Gitiles
Code Review Sign In
gerrit.openbmc.org / mdmillerii / openbmc / 6304341c661d1f3b307015d4c097083daefa69a3
commit6304341c661d1f3b307015d4c097083daefa69a3[log] [tgz]
authorMatt Spinler <spinler@us.ibm.com>Tue Jun 06 09:40:45 2017 -0500
committerPatrick Williams <patrick@stwcx.xyz>Wed Jun 14 07:39:59 2017 +0000
treeac38370e2762cbbe5fc2360ebb4b8d0ff2fc83c9
parent20a9336fb649da817086eb00c194965bbb105287 [diff]
Install witherspoon-reset-fan-watchdog service

This is a witherspoon only service that will
reset the fan watchdog circuit on a poweron, which
would bring the fans out of watchdog control if they
previously were.

The watchdog is reset by toggling a GPIO that feeds
a latch that drives the watchdog signal to the fan
controller.  The GPIO parameters are obtained from
an environment file.

The witherspoon-fan-watchdog.bb recipe will have other
watchdog related services added to it in the future.

Resolves openbmc/openbmc#1687

Change-Id: I103ccf6cb69f8a98fc352fa2fa05e45ecbf2cd23
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
4 files changed
tree: ac38370e2762cbbe5fc2360ebb4b8d0ff2fc83c9
  1. import-layers/
  2. meta-openbmc-bsp/
  3. meta-openbmc-machines/
  4. meta-phosphor/
  5. bitbake ⇨ import-layers/yocto-poky/bitbake
  6. documentation ⇨ import-layers/yocto-poky/documentation
  7. LICENSE ⇨ import-layers/yocto-poky/LICENSE
  8. meta ⇨ import-layers/yocto-poky/meta
  9. meta-poky ⇨ import-layers/yocto-poky/meta-poky
  10. meta-selftest ⇨ import-layers/yocto-poky/meta-selftest
  11. meta-skeleton ⇨ import-layers/yocto-poky/meta-skeleton
  12. meta-yocto-bsp ⇨ import-layers/yocto-poky/meta-yocto-bsp
  13. oe-init-build-env ⇨ import-layers/yocto-poky/oe-init-build-env
  14. oe-init-build-env-memres ⇨ import-layers/yocto-poky/oe-init-build-env-memres
  15. scripts ⇨ import-layers/yocto-poky/scripts
  16. .gitignore
  17. .gitreview
  18. .templateconf
  19. openbmc-env
  20. README.md
README.md

OpenBMC

Build Status

The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, Open-Embedded, Systemd and DBus to allow easy customization for your server platform.

Setting up your OpenBMC project

1) Prerequisite

  • Ubuntu 14.04
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
  • Fedora 23
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake
sudo dnf groupinstall "C Development Tools and Libraries"

2) Download the source

git clone git@github.com:openbmc/openbmc.git
cd openbmc

3) Target your hardware

Any build requires an environment variable known as TEMPLATECONF to be set to a hardware target. OpenBMC has placed all known hardware targets in a standard directory structure meta-openbmc-machines/meta-openpower/[company]/[target]. You can see all of the known targets with find meta-openbmc-machines -type d -name conf. Choose the hardware target and then move to the next step. Additional examples can be found in the OpenBMC Cheatsheet

MachineTEMPLATECONF
Palmettometa-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf
Barreleyemeta-openbmc-machines/meta-openpower/meta-rackspace/meta-barreleye/conf
Zaiusmeta-openbmc-machines/meta-openpower/meta-ingrasys/meta-zaius/conf
Witherspoonmeta-openbmc-machines/meta-openpower/meta-ibm/meta-witherspoon/conf

As an example target Palmetto

export TEMPLATECONF=meta-openbmc-machines/meta-openpower/meta-ibm/meta-palmetto/conf

3) Build

. openbmc-env
bitbake obmc-phosphor-image

Additional details can be found in the docs repository.

Build Validation and Testing

Commits submitted by members of the OpenBMC Github community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check directive is run. At the system level, the commit is built into a firmware image and run with a arm-softmmu QEMU model against a barrage of CI tests.

Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.

Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.

Submitting Patches

Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.

Bug Reporting

Issues are managed on Github. It is recommended you search through the issues before opening a new one.

Finding out more

Dive deeper in to OpenBMC by opening the docs repository

Contact