts`` directory within the
+ :term:`Source Directory` (e.g.
+ ``poky/scripts``).
+
+ Using these scripts correctly formats the requests without
+ introducing any whitespace or HTML formatting. The maintainer that
+ receives your patches either directly or through the mailing list
+ needs to be able to save and apply them directly from your emails.
+ Using these scripts is the preferred method for sending patches.
+
+ First, create the pull request. For example, the following command
+ runs the script, specifies the upstream repository in the contrib
+ directory into which you pushed the change, and provides a subject
+ line in the created patch files::
+
+ $ poky/scripts/create-pull-request -u meta-intel-contrib -s "Updated Manual Section Reference in README"
+
+ Running this script forms ``*.patch`` files in a folder named
+ ``pull-``\ `PID` in the current directory. One of the patch files is a
+ cover letter.
+
+ Before running the ``send-pull-request`` script, you must edit the
+ cover letter patch to insert information about your change. After
+ editing the cover letter, send the pull request. For example, the
+ following command runs the script and specifies the patch directory
+ and email address. In this example, the email address is a mailing
+ list::
+
+ $ poky/scripts/send-pull-request -p ~/meta-intel/pull-10565 -t meta-intel@lists.yoctoproject.org
+
+ You need to follow the prompts as the script is interactive.
+
+ .. note::
+
+ For help on using these scripts, simply provide the ``-h``
+ argument as follows::
+
+ $ poky/scripts/create-pull-request -h
+ $ poky/scripts/send-pull-request -h
+
+Submitting Changes to Stable Release Branches
+=============================================
+
+The process for proposing changes to a Yocto Project stable branch differs
+from the steps described above. Changes to a stable branch must address
+identified bugs or CVEs and should be made carefully in order to avoid the
+risk of introducing new bugs or breaking backwards compatibility. Typically
+bug fixes must already be accepted into the master branch before they can be
+backported to a stable branch unless the bug in question does not affect the
+master branch or the fix on the master branch is unsuitable for backporting.
+
+The list of stable branches along with the status and maintainer for each
+branch can be obtained from the
+:yocto_wiki:`Releases wiki page </Releases>`.
+
+.. note::
+
+ Changes will not typically be accepted for branches which are marked as
+ End-Of-Life (EOL).
+
+With this in mind, the steps to submit a change for a stable branch are as
+follows:
+
+#. *Identify the bug or CVE to be fixed:* This information should be
+ collected so that it can be included in your submission.
+
+ See :ref:`dev-manual/vulnerabilities:checking for vulnerabilities`
+ for details about CVE tracking.
+
+#. *Check if the fix is already present in the master branch:* This will
+ result in the most straightforward path into the stable branch for the
+ fix.
+
+ #. *If the fix is present in the master branch --- submit a backport request
+ by email:* You should send an email to the relevant stable branch
+ maintainer and the mailing list with details of the bug or CVE to be
+ fixed, the commit hash on the master branch that fixes the issue and
+ the stable branches which you would like this fix to be backported to.
+
+ #. *If the fix is not present in the master branch --- submit the fix to the
+ master branch first:* This will ensure that the fix passes through the
+ project's usual patch review and test processes before being accepted.
+ It will also ensure that bugs are not left unresolved in the master
+ branch itself. Once the fix is accepted in the master branch a backport
+ request can be submitted as above.
+
+ #. *If the fix is unsuitable for the master branch --- submit a patch
+ directly for the stable branch:* This method should be considered as a
+ last resort. It is typically necessary when the master branch is using
+ a newer version of the software which includes an upstream fix for the
+ issue or when the issue has been fixed on the master branch in a way
+ that introduces backwards incompatible changes. In this case follow the
+ steps in ":ref:`contributor-guide/submit-changes:preparing changes for submission`"
+ and in the following sections but modify the subject header of your patch
+ email to include the name of the stable branch which you are
+ targetting. This can be done using the ``--subject-prefix`` argument to
+ ``git format-patch``, for example to submit a patch to the
+ "&DISTRO_NAME_NO_CAP_MINUS_ONE;" branch use::
+
+ git format-patch --subject-prefix='&DISTRO_NAME_NO_CAP_MINUS_ONE;][PATCH' ...
+
+Taking Patch Review into Account
+================================
+
+You may get feedback on your submitted patches from other community members
+or from the automated patchtest service. If issues are identified in your
+patches then it is usually necessary to address these before the patches are
+accepted into the project. In this case you should your commits according
+to the feedback and submit an updated version to the relevant mailing list.
+
+In any case, never fix reported issues by fixing them in new commits
+on the tip of your branch. Always come up with a new series of commits
+without the reported issues.
+
+.. note::
+
+ It is a good idea to send a copy to the reviewers who provided feedback
+ to the previous version of the patch. You can make sure this happens
+ by adding a ``CC`` tag to the commit description::
+
+ CC: William Shakespeare <bill@yoctoproject.org>
+
+A single patch can be amended using ``git commit --amend``, and multiple
+patches can be easily reworked and reordered through an interactive Git rebase::
+
+ git rebase -i <ref-branch>
+
+See `this tutorial <https://hackernoon.com/beginners-guide-to-interactive-rebasing-346a3f9c3a6d>`__
+for practical guidance about using Git interactive rebasing.
+
+You should also modify the ``[PATCH]`` tag in the email subject line when
+sending the revised patch to mark the new iteration as ``[PATCH v2]``,
+``[PATCH v3]``, etc as appropriate. This can be done by passing the ``-v``
+argument to ``git format-patch`` with a version number::
+
+ git format-patch -v2 <ref-branch>
+
+Lastly please ensure that you also test your revised changes. In particular
+please don't just edit the patch file written out by ``git format-patch`` and
+resend it.
+
+Tracking the Status of Patches
+==============================
+
+The Yocto Project uses a `Patchwork instance <https://patchwork.yoctoproject.org/>`__
+to track the status of patches submitted to the various mailing lists and to
+support automated patch testing. Each submitted patch is checked for common
+mistakes and deviations from the expected patch format and submitters are
+notified by ``patchtest`` if such mistakes are found. This process helps to
+reduce the burden of patch review on maintainers.
+
+.. note::
+
+ This system is imperfect and changes can sometimes get lost in the flow.
+ Asking about the status of a patch or change is reasonable if the change
+ has been idle for a while with no feedback.
+
+If your patches have not had any feedback in a few days, they may have already
+been merged. You can run ``git pull`` branch to check this. Note that many if
+not most layer maintainers do not send out acknowledgement emails when they
+accept patches. Alternatively, if there is no response or merge after a few days
+the patch may have been missed or the appropriate reviewers may not currently be
+around. It is then perfectly fine to reply to it yourself with a reminder asking
+for feedback.
+
+.. note::
+
+ Patch reviews for feature and recipe upgrade patches are likely be delayed
+ during a feature freeze because these types of patches aren't merged during
+ at that time --- you may have to wait until after the freeze is lifted.
+
+Maintainers also commonly use ``-next`` branches to test submissions prior to
+merging patches. Thus, you can get an idea of the status of a patch based on
+whether the patch has been merged into one of these branches. The commonly
+used testing branches for OpenEmbedded-Core are as follows:
+
+- *openembedded-core "master-next" branch:* This branch is part of the
+ :oe_git:`openembedded-core </openembedded-core/>` repository and contains
+ proposed changes to the core metadata.
+
+- *poky "master-next" branch:* This branch is part of the
+ :yocto_git:`poky </poky/>` repository and combines proposed
+ changes to BitBake, the core metadata and the poky distro.
+
+Similarly, stable branches maintained by the project may have corresponding
+``-next`` branches which collect proposed changes. For example,
+``&DISTRO_NAME_NO_CAP;-next`` and ``&DISTRO_NAME_NO_CAP_MINUS_ONE;-next``
+branches in both the "openembdedded-core" and "poky" repositories.
+
+Other layers may have similar testing branches but there is no formal
+requirement or standard for these so please check the documentation for the
+layers you are contributing to.
+
diff --git a/poky/documentation/dev-manual/building.rst b/poky/documentation/dev-manual/building.rst
index 1f1642e..a395793 100644
--- a/poky/documentation/dev-manual/building.rst
+++ b/poky/documentation/dev-manual/building.rst
@@ -273,12 +273,12 @@
Follow these steps to create an :term:`Initramfs` image:
-#. *Create the :term:`Initramfs` Image Recipe:* You can reference the
+#. *Create the Initramfs Image Recipe:* You can reference the
``core-image-minimal-initramfs.bb`` recipe found in the
``meta/recipes-core`` directory of the :term:`Source Directory`
as an example from which to work.
-#. *Decide if You Need to Bundle the :term:`Initramfs` Image Into the Kernel
+#. *Decide if You Need to Bundle the Initramfs Image Into the Kernel
Image:* If you want the :term:`Initramfs` image that is built to be bundled
in with the kernel image, set the :term:`INITRAMFS_IMAGE_BUNDLE`
variable to ``"1"`` in your ``local.conf`` configuration file and set the
diff --git a/poky/documentation/dev-manual/changes.rst b/poky/documentation/dev-manual/changes.rst
deleted file mode 100644
index 9db6ce0..0000000
--- a/poky/documentation/dev-manual/changes.rst
+++ /dev/null
@@ -1,525 +0,0 @@
-.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
-
-Making Changes to the Yocto Project
-***********************************
-
-Because the Yocto Project is an open-source, community-based project,
-you can effect changes to the project. This section presents procedures
-that show you how to submit a defect against the project and how to
-submit a change.
-
-Submitting a Defect Against the Yocto Project
-=============================================
-
-Use the Yocto Project implementation of
-`Bugzilla <https://www.bugzilla.org/about/>`__ to submit a defect (bug)
-against the Yocto Project. For additional information on this
-implementation of Bugzilla see the ":ref:`Yocto Project
-Bugzilla <resources-bugtracker>`" section in the
-Yocto Project Reference Manual. For more detail on any of the following
-steps, see the Yocto Project
-:yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>`.
-
-Use the following general steps to submit a bug:
-
-#. Open the Yocto Project implementation of :yocto_bugs:`Bugzilla <>`.
-
-#. Click "File a Bug" to enter a new bug.
