diff --git a/meta-ampere/meta-common/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh b/meta-ampere/meta-common/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh
new file mode 100644
index 0000000..6976263
--- /dev/null
+++ b/meta-ampere/meta-common/recipes-phosphor/console/obmc-console/ampere_uartmux_ctrl.sh
@@ -0,0 +1,50 @@
+#!/bin/bash
+#
+# Ampere Computing LLC: UART MUX/DEMUX for CPU0 UART0,1,4 and CPU1 UART1
+# Usage: ampere_uartmux_ctrl.sh <CPU UART port number> <UARTx_MODE>
+#        <UARTx_MODE> of 1 sets CPU To HDR_CONN
+#        <UARTx_MODE> of 2 sets BMC to CPU (eg dropbear ssh server on port 2200)
+#
+# This can be called to set uart mux manually
+
+# shellcheck disable=SC2046
+
+if [ $# -lt 2 ]; then
+	exit 1
+fi
+
+case "$1" in
+	1) GPIO_UARTx_MODE0="uart1-mode0"
+		GPIO_UARTx_MODE1="uart1-mode1"
+	;;
+	2) GPIO_UARTx_MODE0="uart2-mode0"
+		GPIO_UARTx_MODE1="uart2-mode1"
+	;;
+	3) GPIO_UARTx_MODE0="uart3-mode0"
+		GPIO_UARTx_MODE1="uart3-mode1"
+	;;
+	4) GPIO_UARTx_MODE0="uart4-mode0"
+		GPIO_UARTx_MODE1="uart4-mode1"
+	;;
+	*) echo "Invalid UART port selection"
+		exit 1
+	;;
+esac
+
+echo "Ampere UART MUX CTRL UART port $1 to mode $2"
+
+case "$2" in
+	# To HDR
+	1) gpioset $(gpiofind "$GPIO_UARTx_MODE0")=1
+		gpioset $(gpiofind "$GPIO_UARTx_MODE1")=0
+		exit 0
+	;;
+	# To BMC
+	2) gpioset $(gpiofind "$GPIO_UARTx_MODE0")=0
+		gpioset $(gpiofind "$GPIO_UARTx_MODE1")=1
+		exit 0
+	;;
+	*) echo "Invalid UART mode selection"
+		exit 1
+	;;
+esac
diff --git a/meta-ampere/meta-common/recipes-phosphor/console/obmc-console/obmc-console@.service b/meta-ampere/meta-common/recipes-phosphor/console/obmc-console/obmc-console@.service
new file mode 100644
index 0000000..64d443f
--- /dev/null
+++ b/meta-ampere/meta-common/recipes-phosphor/console/obmc-console/obmc-console@.service
@@ -0,0 +1,10 @@
+[Unit]
+Description=%i Console Server
+ConditionPathExists=/etc/obmc-console/server.%i.conf
+
+[Service]
+# Instance ID is the VUART basename
+ExecStartPre=/usr/sbin/ampere_uart_console_setup.sh %i
+ExecStart=/usr/sbin/obmc-console-server --config /etc/obmc-console/server.%i.conf %i
+SyslogIdentifier=%i-console-server
+Restart=always
diff --git a/meta-ampere/meta-common/recipes-phosphor/console/obmc-console_%.bbappend b/meta-ampere/meta-common/recipes-phosphor/console/obmc-console_%.bbappend
new file mode 100644
index 0000000..dd857f2
--- /dev/null
+++ b/meta-ampere/meta-common/recipes-phosphor/console/obmc-console_%.bbappend
@@ -0,0 +1,27 @@
+FILESEXTRAPATHS:append := "${THISDIR}/${PN}:"
+RDEPENDS:${PN} += "bash"
+
+CONSOLE_CLIENT_SERVICE_FMT = "obmc-console-ssh@{0}.service"
+CONSOLE_SERVER_CONF_FMT = "file://server.{0}.conf"
+CONSOLE_CLIENT_CONF_FMT = "file://client.{0}.conf"
+
+SRC_URI += " \
+             file://ampere_uartmux_ctrl.sh \
+             file://obmc-console@.service \
+           "
+
+SYSTEMD_SERVICE:${PN}:remove = "obmc-console-ssh.socket"
+
+FILES:${PN}:remove = "${systemd_system_unitdir}/obmc-console-ssh@.service.d/use-socket.conf"
+
+PACKAGECONFIG:append = " concurrent-servers"
+
+do_install:append() {
+    # Script to switch host's uart muxes by GPIOs
+    install -d ${D}${sbindir}
+    install -m 0755 ${WORKDIR}/ampere_uartmux_ctrl.sh ${D}/${sbindir}
+
+    # Overriding service to call ampere_uart_console_setup.sh at ExecStartPre
+    install -d ${D}${systemd_system_unitdir}
+    install -m 0644 ${WORKDIR}/obmc-console@.service ${D}${systemd_system_unitdir}
+}