Squashed 'yocto-poky/' content from commit ea562de
git-subtree-dir: yocto-poky
git-subtree-split: ea562de57590c966cd5a75fda8defecd397e6436
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch
new file mode 100644
index 0000000..882674f
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch
@@ -0,0 +1,45 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From ef566a4d4f74022e1fdb0a2addfe81e6de9f4aae Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Wed, 29 Apr 2015 02:21:53 +0300
+Subject: [PATCH] AP WMM: Fix integer underflow in WMM Action frame parser
+
+The length of the WMM Action frame was not properly validated and the
+length of the information elements (int left) could end up being
+negative. This would result in reading significantly past the stack
+buffer while parsing the IEs in ieee802_11_parse_elems() and while doing
+so, resulting in segmentation fault.
+
+This can result in an invalid frame being used for a denial of service
+attack (hostapd process killed) against an AP with a driver that uses
+hostapd for management frame processing (e.g., all mac80211-based
+drivers).
+
+Thanks to Kostya Kortchinsky of Google security team for discovering and
+reporting this issue.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/ap/wmm.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/src/ap/wmm.c b/src/ap/wmm.c
+index 6d4177c..314e244 100644
+--- a/src/ap/wmm.c
++++ b/src/ap/wmm.c
+@@ -274,6 +274,9 @@ void hostapd_wmm_action(struct hostapd_data *hapd,
+ return;
+ }
+
++ if (left < 0)
++ return; /* not a valid WMM Action frame */
++
+ /* extract the tspec info element */
+ if (ieee802_11_parse_elems(pos, left, &elems, 1) == ParseFailed) {
+ hostapd_logger(hapd, mgmt->sa, HOSTAPD_MODULE_IEEE80211,
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch
new file mode 100644
index 0000000..a2bafc8
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch
@@ -0,0 +1,77 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From dd2f043c9c43d156494e33d7ce22db96e6ef42c7 Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Fri, 1 May 2015 16:37:45 +0300
+Subject: [PATCH 1/5] EAP-pwd peer: Fix payload length validation for Commit
+ and Confirm
+
+The length of the received Commit and Confirm message payloads was not
+checked before reading them. This could result in a buffer read
+overflow when processing an invalid message.
+
+Fix this by verifying that the payload is of expected length before
+processing it. In addition, enforce correct state transition sequence to
+make sure there is no unexpected behavior if receiving a Commit/Confirm
+message before the previous exchanges have been completed.
+
+Thanks to Kostya Kortchinsky of Google security team for discovering and
+reporting this issue.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/eap_peer/eap_pwd.c | 29 +++++++++++++++++++++++++++++
+ 1 file changed, 29 insertions(+)
+
+diff --git a/src/eap_peer/eap_pwd.c b/src/eap_peer/eap_pwd.c
+index f2b0926..a629437 100644
+--- a/src/eap_peer/eap_pwd.c
++++ b/src/eap_peer/eap_pwd.c
+@@ -355,6 +355,23 @@ eap_pwd_perform_commit_exchange(struct eap_sm *sm, struct eap_pwd_data *data,
+ BIGNUM *mask = NULL, *x = NULL, *y = NULL, *cofactor = NULL;
+ u16 offset;
+ u8 *ptr, *scalar = NULL, *element = NULL;
++ size_t prime_len, order_len;
++
++ if (data->state != PWD_Commit_Req) {
++ ret->ignore = TRUE;
++ goto fin;
++ }
++
++ prime_len = BN_num_bytes(data->grp->prime);
++ order_len = BN_num_bytes(data->grp->order);
++
++ if (payload_len != 2 * prime_len + order_len) {
++ wpa_printf(MSG_INFO,
++ "EAP-pwd: Unexpected Commit payload length %u (expected %u)",
++ (unsigned int) payload_len,
++ (unsigned int) (2 * prime_len + order_len));
++ goto fin;
++ }
+
+ if (((data->private_value = BN_new()) == NULL) ||
+ ((data->my_element = EC_POINT_new(data->grp->group)) == NULL) ||
+@@ -554,6 +571,18 @@ eap_pwd_perform_confirm_exchange(struct eap_sm *sm, struct eap_pwd_data *data,
+ u8 conf[SHA256_MAC_LEN], *cruft = NULL, *ptr;
+ int offset;
+
++ if (data->state != PWD_Confirm_Req) {
++ ret->ignore = TRUE;
++ goto fin;
++ }
++
++ if (payload_len != SHA256_MAC_LEN) {
++ wpa_printf(MSG_INFO,
++ "EAP-pwd: Unexpected Confirm payload length %u (expected %u)",
++ (unsigned int) payload_len, SHA256_MAC_LEN);
++ goto fin;
++ }
++
+ /*
+ * first build up the ciphersuite which is group | random_function |
+ * prf
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch
new file mode 100644
index 0000000..e108a93
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch
@@ -0,0 +1,47 @@
+From 9ed4eee345f85e3025c33c6e20aa25696e341ccd Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <jouni@qca.qualcomm.com>
+Date: Tue, 7 Apr 2015 11:32:11 +0300
+Subject: [PATCH] P2P: Validate SSID element length before copying it
+ (CVE-2015-1863)
+
+This fixes a possible memcpy overflow for P2P dev->oper_ssid in
+p2p_add_device(). The length provided by the peer device (0..255 bytes)
+was used without proper bounds checking and that could have resulted in
+arbitrary data of up to 223 bytes being written beyond the end of the
+dev->oper_ssid[] array (of which about 150 bytes would be beyond the
+heap allocation) when processing a corrupted management frame for P2P
+peer discovery purposes.
+
+This could result in corrupted state in heap, unexpected program
+behavior due to corrupted P2P peer device information, denial of service
+due to process crash, exposure of memory contents during GO Negotiation,
+and potentially arbitrary code execution.
+
+Thanks to Google security team for reporting this issue and smart
+hardware research group of Alibaba security team for discovering it.
+
+Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
+
+Upstream-Status: Backport
+
+Signed-off-by: Yue Tao <yue.tao@windriver.com>
+
+---
+ src/p2p/p2p.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/p2p/p2p.c b/src/p2p/p2p.c
+index f584fae..a45fe73 100644
+--- a/src/p2p/p2p.c
++++ b/src/p2p/p2p.c
+@@ -778,6 +778,7 @@ int p2p_add_device(struct p2p_data *p2p, const u8 *addr, int freq,
+ if (os_memcmp(addr, p2p_dev_addr, ETH_ALEN) != 0)
+ os_memcpy(dev->interface_addr, addr, ETH_ALEN);
+ if (msg.ssid &&
++ msg.ssid[1] <= sizeof(dev->oper_ssid) &&
+ (msg.ssid[1] != P2P_WILDCARD_SSID_LEN ||
+ os_memcmp(msg.ssid + 2, P2P_WILDCARD_SSID, P2P_WILDCARD_SSID_LEN)
+ != 0)) {
+--
+1.7.9.5
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch
new file mode 100644
index 0000000..2568ea1
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch
@@ -0,0 +1,53 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From 5acd23f4581da58683f3cf5e36cb71bbe4070bd7 Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Tue, 28 Apr 2015 17:08:33 +0300
+Subject: [PATCH] WPS: Fix HTTP chunked transfer encoding parser
+
+strtoul() return value may end up overflowing the int h->chunk_size and
+resulting in a negative value to be stored as the chunk_size. This could
+result in the following memcpy operation using a very large length
+argument which would result in a buffer overflow and segmentation fault.
+
+This could have been used to cause a denial service by any device that
+has been authorized for network access (either wireless or wired). This
+would affect both the WPS UPnP functionality in a WPS AP (hostapd with
+upnp_iface parameter set in the configuration) and WPS ER
+(wpa_supplicant with WPS_ER_START control interface command used).
+
+Validate the parsed chunk length value to avoid this. In addition to
+rejecting negative values, we can also reject chunk size that would be
+larger than the maximum configured body length.
+
+Thanks to Kostya Kortchinsky of Google security team for discovering and
+reporting this issue.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/wps/httpread.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/src/wps/httpread.c b/src/wps/httpread.c
+index 2f08f37..d2855e3 100644
+--- a/src/wps/httpread.c
++++ b/src/wps/httpread.c
+@@ -533,6 +533,13 @@ static void httpread_read_handler(int sd, void *eloop_ctx, void *sock_ctx)
+ if (!isxdigit(*cbp))
+ goto bad;
+ h->chunk_size = strtoul(cbp, NULL, 16);
++ if (h->chunk_size < 0 ||
++ h->chunk_size > h->max_bytes) {
++ wpa_printf(MSG_DEBUG,
++ "httpread: Invalid chunk size %d",
++ h->chunk_size);
++ goto bad;
++ }
+ /* throw away chunk header
+ * so we have only real data
+ */
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch
new file mode 100644
index 0000000..c477c2f
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch
@@ -0,0 +1,70 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From e28a58be26184c2a23f80b410e0997ef1bd5d578 Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Fri, 1 May 2015 16:40:44 +0300
+Subject: [PATCH 2/5] EAP-pwd server: Fix payload length validation for Commit
+ and Confirm
+
+The length of the received Commit and Confirm message payloads was not
+checked before reading them. This could result in a buffer read
+overflow when processing an invalid message.
+
+Fix this by verifying that the payload is of expected length before
+processing it. In addition, enforce correct state transition sequence to
+make sure there is no unexpected behavior if receiving a Commit/Confirm
+message before the previous exchanges have been completed.
+
+Thanks to Kostya Kortchinsky of Google security team for discovering and
+reporting this issue.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/eap_server/eap_server_pwd.c | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/src/eap_server/eap_server_pwd.c b/src/eap_server/eap_server_pwd.c
+index 66bd5d2..3189105 100644
+--- a/src/eap_server/eap_server_pwd.c
++++ b/src/eap_server/eap_server_pwd.c
+@@ -656,9 +656,21 @@ eap_pwd_process_commit_resp(struct eap_sm *sm, struct eap_pwd_data *data,
+ BIGNUM *x = NULL, *y = NULL, *cofactor = NULL;
+ EC_POINT *K = NULL, *point = NULL;
+ int res = 0;
++ size_t prime_len, order_len;
+
+ wpa_printf(MSG_DEBUG, "EAP-pwd: Received commit response");
+
++ prime_len = BN_num_bytes(data->grp->prime);
++ order_len = BN_num_bytes(data->grp->order);
++
++ if (payload_len != 2 * prime_len + order_len) {
++ wpa_printf(MSG_INFO,
++ "EAP-pwd: Unexpected Commit payload length %u (expected %u)",
++ (unsigned int) payload_len,
++ (unsigned int) (2 * prime_len + order_len));
++ goto fin;
++ }
++
+ if (((data->peer_scalar = BN_new()) == NULL) ||
+ ((data->k = BN_new()) == NULL) ||
+ ((cofactor = BN_new()) == NULL) ||
+@@ -774,6 +786,13 @@ eap_pwd_process_confirm_resp(struct eap_sm *sm, struct eap_pwd_data *data,
+ u8 conf[SHA256_MAC_LEN], *cruft = NULL, *ptr;
+ int offset;
+
++ if (payload_len != SHA256_MAC_LEN) {
++ wpa_printf(MSG_INFO,
++ "EAP-pwd: Unexpected Confirm payload length %u (expected %u)",
++ (unsigned int) payload_len, SHA256_MAC_LEN);
++ goto fin;
++ }
++
+ /* build up the ciphersuite: group | random_function | prf */
+ grp = htons(data->group_num);
+ ptr = (u8 *) &cs;
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch
new file mode 100644
index 0000000..e46ce43
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch
@@ -0,0 +1,56 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From 477c74395acd0123340457ba6f15ab345d42016e Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Sat, 2 May 2015 19:23:04 +0300
+Subject: [PATCH 3/5] EAP-pwd peer: Fix Total-Length parsing for fragment
+ reassembly
+
+The remaining number of bytes in the message could be smaller than the
+Total-Length field size, so the length needs to be explicitly checked
+prior to reading the field and decrementing the len variable. This could
+have resulted in the remaining length becoming negative and interpreted
+as a huge positive integer.
