linux-aspeed: Move to Linux v6.5
This moves the OpenBMC kernel to a v6.5 base for ASPEED.
The 6.5 kernel moved all 32-bit ARM device trees, so our BMC device
tress are now under an 'aspeed' subdirectory. This change means systems
must describe the KERNEL_DEVICETREE with the aspeed directory prefix.
There are 78 patches in the tree, with 40 of those patches not
yet queued for merging in v6.6.
The remaining out of tree patches include:
Andrew Jeffery (6):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
Cédric Le Goater (1):
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (16):
ARM: dts: aspeed: bonnell: Add reserved memory for TPM event log
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
soc: aspeed: xdma: Add trace events
i2c: core: Add mux root adapter operations
iio: si7020: Lock root adapter to wait for reset
eeprom: ee1004: Enable devices on multiple busses
dt-bindings: trivial-devices: Add Atmel AT30TSE004A serial eeprom
eeprom: ee1004: Add OF matching support
leds: pca955x: Refactor with helper functions and renaming
leds: pca955x: Use pointers to driver data rather than I2C client
leds: pca955x: Optimize probe led selection
leds: pca955x: Add HW blink support
leds: Ensure hardware blinking turns off when requested
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (14):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: aspeed: Add debugfs directory
ARM: soc: aspeed: Add secure boot controller support
dt-bindings: trivial-devices: Remove Infineon SLB9673 TPM
ARM: dts: nuvoton: npmc750-evb: Add default console
tpm: tis-i2c: Add more compatible strings
leds: pca955x: Revert "Remove the unused function pca95xx_num_led_regs()"
arm64: configs: Add Nuvoton NPCM defconfig
ARM: configs: aspeed: Add new FSI drivers
ARM: config: aspeed_g5: Enable SSIF BMC driver
ARM: config: aspeed: Remove FIRMWARE_MEMMAP
ARM: config: aspeed: Add Ampere SMPro drivers
ARM: config: Add openbmc defconfig
ARM: config: openbmc: Add HPE GPX and Nuvoton 7xx
Johannes Holland (1):
dt-bindings: tpm: Add schema for TIS I2C devices
Potin Lai (1):
mtd: spi-nor: winbond: Add support for w25q01jvq
Change-Id: Ib97af192391af6e71c96fe14e12cfc88c23d7a7d
Signed-off-by: Joel Stanley <joel@jms.id.au>
diff --git a/meta-yadro/meta-nicole/conf/machine/nicole.conf b/meta-yadro/meta-nicole/conf/machine/nicole.conf
index fc4c487..6093972 100644
--- a/meta-yadro/meta-nicole/conf/machine/nicole.conf
+++ b/meta-yadro/meta-nicole/conf/machine/nicole.conf
@@ -1,5 +1,5 @@
KMACHINE = "aspeed"
-KERNEL_DEVICETREE = "${KMACHINE}-bmc-opp-${MACHINE}.dtb"
+KERNEL_DEVICETREE = "aspeed/${KMACHINE}-bmc-opp-${MACHINE}.dtb"
PREFERRED_PROVIDER_virtual/bootloader = "u-boot-aspeed"
PREFERRED_PROVIDER_u-boot = "u-boot-aspeed"