diff --git a/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor.bb b/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor.bb
deleted file mode 100644
index 79d7a3d..0000000
--- a/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor.bb
+++ /dev/null
@@ -1,23 +0,0 @@
-SUMMARY = "Ampere Computing LLC Fault Monitor"
-DESCRIPTION = "Monitor fault events and update fault led status for Ampere systems"
-PR = "r1"
-
-LICENSE = "Apache-2.0"
-
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
-
-inherit systemd
-inherit obmc-phosphor-systemd
-
-FILESEXTRAPATHS:append := "${THISDIR}/${PN}:"
-
-SYSTEMD_SERVICE:${PN} = "ampere-fault-monitor.service"
-
-GPIO_FAULT_START_TGT = "ampere-check-gpio-fault@.service"
-GPIO_FAULT_START_S0_INSTMPL = "ampere-check-gpio-fault@{0}.service"
-SYSTEMD_SERVICE:${PN} += "${GPIO_FAULT_START_TGT}"
-
-HOST_ON_STARTMIN_TGTFMT = "obmc-host-startmin@{0}.target"
-GPIO_FAULT_START_S0_STARTMIN_FMT = "../${GPIO_FAULT_START_TGT}:${HOST_ON_STARTMIN_TGTFMT}.wants/${GPIO_FAULT_START_S0_INSTMPL}"
-SYSTEMD_LINK:${PN} += "${@compose_list_zip(d, 'GPIO_FAULT_START_S0_STARTMIN_FMT', 'OBMC_HOST_INSTANCES')}"
-
diff --git a/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor/ampere-check-gpio-fault@.service b/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor/ampere-check-gpio-fault@.service
deleted file mode 100644
index 8502b73..0000000
--- a/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor/ampere-check-gpio-fault@.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Monitor GPIO fault and updade fault LED status %i
-Before=obmc-host-start-pre@0.target
-After=obmc-host-already-on@0.target
-Conflicts=obmc-host-stop@0.target
-
-[Service]
-Restart=no
-ExecStart=/bin/sh -c "if [ -f /usr/sbin/ampere_check_gpio_fault.sh ]; then /usr/sbin/ampere_check_gpio_fault.sh %i; fi"
-ExecStopPost=/bin/sh -c "if [ -f /tmp/gpio_fault ]; then sleep 5; rm /tmp/gpio_fault; fi"
-SyslogIdentifier=ampere_check_fault_gpio
-Type=simple
diff --git a/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor/ampere-fault-monitor.service b/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor/ampere-fault-monitor.service
deleted file mode 100644
index ee6af1e..0000000
--- a/meta-ampere/meta-common/recipes-ampere/platform/ampere-fault-monitor/ampere-fault-monitor.service
+++ /dev/null
@@ -1,12 +0,0 @@
-[Unit]
-Description=Monitor fault events and updade fault LED status
-After=xyz.openbmc_project.State.Host@0.service
-
-[Service]
-Restart=on-failure
-ExecStart=/usr/sbin/ampere_fault_monitor.sh
-SyslogIdentifier=ampere_fault_monitor.sh
-Type=simple
-
-[Install]
-WantedBy={SYSTEMD_DEFAULT_TARGET}
diff --git a/meta-ampere/meta-common/recipes-phosphor/packagegroups/packagegroup-ampere-apps.bb b/meta-ampere/meta-common/recipes-phosphor/packagegroups/packagegroup-ampere-apps.bb
index b277659..afe33b7 100644
--- a/meta-ampere/meta-common/recipes-phosphor/packagegroups/packagegroup-ampere-apps.bb
+++ b/meta-ampere/meta-common/recipes-phosphor/packagegroups/packagegroup-ampere-apps.bb
@@ -34,7 +34,6 @@
 SUMMARY:${PN}-system = "Ampere System"
 RDEPENDS:${PN}-system = " \
         ampere-hostctrl \
-        ampere-fault-monitor \
         "
 
 SUMMARY:${PN}-flash = "Ampere Flash"
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/ampere-fault-monitor.bbappend b/meta-ampere/meta-jade/recipes-ampere/platform/ampere-fault-monitor.bbappend
deleted file mode 100644
index 38cb4c6..0000000
--- a/meta-ampere/meta-jade/recipes-ampere/platform/ampere-fault-monitor.bbappend
+++ /dev/null
@@ -1,12 +0,0 @@
-FILESEXTRAPATHS:append := "${THISDIR}/${PN}:"
-
-RDEPENDS:${PN} = "bash"
-
-SRC_URI += " \
-            file://ampere_fault_monitor.sh \
-           "
-
-do_install() {
-    install -d ${D}/${sbindir}
-    install -m 755 ${WORKDIR}/ampere_fault_monitor.sh ${D}/${sbindir}/
-}
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/ampere-fault-monitor/ampere_fault_monitor.sh b/meta-ampere/meta-jade/recipes-ampere/platform/ampere-fault-monitor/ampere_fault_monitor.sh
deleted file mode 100644
index 7e62eae..0000000
--- a/meta-ampere/meta-jade/recipes-ampere/platform/ampere-fault-monitor/ampere_fault_monitor.sh
+++ /dev/null
@@ -1,179 +0,0 @@
-#!/bin/bash
-
-# This script monitors fan, over-temperature, PSU, CPU/SCP failure and update fault LED status
-
-# shellcheck disable=SC2004
-# shellcheck disable=SC2046
-
-# common variables
-	warning_fault_flag='/tmp/fault_warning'
-	error_fault_flag='/tmp/fault_err'
-	overtemp_fault_flag='/tmp/fault_overtemp'
-	fault_RAS_UE_flag='/tmp/fault_RAS_UE'
-
-	blink_rate=100000
-
-	fault="false"
-
-	on="true"
-	off="false"
-
-	gpio_fault="false"
-
-# fan variables
-	fan_failed="false"
-	fan_failed_flag='/tmp/fan_failed'
-
-# PSU variables
-	psu_failed="false"
-	psu_bus=6
-	psu0_addr=0x58
-	psu1_addr=0x59
-	status_word_cmd=0x79
-	# Following the PMBus Specification
-	# Bit[1]: CML faults
-	# Bit[2]: Over temperature faults
-	# Bit[3]: Under voltage faults
-	# Bit[4]: Over current faults
-	# Bit[5]: Over voltage fault
-	# Bit[10]: Fan faults
-	psu_fault_bitmask=0x43e
-
-# led variables
-	led_service='xyz.openbmc_project.LED.GroupManager'
-	led_fault_path='/xyz/openbmc_project/led/groups/system_fault'
-	led_fault_interface='xyz.openbmc_project.Led.Group'
-	fault_led_status=$off
-
-# functions declaration
-check_fan_failed() {
-	if [[ -f $fan_failed_flag ]]; then
-		fan_failed="true"
-	else
-		fan_failed="false"
-	fi
-}
-
-turn_on_off_fault_led() {
-	busctl set-property $led_service $led_fault_path $led_fault_interface Asserted b "$1" >> /dev/null
-}
-
-check_psu_failed() {
-	local psu0_presence
-	local psu1_presence
-	local psu0_value
-	local psu1_value
-
-	psu0_presence=$(gpioget $(gpiofind presence-ps0))
-	psu0_failed="true"
-	if [ "$psu0_presence" == "0" ]; then
-		# PSU0 presence, monitor the PSUs using pmbus, check the STATUS_WORD
-		psu0_value=$(i2cget -f -y $psu_bus $psu0_addr $status_word_cmd w)
-		psu0_bit_fault=$(($psu0_value & $psu_fault_bitmask))
-		if [ "$psu0_bit_fault" == "0" ]; then
-			psu0_failed="false"
-		fi
-	fi
-
-	psu1_presence=$(gpioget $(gpiofind presence-ps1))
-	psu1_failed="true"
-	if [ "$psu1_presence" == "0" ]; then
-		# PSU1 presence, monitor the PSUs using pmbus, check the STATUS_WORD
-		psu1_value=$(i2cget -f -y $psu_bus $psu1_addr $status_word_cmd w)
-		psu1_bit_fault=$(($psu1_value & $psu_fault_bitmask))
-		if [ "$psu1_bit_fault" == "0" ]; then
-			psu1_failed="false"
-		fi
-	fi
-
-	if [ "$psu0_failed" == "true" ] || [ "$psu1_failed" == "true" ]; then
-		psu_failed="true"
-	else
-		psu_failed="false"
-	fi
-}
-
-check_fault() {
-	if [[ "$fan_failed" == "true" ]] || [[ "$psu_failed" == "true" ]] \
-									|| [[ "$gpio_fault" == "true" ]] \
-									|| [[ "$RAS_UE_occured" == "true" ]] \
-									|| [[ "$overtemp_occured" == "true" ]]; then
-		fault="true"
-	else
-		fault="false"
-	fi
-}
-
-control_fault_led() {
-	if [ "$fault" == "true" ]; then
-		if [ "$fault_led_status" == $off ]; then
-			turn_on_off_fault_led $on
-			fault_led_status=$on
-		fi
-	else
-		if [ "$fault_led_status" == $on ]; then
-			turn_on_off_fault_led $off
-			fault_led_status=$off
-		fi
-	fi
-}
-
-blink_fault_led() {
-	if [ "$fault_led_status" == $off ]; then
-		turn_on_off_fault_led $on
-		usleep $blink_rate
-		turn_on_off_fault_led $off
-	else
-		turn_on_off_fault_led $off
-		usleep $blink_rate
-		turn_on_off_fault_led $on
-	fi
-}
-
-check_gpio_fault() {
-	if [[ -f $error_fault_flag ]]; then
-		gpio_fault="true"
-	else
-		if [ -f $warning_fault_flag ]; then
-			blink_fault_led
-			rm $warning_fault_flag
-		fi
-		gpio_fault="false"
-	fi
-}
-
-check_RAS_UE_occured() {
-	if [[ -f $fault_RAS_UE_flag ]]; then
-		echo "RAS UE error occured, turn on fault LED"
-		RAS_UE_occured="true"
-	else
-		RAS_UE_occured="false"
-	fi
-}
-
-check_overtemp_occured() {
-	if [[ -f $overtemp_fault_flag ]]; then
-		echo "Over temperature occured, turn on fault LED"
-		overtemp_occured="true"
-	else
-		overtemp_occured="false"
-	fi
-}
-
-# daemon start
-while true
-do
-	check_gpio_fault
-	check_fan_failed
-	check_overtemp_occured
-	check_RAS_UE_occured
-
-	# Monitors PSU presence
-	check_psu_failed
-
-	check_fault
-	control_fault_led
-	sleep 2
-done
-
-exit 1
diff --git a/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-fault-monitor.bbappend b/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-fault-monitor.bbappend
deleted file mode 100644
index 38cb4c6..0000000
--- a/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-fault-monitor.bbappend
+++ /dev/null
@@ -1,12 +0,0 @@
-FILESEXTRAPATHS:append := "${THISDIR}/${PN}:"
-
-RDEPENDS:${PN} = "bash"
-
-SRC_URI += " \
-            file://ampere_fault_monitor.sh \
-           "
-
-do_install() {
-    install -d ${D}/${sbindir}
-    install -m 755 ${WORKDIR}/ampere_fault_monitor.sh ${D}/${sbindir}/
-}
diff --git a/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-fault-monitor/ampere_fault_monitor.sh b/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-fault-monitor/ampere_fault_monitor.sh
deleted file mode 100644
index b1cf785..0000000
--- a/meta-ampere/meta-mitchell/recipes-ampere/platform/ampere-fault-monitor/ampere_fault_monitor.sh
+++ /dev/null
@@ -1,216 +0,0 @@
-#!/bin/bash
-# This script monitors fan, over-temperature, PSU, CPU/SCP failure and update fault LED status
-
-# shellcheck disable=SC2046
-
-# common variables
-	on=1
-	off=0
-
-    overtemp_fault_flag='/tmp/fault_overtemp'
-
-# gpio fault
-	gpio_fault="false"
-	gpio_fault_flag="/tmp/gpio_fault"
-
-# fan variables
-	fan_failed="false"
-	fan_failed_flag='/tmp/fan_failed'
-
-# PSU variables
-	psu_failed="false"
-	psu_bus=2
-	psu0_addr=0x58
-	psu1_addr=0x59
-	status_word_cmd=0x79
-	# Following the PMBus Specification
-	# Bit[1]: CML faults
-	# Bit[2]: Over temperature faults
-	# Bit[3]: Under voltage faults
-	# Bit[4]: Over current faults
-	# Bit[5]: Over voltage fault
-	# Bit[10]: Fan faults
-	psu_fault_bitmask=0x43e
-
-# led variables
-	fan_fault_led_status=$off
-	psu_fault_led_status=$off
-	led_bus=15
-	led_addr=0x22
-	led_port0_config=0x06
-	led_port0_output=0x02
-
-# functions declaration
-check_fan_failed() {
-	if [[ -f $fan_failed_flag ]]; then
-		fan_failed="true"
-	else
-		fan_failed="false"
-	fi
-}
-
-turn_on_off_fan_fault_led() {
-	# Control fan fault led via CPLD's I2C at slave address 0x22, I2C16.
-	# Get Port0 value
-	p0_val=$(i2cget -f -y $led_bus $led_addr $led_port0_config)
-	p0_val=$(("$p0_val" & ~1))
-	# Config CPLD's IOepx Port0[0] from input to output, clear IOepx Port0[0].
-	i2cset -f -y $led_bus $led_addr $led_port0_config $p0_val
-
-	# Get led value
-	led_st=$(i2cget -f -y $led_bus $led_addr $led_port0_output)
-
-	if [ "$1" == $on ]; then
-		led_st=$(("$led_st" | 1))
-	else
-		led_st=$(("$led_st" & ~1))
-	fi
-
-	# Turn on/off fan fault led
-	i2cset -f -y $led_bus $led_addr $led_port0_output $led_st
-}
-
-turn_on_off_psu_fault_led() {
-	# Control psu fault led via CPLD's I2C at slave address 0x22, I2C16.