+
+In addition, check that there is no already started fragment in progress
+before allocating a new buffer for reassembling fragments. This avoid a
+potential memory leak when processing invalid message.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/eap_peer/eap_pwd.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/src/eap_peer/eap_pwd.c b/src/eap_peer/eap_pwd.c
+index a629437..1d2079b 100644
+--- a/src/eap_peer/eap_pwd.c
++++ b/src/eap_peer/eap_pwd.c
+@@ -866,11 +866,23 @@ eap_pwd_process(struct eap_sm *sm, void *priv, struct eap_method_ret *ret,
+ * if it's the first fragment there'll be a length field
+ */
+ if (EAP_PWD_GET_LENGTH_BIT(lm_exch)) {
++ if (len < 2) {
++ wpa_printf(MSG_DEBUG,
++ "EAP-pwd: Frame too short to contain Total-Length field");
++ ret->ignore = TRUE;
++ return NULL;
++ }
+ tot_len = WPA_GET_BE16(pos);
+ wpa_printf(MSG_DEBUG, "EAP-pwd: Incoming fragments whose "
+ "total length = %d", tot_len);
+ if (tot_len > 15000)
+ return NULL;
++ if (data->inbuf) {
++ wpa_printf(MSG_DEBUG,
++ "EAP-pwd: Unexpected new fragment start when previous fragment is still in use");
++ ret->ignore = TRUE;
++ return NULL;
++ }
+ data->inbuf = wpabuf_alloc(tot_len);
+ if (data->inbuf == NULL) {
+ wpa_printf(MSG_INFO, "Out of memory to buffer "
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch
new file mode 100644
index 0000000..a4c02b4
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch
@@ -0,0 +1,54 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From 3035cc2894e08319b905bd6561e8bddc8c2db9fa Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Sat, 2 May 2015 19:26:06 +0300
+Subject: [PATCH 4/5] EAP-pwd server: Fix Total-Length parsing for fragment
+ reassembly
+
+The remaining number of bytes in the message could be smaller than the
+Total-Length field size, so the length needs to be explicitly checked
+prior to reading the field and decrementing the len variable. This could
+have resulted in the remaining length becoming negative and interpreted
+as a huge positive integer.
+
+In addition, check that there is no already started fragment in progress
+before allocating a new buffer for reassembling fragments. This avoid a
+potential memory leak when processing invalid message.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/eap_server/eap_server_pwd.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/src/eap_server/eap_server_pwd.c b/src/eap_server/eap_server_pwd.c
+index 3189105..2bfc3c2 100644
+--- a/src/eap_server/eap_server_pwd.c
++++ b/src/eap_server/eap_server_pwd.c
+@@ -942,11 +942,21 @@ static void eap_pwd_process(struct eap_sm *sm, void *priv,
+ * the first fragment has a total length
+ */
+ if (EAP_PWD_GET_LENGTH_BIT(lm_exch)) {
++ if (len < 2) {
++ wpa_printf(MSG_DEBUG,
++ "EAP-pwd: Frame too short to contain Total-Length field");
++ return;
++ }
+ tot_len = WPA_GET_BE16(pos);
+ wpa_printf(MSG_DEBUG, "EAP-pwd: Incoming fragments, total "
+ "length = %d", tot_len);
+ if (tot_len > 15000)
+ return;
++ if (data->inbuf) {
++ wpa_printf(MSG_DEBUG,
++ "EAP-pwd: Unexpected new fragment start when previous fragment is still in use");
++ return;
++ }
+ data->inbuf = wpabuf_alloc(tot_len);
+ if (data->inbuf == NULL) {
+ wpa_printf(MSG_INFO, "EAP-pwd: Out of memory to "
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch
new file mode 100644
index 0000000..4073600
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch
@@ -0,0 +1,36 @@
+Upstream-Status: Backport
+
+Signed-off-by: Fan Xin <fan.xin@jp.fujitsu.com>
+
+From 28a069a545b06b99eb55ad53f63f2c99e65a98f6 Mon Sep 17 00:00:00 2001
+From: Jouni Malinen <j@w1.fi>
+Date: Sat, 2 May 2015 19:26:28 +0300
+Subject: [PATCH 5/5] EAP-pwd peer: Fix asymmetric fragmentation behavior
+
+The L (Length) and M (More) flags needs to be cleared before deciding
+whether the locally generated response requires fragmentation. This
+fixes an issue where these flags from the server could have been invalid
+for the following message. In some cases, this could have resulted in
+triggering the wpabuf security check that would terminate the process
+due to invalid buffer allocation.
