subtree updates
meta-raspberrypi: b112816e95..2634621374:
Vincenzo Pacella (1):
linux-raspberrypi: add linux-raspberrypi-rt 4.19
meta-xilinx: f3c8b1c9a8..68eacd5636:
Alejandro Enedino Hernandez Samaniego (4):
machine-xilinx-default.inc: Disable PIE (ASLR) for Microblaze
meta-xilinx-bsp: Update layer compatibility to warrior release
meta-xilinx-contrib: Update layer compatibility to warrior release
meta-xilinx-standalone: Update layer compatibility to warrior release
Jaewon Lee (2):
microblaze-kc705-Convert-microblaze-generic-to-k.patch:update patch
Update recipes for Xilinx v2019.1 release
Manjukumar Matha (7):
microblaze: Update to v11.0
u-boot-xlnx.inc: Add bison-native dependency for 2019.01
u-boot-zynq-scr.bb: Recipe to create u-boot.scr for Xilinx devices
microblazeel*.conf: Add microblaze generic machines
-generic.conf: Add generic machines for Zynq and ZU+
layer.conf: Add warning for dangling bbappends
conf/machine/*-zynq7.conf: Fix UBOOT_ELF for upstream u-boot version
Michael Monaghan (1):
kernel-simpleimage.bbclass: Fix do_prep_simpleimage `[[: not found`
Swagath Gadde (1):
zcu1285-zynqmp.conf: Add support for zcu1285 board
Change-Id: I0e3c5e57b0316f438d3f1fd80bd047dcbbac384e
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>
diff --git a/meta-xilinx/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass b/meta-xilinx/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass
index 348d0a7..6da28f3 100644
--- a/meta-xilinx/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass
+++ b/meta-xilinx/meta-xilinx-bsp/classes/kernel-simpleimage.bbclass
@@ -13,7 +13,7 @@
do_prep_simpleimage () {
install -d ${B}/arch/${ARCH}/boot/dts
for type in ${KERNEL_IMAGETYPES} ; do
- if [[ "${type}" =~ "simpleImage" ]] && [ ${ARCH} = "microblaze" ]; then
+ if [ -z "${type##*simpleImage*}" ] && [ ${ARCH} = "microblaze" ]; then
ext="${type##*.}"
# Microblaze simpleImage only works with dts file
cp ${RECIPE_SYSROOT}/boot/devicetree/${ext}.dts ${B}/arch/${ARCH}/boot/dts/
@@ -23,7 +23,7 @@
do_deploy_append () {
for type in ${KERNEL_IMAGETYPES} ; do
- if [[ "${type}" =~ "simpleImage" ]] && [ ${ARCH} = "microblaze" ]; then
+ if [ -z "${type##*simpleImage*}" ] && [ ${ARCH} = "microblaze" ]; then
base_name=${imageType}-${KERNEL_IMAGE_NAME}
install -m 0644 ${KERNEL_OUTPUT_DIR}/${type}.strip $deployDir/${base_name}.strip
install -m 0644 ${KERNEL_OUTPUT_DIR}/${type}.unstrip $deployDir/${base_name}.unstrip
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/layer.conf b/meta-xilinx/meta-xilinx-bsp/conf/layer.conf
index fc51165..437616c 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/layer.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/layer.conf
@@ -11,5 +11,7 @@
LAYERDEPENDS_xilinx = "core"
-LAYERSERIES_COMPAT_xilinx = "sumo thud"
+LAYERSERIES_COMPAT_xilinx = "warrior"
+
+BB_DANGLINGAPPENDS_WARNONLY ?= "1"
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc b/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc
index 3d927e7..2ffd5b2 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/include/machine-xilinx-default.inc
@@ -33,6 +33,11 @@
PREFERRED_PROVIDER_virtual/libgl_mali400 = "mesa-gl"
PREFERRED_PROVIDER_virtual/mesa_mali400 = "mesa-gl"
+# microblaze does not get on with pie for reasons not looked into as yet
+GCCPIE_microblaze = ""
+GLIBCPIE_microblaze = ""
+SECURITY_CFLAGS_microblaze = ""
+SECURITY_LDFLAGS_microblaze = ""
XSERVER ?= " \
xserver-xorg \
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf
index 73ff40f..d79e4ef 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/kc705-microblazeel.conf
@@ -6,7 +6,7 @@
require conf/machine/include/tune-microblaze.inc
require conf/machine/include/machine-xilinx-default.inc
-TUNE_FEATURES_tune-microblaze += "v10.0 barrel-shift reorder pattern-compare multiply-high divide-hard"
+TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift reorder pattern-compare multiply-high divide-hard"
MACHINE_FEATURES = ""
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf
new file mode 100644
index 0000000..00aede1
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-mh-div-generic.conf
@@ -0,0 +1,17 @@
+#@TYPE: Machine
+#@NAME: microblazeel-v11.0-bs-cmp-mh-div-generic
+#@DESCRIPTION: microblazeel-v11.0-bs-cmp-mh-div
+
+require conf/machine/include/tune-microblaze.inc
+require conf/machine/include/machine-xilinx-default.inc
+
+TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift pattern-compare reorder divide-hard multiply-high"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "linux.bin.ub"
+KERNEL_IMAGETYPES = ""
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native"
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf
new file mode 100644
index 0000000..30afbd7
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/microblazeel-v11.0-bs-cmp-ml-generic.conf
@@ -0,0 +1,17 @@
+#@TYPE: Machine
+#@NAME: microblazeel-v11.0-bs-cmp-ml-generic
+#@DESCRIPTION: microblazeel-v11.0-bs-cmp-ml
+
+require conf/machine/include/tune-microblaze.inc
+require conf/machine/include/machine-xilinx-default.inc
+
+TUNE_FEATURES_tune-microblaze += "v11.0 barrel-shift reorder pattern-compare multiply-low"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "linux.bin.ub"
+KERNEL_IMAGETYPES = ""
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native"
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf
index 8869424..83c5fc1 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/microzed-zynq7.conf
@@ -14,6 +14,7 @@
PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
UBOOT_MACHINE = "zynq_microzed_config"
SPL_BINARY ?= "spl/boot.bin"
+UBOOT_ELF_zynq = "u-boot"
EXTRA_IMAGEDEPENDS += " \
u-boot-zynq-uenv \
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf
index 911bf90..c229dac 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/picozed-zynq7.conf
@@ -18,6 +18,7 @@
PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
UBOOT_MACHINE = "zynq_picozed_config"
SPL_BINARY ?= "spl/boot.bin"
+UBOOT_ELF_zynq = "u-boot"
EXTRA_IMAGEDEPENDS += " \
u-boot-zynq-uenv \
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf
new file mode 100644
index 0000000..0450854
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zcu1285-zynqmp.conf
@@ -0,0 +1,38 @@
+#@TYPE: Machine
+#@NAME: zcu1285-zynqmp
+#@DESCRIPTION: Machine support for ZCU1285 Evaluation Board.
+#
+
+SOC_VARIANT ?= "dr"
+
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-overrides.inc
+require conf/machine/include/machine-xilinx-default.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+
+UBOOT_MACHINE = "xilinx_zynqmp_zc1275_revB_defconfig"
+SPL_BINARY ?= "spl/boot.bin"
+
+SERIAL_CONSOLE ?= "115200 ttyPS0"
+
+SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+
+KERNEL_DEVICETREE = "xilinx/zynqmp-zcu1285-revA.dtb"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
+
+PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu"
+PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu"
+
+EXTRA_IMAGEDEPENDS += " \
+ u-boot-zynq-uenv \
+ arm-trusted-firmware \
+ virtual/boot-bin \
+ virtual/bootloader \
+ "
+IMAGE_BOOT_FILES += " \
+ uEnv.txt \
+ atf-uboot.ub \
+ "
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf
index 36c51b7..0b0a0de 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zedboard-zynq7.conf
@@ -17,6 +17,7 @@
# u-boot configuration
UBOOT_MACHINE = "zynq_zed_config"
SPL_BINARY ?= "spl/boot.bin"
+UBOOT_ELF_zynq = "u-boot"
EXTRA_IMAGEDEPENDS += " \
u-boot-zynq-uenv \
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf
index ba355d5..87634fc 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-linux-bd-zynq7.conf
@@ -22,6 +22,7 @@
UBOOT_MACHINE = "zynq_zybo_config"
SPL_BINARY ?= "spl/boot.bin"
FORCE_PLATFORM_INIT = "1"
+UBOOT_ELF_zynq = "u-boot"
EXTRA_IMAGEDEPENDS += " \
u-boot-zynq-uenv \
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf
index 049add9..732fa94 100644
--- a/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zybo-zynq7.conf
@@ -18,6 +18,7 @@
PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
UBOOT_MACHINE = "zynq_zybo_config"
SPL_BINARY ?= "spl/boot.bin"
+UBOOT_ELF_zynq = "u-boot"
EXTRA_IMAGEDEPENDS += " \
u-boot-zynq-uenv \
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zynq-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynq-generic.conf
new file mode 100644
index 0000000..12fd138
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynq-generic.conf
@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME:
+#@DESCRIPTION: zynq devices
+
+require conf/machine/include/tune-zynq.inc
+require conf/machine/include/machine-xilinx-overrides.inc
+require conf/machine/include/machine-xilinx-default.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost usbgadget"
+
+EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native"
diff --git a/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf
new file mode 100644
index 0000000..98385d2
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/conf/machine/zynqmp-generic.conf
@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME:
+#@DESCRIPTION: zynqmp devices
+
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-overrides.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-qemu.inc
+
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+
+PREFERRED_PROVIDER_qemu-helper-native = "qemu-xilinx-helper-native"
+
+EXTRA_IMAGEDEPENDS += "libyaml-native python3-cython-native python3-pyyaml-native"
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
index 1b42819..785f915 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware.inc
@@ -13,7 +13,7 @@
B = "${WORKDIR}/build"
XILINX_RELEASE_VERSION ?= ""
-ATF_VERSION ?= "1.4"
+ATF_VERSION ?= "2.0"
ATF_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}"
PV = "${ATF_VERSION}${ATF_VERSION_EXTENSION}+git${SRCPV}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb
deleted file mode 100644
index 8c8a5d0..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2018.3.bb
+++ /dev/null
@@ -1,7 +0,0 @@
-ATF_VERSION = "1.5"
-XILINX_RELEASE_VERSION = "v2018.3"
-BRANCH ?= "master"
-SRCREV ?= "08560c36ea5b6f48b962cb4bd9a79b35bb3d95ce"
-
-include arm-trusted-firmware.inc
-
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb
new file mode 100644
index 0000000..64cbddc
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_2019.1.bb
@@ -0,0 +1,7 @@
+ATF_VERSION = "2.0"
+XILINX_RELEASE_VERSION = "v2019.1"
+BRANCH ?= "master"
+SRCREV ?= "80d1c79007fda42d4cc0be31b185a1da5799cd4d"
+
+include arm-trusted-firmware.inc
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb
similarity index 100%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2018.3.bb
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/reference-design/kc705-bitstream_2019.1.bb
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc
index 689249f..737f5f9 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx.inc
@@ -1,6 +1,6 @@
require recipes-bsp/u-boot/u-boot.inc
-DEPENDS += "bc-native dtc-native"
+DEPENDS += "bc-native dtc-native bison-native"
XILINX_RELEASE_VERSION ?= ""
UBOOT_VERSION_EXTENSION ?= "-xilinx-${XILINX_RELEASE_VERSION}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
similarity index 92%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
index ce8771f..7e25f87 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2018.3/microblaze-kc705-Convert-microblaze-generic-to-k.patch
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx/v2019.1/microblaze-kc705-Convert-microblaze-generic-to-k.patch
@@ -1,26 +1,25 @@
-From 539838b4fe4afecd9b6874c5ac397ab7f5b343d4 Mon Sep 17 00:00:00 2001
-From: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
-Date: Tue, 10 Apr 2018 18:34:45 -0700
+From afe880f500cff7a9486379c5ad7a4f3379015a62 Mon Sep 17 00:00:00 2001
+From: Jaewon Lee <jaewon.lee@xilinx.com>
+Date: Mon, 14 Jan 2019 11:30:56 -0800
Subject: [PATCH] kc705-microblazeel: Convert microblaze-generic to
kc705-microblazeel
This is an update to earlier kc705-trd patch done by Nathan Rossi.
-Starting from v2016.1, KC705 will no longer refer to deprecated KC705
-TRD application.
Change the microblaze-generic board to match the kc705-microblazeel.
This patch is not intended for upstream and serves as an intermediate
solution until OF support in upstream u-boot allows for easy support for
custom microblaze boards.
+Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Upstream-Status: Not-Upstreamable [meta-xilinx/kc705 specific]
---
arch/microblaze/dts/microblaze-generic.dts | 590 ++++++++++++++++++++++++++++-
- board/xilinx/microblaze-generic/config.mk | 30 +-
- configs/microblaze-generic_defconfig | 57 ++-
- include/configs/microblaze-generic.h | 396 ++++++++-----------
- 4 files changed, 782 insertions(+), 291 deletions(-)
+ board/xilinx/microblaze-generic/config.mk | 28 +-
+ configs/microblaze-generic_defconfig | 75 ++--
+ include/configs/microblaze-generic.h | 348 ++++++++---------
+ 4 files changed, 782 insertions(+), 259 deletions(-)
diff --git a/arch/microblaze/dts/microblaze-generic.dts b/arch/microblaze/dts/microblaze-generic.dts
index 08a1396..f8e616b 100644
@@ -621,17 +620,15 @@
+};
+
diff --git a/board/xilinx/microblaze-generic/config.mk b/board/xilinx/microblaze-generic/config.mk
-index 1dee2d6..cb75fde 100644
+index a953977..cb75fde 100644
--- a/board/xilinx/microblaze-generic/config.mk
+++ b/board/xilinx/microblaze-generic/config.mk
-@@ -1,20 +1,10 @@
+@@ -1,18 +1,10 @@
+-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2007 - 2016 Michal Simek
-#
-# Michal SIMEK <monstr@monstr.eu>
--#
--# SPDX-License-Identifier: GPL-2.0+
--#
-
-CPU_VER := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
-
@@ -653,24 +650,27 @@
+PLATFORM_CPPFLAGS += -mxl-pattern-compare
+PLATFORM_CPPFLAGS += -mxl-multiply-high
+PLATFORM_CPPFLAGS += -mno-xl-soft-mul
-+PLATFORM_CPPFLAGS += -mcpu=v10.0
++PLATFORM_CPPFLAGS += -mcpu=v11.0
+PLATFORM_CPPFLAGS += -fgnu89-inline
diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig
-index 08d99f2..bac6939 100644
+index 02e62e2..8d64be4 100644
--- a/configs/microblaze-generic_defconfig
+++ b/configs/microblaze-generic_defconfig
-@@ -1,5 +1,4 @@
+@@ -1,73 +1,58 @@
CONFIG_MICROBLAZE=y
-CONFIG_SYS_TEXT_BASE=0x29000000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
-@@ -8,50 +7,50 @@ CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+-CONFIG_SPL=y
+ CONFIG_TARGET_MICROBLAZE_GENERIC=y
+ CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+-CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_TEXT_BASE=0x80400000
- CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
++CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=-1
@@ -678,13 +678,14 @@
-CONFIG_BOOTARGS="root=romfs"
+CONFIG_BOOTDELAY=4
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
--CONFIG_SPL=y
+-CONFIG_DISPLAY_BOARDINFO=y
-CONFIG_SPL_BOARD_INIT=y
-CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_OS_BASE=0x2c060000
CONFIG_HUSH_PARSER=y
+-# CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PROMPT="U-Boot-mONStR> "
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_SPL=y
@@ -693,50 +694,65 @@
-CONFIG_CMD_GPIO=y
CONFIG_CMD_SAVES=y
# CONFIG_CMD_SETEXPR is not set
--CONFIG_CMD_TFTPPUT=y
+CONFIG_SYS_ENET=y
+CONFIG_NET=y
+CONFIG_NETDEVICES=y
+CONFIG_CMD_NET=y
CONFIG_CMD_DHCP=y
+-CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_NFS=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_JFFS2=y
-CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
--CONFIG_ENV_IS_IN_FLASH=y
+-CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic"
-CONFIG_NETCONSOLE=y
-CONFIG_SPL_DM=y
++CONFIG_DM_ETH=y
++CONFIG_SYS_MALLOC_F=y
++CONFIG_SYS_GENERIC_BOARD=y
++CONFIG_XILINX_AXIEMAC=y
++CONFIG_SYS_NS16550=y
++CONFIG_CMD_FLASH=y
++CONFIG_MTD_NOR_FLASH=y
++CONFIG_CMD_IMLS=y
++CONFIG_CMD_GPIO=y
+ CONFIG_DM_GPIO=y
+ CONFIG_XILINX_GPIO=y
+-CONFIG_LED=y
+-CONFIG_LED_GPIO=y
-CONFIG_MTD_NOR_FLASH=y
+-CONFIG_MTD_DEVICE=y
+-CONFIG_FLASH_CFI_DRIVER=y
+-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+-CONFIG_FLASH_CFI_MTD=y
+-CONFIG_SYS_FLASH_PROTECTION=y
+-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PHY_ATHEROS=y
-CONFIG_PHY_BROADCOM=y
-CONFIG_PHY_DAVICOM=y
-CONFIG_PHY_LXT=y
-CONFIG_PHY_MARVELL=y
--CONFIG_PHY_MICREL=y
--CONFIG_PHY_MICREL_KSZ90X1=y
--CONFIG_PHY_NATSEMI=y
--CONFIG_PHY_REALTEK=y
--CONFIG_PHY_VITESSE=y
- CONFIG_DM_ETH=y
-+CONFIG_SYS_MALLOC_F=y
-+CONFIG_SYS_GENERIC_BOARD=y
- CONFIG_XILINX_AXIEMAC=y
--CONFIG_XILINX_EMACLITE=y
- CONFIG_SYS_NS16550=y
--CONFIG_XILINX_UARTLITE=y
-+CONFIG_CMD_FLASH=y
-+CONFIG_MTD_NOR_FLASH=y
-+CONFIG_CMD_IMLS=y
-+CONFIG_CMD_GPIO=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_NETCONSOLE=y
+CONFIG_XILINX_FSL_LINKS=0
+CONFIG_PHY_GIGE=y
+CONFIG_ENV_IS_IN_FLASH=y
-+CONFIG_PHY_MICREL=y
-+CONFIG_PHY_MICREL_KSZ90X1=y
+ CONFIG_PHY_MICREL=y
+ CONFIG_PHY_MICREL_KSZ90X1=y
+-CONFIG_PHY_NATSEMI=y
+-CONFIG_PHY_REALTEK=y
+-CONFIG_PHY_VITESSE=y
+-CONFIG_DM_ETH=y
+-CONFIG_XILINX_AXIEMAC=y
+-CONFIG_XILINX_EMACLITE=y
+-CONFIG_SYS_NS16550=y
+-CONFIG_XILINX_UARTLITE=y
+-CONFIG_SYSRESET_GPIO=y
+-CONFIG_SYSRESET_MICROBLAZE=y
+-CONFIG_WDT=y
+-CONFIG_XILINX_TB_WATCHDOG=y
+CONFIG_SPL_DM_SERIAL=y
+CONFIG_SPL_OF_LIBFDT=y
+CONFIG_PHY_XILINX=y
@@ -745,16 +761,15 @@
+# CONFIG_BOOTARGS is not set
+# CONFIG_USE_BOOTARGS is not set
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
-index 16481cb..1377c5e 100644
+index ba0952c..fd1da2b 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
-@@ -1,254 +1,178 @@
+@@ -1,205 +1,173 @@
+-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2007-2010 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
-- *
-- * SPDX-License-Identifier: GPL-2.0+
- */
-
#ifndef __CONFIG_H
@@ -771,141 +786,10 @@
-#undef SPIFLASH
-#undef RAMENV /* hold environment in flash */
-#else
--#ifdef XILINX_SPI_FLASH_BASEADDR
--#undef FLASH
--#define SPIFLASH
--#undef RAMENV /* hold environment in flash */
--#else
-#undef FLASH
-#undef SPIFLASH
-#define RAMENV /* hold environment in RAM */
-#endif
--#endif
--
--/* uart */
--/* The following table includes the supported baudrates */
--# define CONFIG_SYS_BAUDRATE_TABLE \
-- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
--
--/* setting reset address */
--/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
--
--/* gpio */
--#ifdef XILINX_GPIO_BASEADDR
--# define CONFIG_XILINX_GPIO
--# define CONFIG_SYS_GPIO_0_ADDR XILINX_GPIO_BASEADDR
--#endif
--
--/* watchdog */
--#if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
--# define CONFIG_WATCHDOG_BASEADDR XILINX_WATCHDOG_BASEADDR
--# define CONFIG_WATCHDOG_IRQ XILINX_WATCHDOG_IRQ
--# ifndef CONFIG_SPL_BUILD
--# define CONFIG_HW_WATCHDOG
--# define CONFIG_XILINX_TB_WATCHDOG
--# endif
--#endif
--
--#define CONFIG_SYS_MALLOC_LEN 0xC0000
--
--/* Stack location before relocation */
--#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \
-- CONFIG_SYS_MALLOC_F_LEN)
--
--/*
-- * CFI flash memory layout - Example
-- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
-- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
-- *
-- * SECT_SIZE = 0x20000; 128kB is one sector
-- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
-- *
-- * 0x2200_0000 CONFIG_SYS_FLASH_BASE
-- * FREE 256kB
-- * 0x2204_0000 CONFIG_ENV_ADDR
-- * ENV_AREA 128kB
-- * 0x2206_0000
-- * FREE
-- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
-- *
-- */
--
--#ifdef FLASH
--# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
--# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
--# define CONFIG_SYS_FLASH_CFI 1
--# define CONFIG_FLASH_CFI_DRIVER 1
--/* ?empty sector */
--# define CONFIG_SYS_FLASH_EMPTY_INFO 1
--/* max number of memory banks */
--# define CONFIG_SYS_MAX_FLASH_BANKS 1
--/* max number of sectors on one chip */
--# define CONFIG_SYS_MAX_FLASH_SECT 512
--/* hardware flash protection */
--# define CONFIG_SYS_FLASH_PROTECTION
--/* use buffered writes (20x faster) */
--# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
--# ifdef RAMENV
--# define CONFIG_ENV_SIZE 0x1000
--# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--
--# else /* FLASH && !RAMENV */
--/* 128K(one sector) for env */
--# define CONFIG_ENV_SECT_SIZE 0x20000
--# define CONFIG_ENV_ADDR \
-- (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
--# define CONFIG_ENV_SIZE 0x20000
--# endif /* FLASH && !RAMBOOT */
--#else /* !FLASH */
--
--#ifdef SPIFLASH
--# define CONFIG_SYS_SPI_BASE XILINX_SPI_FLASH_BASEADDR
--# define CONFIG_SPI 1
--# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
--# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
--# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
--
--# ifdef RAMENV
--# define CONFIG_ENV_SIZE 0x1000
--# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--
--# else /* SPIFLASH && !RAMENV */
--# define CONFIG_ENV_SPI_MODE SPI_MODE_3
--# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
--# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
--/* 128K(two sectors) for env */
--# define CONFIG_ENV_SECT_SIZE 0x10000
--# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
--/* Warning: adjust the offset in respect of other flash content and size */
--# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
--# endif /* SPIFLASH && !RAMBOOT */
--#else /* !SPIFLASH */
--
--/* ENV in RAM */
--# define CONFIG_ENV_SIZE 0x1000
--# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
--#endif /* !SPIFLASH */
--#endif /* !FLASH */
--
--#if defined(XILINX_USE_ICACHE)
--# define CONFIG_ICACHE
--#else
--# undef CONFIG_ICACHE
--#endif
--
--#if defined(XILINX_USE_DCACHE)
--# define CONFIG_DCACHE
--#else
--# undef CONFIG_DCACHE
--#endif
--
--#ifndef XILINX_DCACHE_BYTE_SIZE
--#define XILINX_DCACHE_BYTE_SIZE 32768
--#endif
--
--/*
-- * BOOTP options
-- */
+#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/* processor - microblaze_0 */
@@ -957,11 +841,6 @@
+
+/* timer - axi_timer_0 */
+
-+/* gpio - reset_gpio */
-+#define XILINX_GPIO_BASEADDR 0x40000000
-+#define CONFIG_SYS_GPIO_0_ADDR 0x40000000
-+#define CONFIG_XILINX_GPIO
-+
+/* intc - microblaze_0_axi_intc */
+
+/* FPGA */
@@ -988,43 +867,150 @@
+
+/* BOOTP options */
+#define CONFIG_BOOTP_SERVERIP
- #define CONFIG_BOOTP_BOOTFILESIZE
- #define CONFIG_BOOTP_BOOTPATH
- #define CONFIG_BOOTP_GATEWAY
- #define CONFIG_BOOTP_HOSTNAME
++#define CONFIG_BOOTP_BOOTFILESIZE
++#define CONFIG_BOOTP_BOOTPATH
++#define CONFIG_BOOTP_GATEWAY
++#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_PXE
--#if defined(CONFIG_CMD_JFFS2)
--# define CONFIG_MTD_PARTITIONS
--#endif
+-/* uart */
+-/* The following table includes the supported baudrates */
+-# define CONFIG_SYS_BAUDRATE_TABLE \
+- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
--#if defined(CONFIG_CMD_UBI)
--# define CONFIG_MTD_PARTITIONS
--#endif
+-/* setting reset address */
+-/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