-
-#. Choose the appropriate "Classification", "Product", and "Component"
- for which the bug was found. Bugs for the Yocto Project fall into
- one of several classifications, which in turn break down into
- several products and components. For example, for a bug against the
- ``meta-intel`` layer, you would choose "Build System, Metadata &
- Runtime", "BSPs", and "bsps-meta-intel", respectively.
-
-#. Choose the "Version" of the Yocto Project for which you found the
- bug (e.g. &DISTRO;).
-
-#. Determine and select the "Severity" of the bug. The severity
- indicates how the bug impacted your work.
-
-#. Choose the "Hardware" that the bug impacts.
-
-#. Choose the "Architecture" that the bug impacts.
-
-#. Choose a "Documentation change" item for the bug. Fixing a bug might
- or might not affect the Yocto Project documentation. If you are
- unsure of the impact to the documentation, select "Don't Know".
-
-#. Provide a brief "Summary" of the bug. Try to limit your summary to
- just a line or two and be sure to capture the essence of the bug.
-
-#. Provide a detailed "Description" of the bug. You should provide as
- much detail as you can about the context, behavior, output, and so
- forth that surrounds the bug. You can even attach supporting files
- for output from logs by using the "Add an attachment" button.
-
-#. Click the "Submit Bug" button submit the bug. A new Bugzilla number
- is assigned to the bug and the defect is logged in the bug tracking
- system.
-
-Once you file a bug, the bug is processed by the Yocto Project Bug
-Triage Team and further details concerning the bug are assigned (e.g.
-priority and owner). You are the "Submitter" of the bug and any further
-categorization, progress, or comments on the bug result in Bugzilla
-sending you an automated email concerning the particular change or
-progress to the bug.
-
-Submitting a Change to the Yocto Project
-========================================
-
-Contributions to the Yocto Project and OpenEmbedded are very welcome.
-Because the system is extremely configurable and flexible, we recognize
-that developers will want to extend, configure or optimize it for their
-specific uses.
-
-The Yocto Project uses a mailing list and a patch-based workflow that is
-similar to the Linux kernel but contains important differences. In
-general, there is a mailing list through which you can submit patches. You
-should send patches to the appropriate mailing list so that they can be
-reviewed and merged by the appropriate maintainer. The specific mailing
-list you need to use depends on the location of the code you are
-changing. Each component (e.g. layer) should have a ``README`` file that
-indicates where to send the changes and which process to follow.
-
-You can send the patch to the mailing list using whichever approach you
-feel comfortable with to generate the patch. Once sent, the patch is
-usually reviewed by the community at large. If somebody has concerns
-with the patch, they will usually voice their concern over the mailing
-list. If a patch does not receive any negative reviews, the maintainer
-of the affected layer typically takes the patch, tests it, and then
-based on successful testing, merges the patch.
-
-The "poky" repository, which is the Yocto Project's reference build
-environment, is a hybrid repository that contains several individual
-pieces (e.g. BitBake, Metadata, documentation, and so forth) built using
-the combo-layer tool. The upstream location used for submitting changes
-varies by component:
-
-- *Core Metadata:* Send your patch to the
- :oe_lists:`openembedded-core </g/openembedded-core>`
- mailing list. For example, a change to anything under the ``meta`` or
- ``scripts`` directories should be sent to this mailing list.
-
-- *BitBake:* For changes to BitBake (i.e. anything under the
- ``bitbake`` directory), send your patch to the
- :oe_lists:`bitbake-devel </g/bitbake-devel>`
- mailing list.
-
-- *"meta-\*" trees:* These trees contain Metadata. Use the
- :yocto_lists:`poky </g/poky>` mailing list.
-
-- *Documentation*: For changes to the Yocto Project documentation, use the
- :yocto_lists:`docs </g/docs>` mailing list.
-
-For changes to other layers hosted in the Yocto Project source
-repositories (i.e. ``yoctoproject.org``) and tools use the
-:yocto_lists:`Yocto Project </g/yocto/>` general mailing list.
-
-.. note::
-
- Sometimes a layer's documentation specifies to use a particular
- mailing list. If so, use that list.
-
-For additional recipes that do not fit into the core Metadata, you
-should determine which layer the recipe should go into and submit the
-change in the manner recommended by the documentation (e.g. the
-``README`` file) supplied with the layer. If in doubt, please ask on the
-Yocto general mailing list or on the openembedded-devel mailing list.
-
-You can also push a change upstream and request a maintainer to pull the
-change into the component's upstream repository. You do this by pushing
-to a contribution repository that is upstream. See the
-":ref:`overview-manual/development-environment:git workflows and the yocto project`"
-section in the Yocto Project Overview and Concepts Manual for additional
-concepts on working in the Yocto Project development environment.
-
-Maintainers commonly use ``-next`` branches to test submissions prior to
-merging patches. Thus, you can get an idea of the status of a patch based on
-whether the patch has been merged into one of these branches. The commonly
-used testing branches for OpenEmbedded-Core are as follows:
-
-- *openembedded-core "master-next" branch:* This branch is part of the
- :oe_git:`openembedded-core </openembedded-core/>` repository and contains
- proposed changes to the core metadata.
-
-- *poky "master-next" branch:* This branch is part of the
- :yocto_git:`poky </poky/>` repository and combines proposed
- changes to BitBake, the core metadata and the poky distro.
-
-Similarly, stable branches maintained by the project may have corresponding
-``-next`` branches which collect proposed changes. For example,
-``&DISTRO_NAME_NO_CAP;-next`` and ``&DISTRO_NAME_NO_CAP_MINUS_ONE;-next``
-branches in both the "openembdedded-core" and "poky" repositories.
-
-Other layers may have similar testing branches but there is no formal
-requirement or standard for these so please check the documentation for the
-layers you are contributing to.
-
-The following sections provide procedures for submitting a change.
-
-Preparing Changes for Submission
---------------------------------
-
-#. *Make Your Changes Locally:* Make your changes in your local Git
- repository. You should make small, controlled, isolated changes.
- Keeping changes small and isolated aids review, makes
- merging/rebasing easier and keeps the change history clean should
- anyone need to refer to it in future.
-
-#. *Stage Your Changes:* Stage your changes by using the ``git add``
- command on each file you changed.
-
-#. *Commit Your Changes:* Commit the change by using the ``git commit``
- command. Make sure your commit information follows standards by
- following these accepted conventions:
-
- - Be sure to include a "Signed-off-by:" line in the same style as
- required by the Linux kernel. This can be done by using the
- ``git commit -s`` command. Adding this line signifies that you,
- the submitter, have agreed to the Developer's Certificate of
- Origin 1.1 as follows:
-
- .. code-block:: none
-
- Developer's Certificate of Origin 1.1
-
- By making a contribution to this project, I certify that:
-
- (a) The contribution was created in whole or in part by me and I
- have the right to submit it under the open source license
- indicated in the file; or
-
- (b) The contribution is based upon previous work that, to the best
- of my knowledge, is covered under an appropriate open source
- license and I have the right under that license to submit that
- work with modifications, whether created in whole or in part
- by me, under the same open source license (unless I am
- permitted to submit under a different license), as indicated
- in the file; or
-
- (c) The contribution was provided directly to me by some other
- person who certified (a), (b) or (c) and I have not modified
- it.
-
- (d) I understand and agree that this project and the contribution
- are public and that a record of the contribution (including all
- personal information I submit with it, including my sign-off) is
- maintained indefinitely and may be redistributed consistent with
- this project or the open source license(s) involved.
-
- - Provide a single-line summary of the change and, if more
- explanation is needed, provide more detail in the body of the
- commit. This summary is typically viewable in the "shortlist" of
- changes. Thus, providing something short and descriptive that
- gives the reader a summary of the change is useful when viewing a
- list of many commits. You should prefix this short description
- with the recipe name (if changing a recipe), or else with the
- short form path to the file being changed.
-
- - For the body of the commit message, provide detailed information
- that describes what you changed, why you made the change, and the
- approach you used. It might also be helpful if you mention how you
- tested the change. Provide as much detail as you can in the body
- of the commit message.
-
- .. note::
-
- You do not need to provide a more detailed explanation of a
- change if the change is minor to the point of the single line
- summary providing all the information.
-
- - If the change addresses a specific bug or issue that is associated
- with a bug-tracking ID, include a reference to that ID in your
- detailed description. For example, the Yocto Project uses a
- specific convention for bug references --- any commit that addresses
- a specific bug should use the following form for the detailed
- description. Be sure to use the actual bug-tracking ID from
- Bugzilla for bug-id::
-
- Fixes [YOCTO #bug-id]
-
- detailed description of change
-
-Using Email to Submit a Patch
------------------------------
-
-Depending on the components changed, you need to submit the email to a
-specific mailing list. For some guidance on which mailing list to use,
-see the
-:ref:`list <dev-manual/changes:submitting a change to the yocto project>`
-at the beginning of this section. For a description of all the available
-mailing lists, see the ":ref:`Mailing Lists <resources-mailinglist>`" section in the
-Yocto Project Reference Manual.
-
-Here is the general procedure on how to submit a patch through email
-without using the scripts once the steps in
-:ref:`dev-manual/changes:preparing changes for submission` have been followed:
-
-#. *Format the Commit:* Format the commit into an email message. To
- format commits, use the ``git format-patch`` command. When you
- provide the command, you must include a revision list or a number of
- patches as part of the command. For example, either of these two
- commands takes your most recent single commit and formats it as an
- email message in the current directory::
-
- $ git format-patch -1
-
- or ::
-
- $ git format-patch HEAD~
-
- After the command is run, the current directory contains a numbered
- ``.patch`` file for the commit.
-
- If you provide several commits as part of the command, the
- ``git format-patch`` command produces a series of numbered files in
- the current directory – one for each commit. If you have more than
- one patch, you should also use the ``--cover`` option with the
- command, which generates a cover letter as the first "patch" in the
- series. You can then edit the cover letter to provide a description
- for the series of patches. For information on the
- ``git format-patch`` command, see ``GIT_FORMAT_PATCH(1)`` displayed
- using the ``man git-format-patch`` command.
-
- .. note::
-
- If you are or will be a frequent contributor to the Yocto Project
- or to OpenEmbedded, you might consider requesting a contrib area
- and the necessary associated rights.
-
-#. *Send the patches via email:* Send the patches to the recipients and
- relevant mailing lists by using the ``git send-email`` command.
-
- .. note::
-
- In order to use ``git send-email``, you must have the proper Git packages
- installed on your host.
- For Ubuntu, Debian, and Fedora the package is ``git-email``.
-
- The ``git send-email`` command sends email by using a local or remote
- Mail Transport Agent (MTA) such as ``msmtp``, ``sendmail``, or
- through a direct ``smtp`` configuration in your Git ``~/.gitconfig``
- file. If you are submitting patches through email only, it is very
- important that you submit them without any whitespace or HTML
- formatting that either you or your mailer introduces. The maintainer
- that receives your patches needs to be able to save and apply them
- directly from your emails. A good way to verify that what you are
- sending will be applicable by the maintainer is to do a dry run and
- send them to yourself and then save and apply them as the maintainer
- would.
-
- The ``git send-email`` command is the preferred method for sending
- your patches using email since there is no risk of compromising
- whitespace in the body of the message, which can occur when you use
- your own mail client. The command also has several options that let
- you specify recipients and perform further editing of the email
- message. For information on how to use the ``git send-email``
- command, see ``GIT-SEND-EMAIL(1)`` displayed using the
- ``man git-send-email`` command.
-
-The Yocto Project uses a `Patchwork instance <https://patchwork.yoctoproject.org/>`__
-to track the status of patches submitted to the various mailing lists and to
-support automated patch testing. Each submitted patch is checked for common
-mistakes and deviations from the expected patch format and submitters are
-notified by patchtest if such mistakes are found. This process helps to
-reduce the burden of patch review on maintainers.
-
-.. note::
-
- This system is imperfect and changes can sometimes get lost in the flow.
- Asking about the status of a patch or change is reasonable if the change
- has been idle for a while with no feedback.
-
-Using Scripts to Push a Change Upstream and Request a Pull
-----------------------------------------------------------
-
-For larger patch series it is preferable to send a pull request which not
-only includes the patch but also a pointer to a branch that can be pulled
-from. This involves making a local branch for your changes, pushing this
-branch to an accessible repository and then using the ``create-pull-request``
-and ``send-pull-request`` scripts from openembedded-core to create and send a
-patch series with a link to the branch for review.
-
-Follow this procedure to push a change to an upstream "contrib" Git
-repository once the steps in :ref:`dev-manual/changes:preparing changes for submission` have
-been followed:
-
-.. note::
-
- You can find general Git information on how to push a change upstream
- in the
- `Git Community Book <https://git-scm.com/book/en/v2/Distributed-Git-Distributed-Workflows>`__.
-
-#. *Push Your Commits to a "Contrib" Upstream:* If you have arranged for
- permissions to push to an upstream contrib repository, push the
- change to that repository::
-
- $ git push upstream_remote_repo local_branch_name
-
- For example, suppose you have permissions to push
- into the upstream ``meta-intel-contrib`` repository and you are
- working in a local branch named `your_name`\ ``/README``. The following
- command pushes your local commits to the ``meta-intel-contrib``
- upstream repository and puts the commit in a branch named
- `your_name`\ ``/README``::
-
- $ git push meta-intel-contrib your_name/README
-
-#. *Determine Who to Notify:* Determine the maintainer or the mailing
- list that you need to notify for the change.
-
- Before submitting any change, you need to be sure who the maintainer
- is or what mailing list that you need to notify. Use either these
- methods to find out:
-
- - *Maintenance File:* Examine the ``maintainers.inc`` file, which is
- located in the :term:`Source Directory` at
- ``meta/conf/distro/include``, to see who is responsible for code.
-
- - *Search by File:* Using :ref:`overview-manual/development-environment:git`, you can
- enter the following command to bring up a short list of all
- commits against a specific file::
-
- git shortlog -- filename
-
- Just provide the name of the file for which you are interested. The
- information returned is not ordered by history but does include a
- list of everyone who has committed grouped by name. From the list,
- you can see who is responsible for the bulk of the changes against
- the file.
-
- - *Examine the List of Mailing Lists:* For a list of the Yocto
- Project and related mailing lists, see the ":ref:`Mailing
- lists <resources-mailinglist>`" section in
- the Yocto Project Reference Manual.
-
-#. *Make a Pull Request:* Notify the maintainer or the mailing list that
- you have pushed a change by making a pull request.
-
- The Yocto Project provides two scripts that conveniently let you
- generate and send pull requests to the Yocto Project. These scripts
- are ``create-pull-request`` and ``send-pull-request``. You can find
- these scripts in the ``scripts`` directory within the
- :term:`Source Directory` (e.g.
- ``poky/scripts``).
-
- Using these scripts correctly formats the requests without
- introducing any whitespace or HTML formatting. The maintainer that
- receives your patches either directly or through the mailing list
- needs to be able to save and apply them directly from your emails.
- Using these scripts is the preferred method for sending patches.
-
- First, create the pull request. For example, the following command
- runs the script, specifies the upstream repository in the contrib
- directory into which you pushed the change, and provides a subject
- line in the created patch files::
-
- $ poky/scripts/create-pull-request -u meta-intel-contrib -s "Updated Manual Section Reference in README"
-
- Running this script forms ``*.patch`` files in a folder named
- ``pull-``\ `PID` in the current directory. One of the patch files is a
- cover letter.
-
- Before running the ``send-pull-request`` script, you must edit the
- cover letter patch to insert information about your change. After
- editing the cover letter, send the pull request. For example, the
- following command runs the script and specifies the patch directory
- and email address. In this example, the email address is a mailing
- list::
-
- $ poky/scripts/send-pull-request -p ~/meta-intel/pull-10565 -t meta-intel@lists.yoctoproject.org
-
- You need to follow the prompts as the script is interactive.
-
- .. note::
-
- For help on using these scripts, simply provide the ``-h``
- argument as follows::
-
- $ poky/scripts/create-pull-request -h
- $ poky/scripts/send-pull-request -h
-
-Responding to Patch Review
---------------------------
-
-You may get feedback on your submitted patches from other community members
-or from the automated patchtest service. If issues are identified in your
-patch then it is usually necessary to address these before the patch will be
-accepted into the project. In this case you should amend the patch according
-to the feedback and submit an updated version to the relevant mailing list,
-copying in the reviewers who provided feedback to the previous version of the
-patch.
-
-The patch should be amended using ``git commit --amend`` or perhaps ``git
-rebase`` for more expert git users. You should also modify the ``[PATCH]``
-tag in the email subject line when sending the revised patch to mark the new
-iteration as ``[PATCH v2]``, ``[PATCH v3]``, etc as appropriate. This can be
-done by passing the ``-v`` argument to ``git format-patch`` with a version
-number.
-
-Lastly please ensure that you also test your revised changes. In particular
-please don't just edit the patch file written out by ``git format-patch`` and
-resend it.
-
-Submitting Changes to Stable Release Branches
----------------------------------------------
-
-The process for proposing changes to a Yocto Project stable branch differs
-from the steps described above. Changes to a stable branch must address
-identified bugs or CVEs and should be made carefully in order to avoid the
-risk of introducing new bugs or breaking backwards compatibility. Typically
-bug fixes must already be accepted into the master branch before they can be
-backported to a stable branch unless the bug in question does not affect the
-master branch or the fix on the master branch is unsuitable for backporting.
-
-The list of stable branches along with the status and maintainer for each
-branch can be obtained from the
-:yocto_wiki:`Releases wiki page </Releases>`.
-
-.. note::
-
- Changes will not typically be accepted for branches which are marked as
- End-Of-Life (EOL).
-
-With this in mind, the steps to submit a change for a stable branch are as
-follows:
-
-#. *Identify the bug or CVE to be fixed:* This information should be
- collected so that it can be included in your submission.
-
- See :ref:`dev-manual/vulnerabilities:checking for vulnerabilities`
- for details about CVE tracking.
-
-#. *Check if the fix is already present in the master branch:* This will
- result in the most straightforward path into the stable branch for the
- fix.
-
- #. *If the fix is present in the master branch --- submit a backport request
- by email:* You should send an email to the relevant stable branch
- maintainer and the mailing list with details of the bug or CVE to be
- fixed, the commit hash on the master branch that fixes the issue and
- the stable branches which you would like this fix to be backported to.
-
- #. *If the fix is not present in the master branch --- submit the fix to the
- master branch first:* This will ensure that the fix passes through the
- project's usual patch review and test processes before being accepted.
- It will also ensure that bugs are not left unresolved in the master
- branch itself. Once the fix is accepted in the master branch a backport
- request can be submitted as above.
-
- #. *If the fix is unsuitable for the master branch --- submit a patch
- directly for the stable branch:* This method should be considered as a
- last resort. It is typically necessary when the master branch is using
- a newer version of the software which includes an upstream fix for the
- issue or when the issue has been fixed on the master branch in a way
- that introduces backwards incompatible changes. In this case follow the
- steps in :ref:`dev-manual/changes:preparing changes for submission` and
- :ref:`dev-manual/changes:using email to submit a patch` but modify the subject header of your patch
- email to include the name of the stable branch which you are
- targetting. This can be done using the ``--subject-prefix`` argument to
- ``git format-patch``, for example to submit a patch to the dunfell
- branch use
- ``git format-patch --subject-prefix='&DISTRO_NAME_NO_CAP_MINUS_ONE;][PATCH' ...``.
-
diff --git a/poky/documentation/dev-manual/debugging.rst b/poky/documentation/dev-manual/debugging.rst
index 3c5609c..fea2cb3 100644
--- a/poky/documentation/dev-manual/debugging.rst
+++ b/poky/documentation/dev-manual/debugging.rst
@@ -879,8 +879,7 @@
As with all solved problems, if they originated upstream, you need to
submit the fix for the recipe in OE-Core and upstream so that the
problem is taken care of at its source. See the
-":ref:`dev-manual/changes:submitting a change to the yocto project`"
-section for more information.
+":doc:`../contributor-guide/submit-changes`" section for more information.
Debugging With the GNU Project Debugger (GDB) Remotely
======================================================
@@ -1236,9 +1235,7 @@
:yocto_bugs:`Bugzilla <>`. For information on
how to submit a bug against the Yocto Project, see the Yocto Project
Bugzilla :yocto_wiki:`wiki page </Bugzilla_Configuration_and_Bug_Tracking>`
- and the
- ":ref:`dev-manual/changes:submitting a defect against the yocto project`"
- section.
+ and the ":doc:`../contributor-guide/report-defect`" section.
