u-boot-aspeed: Rebase on SDK v00.04.11
This moves OpenBMC to the latest SDK from Aspeed.
Note that a series of fixes were sent to Aspeed on top of the SDK
release to ensure the OpenBMC configuration continued to work. These
changes have been merged by Aspeed but do not appear in a SDK tag at
this stage. Also sent to Aspeed were some of the changes from the
OpenBMC branch.
Changes from Aspeed's new SDK:
Billy Tsai (1):
gpio: aspeed: Fix incorrect offset of read back register.
Chia-Wei Wang (3):
Merge branch pull request #10 into aspeed-dev-v2019.04
arm: aspeed: ast2600: Remove ASPEED_LOADERS
configs: aspeed: Remove legacy defconfig
Chin-Ting Kuo (10):
dts: aspeed: Create a device tree for DC-SCM solution
dts: aspeed: Add ast2600-dcscm device tree
spi-nor: Porting for S25HL series
dts: aspeed: DC-SCM early bring up
spi: aspeed: Fix bug when using 2Gb flash
dts: aspeed: dc-scm: Add support for external mux
spi_nor: Support s25hl without SFDP
mtd: spi: Support Gigadevice device with 64KB sector size
dts: aspeed: dc-scm: Extend bus-width to 4 for SPI1
spi-nor: Add fast read command for S25HL series flash support
Dylan Hung (5):
cmd/aspeed/nettest: apply addtional delay for RTL8211F
dts: aspeed: enable mac1 for ast2600-dcscm
cmd: aspeed: nettest: fix driving strength setting
cmd: aspeed: support ctrl+c to break dramtest loop
ram: aspeed: add AST2600 ODT configuration
Eddie James (2):
ARM: dts: aspeed: tacoma: Add eMMC nodes and parameters
ARM: dts: aspeed: rainier: Add eMMC nodes and parameters
George Hung (1):
ARM: dts: aspeed: add Quanta S6Q machine dts
Jammy Huang (11):
pinctrl: ast2600: Add support for secure-i2c
arm: dts: ast2600: Add definition for secure-i2c pinctrl
misc: dp: Support re-driver
misc: dp: Update dp-fw
misc: dp: Refine code
misc: dp: Update dp-fw
misc: dp: Fix black screen occasionally
misc: dp: Fix monitors black screen with 15m cable
misc: dp: Fix black screen occasionally
misc: dp: Improve compatibility
misc: dp: Improve compatibility
Joel Stanley (5):
ARM: dts: rainier: Enable ACRY and HACE
ARM: dts: tacoma: Enable ACRY and HACE
aspeed: Disable unused loaders, add STMICRO flash
aspeed: Sort dts files in makefile
as2600/scu: Fix printing of security info
Johnny Huang (4):
cmd: aspeed: otp: fix otp status polling
otp: update image checksum to SHA384
otp: add 'verify' sub-command
otp: add 'invalid' sub-command
Neal Liu (2):
arm: aspeed: ast2600: select USB2.0 device mode as default
arm: aspeed: ast2600: enable USB port B PHY clock
Peng Fan (1):
tools: imx image: fix write warning
Potin Lai (1):
ARM: dts: Aspeed: Add Bletchley dts
Tommy Huang (5):
cmd: aspeed: DP CTS command utility
cmd: aspeed: Update aspeed dptest default build config
cmd: dptest: Arrange tab align
cmd: aspeed: Fix the internal section compile fail
i2c: ast_i2c: Remove SCL direct drive mode
ryan_chen (4):
i2c:ast2600: add ast2600 new register mode driver
pcie:aspeed : update reset sequnce.
pcie:aspeed : fix two rc enable rc high config read timeout issue
pcie:aspeed : update perst sequence
Change-Id: I2b79d15f7016913cae3f2b1d9cf6ee143136aaf2
Signed-off-by: Joel Stanley <joel@jms.id.au>
diff --git a/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc b/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc
index 313bffd..1800fe6 100644
--- a/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc
+++ b/meta-aspeed/recipes-bsp/u-boot/u-boot-common-aspeed-sdk_2019.04.inc
@@ -10,7 +10,7 @@
# We use the revision in order to avoid having to fetch it from the
# repo during parse
-SRCREV = "a7c723fdd887cf1ac9202de518e9669c7cd09ed6"
+SRCREV = "634f526d1bd2561d96565e6464c459d3c7655454"
SRC_URI = "git://git@github.com/openbmc/u-boot.git;nobranch=1;protocol=https"
SRC_URI:append:uboot-flash-32768 = " file://u-boot_flash_32M.cfg"