-
+-#define CONFIG_SYS_MALLOC_LEN 0xC0000
+-
+-/* Stack location before relocation */
+-#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_TEXT_BASE - \
+- CONFIG_SYS_MALLOC_F_LEN)
+-
+-/*
+- * CFI flash memory layout - Example
+- * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
+- * CONFIG_SYS_FLASH_SIZE = 0x0080_0000; 8MB
+- *
+- * SECT_SIZE = 0x20000; 128kB is one sector
+- * CONFIG_ENV_SIZE = SECT_SIZE; 128kB environment store
+- *
+- * 0x2200_0000 CONFIG_SYS_FLASH_BASE
+- * FREE 256kB
+- * 0x2204_0000 CONFIG_ENV_ADDR
+- * ENV_AREA 128kB
+- * 0x2206_0000
+- * FREE
+- * 0x2280_0000 CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
+- *
+- */
+-
+-#ifdef FLASH
+-# define CONFIG_SYS_FLASH_BASE XILINX_FLASH_START
+-# define CONFIG_SYS_FLASH_SIZE XILINX_FLASH_SIZE
+-/* ?empty sector */
+-# define CONFIG_SYS_FLASH_EMPTY_INFO 1
+-/* max number of memory banks */
+-# define CONFIG_SYS_MAX_FLASH_BANKS 1
+-/* max number of sectors on one chip */
+-# define CONFIG_SYS_MAX_FLASH_SECT 512
+-/* hardware flash protection */
+-/* use buffered writes (20x faster) */
+-# ifdef RAMENV
+-# define CONFIG_ENV_SIZE 0x1000
+-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+-
+-# else /* FLASH && !RAMENV */
+-/* 128K(one sector) for env */
+-# define CONFIG_ENV_SECT_SIZE 0x20000
+-# define CONFIG_ENV_ADDR \
+- (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+-# define CONFIG_ENV_SIZE 0x20000
+-# endif /* FLASH && !RAMBOOT */
+-#else /* !FLASH */
+-
+-#ifdef SPIFLASH
+-# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+-# define CONFIG_SF_DEFAULT_SPEED XILINX_SPI_FLASH_MAX_FREQ
+-# define CONFIG_SF_DEFAULT_CS XILINX_SPI_FLASH_CS
+-
+-# ifdef RAMENV
+-# define CONFIG_ENV_SIZE 0x1000
+-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+-
+-# else /* SPIFLASH && !RAMENV */
+-# define CONFIG_ENV_SPI_MODE SPI_MODE_3
+-# define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+-# define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
+-/* 128K(two sectors) for env */
+-# define CONFIG_ENV_SECT_SIZE 0x10000
+-# define CONFIG_ENV_SIZE (2 * CONFIG_ENV_SECT_SIZE)
+-/* Warning: adjust the offset in respect of other flash content and size */
+-# define CONFIG_ENV_OFFSET (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
+-# endif /* SPIFLASH && !RAMBOOT */
+-#else /* !SPIFLASH */
+-
+-/* ENV in RAM */
+-# define CONFIG_ENV_SIZE 0x1000
+-# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
+-#endif /* !SPIFLASH */
+-#endif /* !FLASH */
+-
+-#if defined(XILINX_USE_ICACHE)
+-# define CONFIG_ICACHE
+-#else
+-# undef CONFIG_ICACHE
+-#endif
++/*Command line configuration.*/
++#define CONFIG_CMDLINE_EDITING
++#define CONFIG_AUTO_COMPLETE
+
+-#if defined(XILINX_USE_DCACHE)
+-# define CONFIG_DCACHE
+-#else
+-# undef CONFIG_DCACHE
+-#endif
++/* Miscellaneous configurable options */
++#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */
++#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
++#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+-#ifndef XILINX_DCACHE_BYTE_SIZE
+-#define XILINX_DCACHE_BYTE_SIZE 32768
+-#endif
+
+-/*
+- * BOOTP options
+- */
+-#define CONFIG_BOOTP_BOOTFILESIZE
++/* Use the HUSH parser */
++#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
-#if defined(CONFIG_MTD_PARTITIONS)
-/* MTD partitions */
--#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
--#define CONFIG_FLASH_CFI_MTD
--
++#define CONFIG_ENV_VARS_UBOOT_CONFIG
++#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */
+
-/* default mtd partition table */
-#endif
--
++#define CONFIG_LMB
+
-/* size of console buffer */
-#define CONFIG_SYS_CBSIZE 512
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 15
--#define CONFIG_SYS_LONGHELP
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0
--
--#define CONFIG_HOSTNAME XILINX_BOARD_NAME
++/* FDT support */
++#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+-#define CONFIG_HOSTNAME "microblaze-generic"
-#define CONFIG_BOOTCOMMAND "base 0;tftp 11000000 image.img;bootm"
--
--/* architecture dependent code */
+
+ /* architecture dependent code */
-#define CONFIG_SYS_USR_EXCEP /* user exception */
-
-#define CONFIG_PREBOOT "echo U-BOOT for ${hostname};setenv preboot;echo"
@@ -1041,66 +1027,8 @@
- "setenv stdin serial\0"
-#endif
-
-+/*Command line configuration.*/
- #define CONFIG_CMDLINE_EDITING
-+#define CONFIG_AUTO_COMPLETE
-
-/* Enable flat device tree support */
-#define CONFIG_LMB 1
--
--#if defined(CONFIG_XILINX_AXIEMAC)
--# define CONFIG_MII 1
--# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
--#else
--# undef CONFIG_MII
--#endif
--
--/* SPL part */
--#define CONFIG_SPL_FRAMEWORK
-+/* Miscellaneous configurable options */
-+#define CONFIG_SYS_CBSIZE 2048/* Console I/O Buffer Size */
-+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
--#ifdef CONFIG_SYS_FLASH_BASE
--# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
--#endif
--
--/* for booting directly linux */
-
--#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
-- 0x40000)
--#define CONFIG_SYS_FDT_SIZE (16<<10)
--#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
-- 0x1000000)
-+/* Use the HUSH parser */
-+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
