commit | 9c56965c2b91fa63112da1d5241bf5db2ed7449b | [log] [tgz] |
---|---|---|
author | Joel Stanley <joel@jms.id.au> | Fri Jan 29 08:49:25 2021 +1030 |
committer | Joel Stanley <joel@jms.id.au> | Sat Jan 30 01:34:52 2021 +0000 |
tree | d0e28ea3380a00ce43cc849f27ecbe94f2230d9f | |
parent | 987fcc7c0eec3e5565df56c49e63d23f40856438 [diff] |
u-boot-aspeed: SHA512 backport and FIT bugfixes These patches bring SHA512 support to the FIT in u-boot, SPL and mkimage. The majority of the feature comes in with "Add support for SHA384 and SHA512", while the rest are relevant bugfixes that have been made to master since v2019.04. There is not yet a change to the configuration to enable the new algorithm and therefore only a minor image size change (an increase of 247 bytes due to "image: Check hash-nodes when checking configurations"). Harald Seiler (1): common: hash: Remove a debug printf statement Heinrich Schuchardt (1): image-fit: fit_check_format check for valid FDT Joel Stanley (1): ast2600: spl: Include RAM loader in BL2 ifdef Patrick Doyle (1): rsa: reject images with unknown padding Reuben Dowle (1): Add support for SHA384 and SHA512 Simon Glass (3): image: Be a little more verbose when checking signatures image: Return an error message from fit_config_verify_sig() image: Check hash-nodes when checking configurations Change-Id: I69d7ac29d8c4d710c57fc6a45b1c48022e6808c0 Signed-off-by: Joel Stanley <joel@jms.id.au>
The OpenBMC project can be described as a Linux distribution for embedded devices that have a BMC; typically, but not limited to, things like servers, top of rack switches or RAID appliances. The OpenBMC stack uses technologies such as Yocto, OpenEmbedded, systemd, and D-Bus to allow easy customization for your server platform.
sudo apt-get install -y git build-essential libsdl1.2-dev texinfo gawk chrpath diffstat
sudo dnf install -y git patch diffstat texinfo chrpath SDL-devel bitbake \ rpcgen perl-Thread-Queue perl-bignum perl-Crypt-OpenSSL-Bignum sudo dnf groupinstall "C Development Tools and Libraries"
git clone git@github.com:openbmc/openbmc.git cd openbmc
Any build requires an environment set up according to your hardware target. There is a special script in the root of this repository that can be used to configure the environment as needed. The script is called setup
and takes the name of your hardware target as an argument.
The script needs to be sourced while in the top directory of the OpenBMC repository clone, and, if run without arguments, will display the list of supported hardware targets, see the following example:
$ . setup <machine> [build_dir] Target machine must be specified. Use one of: centriq2400-rep nicole stardragon4800-rep2 f0b olympus swift fp5280g2 olympus-nuvoton tiogapass gsj on5263m5 vesnin hr630 palmetto witherspoon hr855xg2 qemuarm witherspoon-128 lanyang quanta-q71l witherspoon-tacoma mihawk rainier yosemitev2 msn romulus zaius neptune s2600wf
Once you know the target (e.g. romulus), source the setup
script as follows:
. setup romulus build
For evb-ast2500, please use the below command to specify the machine config, because the machine in meta-aspeed
layer is in a BSP layer and does not build the openbmc image.
TEMPLATECONF=meta-evb/meta-evb-aspeed/meta-evb-ast2500/conf . openbmc-env
bitbake obmc-phosphor-image
Additional details can be found in the docs repository.
The OpenBMC community maintains a set of tutorials new users can go through to get up to speed on OpenBMC development out here
Commits submitted by members of the OpenBMC GitHub community are compiled and tested via our Jenkins server. Commits are run through two levels of testing. At the repository level the makefile make check
directive is run. At the system level, the commit is built into a firmware image and run with an arm-softmmu QEMU model against a barrage of CI tests.
Commits submitted by non-members do not automatically proceed through CI testing. After visual inspection of the commit, a CI run can be manually performed by the reviewer.
Automated testing against the QEMU model along with supported systems are performed. The OpenBMC project uses the Robot Framework for all automation. Our complete test repository can be found here.
Support of additional hardware and software packages is always welcome. Please follow the contributing guidelines when making a submission. It is expected that contributions contain test cases.
Issues are managed on GitHub. It is recommended you search through the issues before opening a new one.
First, please do a search on the internet. There's a good chance your question has already been asked.
For general questions, please use the openbmc tag on Stack Overflow. Please review the discussion on Stack Overflow licensing before posting any code.
For technical discussions, please see contact info below for Discord and mailing list information. Please don't file an issue to ask a question. You'll get faster results by using the mailing list or Discord.
Feature List
Features In Progress
Features Requested but need help
Dive deeper into OpenBMC by opening the docs repository.
The Technical Steering Committee (TSC) guides the project. Members are: