diff --git a/poky/documentation/dev-manual/bmaptool.rst b/poky/documentation/dev-manual/bmaptool.rst
index 9add72c..f6f0e6a 100644
--- a/poky/documentation/dev-manual/bmaptool.rst
+++ b/poky/documentation/dev-manual/bmaptool.rst
@@ -4,10 +4,10 @@
 **********************************
 
 A fast and easy way to flash an image to a bootable device is to use
-Bmaptool, which is integrated into the OpenEmbedded build system.
-Bmaptool is a generic tool that creates a file's block map (bmap) and
+bmaptool, which is integrated into the OpenEmbedded build system.
+bmaptool is a generic tool that creates a file's block map (bmap) and
 then uses that map to copy the file. As compared to traditional tools
-such as dd or cp, Bmaptool can copy (or flash) large files like raw
+such as dd or cp, bmaptool can copy (or flash) large files like raw
 system image files much faster.
 
 .. note::
@@ -20,13 +20,13 @@
          $ sudo apt install bmap-tools
 
    -  If you are unable to install the ``bmap-tools`` package, you will
-      need to build Bmaptool before using it. Use the following command::
+      need to build bmaptool before using it. Use the following command::
 
-         $ bitbake bmap-tools-native
+         $ bitbake bmaptool-native
 
 Following, is an example that shows how to flash a Wic image. Realize
-that while this example uses a Wic image, you can use Bmaptool to flash
-any type of image. Use these steps to flash an image using Bmaptool:
+that while this example uses a Wic image, you can use bmaptool to flash
+any type of image. Use these steps to flash an image using bmaptool:
 
 #. *Update your local.conf File:* You need to have the following set
    in your ``local.conf`` file before building your image::
@@ -39,19 +39,19 @@
 
       $ bitbake image
 
-#. *Flash the Device:* Flash the device with the image by using Bmaptool
+#. *Flash the Device:* Flash the device with the image by using bmaptool
    depending on your particular setup. The following commands assume the
    image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
 
    -  If you have write access to the media, use this command form::
 
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
    -  If you do not have write access to the media, set your permissions
       first and then use the same command form::
 
          $ sudo chmod 666 /dev/sdX
-         $ oe-run-native bmap-tools-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
+         $ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
 
 For help on the ``bmaptool`` command, use the following command::