--/* SP location before relocation, must use scratch RAM */
--/* BRAM start */
--#define CONFIG_SYS_INIT_RAM_ADDR 0x0
--/* BRAM size - will be generated */
--#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
-+#define CONFIG_ENV_VARS_UBOOT_CONFIG
-+#define CONFIG_ENV_OVERWRITE /* Allow to overwrite the u-boot environment variables */
-
--# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
-- CONFIG_SYS_INIT_RAM_SIZE - \
-- CONFIG_SYS_MALLOC_F_LEN)
-+#define CONFIG_LMB
-
--/* Just for sure that there is a space for stack */
--#define CONFIG_SPL_STACK_SIZE 0x100
-+/* FDT support */
-+#define CONFIG_DISPLAY_BOARDINFO_LATE
-
--#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
-
--#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
-- CONFIG_SYS_INIT_RAM_ADDR - \
-- CONFIG_SYS_MALLOC_F_LEN - \
-- CONFIG_SPL_STACK_SIZE)
-+/* architecture dependent code */
+#define CONFIG_SYS_USR_EXCEP /* user exception */
+#define CONFIG_SYS_HZ 1000
+
@@ -1161,8 +1089,45 @@
+/* BOOTCOMMAND */
+#define CONFIG_BOOTCOMMAND "run default_bootcmd"
+-#if defined(CONFIG_XILINX_AXIEMAC)
+-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1
+ #endif
+-
+-/* SPL part */
+-
+-#ifdef CONFIG_SYS_FLASH_BASE
+-# define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_FLASH_BASE
+-#endif
+-
+-/* for booting directly linux */
+-
+-#define CONFIG_SYS_FDT_BASE (CONFIG_SYS_FLASH_BASE + \
+- 0x40000)
+-#define CONFIG_SYS_FDT_SIZE (16 << 10)
+-#define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_TEXT_BASE + \
+- 0x1000000)
+-
+-/* SP location before relocation, must use scratch RAM */
+-/* BRAM start */
+-#define CONFIG_SYS_INIT_RAM_ADDR 0x0
+-/* BRAM size - will be generated */
+-#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
+-
+-# define CONFIG_SPL_STACK_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+- CONFIG_SYS_INIT_RAM_SIZE - \
+- CONFIG_SYS_MALLOC_F_LEN)
+-
+-/* Just for sure that there is a space for stack */
+-#define CONFIG_SPL_STACK_SIZE 0x100
+-
+-#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
+-
+-#define CONFIG_SPL_MAX_FOOTPRINT (CONFIG_SYS_INIT_RAM_SIZE - \
+- CONFIG_SYS_INIT_RAM_ADDR - \
+- CONFIG_SYS_MALLOC_F_LEN - \
+- CONFIG_SPL_STACK_SIZE)
+-
-#endif /* __CONFIG_H */
-+#endif
--
-2.7.4
+2.7.5
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb
similarity index 76%
rename from meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
rename to meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb
index c87672e..3377635 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.3.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2019.1.bb
@@ -1,9 +1,9 @@
-UBOOT_VERSION = "v2018.01"
-XILINX_RELEASE_VERSION = "v2018.3"
+UBOOT_VERSION = "v2019.01"
+XILINX_RELEASE_VERSION = "v2019.1"
UBRANCH ?= "master"
-SRCREV ?= "d8fc4b3b70bccf1577dab69f6ddfd4ada9a93bac"
+SRCREV ?= "d895ac5e94815d4b45dcf09d4752c5c2334a51db"
include u-boot-xlnx.inc
include u-boot-spl-zynq-init.inc
@@ -11,7 +11,7 @@
SRC_URI_append_kc705-microblazeel = " file://microblaze-kc705-Convert-microblaze-generic-to-k.patch"
LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://README;beginline=1;endline=6;md5=157ab8408beab40cd8ce1dc69f702a6c"
+LIC_FILES_CHKSUM = "file://README;beginline=1;endline=4;md5=744e7e3bb0c94b4b9f6b3db3bf893897"
# u-boot-xlnx has support for these
HAS_PLATFORM_INIT ?= " \
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb
new file mode 100644
index 0000000..d2eedd5
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.bb
@@ -0,0 +1,81 @@
+SUMMARY = "U-boot boot scripts for Xilinx devices"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+
+DEPENDS = "u-boot-mkimage-native"
+
+inherit deploy nopackages
+
+INHIBIT_DEFAULT_DEPS = "1"
+
+COMPATIBLE_MACHINE ?= "^$"
+COMPATIBLE_MACHINE_zynqmp = "zynqmp"
+COMPATIBLE_MACHINE_zynq = "zynq"
+COMPATIBLE_MACHINE_versal = "versal"
+
+KERNELDT = "${@os.path.basename(d.getVar('KERNEL_DEVICETREE').split(' ')[0]) if d.getVar('KERNEL_DEVICETREE') else ''}"
+DEVICE_TREE_NAME ?= "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/dtb', 'device-tree', 'system.dtb', d.getVar('KERNELDT'), d)}"
+#Need to copy a rootfs.cpio.gz.u-boot as uramdisk.image.gz into boot partition
+RAMDISK_IMAGE ?= ""
+RAMDISK_IMAGE_zynq ?= "uramdisk.image.gz"
+
+KERNEL_BOOTCMD_zynqmp ?= "booti"
+KERNEL_BOOTCMD_zynq ?= "bootm"
+KERNEL_BOOTCMD_versal ?= "booti"
+
+BOOTMODE ?= "sd"
+BOOTMODE_versal ?= "qspi"
+
+SRC_URI = " \
+ file://boot.cmd.sd.zynq \
+ file://boot.cmd.sd.zynqmp \
+ file://boot.cmd.qspi.versal \
+ file://pxeboot.pxe \
+ "
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+UBOOTSCR_BASE_NAME ?= "${PN}-${PKGE}-${PKGV}-${PKGR}-${DATETIME}"
+UBOOTSCR_BASE_NAME[vardepsexclude] = "DATETIME"
+UBOOTPXE_CONFIG ?= "pxelinux.cfg"
+UBOOTPXE_CONFIG_NAME = "${UBOOTPXE_CONFIG}-${DATETIME}"
+UBOOTPXE_CONFIG_NAME[vardepsexclude] = "DATETIME"
+
+DEVICETREE_ADDRESS_zynqmp ?= "0x4000000"
+DEVICETREE_ADDRESS_zynq ?= "0x2000000"
+DEVICETREE_ADDRESS_versal ?= "0x1000"
+KERNEL_LOAD_ADDRESS_zynqmp ?= "0x80000"
+KERNEL_LOAD_ADDRESS_zynq ?= "0x2080000"
+KERNEL_LOAD_ADDRESS_versal ?= "0x80000"
+
+RAMDISK_IMAGE_ADDRESS_zynq ?= "0x4000000"
+RAMDISK_IMAGE_ADDRESS_versal ?= "0x6000000"
+
+do_configure[noexec] = "1"