.. note::
diff --git a/poky/documentation/dev-manual/disk-space.rst b/poky/documentation/dev-manual/disk-space.rst
index c63591c..a84bef4 100644
--- a/poky/documentation/dev-manual/disk-space.rst
+++ b/poky/documentation/dev-manual/disk-space.rst
@@ -27,19 +27,35 @@
==========================================
After multiple build iterations, the Shared State (sstate) cache can contain
-duplicate cache files for a given package, while only the most recent one
-is likely to be reusable. The following command purges all but the
-newest sstate cache file for each package::
+duplicate cache files for a given package, consuming a substantial amount of
+disk space. However, only the most recent cache files are likeky to be reusable.
+
+The following command is a quick way to purge all the cache files which
+haven't been used for a least a specified number of days::
+
+ find build/sstate-cache -type f -mtime +$DAYS -delete
+
+The above command relies on the fact that BitBake touches the sstate cache
+files as it accesses them, when it has write access to the cache.
+
+You could use ``-atime`` instead of ``-mtime`` if the partition isn't mounted
+with the ``noatime`` option for a read only cache.
+
+For more advanced needs, OpenEmbedded-Core also offers a more elaborate
+command. It has the ability to purge all but the newest cache files on each
+architecture, and also to remove files that it considers unreachable by
+exploring a set of build configurations. However, this command
+requires a full build environment to be available and doesn't work well
+covering multiple releases. It won't work either on limited environments
+such as BSD based NAS::
sstate-cache-management.sh --remove-duplicated --cache-dir=build/sstate-cache
This command will ask you to confirm the deletions it identifies.
+Run ``sstate-cache-management.sh`` for more details about this script.
.. note::
- The duplicated sstate cache files of one package must have the same
- architecture, which means that sstate cache files with multiple
- architectures are not considered as duplicate.
-
-Run ``sstate-cache-management.sh`` for more details about this script.
-
+ As this command is much more cautious and selective, removing only cache files,
+ it will execute much slower than the simple ``find`` command described above.
+ Therefore, it may not be your best option to trim huge cache directories.
diff --git a/poky/documentation/dev-manual/index.rst b/poky/documentation/dev-manual/index.rst
index b0bb557..3106b90 100644
--- a/poky/documentation/dev-manual/index.rst
+++ b/poky/documentation/dev-manual/index.rst
@@ -4,8 +4,6 @@
Yocto Project Development Tasks Manual
======================================
-|
-
.. toctree::
:caption: Table of Contents
:numbered:
@@ -43,7 +41,6 @@
build-quality
runtime-testing
debugging
- changes
licenses
vulnerabilities
sbom
diff --git a/poky/documentation/dev-manual/new-recipe.rst b/poky/documentation/dev-manual/new-recipe.rst
index af39077..cb9533f 100644
--- a/poky/documentation/dev-manual/new-recipe.rst
+++ b/poky/documentation/dev-manual/new-recipe.rst
@@ -432,56 +432,10 @@
Licensing
=========
-Your recipe needs to have both the
-:term:`LICENSE` and
-:term:`LIC_FILES_CHKSUM`
-variables:
-
-- :term:`LICENSE`: This variable specifies the license for the software.
- If you do not know the license under which the software you are
- building is distributed, you should go to the source code and look
- for that information. Typical files containing this information
- include ``COPYING``, :term:`LICENSE`, and ``README`` files. You could
- also find the information near the top of a source file. For example,
- given a piece of software licensed under the GNU General Public
- License version 2, you would set :term:`LICENSE` as follows::
-
- LICENSE = "GPL-2.0-only"
-
- The licenses you specify within :term:`LICENSE` can have any name as long
- as you do not use spaces, since spaces are used as separators between
- license names. For standard licenses, use the names of the files in
- ``meta/files/common-licenses/`` or the :term:`SPDXLICENSEMAP` flag names
- defined in ``meta/conf/licenses.conf``.
-
-- :term:`LIC_FILES_CHKSUM`: The OpenEmbedded build system uses this
- variable to make sure the license text has not changed. If it has,
- the build produces an error and it affords you the chance to figure
- it out and correct the problem.
-
- You need to specify all applicable licensing files for the software.
- At the end of the configuration step, the build process will compare
- the checksums of the files to be sure the text has not changed. Any
- differences result in an error with the message containing the
- current checksum. For more explanation and examples of how to set the
- :term:`LIC_FILES_CHKSUM` variable, see the
- ":ref:`dev-manual/licenses:tracking license changes`" section.
-
- To determine the correct checksum string, you can list the
- appropriate files in the :term:`LIC_FILES_CHKSUM` variable with incorrect
- md5 strings, attempt to build the software, and then note the
- resulting error messages that will report the correct md5 strings.
- See the ":ref:`dev-manual/new-recipe:fetching code`" section for
- additional information.
-
- Here is an example that assumes the software has a ``COPYING`` file::
-
- LIC_FILES_CHKSUM = "file://COPYING;md5=xxx"
-
- When you try to build the
- software, the build system will produce an error and give you the
- correct string that you can substitute into the recipe file for a
- subsequent build.
+Your recipe needs to define variables related to the license
+under whith the software is distributed. See the
+:ref:`contributor-guide/recipe-style-guide:recipe license fields`
+section in the Contributor Guide for details.
Dependencies
============
diff --git a/poky/documentation/dev-manual/start.rst b/poky/documentation/dev-manual/start.rst
index 4881481..88afa27 100644
--- a/poky/documentation/dev-manual/start.rst
+++ b/poky/documentation/dev-manual/start.rst
@@ -246,14 +246,13 @@
- The Yocto Project community encourages you to send patches to the
project to fix bugs or add features. If you do submit patches,
follow the project commit guidelines for writing good commit
- messages. See the
- ":ref:`dev-manual/changes:submitting a change to the yocto project`"
- section.
+ messages. See the ":doc:`../contributor-guide/submit-changes`"
+ section in the Yocto Project and OpenEmbedded Contributor Guide.
- Send changes to the core sooner than later as others are likely
to run into the same issues. For some guidance on mailing lists
- to use, see the list in the
- ":ref:`dev-manual/changes:submitting a change to the yocto project`"
+ to use, see the lists in the
+ ":ref:`contributor-guide/submit-changes:finding a suitable mailing list`"
section. For a description
of the available mailing lists, see the ":ref:`resources-mailinglist`" section in
the Yocto Project Reference Manual.
diff --git a/poky/documentation/dev-manual/vulnerabilities.rst b/poky/documentation/dev-manual/vulnerabilities.rst
index 6d87d02..71111bb 100644
--- a/poky/documentation/dev-manual/vulnerabilities.rst
+++ b/poky/documentation/dev-manual/vulnerabilities.rst
@@ -22,7 +22,7 @@
contributors and anyone interested in the issues to investigate and possibly fix them by
updating software components to newer versions or by applying patches to address them.
It is recommended to work with Poky and OE-Core upstream maintainers and submit
-patches to fix them, see ":ref:`dev-manual/changes:submitting a change to the yocto project`" for details.
+patches to fix them, see ":doc:`../contributor-guide/submit-changes`" for details.
Vulnerability check at build time
=================================
diff --git a/poky/documentation/dev-manual/wic.rst b/poky/documentation/dev-manual/wic.rst
index 2a4408c..664f07a 100644
--- a/poky/documentation/dev-manual/wic.rst
+++ b/poky/documentation/dev-manual/wic.rst
@@ -92,7 +92,7 @@
- You must build several native tools, which are built to run on the
build system::
- $ bitbake parted-native dosfstools-native mtools-native
+ $ bitbake wic-tools
- Include "wic" as part of the
:term:`IMAGE_FSTYPES`
diff --git a/poky/documentation/index.rst b/poky/documentation/index.rst
index 6335c70..3fef170 100644
--- a/poky/documentation/index.rst
+++ b/poky/documentation/index.rst
@@ -26,6 +26,7 @@
:caption: Manuals
Overview and Concepts Manual <overview-manual/index>
+ Contributor Guide <contributor-guide/index>
Reference Manual <ref-manual/index>
Board Support Package (BSP) Developer's guide <bsp-guide/index>
Development Tasks Manual <dev-manual/index>
diff --git a/poky/documentation/migration-guides/migration-2.6.rst b/poky/documentation/migration-guides/migration-2.6.rst
index dd21eb3..ecb559d 100644
--- a/poky/documentation/migration-guides/migration-2.6.rst
+++ b/poky/documentation/migration-guides/migration-2.6.rst
@@ -277,13 +277,13 @@
See the ":ref:`bitbake-user-manual/bitbake-user-manual-metadata:removal (override style syntax)`"
section in the BitBake User Manual for a detailed example.
-.. _migration-2.6-systemd-configuration-now-split-out-to-system-conf:
+.. _migration-2.6-systemd-configuration-now-split-out-to-systemd-conf:
``systemd`` Configuration is Now Split Into ``systemd-conf``
------------------------------------------------------------
The configuration for the ``systemd`` recipe has been moved into a
-``system-conf`` recipe. Moving this configuration to a separate recipe
+``systemd-conf`` recipe. Moving this configuration to a separate recipe
avoids the ``systemd`` recipe from becoming machine-specific for cases
where machine-specific configurations need to be applied (e.g. for
``qemu*`` machines).
diff --git a/poky/documentation/migration-guides/release-4.0.rst b/poky/documentation/migration-guides/release-4.0.rst
index 1f08c88..688ea7a 100644
--- a/poky/documentation/migration-guides/release-4.0.rst
+++ b/poky/documentation/migration-guides/release-4.0.rst
@@ -18,3 +18,4 @@
release-notes-4.0.9
release-notes-4.0.10
release-notes-4.0.11
+ release-notes-4.0.12
diff --git a/poky/documentation/migration-guides/release-4.2.rst b/poky/documentation/migration-guides/release-4.2.rst
index 981600a..abeebcb 100644
--- a/poky/documentation/migration-guides/release-4.2.rst
+++ b/poky/documentation/migration-guides/release-4.2.rst
@@ -9,3 +9,4 @@
release-notes-4.2
release-notes-4.2.1
release-notes-4.2.2
+ release-notes-4.2.3
diff --git a/poky/documentation/migration-guides/release-notes-4.0.12.rst b/poky/documentation/migration-guides/release-notes-4.0.12.rst
new file mode 100644
index 0000000..0ea92a4
--- /dev/null
+++ b/poky/documentation/migration-guides/release-notes-4.0.12.rst
@@ -0,0 +1,277 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Release notes for Yocto-4.0.12 (Kirkstone)
+------------------------------------------
+
+Security Fixes in Yocto-4.0.12
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- bind: Fix :cve:`2023-2828` and :cve:`2023-2911`
+- cups: Fix :cve:`2023-34241`
+- curl: Added :cve:`2023-28320` Follow-up patch
+- dbus: Fix :cve:`2023-34969`
+- dmidecode: fix :cve:`2023-30630`
+- ghostscript: fix :cve:`2023-36664`
+- go: fix :cve_mitre:`2023-24531`, :cve:`2023-24536`, :cve:`2023-29400`, :cve:`2023-29402`, :cve:`2023-29404`, :cve:`2023-29405` and :cve:`2023-29406`
+- libarchive: Ignore :cve:`2023-30571`
+- libcap: Fix :cve:`2023-2602` and :cve:`2023-2603`
+- libjpeg-turbo: Fix :cve:`2023-2804`
+- libpcre2: Fix :cve:`2022-41409`
+- libtiff: fix :cve:`2023-26965`
+- libwebp: Fix :cve:`2023-1999`
+- libx11: Fix :cve:`2023-3138`
+- libxpm: Fix :cve:`2022-44617`
+- ninja: Ignore :cve:`2021-4336`
+- openssh: Fix :cve:`2023-38408`
+- openssl: Fix :cve:`2023-2975`, :cve:`2023-3446` and :cve:`2023-3817`
+- perl: Fix :cve:`2023-31486`
+- python3: Ignore :cve:`2023-36632`
+- qemu: Fix :cve:`2023-0330`, :cve_mitre:`2023-2861`, :cve_mitre:`2023-3255` and :cve_mitre:`2023-3301`
+- sqlite3: Fix :cve:`2023-36191`
+- tiff: Fix :cve:`2023-0795`, :cve:`2023-0796`, :cve:`2023-0797`, :cve:`2023-0798`, :cve:`2023-0799`, :cve:`2023-25433`, :cve:`2023-25434` and :cve:`2023-25435`
+- vim: :cve:`2023-2609` and :cve:`2023-2610`
+
+
+Fixes in Yocto-4.0.12
+~~~~~~~~~~~~~~~~~~~~~
+
+- babeltrace2: Always use BFD linker when building tests with ld-is-lld distro feature
+- babeltrace2: upgrade to 2.0.5
+- bitbake.conf: add unzstd in :term:`HOSTTOOLS`
+- bitbake: bitbake-layers: initialize tinfoil before registering command line arguments
+- bitbake: runqueue: Fix deferred task/multiconfig race issue
+- blktrace: ask for python3 specifically
+- build-appliance-image: Update to kirkstone head revision
+- cmake: Fix CMAKE_SYSTEM_PROCESSOR setting for SDK
+- connman: fix warning by specifying runstatedir at configure time
+- cpio: Replace fix wrong CRC with ASCII CRC for large files with upstream backport
+- cve-update-nvd2-native: actually use API keys
+- cve-update-nvd2-native: always pass str for json.loads()
+- cve-update-nvd2-native: fix cvssV3 metrics
+- cve-update-nvd2-native: handle all configuration nodes, not just first
+- cve-update-nvd2-native: increase retry count
+- cve-update-nvd2-native: log a little more
+- cve-update-nvd2-native: retry all errors and sleep between retries
+- cve-update-nvd2-native: use exact times, don't truncate
+- dbus: upgrade to 1.14.8
+- devtool: Fix the wrong variable in srcuri_entry
+- diffutils: upgrade to 3.10
+- docs: ref-manual: terms: fix typos in :term:`SPDX` term
+- fribidi: upgrade to 1.0.13
+- gcc: upgrade to v11.4
+- gcc-testsuite: Fix ppc cpu specification
+- gcc: don't pass --enable-standard-branch-protection
+- gcc: fix runpath errors in cc1 binary
+- grub: submit determinism.patch upstream
+- image_types: Fix reproducible builds for initramfs and UKI img
+- kernel: add missing path to search for debug files
+- kmod: remove unused ptest.patch
+- layer.conf: Add missing dependency exclusion
+- libassuan: upgrade to 2.5.6
+- libksba: upgrade to 1.6.4
+- libpng: Add ptest for libpng
+- libxcrypt: fix build with perl-5.38 and use master branch
+- libxcrypt: fix hard-coded ".so" extension
+- libxpm: upgrade to 3.5.16
+- linux-firmware: upgrade to 20230515
+- linux-yocto/5.10: cfg: fix DECNET configuration warning
+- linux-yocto/5.10: update to v5.10.185
+- linux-yocto/5.15: cfg: fix DECNET configuration warning
+- linux-yocto/5.15: update to v5.15.120
+- logrotate: Do not create logrotate.status file
+- lttng-ust: upgrade to 2.13.6
+- machine/arch-arm64: add -mbranch-protection=standard
+- maintainers.inc: correct Carlos Rafael Giani's email address
+- maintainers.inc: correct unassigned entries
+- maintainers.inc: unassign Adrian Bunk from wireless-regdb
+- maintainers.inc: unassign Alistair Francis from opensbi
+- maintainers.inc: unassign Andreas Müller from itstool entry
+- maintainers.inc: unassign Pascal Bach from cmake entry
+- maintainers.inc: unassign Ricardo Neri from ovmf
+- maintainers.inc: unassign Richard Weinberger from erofs-utils entry
+- mdadm: fix 07revert-inplace ptest
+- mdadm: fix segfaults when running ptests
+- mdadm: fix util-linux ptest dependency
+- mdadm: skip running known broken ptests
+- meson.bbclass: Point to llvm-config from native sysroot
+- meta: lib: oe: npm_registry: Add more safe caracters
+- migration-guides: add release notes for 4.0.11
+- minicom: remove unused patch files
+- mobile-broadband-provider-info: upgrade to 20230416
+- oe-depends-dot: Handle new format for task-depends.dot
+- oeqa/runtime/cases/rpm: fix wait_for_no_process_for_user failure case
+- oeqa/selftest/bbtests: add non-existent prefile/postfile tests
+- oeqa/selftest/devtool: add unit test for "devtool add -b"
+- openssl: Upgrade to 3.0.10
+- openssl: add PERLEXTERNAL path to test its existence
+- openssl: use a glob on the PERLEXTERNAL to track updates on the path
+- package.bbclass: moving field data process before variable process in process_pkgconfig
+- pm-utils: fix multilib conflictions
+- poky.conf: bump version for 4.0.12
+- psmisc: Set :term:`ALTERNATIVE` for pstree to resolve conflict with busybox
+- pybootchartgui: show elapsed time for each task
+- python3: fix missing comma in get_module_deps3.py
+- python3: upgrade to 3.10.12
+- recipetool: Fix inherit in created -native* recipes
+- ref-manual: add LTS and Mixin terms
+- ref-manual: document image-specific variant of :term:`INCOMPATIBLE_LICENSE`
+- ref-manual: release-process: update for LTS releases
+- rust-llvm: backport a fix for build with gcc-13
+- scripts/runqemu: allocate unfsd ports in a way that doesn't race or clash with unrelated processes
+- scripts/runqemu: split lock dir creation into a reusable function
+- sdk.py: error out when moving file fails
+- sdk.py: fix moving dnf contents
+- selftest reproducible.py: support different build targets
+- selftest/license: Exclude from world
+- selftest/reproducible: Allow chose the package manager
+- serf: upgrade to 1.3.10
+- strace: Disable failing test
+- strace: Merge two similar patches
+- strace: Update patches/tests with upstream fixes
+- sysfsutils: fetch a supported fork from github
+- systemd-systemctl: fix errors in instance name expansion
+- systemd: Backport nspawn: make sure host root can write to the uidmapped mounts we prepare for the container payload
+- tzdata: upgrade to 2023c
+- uboot-extlinux-config.bbclass: fix old override syntax in comment
+- unzip: fix configure check for cross compilation
+- useradd-staticids.bbclass: improve error message
+- util-linux: add alternative links for ipcs,ipcrm
+- v86d: Improve kernel dependency
+- vim: upgrade to 9.0.1592
+- wget: upgrade to 1.21.4
+- wic: Add dependencies for erofs-utils
+- wireless-regdb: upgrade to 2023.05.03
+- xdpyinfo: upgrade to 1.3.4
+- zip: fix configure check by using _Static_assert
+
+
+Known Issues in Yocto-4.0.12
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- N/A
+
+
+Contributors to Yocto-4.0.12
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Alberto Planas
+- Alexander Kanavin
+- Alexander Sverdlin
+- Andrej Valek
+- Archana Polampalli
+- BELOUARGA Mohamed
+- Benjamin Bouvier
+- Bruce Ashfield
+- Charlie Wu
+- Chen Qi
+- Etienne Cordonnier
+- Fabien Mahot
+- Frieder Paape
+- Frieder Schrempf
+- Heiko Thole
+- Hitendra Prajapati
+- Jermain Horsman
+- Jose Quaresma
+- Kai Kang
+- Khem Raj
+- Lee Chee Yang
+- Marc Ferland
+- Marek Vasut
+- Martin Jansa
+- Mauro Queiros
+- Michael Opdenacker
+- Mikko Rapeli
+- Nikhil R
+- Ovidiu Panait
+- Peter Marko
+- Poonam Jadhav
+- Quentin Schulz
+- Richard Purdie
+- Ross Burton
+- Rusty Howell
+- Sakib Sajal
+- Soumya Sambu
+- Steve Sakoman
+- Sundeep KOKKONDA
+- Tim Orling
+- Tom Hochstein
+- Trevor Gamblin
+- Vijay Anusuri
+- Vivek Kumbhar
+- Wang Mingyu
+- Xiangyu Chen
+- Yoann Congal
+- Yogita Urade
+- Yuta Hayama
+
+
+Repositories / Downloads for Yocto-4.0.12
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+poky
+
+- Repository Location: :yocto_git:`/poky`
+- Branch: :yocto_git:`kirkstone </poky/log/?h=kirkstone>`
+- Tag: :yocto_git:`yocto-4.0.12 </poky/log/?h=yocto-4.0.12>`
+- Git Revision: :yocto_git:`d6b8790370500b99ca11f0d8a05c39b661ab2ba6 </poky/commit/?id=d6b8790370500b99ca11f0d8a05c39b661ab2ba6>`
+- Release Artefact: poky-d6b8790370500b99ca11f0d8a05c39b661ab2ba6
+- sha: 35f0390e0c5a12f403ed471c0b1254c13cbb9d7c7b46e5a3538e63e36c1ac280
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.0.12/poky-d6b8790370500b99ca11f0d8a05c39b661ab2ba6.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.0.12/poky-d6b8790370500b99ca11f0d8a05c39b661ab2ba6.tar.bz2
+
+openembedded-core
+
+- Repository Location: :oe_git:`/openembedded-core`
+- Branch: :oe_git:`kirkstone </openembedded-core/log/?h=kirkstone>`
+- Tag: :oe_git:`yocto-4.0.12 </openembedded-core/log/?h=yocto-4.0.12>`
+- Git Revision: :oe_git:`e1a604db8d2cf8782038b4016cc2e2052467333b </openembedded-core/commit/?id=e1a604db8d2cf8782038b4016cc2e2052467333b>`
+- Release Artefact: oecore-e1a604db8d2cf8782038b4016cc2e2052467333b
+- sha: 8b302eb3f3ffe5643f88bc6e4ae8f9a5cda63544d67e04637ecc4197e9750a1d
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.0.12/oecore-e1a604db8d2cf8782038b4016cc2e2052467333b.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.0.12/oecore-e1a604db8d2cf8782038b4016cc2e2052467333b.tar.bz2
+
+meta-mingw
+
+- Repository Location: :yocto_git:`/meta-mingw`
+- Branch: :yocto_git:`kirkstone </meta-mingw/log/?h=kirkstone>`
+- Tag: :yocto_git:`yocto-4.0.12 </meta-mingw/log/?h=yocto-4.0.12>`
+- Git Revision: :yocto_git:`a90614a6498c3345704e9611f2842eb933dc51c1 </meta-mingw/commit/?id=a90614a6498c3345704e9611f2842eb933dc51c1>`
+- Release Artefact: meta-mingw-a90614a6498c3345704e9611f2842eb933dc51c1
+- sha: 49f9900bfbbc1c68136f8115b314e95d0b7f6be75edf36a75d9bcd1cca7c6302
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.0.12/meta-mingw-a90614a6498c3345704e9611f2842eb933dc51c1.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.0.12/meta-mingw-a90614a6498c3345704e9611f2842eb933dc51c1.tar.bz2
+
+meta-gplv2
+
+- Repository Location: :yocto_git:`/meta-gplv2`
+- Branch: :yocto_git:`kirkstone </meta-gplv2/log/?h=kirkstone>`
+- Tag: :yocto_git:`yocto-4.0.12 </meta-gplv2/log/?h=yocto-4.0.12>`
+- Git Revision: :yocto_git:`d2f8b5cdb285b72a4ed93450f6703ca27aa42e8a </meta-gplv2/commit/?id=d2f8b5cdb285b72a4ed93450f6703ca27aa42e8a>`
+- Release Artefact: meta-gplv2-d2f8b5cdb285b72a4ed93450f6703ca27aa42e8a
+- sha: c386f59f8a672747dc3d0be1d4234b6039273d0e57933eb87caa20f56b9cca6d
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.0.12/meta-gplv2-d2f8b5cdb285b72a4ed93450f6703ca27aa42e8a.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.0.12/meta-gplv2-d2f8b5cdb285b72a4ed93450f6703ca27aa42e8a.tar.bz2
+
+bitbake
+
+- Repository Location: :oe_git:`/bitbake`
+- Branch: :oe_git:`2.0 </bitbake/log/?h=2.0>`
+- Tag: :oe_git:`yocto-4.0.12 </bitbake/log/?h=yocto-4.0.12>`
+- Git Revision: :oe_git:`41b6684489d0261753344956042be2cc4adb0159 </bitbake/commit/?id=41b6684489d0261753344956042be2cc4adb0159>`
+- Release Artefact: bitbake-41b6684489d0261753344956042be2cc4adb0159
+- sha: efa2b1c4d0be115ed3960750d1e4ed958771b2db6d7baee2d13ad386589376e8
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.0.12/bitbake-41b6684489d0261753344956042be2cc4adb0159.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.0.12/bitbake-41b6684489d0261753344956042be2cc4adb0159.tar.bz2
+
+yocto-docs
+
+- Repository Location: :yocto_git:`/yocto-docs`
+- Branch: :yocto_git:`kirkstone </yocto-docs/log/?h=kirkstone>`
+- Tag: :yocto_git:`yocto-4.0.12 </yocto-docs/log/?h=yocto-4.0.12>`
+- Git Revision: :yocto_git:`4dfef81ac6164764c6541e39a9fef81d49227096 </yocto-docs/commit/?id=4dfef81ac6164764c6541e39a9fef81d49227096>`
+
diff --git a/poky/documentation/migration-guides/release-notes-4.2.3.rst b/poky/documentation/migration-guides/release-notes-4.2.3.rst
new file mode 100644
index 0000000..3b568a1
--- /dev/null
+++ b/poky/documentation/migration-guides/release-notes-4.2.3.rst
@@ -0,0 +1,263 @@
+.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
+
+Release notes for Yocto-4.2.3 (Mickledore)
+------------------------------------------
+
+Security Fixes in Yocto-4.2.3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- bind: Fix :cve:`2023-2828` and :cve:`2023-2911`
+- cups: Fix :cve:`2023-34241`
+- dmidecode: Fix :cve:`2023-30630`
+- erofs-utils: Fix :cve:`2023-33551` and :cve:`2023-33552`
+- ghostscript: Fix :cve:`2023-36664`
+- go: Fix :cve_mitre:`2023-24531`
+- libarchive: ignore :cve:`2023-30571`
+- libjpeg-turbo: Fix :cve:`2023-2804`
+- libx11: Fix :cve:`2023-3138`
+- ncurses: Fix :cve:`2023-29491`
+- openssh: Fix :cve:`2023-38408`
+- python3-certifi: Fix :cve:`2023-37920`
+- python3-requests: Fix :cve:`2023-32681`
+- python3: Ignore :cve:`2023-36632`
+- qemu: fix :cve:`2023-0330`, :cve_mitre:`2023-2861`, :cve_mitre:`2023-3255` and :cve_mitre:`2023-3301`
+- ruby: Fix :cve:`2023-36617`
+- vim: Fix :cve:`2023-2609` and :cve:`2023-2610`
+- webkitgtk: Fix :cve:`2023-27932` and :cve:`2023-27954`
+
+
+Fixes in Yocto-4.2.3
+~~~~~~~~~~~~~~~~~~~~
+
+- acpica: Update :term:`SRC_URI`
+- automake: fix buildtest patch
+- baremetal-helloworld: Fix race condition
+- bind: upgrade to v9.18.17
+- binutils: stable 2.40 branch updates
+- build-appliance-image: Update to mickledore head revision
+- cargo.bbclass: set up cargo environment in common do_compile
+- conf.py: add macro for Mitre CVE links
+- curl: ensure all ptest failures are caught
+- cve-update-nvd2-native: actually use API keys
+- cve-update-nvd2-native: fix cvssV3 metrics
+- cve-update-nvd2-native: handle all configuration nodes, not just first
+- cve-update-nvd2-native: increase retry count
+- cve-update-nvd2-native: log a little more
+- cve-update-nvd2-native: retry all errors and sleep between retries
+- cve-update-nvd2-native: use exact times, don't truncate
+- dev-manual: wic.rst: Update native tools build command
+- devtool/upgrade: raise an error if extracting source produces more than one directory
+- diffutils: upgrade to 3.10
+- docs: ref-manual: terms: fix typos in :term:`SPDX` term
+- file: fix the way path is written to environment-setup.d
+- file: return wrapper to fix builds when file is in buildtools-tarball
+- freetype: upgrade to 2.13.1
+- gcc-testsuite: Fix ppc cpu specification
+- gcc: don't pass --enable-standard-branch-protection
+- glibc-locale: use stricter matching for metapackages' runtime dependencies
+- glibc-testsuite: Fix network restrictions causing test failures
+- glibc/check-test-wrapper: don't emit warnings from ssh
+- go: upgrade to 1.20.6
+- gstreamer1.0: upgrade to 1.22.4
+- ifupdown: install missing directories
+- kernel-module-split add systemd modulesloaddir and modprobedir config
+- kernel-module-split: install config modules directories only when they are needed
+- kernel-module-split: make autoload and probeconf distribution specific
+- kernel-module-split: use context manager to open files
+- kernel: Fix path comparison in kernel staging dir symlinking
+- kernel: config modules directories are handled by kernel-module-split
+- kernel: don't fail if Modules.symvers doesn't exist
+- libassuan: upgrade to 2.5.6
+- libksba: upgrade to 1.6.4
+- libnss-nis: upgrade to 3.2
+- libproxy: fetch from git
+- libwebp: upgrade to 1.3.1
+- libx11: upgrade to 1.8.6
+- libxcrypt: fix hard-coded ".so" extension
+- linux-firmware : Add firmware of RTL8822 serie
+- linux-firmware: Fix mediatek mt7601u firmware path
+- linux-firmware: package firmare for Dragonboard 410c
+- linux-firmware: split platform-specific Adreno shaders to separate packages
+- linux-firmware: upgrade to 20230625
+- linux-yocto/5.15: update to v5.15.124
+- linux-yocto/6.1: cfg: update ima.cfg to match current meta-integrity
+- linux-yocto/6.1: upgrade to v6.1.38
+- ltp: Add kernel loopback module dependency
+- ltp: add :term:`RDEPENDS` on findutils
+- lttng-ust: upgrade to 2.13.6
+- machine/arch-arm64: add -mbranch-protection=standard
+- maintainers.inc: Modify email address
+- mdadm: add util-linux-blockdev ptest dependency
+- mdadm: fix 07revert-inplace ptest
+- mdadm: fix segfaults when running ptests
+- mdadm: fix util-linux ptest dependency
+- mdadm: re-add mdadm-ptest to PTESTS_SLOW
