diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb
index 184d643..159ccdd 100644
--- a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb
@@ -6,13 +6,17 @@
 
 SRC_URI = " \
           file://gpio-defs.sh \
+          file://gpio-lib.sh \
           file://ampere_power_util.sh \
+          file://ampere_host_check.sh \
           "
 
 RDEPENDS_${PN} = "bash"
 
 do_install() {
     install -d ${D}/usr/sbin
+    install -m 0755 ${WORKDIR}/gpio-lib.sh ${D}/${sbindir}/
     install -m 0755 ${WORKDIR}/gpio-defs.sh ${D}/${sbindir}/
     install -m 0755 ${WORKDIR}/ampere_power_util.sh ${D}/${sbindir}/
+    install -m 0755 ${WORKDIR}/ampere_host_check.sh ${D}/${sbindir}/
 }
\ No newline at end of file
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_host_check.sh b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_host_check.sh
new file mode 100644
index 0000000..9eeeeca
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_host_check.sh
@@ -0,0 +1,45 @@
+#!/bin/bash
+
+source /usr/sbin/gpio-defs.sh
+source /usr/sbin/gpio-lib.sh
+
+host_status() {
+    st=$(busctl get-property xyz.openbmc_project.State.Host /xyz/openbmc_project/state/host0 xyz.openbmc_project.State.Host CurrentHostState | cut -d"." -f6)
+    if [ "$st" == "Running\"" ]; then
+        echo "on"
+    else
+        echo "off"
+    fi
+}
+
+createFile=$1
+setState=$2
+
+if [ $(host_status) == "on" ]; then
+    exit 0
+fi
+
+# Time out to check S0_FW_BOOT_OK is 60 seconds
+cnt=60
+val=0
+while [ $cnt -gt 0 ];
+do
+    val=$(gpio_get_val $S0_CPU_FW_BOOT_OK)
+    cnt=$((cnt - 1))
+    echo "$cnt S0_CPU_FW_BOOT_OK = $val"
+    if [ $val == 1 ]; then
+        # Sleep 5 second before the host is ready
+        sleep 5
+        if [ $createFile == 1 ]; then
+            if [ ! -d "/run/openbmc" ]; then
+                mkdir -p /run/openbmc
+            fi
+            echo "Creating /run/openbmc/host@0-on"
+            touch /run/openbmc/host@0-on
+        fi
+        exit 0
+    fi
+    sleep 1
+done
+
+exit 1
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/gpio-lib.sh b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/gpio-lib.sh
new file mode 100644
index 0000000..fcc2d54
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/gpio-lib.sh
@@ -0,0 +1,30 @@
+#!/bin/bash
+
+function gpio_number() {
+	GPIO_BASE=$(cat /sys/class/gpio/gpio*/base)
+	echo $((${GPIO_BASE} + $1))
+}
+
+# Configure GPIO as output and set its value
+function gpio_configure_output() {
+	gpioId=$(gpio_number $1)
+	echo $gpioId > /sys/class/gpio/export
+	echo out > /sys/class/gpio/gpio${gpioId}/direction
+	echo $2 > /sys/class/gpio/gpio${gpioId}/value
+	echo $gpioId > /sys/class/gpio/unexport
+}
+
+function gpio_get_val() {
+	gpioId=$(gpio_number $1)
+	echo $gpioId > /sys/class/gpio/export
+	echo $(cat /sys/class/gpio/gpio$gpioId/value)
+	echo $gpioId > /sys/class/gpio/unexport
+}
+
+# Configure GPIO as input
+function gpio_configure_input() {
+	gpioId=$(gpio_number $1)
+	echo $gpioId > /sys/class/gpio/export
+	echo "in" > /sys/class/gpio/gpio${gpioId}/direction
+	echo $gpioId > /sys/class/gpio/unexport
+}