+do_install[noexec] = "1"
+
+do_compile() {
+ sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
+ -e 's/@@KERNEL_LOAD_ADDRESS@@/${KERNEL_LOAD_ADDRESS}/' \
+ -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \
+ -e 's/@@DEVICETREE_ADDRESS@@/${DEVICETREE_ADDRESS}/' \
+ -e 's/@@RAMDISK_IMAGE@@/${RAMDISK_IMAGE}/' \
+ -e 's/@@RAMDISK_IMAGE_ADDRESS@@/${RAMDISK_IMAGE_ADDRESS}/' \
+ -e 's/@@KERNEL_BOOTCMD@@/${KERNEL_BOOTCMD}/' \
+ "${WORKDIR}/boot.cmd.${BOOTMODE}.${SOC_FAMILY}" > "${WORKDIR}/boot.cmd"
+ mkimage -A arm -T script -C none -n "Boot script" -d "${WORKDIR}/boot.cmd" boot.scr
+ sed -e 's/@@KERNEL_IMAGETYPE@@/${KERNEL_IMAGETYPE}/' \
+ -e 's/@@DEVICE_TREE_NAME@@/${DEVICE_TREE_NAME}/' \
+ "${WORKDIR}/pxeboot.pxe" > "pxeboot.pxe"
+}
+
+
+do_deploy() {
+ install -d ${DEPLOYDIR}
+ install -m 0644 boot.scr ${DEPLOYDIR}/${UBOOTSCR_BASE_NAME}.scr
+ ln -sf ${UBOOTSCR_BASE_NAME}.scr ${DEPLOYDIR}/boot.scr
+ install -d ${DEPLOYDIR}/pxeboot/${UBOOTPXE_CONFIG_NAME}
+ install -m 0644 pxeboot.pxe ${DEPLOYDIR}/pxeboot/${UBOOTPXE_CONFIG_NAME}/default
+ ln -sf pxeboot/${UBOOTPXE_CONFIG_NAME} ${DEPLOYDIR}/${UBOOTPXE_CONFIG}
+}
+
+addtask do_deploy after do_compile before do_build
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi
new file mode 100644
index 0000000..84a25d2
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi
@@ -0,0 +1 @@
+booti 0x80000 0x6000000 0x1000
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal
new file mode 100644
index 0000000..d56b7c8
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.qspi.versal
@@ -0,0 +1 @@
+@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd
new file mode 100644
index 0000000..67a8057
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd
@@ -0,0 +1,6 @@
+setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused
+devicetree_image=@@DEVICE_TREE_NAME@@
+fatload mmc 0 ${fdt_addr_r} ${devicetree_image}
+fatload mmc $sdbootdev:$partid ${kernel_addr_r} @@KERNEL_IMAGETYPE@@
+booti ${kernel_addr_r} - ${fdt_addr_r}
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq
new file mode 100644
index 0000000..f593ab4
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynq
@@ -0,0 +1,4 @@
+fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@
+fatload mmc 0 @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@
+fatload mmc 0 @@RAMDISK_IMAGE_ADDRESS@@ @@RAMDISK_IMAGE@@
+@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ @@RAMDISK_IMAGE_ADDRESS@@ @@DEVICETREE_ADDRESS@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp
new file mode 100644
index 0000000..18f82d7
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/boot.cmd.sd.zynqmp
@@ -0,0 +1,4 @@
+setenv bootargs $bootargs root=/dev/mmcblk0p2 rw rootwait earlycon clk_ignore_unused
+fatload mmc 0 @@DEVICETREE_ADDRESS@@ @@DEVICE_TREE_NAME@@
+fatload mmc $sdbootdev:$partid @@KERNEL_LOAD_ADDRESS@@ @@KERNEL_IMAGETYPE@@
+@@KERNEL_BOOTCMD@@ @@KERNEL_LOAD_ADDRESS@@ - @@DEVICETREE_ADDRESS@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe
new file mode 100644
index 0000000..6d7a0a9
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr/pxeboot.pxe
@@ -0,0 +1,3 @@
+LABEL Linux
+KERNEL @@KERNEL_IMAGETYPE@@
+FDT @@DEVICE_TREE_NAME@@
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2018.3.bb
deleted file mode 100644
index 6f8eda2..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2018.3.bb
+++ /dev/null
@@ -1,6 +0,0 @@
-require qemu-devicetrees.inc
-
-XILINX_RELEASE_VERSION = "v2018.3"
-
-BRANCH ?= "master"
-SRCREV ?= "e3e40b8829894a479c7d7380fc8137886645dda8"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2019.1.bb
new file mode 100644
index 0000000..0648166
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-devicetrees_2019.1.bb
@@ -0,0 +1,6 @@
+require qemu-devicetrees.inc
+
+XILINX_RELEASE_VERSION = "v2019.1"
+
+BRANCH ?= "branch/xilinx-v2019.1"
+SRCREV ?= "445406ef4d06303f00387f7d81e8718255336fd0"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2018.3.bb
deleted file mode 100644
index 57547df..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2018.3.bb
+++ /dev/null
@@ -1,6 +0,0 @@
-require qemu-xilinx.inc
-
-XILINX_RELEASE_VERSION = "v2018.3"
-XILINX_QEMU_VERSION ?= "v2.11.0"
-BRANCH ?= "master"
-SRCREV ?= "f70bd86859c7a1a075ac864b4765168f821f1aae"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2019.1.bb
new file mode 100644
index 0000000..2dcf35b
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-devtools/qemu/qemu-xilinx_2019.1.bb
@@ -0,0 +1,6 @@
+require qemu-xilinx.inc
+
+XILINX_RELEASE_VERSION = "v2019.1"
+XILINX_QEMU_VERSION ?= "v2.11.1"
+BRANCH ?= "branch/xilinx-v2019.1"
+SRCREV ?= "5f38ea92fb697b94ad43f01fe162f3ed6e6b0e16"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc
index 5de6c9c..54ec3f2 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx.inc
@@ -17,6 +17,7 @@
require linux-microblaze.inc
DESCRIPTION = "Xilinx Kernel"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
EXTKERNELSRC = "${@'1' if d.getVar('EXTERNALSRC') else ''}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2018.3.bb b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2018.3.bb
deleted file mode 100644
index ade13e3..0000000
--- a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2018.3.bb
+++ /dev/null