-	# Get Port1 value
-	p1_val=$(i2cget -f -y $led_bus $led_addr $led_port0_config)
-	p1_val=$(("$p1_val" & ~2))
-	# Config CPLD's IOepx Port0[1] from input to output, clear IOepx Port0[1].
-	i2cset -f -y $led_bus $led_addr $led_port0_config $p1_val
-
-	# Get led value
-	led_st=$(i2cget -f -y $led_bus $led_addr $led_port0_output)
-	if [ "$1" == $on ]; then
-		led_st=$(("$led_st" | 2))
-	else
-		led_st=$(("$led_st" & ~2))
-	fi
-
-	# Turn on/off psu fault led
-	i2cset -f -y $led_bus $led_addr $led_port0_output $led_st
-}
-
-control_fan_fault_led() {
-	if [ "$fan_failed" == "true" ]; then
-		if [ "$fan_fault_led_status" == $off ]; then
-			turn_on_off_fan_fault_led $on
-			fan_fault_led_status=$on
-		fi
-	else
-		if [ "$fan_fault_led_status" == $on ]; then
-			turn_on_off_fan_fault_led $off
-			fan_fault_led_status=$off
-		fi
-	fi
-}
-
-check_psu_failed() {
-	local psu0_presence
-	local psu1_presence
-	local psu0_value
-	local psu1_value
-
-	psu0_presence=$(gpioget $(gpiofind presence-ps0))
-	psu0_failed="true"
-	if [ "$psu0_presence" == "0" ]; then
-		# PSU0 presence, monitor the PSUs using pmbus, check the STATUS_WORD
-		psu0_value=$(i2cget -f -y $psu_bus $psu0_addr $status_word_cmd w)
-		psu0_bit_fault=$((psu0_value & psu_fault_bitmask))
-		if [ "$psu0_bit_fault" == "0" ]; then
-			psu0_failed="false"
-		fi
-	fi
-
-	psu1_presence=$(gpioget $(gpiofind presence-ps1))
-	psu1_failed="true"
-	if [ "$psu1_presence" == "0" ]; then
-		# PSU1 presence, monitor the PSUs using pmbus, check the STATUS_WORD
-		psu1_value=$(i2cget -f -y $psu_bus $psu1_addr $status_word_cmd w)
-		psu1_bit_fault=$((psu1_value & psu_fault_bitmask))
-		if [ "$psu1_bit_fault" == "0" ]; then
-			psu1_failed="false"
-		fi
-	fi
-
-	if [ "$psu0_failed" == "true" ] || [ "$psu1_failed" == "true" ]; then
-		psu_failed="true"
-	else
-		psu_failed="false"
-	fi
-}
-
-control_psu_fault_led() {
-	if [ "$psu_failed" == "true" ]; then
-		if [ "$psu_fault_led_status" == $off ]; then
-			turn_on_off_psu_fault_led $on
-			psu_fault_led_status=$on
-		fi
-	else
-		if [ "$psu_fault_led_status" == $on ]; then
-			turn_on_off_psu_fault_led $off
-			psu_fault_led_status=$off
-		fi
-	fi
-}
-
-check_overtemp_occured() {
-    if [[ -f $overtemp_fault_flag ]]; then
-        echo "Over temperature occured, turn on fault LED"
-        overtemp_occured="true"
-    else
-        overtemp_occured="false"
-    fi
-}
-
-
-check_gpio_fault() {
-    if [[ -f $gpio_fault_flag ]]; then
-        echo "GPIO fault event(s) occured, turn on fault LED"
-        gpio_fault="true"
-    else
-        gpio_fault="false"
-    fi
-}
-
-check_fault() {
-	if [[ "$fan_failed" == "true" ]] || [[ "$psu_failed" == "true" ]] \
-                                    || [[ "$overtemp_occured" == "true" ]] \
-                                    || [[ "$gpio_fault" == "true" ]]; then
-		fault="true"
-	else
-		fault="false"
-	fi
-}
-
-# The System Fault Led turns on upon the system error, update the System Fault Led
-# based on the Fan fault status and PSU fault status
-control_sys_fault_led() {
-	# Turn on/off the System Fault Led
-	if [ "$fault" == "true" ]; then
-		gpioset $(gpiofind led-fault)=1
-	else
-		gpioset $(gpiofind led-fault)=0
-	fi
-}
-
-# daemon start
-while true
-do
-	#  Monitors Fan speeds
-	check_fan_failed
-	# Monitors PSU presence
-	check_psu_failed
-
-	check_overtemp_occured
-	check_gpio_fault
-	# Check fault to update fail
-	check_fault
-	control_sys_fault_led
-
-	control_fan_fault_led
-	control_psu_fault_led
-
-	sleep 2
-done
-
-exit 1