+- mdadm: skip running known broken ptests
+- meson.bbclass: Point to llvm-config from native sysroot
+- migration-guides: add release notes for 4.0.10
+- migration-guides: add release notes for 4.0.11
+- migration-guides: add release notes for 4.2.2
+- oeqa/runtime/cases/rpm: fix wait_for_no_process_for_user failure case
+- oeqa/runtime/ltp: Increase ltp test output timeout
+- oeqa/selftest/devtool: add unit test for "devtool add -b"
+- oeqa/ssh: Further improve process exit handling
+- oeqa/target/ssh: Ensure EAGAIN doesn't truncate output
+- oeqa/utils/nfs: allow requesting non-udp ports
+- openssh: upgrade to 9.3p2
+- openssl: add PERLEXTERNAL path to test its existence
+- openssl: use a glob on the PERLEXTERNAL to track updates on the path
+- opkg-utils: upgrade to 0.6.2
+- opkg: upgrade to 0.6.2
+- pkgconf: update :term:`SRC_URI`
+- poky.conf: bump version for 4.2.3 release
+- poky.conf: update :term:`SANITY_TESTED_DISTROS` to match autobuilder
+- ptest-runner: Pull in parallel test fixes and output handling
+- python3-certifi: upgrade to 2023.7.22
+- python3: fix missing comma in get_module_deps3.py
+- recipetool: Fix inherit in created -native* recipes
+- ref-manual: LTS releases now supported for 4 years
+- ref-manual: document image-specific variant of :term:`INCOMPATIBLE_LICENSE`
+- ref-manual: releases.svg: updates
+- resulttool/resultutils: allow index generation despite corrupt json
+- rootfs-postcommands.bbclass: Revert "add post func remove_unused_dnf_log_lock"
+- rootfs: Add debugfs package db file copy and cleanup
+- rootfs_rpm: don't depend on opkg-native for update-alternatives
+- rpm: Pick debugfs package db files/dirs explicitly
+- rust-common.bbclass: move musl-specific linking fix from rust-source.inc
+- scripts/oe-setup-builddir: copy conf-notes.txt to build dir
+- scripts/resulttool: add mention about new detected tests
+- selftest/cases/glibc.py: fix the override syntax
+- selftest/cases/glibc.py: increase the memory for testing
+- selftest/cases/glibc.py: switch to using NFS over TCP
+- shadow-sysroot: add license information
+- systemd-systemctl: fix errors in instance name expansion
+- taglib: upgrade to 1.13.1
+- target/ssh: Ensure exit code set for commands
+- tcf-agent: upgrade to 1.8.0
+- testimage/oeqa: Drop testimage_dump_host functionality
+- tiff: upgrade to 4.5.1
+- uboot-extlinux-config.bbclass: fix old override syntax in comment
+- util-linux: add alternative links for ipcs,ipcrm
+- vim: upgrade to 9.0.1592
+- webkitgtk: upgrade to 2.38.6
+- weston: Cleanup and fix x11 and xwayland dependencies
+
+
+Known Issues in Yocto-4.2.3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- N/A
+
+
+Contributors to Yocto-4.2.3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+- Alejandro Hernandez Samaniego
+- Alex Kiernan
+- Alexander Kanavin
+- Alexis Lothoré
+- Andrej Valek
+- Anuj Mittal
+- Archana Polampalli
+- BELOUARGA Mohamed
+- Benjamin Bouvier
+- Bruce Ashfield
+- Changqing Li
+- Chen Qi
+- Daniel Semkowicz
+- Dmitry Baryshkov
+- Enrico Scholz
+- Etienne Cordonnier
+- Joe Slater
+- Joel Stanley
+- Jose Quaresma
+- Julien Stephan
+- Kai Kang
+- Khem Raj
+- Lee Chee Yang
+- Marek Vasut
+- Mark Hatle
+- Michael Halstead
+- Michael Opdenacker
+- Mingli Yu
+- Narpat Mali
+- Oleksandr Hnatiuk
+- Ovidiu Panait
+- Peter Marko
+- Quentin Schulz
+- Richard Purdie
+- Ross Burton
+- Sanjana
+- Sakib Sajal
+- Staffan Rydén
+- Steve Sakoman
+- Stéphane Veyret
+- Sudip Mukherjee
+- Thomas Roos
+- Tom Hochstein
+- Trevor Gamblin
+- Wang Mingyu
+- Yi Zhao
+- Yoann Congal
+- Yogita Urade
+- Yuta Hayama
+
+
+Repositories / Downloads for Yocto-4.2.3
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+poky
+
+- Repository Location: :yocto_git:`/poky`
+- Branch: :yocto_git:`mickledore </poky/log/?h=mickledore>`
+- Tag: :yocto_git:`yocto-4.2.3 </poky/log/?h=yocto-4.2.3>`
+- Git Revision: :yocto_git:`aa63b25cbe25d89ab07ca11ee72c17cab68df8de </poky/commit/?id=aa63b25cbe25d89ab07ca11ee72c17cab68df8de>`
+- Release Artefact: poky-aa63b25cbe25d89ab07ca11ee72c17cab68df8de
+- sha: 9e2b40fc25f7984b3227126ec9b8aa68d3747c8821fb7bf8cb635fc143f894c3
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.2.3/poky-aa63b25cbe25d89ab07ca11ee72c17cab68df8de.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.2.3/poky-aa63b25cbe25d89ab07ca11ee72c17cab68df8de.tar.bz2
+
+openembedded-core
+
+- Repository Location: :oe_git:`/openembedded-core`
+- Branch: :oe_git:`mickledore </openembedded-core/log/?h=mickledore>`
+- Tag: :oe_git:`yocto-4.2.3 </openembedded-core/log/?h=yocto-4.2.3>`
+- Git Revision: :oe_git:`7e3489c0c5970389c8a239dc7b367bcadf554eb5 </openembedded-core/commit/?id=7e3489c0c5970389c8a239dc7b367bcadf554eb5>`
+- Release Artefact: oecore-7e3489c0c5970389c8a239dc7b367bcadf554eb5
+- sha: 68620aca7c9db6b9a65d9853cacff4e60578f0df39e3e37114e062e1667ba724
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.2.3/oecore-7e3489c0c5970389c8a239dc7b367bcadf554eb5.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.2.3/oecore-7e3489c0c5970389c8a239dc7b367bcadf554eb5.tar.bz2
+
+meta-mingw
+
+- Repository Location: :yocto_git:`/meta-mingw`
+- Branch: :yocto_git:`mickledore </meta-mingw/log/?h=mickledore>`
+- Tag: :yocto_git:`yocto-4.2.3 </meta-mingw/log/?h=yocto-4.2.3>`
+- Git Revision: :yocto_git:`92258028e1b5664a9f832541d5c4f6de0bd05e07 </meta-mingw/commit/?id=92258028e1b5664a9f832541d5c4f6de0bd05e07>`
+- Release Artefact: meta-mingw-92258028e1b5664a9f832541d5c4f6de0bd05e07
+- sha: ee081460b5dff4fb8dd4869ce5631718dbaaffbede9532b879b854c18f1b3f5d
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.2.3/meta-mingw-92258028e1b5664a9f832541d5c4f6de0bd05e07.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.2.3/meta-mingw-92258028e1b5664a9f832541d5c4f6de0bd05e07.tar.bz2
+
+bitbake
+
+- Repository Location: :oe_git:`/bitbake`
+- Branch: :oe_git:`2.4 </bitbake/log/?h=2.4>`
+- Tag: :oe_git:`yocto-4.2.3 </bitbake/log/?h=yocto-4.2.3>`
+- Git Revision: :oe_git:`08033b63ae442c774bd3fce62844eac23e6882d7 </bitbake/commit/?id=08033b63ae442c774bd3fce62844eac23e6882d7>`
+- Release Artefact: bitbake-08033b63ae442c774bd3fce62844eac23e6882d7
+- sha: 1d070c133bfb6502ac04befbf082cbfda7582c8b1c48296a788384352e5061fd
+- Download Locations:
+ http://downloads.yoctoproject.org/releases/yocto/yocto-4.2.3/bitbake-08033b63ae442c774bd3fce62844eac23e6882d7.tar.bz2
+ http://mirrors.kernel.org/yocto/yocto/yocto-4.2.3/bitbake-08033b63ae442c774bd3fce62844eac23e6882d7.tar.bz2
+
+yocto-docs
+
+- Repository Location: :yocto_git:`/yocto-docs`
+- Branch: :yocto_git:`mickledore </yocto-docs/log/?h=mickledore>`
+- Tag: :yocto_git:`yocto-4.2.3 </yocto-docs/log/?h=yocto-4.2.3>`
+- Git Revision: :yocto_git:`8e6752a9e55d16f3713e248b37f9d4d2745a2375 </yocto-docs/commit/?id=8e6752a9e55d16f3713e248b37f9d4d2745a2375>`
+
diff --git a/poky/documentation/overview-manual/development-environment.rst b/poky/documentation/overview-manual/development-environment.rst
index 6139e7a..262d5cb 100644
--- a/poky/documentation/overview-manual/development-environment.rst
+++ b/poky/documentation/overview-manual/development-environment.rst
@@ -232,8 +232,8 @@
For information on finding out who is responsible for (maintains) a
particular area of code in the Yocto Project, see the
- ":ref:`dev-manual/changes:submitting a change to the yocto project`"
- section of the Yocto Project Development Tasks Manual.
+ ":doc:`../contributor-guide/identify-component`"
+ section of the Yocto Project and OpenEmbedded Contributor Guide.
The Yocto Project ``poky`` Git repository also has an upstream
contribution Git repository named ``poky-contrib``. You can see all the
@@ -264,8 +264,8 @@
maintainer include them into an upstream branch. This process is called
"submitting a patch" or "submitting a change." For information on
submitting patches and changes, see the
-":ref:`dev-manual/changes:submitting a change to the yocto project`"
-section in the Yocto Project Development Tasks Manual.
+":doc:`../contributor-guide/submit-changes`" section in the Yocto Project
+and OpenEmbedded Contributor Guide.
In summary, there is a single point of entry for changes into the
development branch of the Git repository, which is controlled by the
@@ -328,11 +328,10 @@
software on which to develop. The Yocto Project has two scripts named
``create-pull-request`` and ``send-pull-request`` that ship with the
release to facilitate this workflow. You can find these scripts in
- the ``scripts`` folder of the
- :term:`Source Directory`. For information
+ the ``scripts`` folder of the :term:`Source Directory`. For information
on how to use these scripts, see the
- ":ref:`dev-manual/changes:using scripts to push a change upstream and request a pull`"
- section in the Yocto Project Development Tasks Manual.
+ ":ref:`contributor-guide/submit-changes:using scripts to push a change upstream and request a pull`"
+ section in the Yocto Project and OpenEmbedded Contributor Guide.
- *Patch Workflow:* This workflow allows you to notify the maintainer
through an email that you have a change (or patch) you would like
@@ -340,8 +339,8 @@
this type of change, you format the patch and then send the email
using the Git commands ``git format-patch`` and ``git send-email``.
For information on how to use these scripts, see the
- ":ref:`dev-manual/changes:submitting a change to the yocto project`"
- section in the Yocto Project Development Tasks Manual.
+ ":doc:`../contributor-guide/submit-changes`" section in the Yocto Project
+ and OpenEmbedded Contributor Guide.
Git
===
diff --git a/poky/documentation/poky.yaml.in b/poky/documentation/poky.yaml.in
index b2b6a63..2922214 100644
--- a/poky/documentation/poky.yaml.in
+++ b/poky/documentation/poky.yaml.in
@@ -13,18 +13,18 @@
UBUNTU_HOST_PACKAGES_ESSENTIAL : "gawk wget git diffstat unzip texinfo gcc \
build-essential chrpath socat cpio python3 python3-pip python3-pexpect \
xz-utils debianutils iputils-ping python3-git python3-jinja2 libegl1-mesa libsdl1.2-dev \
- python3-subunit mesa-common-dev zstd liblz4-tool file locales
+ python3-subunit mesa-common-dev zstd liblz4-tool file locales libacl1
\n\ $ sudo locale-gen en_US.UTF-8"
FEDORA_HOST_PACKAGES_ESSENTIAL : "gawk make wget tar bzip2 gzip python3 unzip perl patch \
diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath \
ccache perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue perl-bignum socat \
python3-pexpect findutils which file cpio python python3-pip xz python3-GitPython \
python3-jinja2 SDL-devel rpcgen mesa-libGL-devel perl-FindBin perl-File-Compare \
- perl-File-Copy perl-locale zstd lz4 hostname glibc-langpack-en"
+ perl-File-Copy perl-locale zstd lz4 hostname glibc-langpack-en libacl"
OPENSUSE_HOST_PACKAGES_ESSENTIAL : "python gcc gcc-c++ git chrpath make wget python-xml \
diffstat makeinfo python-curses patch socat python3 python3-curses tar python3-pip \
python3-pexpect xz which python3-Jinja2 Mesa-libEGL1 libSDL-devel rpcgen Mesa-dri-devel \
- zstd lz4 bzip2 gzip hostname
+ zstd lz4 bzip2 gzip hostname libacl1
\n\ $ sudo pip3 install GitPython"
ALMALINUX_HOST_PACKAGES_ESSENTIAL : "-y epel-release
\n\ $ sudo yum install dnf-plugins-core
@@ -34,7 +34,7 @@
diffutils diffstat git cpp gcc gcc-c++ glibc-devel texinfo chrpath ccache \
socat perl-Data-Dumper perl-Text-ParseWords perl-Thread-Queue python3-pip \
python3-GitPython python3-jinja2 python3-pexpect xz which SDL-devel \
- rpcgen mesa-libGL-devel zstd lz4 cpio glibc-langpack-en"
+ rpcgen mesa-libGL-devel zstd lz4 cpio glibc-langpack-en libacl"
PIP3_HOST_PACKAGES_DOC : "$ sudo pip3 install sphinx sphinx_rtd_theme pyyaml"
MIN_PYTHON_VERSION : "3.8.0"
MIN_TAR_VERSION : "1.28"
diff --git a/poky/documentation/ref-manual/classes.rst b/poky/documentation/ref-manual/classes.rst
index a7819d5..3f0d484 100644
--- a/poky/documentation/ref-manual/classes.rst
+++ b/poky/documentation/ref-manual/classes.rst
@@ -266,12 +266,15 @@
Using this class makes it very easy to build Rust programs. All you need
is to use the :term:`SRC_URI` variable to point to a source repository
which can be built by Cargo, typically one that was created by the
-``cargo new`` command, containing a ``Cargo.toml`` file and a ``src``
+``cargo new`` command, containing a ``Cargo.toml`` file, a ``Cargo.lock`` file and a ``src``
subdirectory.
-You will find a simple example in the
-:oe_git:`rust-hello-world_git.bb </openembedded-core/tree/meta/recipes-extended/rust-example/rust-hello-world_git.bb>`
-recipe. A more complex example, with package dependencies, is the
+If you want to build and package tests of the program, inherit the
+:ref:`ref-classes-ptest-cargo` class instead of :ref:`ref-classes-cargo`.
+
+You will find an example (that show also how to handle possible git source dependencies) in the
+:oe_git:`zvariant_3.12.0.bb </openembedded-core/tree/meta-selftest/recipes-extended/zvariant/zvariant_3.12.0.bb>`
+recipe. Another example, with only crate dependencies, is the
:oe_git:`uutils-coreutils </meta-openembedded/tree/meta-oe/recipes-core/uutils-coreutils>`
recipe, which was generated by the `cargo-bitbake <https://crates.io/crates/cargo-bitbake>`__
tool.
@@ -290,8 +293,6 @@
library, which is built by Cargo but cannot use the :ref:`ref-classes-cargo`
class. This is why this class was introduced.
-.. _ref-classes-ccache:
-
.. _ref-classes-cargo-update-recipe-crates:
``cargo-update-recipe-crates``
@@ -316,6 +317,8 @@
That's also something you can achieve by using the
`cargo-bitbake <https://crates.io/crates/cargo-bitbake>`__ tool.
+.. _ref-classes-ccache:
+
``ccache``
==========
@@ -2517,6 +2520,17 @@
section in the Yocto Project Development Tasks Manual for more information
on ptest.
+.. _ref-classes-ptest-cargo:
+
+``ptest-cargo``
+===============
+
+The :ref:`ref-classes-ptest-cargo` class is a class which extends the
+:ref:`ref-classes-cargo` class and adds ``compile_ptest_cargo`` and
+``install_ptest_cargo`` steps to respectively build and install
+test suites defined in the ``Cargo.toml`` file, into a dedicated
+``-ptest`` package.
+
.. _ref-classes-ptest-gnome:
``ptest-gnome``
diff --git a/poky/documentation/ref-manual/resources.rst b/poky/documentation/ref-manual/resources.rst
index d2344e3..8c3726e 100644
--- a/poky/documentation/ref-manual/resources.rst
+++ b/poky/documentation/ref-manual/resources.rst
@@ -23,8 +23,7 @@
to the project either by creating and sending pull requests, or by
submitting patches through email. For information on how to do both as
well as information on how to identify the maintainer for each area of
-code, see the ":ref:`dev-manual/changes:submitting a change to the yocto project`" section in the
-Yocto Project Development Tasks Manual.
+code, see the :doc:`../contributor-guide/index`.
.. _resources-bugtracker:
@@ -46,8 +45,8 @@
For a general procedure and guidelines on how to use Bugzilla to submit a bug
against the Yocto Project, see the following:
-- The ":ref:`dev-manual/changes:submitting a defect against the yocto project`"
- section in the Yocto Project Development Tasks Manual.
+- The ":doc:`../contributor-guide/report-defect`"
+ section in the Yocto Project and OpenEmbedded Contributor Guide.
- The Yocto Project :yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>`
diff --git a/poky/documentation/ref-manual/system-requirements.rst b/poky/documentation/ref-manual/system-requirements.rst
index d6e8b45..e1ff51c8 100644
--- a/poky/documentation/ref-manual/system-requirements.rst
+++ b/poky/documentation/ref-manual/system-requirements.rst
@@ -55,27 +55,47 @@
Supported Linux Distributions
=============================
-Currently, the Yocto Project is supported on the following distributions:
-
-- Ubuntu 18.04 (LTS)
+Currently, the &DISTRO; release ("&DISTRO_NAME;") of the Yocto Project is
+supported on the following distributions:
- Ubuntu 20.04 (LTS)
- Ubuntu 22.04 (LTS)
-- Fedora 36
-
- Fedora 37
-- AlmaLinux 8.7
+- Fedora 38
-- AlmaLinux 9.1
+- CentOS Stream 8
-- Debian GNU/Linux 11.x (Bullseye)
+- Debian GNU/Linux 11 (Bullseye)
+
+- Debian GNU/Linux 12 (Bookworm)
+
+- OpenSUSE Leap 15.4
+
+- AlmaLinux 8.8
+
+- AlmaLinux 9.2
+
+The following distribution versions are still tested (being listed
+in :term:`SANITY_TESTED_DISTROS`), even though the organizations
+publishing them no longer make updates publicly available:
+
+- Ubuntu 18.04 (LTS)
+
+- Ubuntu 22.10
- OpenSUSE Leap 15.3
-- OpenSUSE Leap 15.4
+Note that the Yocto Project doesn't have access to private updates
+that some of these versions may have. Therefore, our testing has
+limited value if you have access to such updates.
+
+Finally, here are the distribution versions which were previously
+tested on former revisions of "&DISTRO_NAME;", but no longer are:
+
+*This list is currently empty*
.. note::
@@ -114,9 +134,8 @@
interested in hearing about your experience. For information on
how to submit a bug, see the Yocto Project
:yocto_wiki:`Bugzilla wiki page </Bugzilla_Configuration_and_Bug_Tracking>`
- and the ":ref:`dev-manual/changes:submitting a defect against the yocto project`"
- section in the Yocto Project Development Tasks Manual.
-
+ and the ":doc:`../contributor-guide/report-defect`"
+ section in the Yocto Project and OpenEmbedded Contributor Guide.
Required Packages for the Build Host
====================================
diff --git a/poky/documentation/ref-manual/variables.rst b/poky/documentation/ref-manual/variables.rst
index 44e2dd0..7a71abc 100644
--- a/poky/documentation/ref-manual/variables.rst
+++ b/poky/documentation/ref-manual/variables.rst
@@ -192,10 +192,6 @@
ASSUME_SHLIBS = "libEGL.so.1:libegl-implementation"
- :term:`AUTHOR`
- The email address used to contact the original author or authors in
- order to send patches and forward bugs.
-
:term:`AUTO_LIBNAME_PKGS`
When the :ref:`ref-classes-debian` class is inherited,
which is the default behavior, :term:`AUTO_LIBNAME_PKGS` specifies which