@@ -1,7 +0,0 @@
-LINUX_VERSION = "4.14"
-XILINX_RELEASE_VERSION = "v2018.3"
-KBRANCH ?= "xlnx_rebase_v4.14"
-SRCREV ?= "eeab73d1207d6fc2082776c954eb19fd7290bfbe"
-
-include linux-xlnx.inc
-
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb
new file mode 100644
index 0000000..5bac31e
--- /dev/null
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/linux-xlnx_2019.1.bb
@@ -0,0 +1,7 @@
+LINUX_VERSION = "4.19"
+XILINX_RELEASE_VERSION = "v2019.1"
+KBRANCH ?= "xlnx_rebase_v4.19"
+SRCREV ?= "9811303824b66a8db9a8ec61b570879336a9fde5"
+
+include linux-xlnx.inc
+
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg
index bf7f316..ef6fd6a 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-kernel/linux/xilinx-kmeta/bsp/kc705-microblazeel/kc705-microblazeel.cfg
@@ -7,7 +7,7 @@
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=0
-CONFIG_XILINX_MICROBLAZE0_HW_VER="10.0"
+CONFIG_XILINX_MICROBLAZE0_HW_VER="11.0"
# Memory Base Address
CONFIG_KERNEL_BASE_ADDR=0x80000000
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb
index 8d1380f..3c13c69 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/kernel-module-vcu.bb
@@ -5,14 +5,14 @@
LIC_FILES_CHKSUM = "file://LICENSE.md;md5=eb723b61539feef013de476e68b5c50a"
XILINX_VCU_VERSION = "1.0.0"
-XILINX_RELEASE_VERSION = "2018.3"
+XILINX_RELEASE_VERSION = "v2019.1"
PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}"
S = "${WORKDIR}/git"
-BRANCH ?= "master"
+BRANCH ?= "master-rel-2019.1"
REPO ?= "git://github.com/xilinx/vcu-modules.git;protocol=https"
-SRCREV ?= "f6a9093ec32ee97a2df065aee8b8e676c2024f01"
+SRCREV ?= "13a8e5b3f614d94081481a808aa8d4bd00b26d76"
BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}"
SRC_URI = "${REPO};${BRANCHARG}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb
index 18fa032..25bbffe 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libomxil-xlnx.bb
@@ -4,12 +4,12 @@
LIC_FILES_CHKSUM = "file://LICENSE.md;md5=03a7aef7e6f6a76a59fd9b8ba450b493"
XILINX_VCU_VERSION = "1.0.0"
-XILINX_RELEASE_VERSION = "2018.3"
+XILINX_RELEASE_VERSION = "v2019.1"
PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}"
-BRANCH ?= "master"
+BRANCH ?= "master-rel-2019.1"
REPO ?= "git://github.com/xilinx/vcu-omx-il.git;protocol=https"
-SRCREV ?= "cf4b031ac88c7889e4f29ac7fc8ca7592bf12144"
+SRCREV ?= "b93cec02cd5da223fa965073dce130a08ffd6419"
BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}"
SRC_URI = "${REPO};${BRANCHARG}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb
index b068aa8..8f8c0ef 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/libvcu-xlnx.bb
@@ -4,12 +4,12 @@
LIC_FILES_CHKSUM = "file://LICENSE.md;md5=03a7aef7e6f6a76a59fd9b8ba450b493"
XILINX_VCU_VERSION = "1.0.0"
-XILINX_RELEASE_VERSION = "2018.3"
+XILINX_RELEASE_VERSION = "v2019.1"
PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}"
-BRANCH ?= "master"
+BRANCH ?= "master-rel-2019.1"
REPO ?= "git://github.com/xilinx/vcu-ctrl-sw.git;protocol=https"
-SRCREV ?= "1cb5281d319ea4f3c0eb5514864c80d95e78fe6e"
+SRCREV ?= "32b7be620987283f62e4469185da81dddad1071c"
BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}"
SRC_URI = "${REPO};${BRANCHARG}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb
index da447fc..28bd0d3 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-multimedia/vcu/vcu-firmware.bb
@@ -4,14 +4,14 @@
LIC_FILES_CHKSUM = "file://LICENSE;md5=63b45903a9a50120df488435f03cf498"
XILINX_VCU_VERSION = "1.0.0"
-XILINX_RELEASE_VERSION = "2018.3"
+XILINX_RELEASE_VERSION = "v2019.1"
PV = "${XILINX_VCU_VERSION}-xilinx-${XILINX_RELEASE_VERSION}+git${SRCPV}"
S = "${WORKDIR}/git"
-BRANCH ?= "master"
+BRANCH ?= "master-rel-2019.1"
REPO ?= "git://github.com/xilinx/vcu-firmware.git;protocol=https"
-SRCREV ?= "d01951905e1aedb179d838a6b86016f34e2f4966"
+SRCREV ?= "4078b74d16e5eccca5ae3132c3877d3aff7fb168"
BRANCHARG = "${@['nobranch=1', 'branch=${BRANCH}'][d.getVar('BRANCH', True) != '']}"
SRC_URI = "${REPO};${BRANCHARG}"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb b/meta-xilinx/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb
index d91f3b8..4bb41b7 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-xrt/xrt/xrt_git.bb
@@ -7,10 +7,10 @@
file://runtime_src/driver/xclng/xrt/user_gem/LICENSE;md5=3b83ef96387f14655fc854ddc3c6bd57 \
file://runtime_src/driver/xclng/tools/xbutil/LICENSE;md5=d273d63619c9aeaf15cdaf76422c4f87"
-SRC_URI = "git://github.com/Xilinx/XRT.git;protocol=https"
+SRC_URI = "git://github.com/Xilinx/XRT.git;protocol=https;nobranch=1"
PV = "2.2.0+git${SRCPV}"
-SRCREV = "69a7e181d8d53c3b5dde9e8f17ace790141eaa01"
+SRCREV = "da87ac894a037d7e11c0496361458efed4bab438"
S = "${WORKDIR}/git/src"
diff --git a/meta-xilinx/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb b/meta-xilinx/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb
index de437a1..b47f45f 100644
--- a/meta-xilinx/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb
+++ b/meta-xilinx/meta-xilinx-bsp/recipes-xrt/zocl/zocl_git.bb
@@ -7,7 +7,7 @@
SRC_URI = "git://github.com/Xilinx/XRT.git;protocol=https"
PV = "2.2.0+git${SRCPV}"
-SRCREV = "69a7e181d8d53c3b5dde9e8f17ace790141eaa01"
+SRCREV = "da87ac894a037d7e11c0496361458efed4bab438"
S = "${WORKDIR}/git/src/runtime_src/driver/zynq/drm/zocl"