+
+Signed-off-by: Jouni Malinen <j@w1.fi>
+---
+ src/eap_peer/eap_pwd.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/src/eap_peer/eap_pwd.c b/src/eap_peer/eap_pwd.c
+index 1d2079b..e58b13a 100644
+--- a/src/eap_peer/eap_pwd.c
++++ b/src/eap_peer/eap_pwd.c
+@@ -968,6 +968,7 @@ eap_pwd_process(struct eap_sm *sm, void *priv, struct eap_method_ret *ret,
+ /*
+ * we have output! Do we need to fragment it?
+ */
++ lm_exch = EAP_PWD_GET_EXCHANGE(lm_exch);
+ len = wpabuf_len(data->outbuf);
+ if ((len + EAP_PWD_HDR_SIZE) > data->mtu) {
+ resp = eap_msg_alloc(EAP_VENDOR_IETF, EAP_TYPE_PWD, data->mtu,
+--
+1.9.1
+
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant
new file mode 100644
index 0000000..6ff4dd8
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/99_wpa_supplicant
@@ -0,0 +1 @@
+d root root 0700 /var/run/wpa_supplicant none
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
new file mode 100644
index 0000000..f04e398
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig
@@ -0,0 +1,552 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+# -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+# Note: WEXT is deprecated in the current Linux kernel version and no new
+# functionality is added to it. nl80211-based interface is the new
+# replacement for WEXT and its use allows wpa_supplicant to properly control
+# the driver to improve existing functionality like roaming and to support new
+# functionality.
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# driver_nl80211.c requires libnl. If you are compiling it yourself
+# you may need to point hostapd to your version of libnl.
+#
+#CFLAGS += -I$<path to libnl include files>
+#LIBS += -L$<path to libnl library files>
+
+# Use libnl v2.0 (or 3.0) libraries.
+#CONFIG_LIBNL20=y
+
+# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
+CONFIG_LIBNL32=y
+
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
+# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
+# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-pwd (secure authentication using only a password)
+#CONFIG_EAP_PWD=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+CONFIG_WPS=y
+# Enable WSC 2.0 support
+#CONFIG_WPS2=y
+# Enable WPS external registrar functionality
+#CONFIG_WPS_ER=y
+# Disable credentials for an open network by default when acting as a WPS
+# registrar.
+#CONFIG_WPS_REG_DISABLE_OPEN=y
+# Enable WPS support with NFC config method
+#CONFIG_WPS_NFC=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# EAP-EKE
+#CONFIG_EAP_EKE=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
+#CONFIG_HT_OVERRIDES=y
+
+# Support VHT overrides (disable VHT, mask MCS rates, etc.)
+#CONFIG_VHT_OVERRIDES=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Include internal line edit mode in wpa_cli. This can be used as a replacement
+# for GNU Readline to provide limited command line editing and history support.
+#CONFIG_WPA_CLI_EDIT=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+# path is given on command line, not here; this option is just used to
+# select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+#CONFIG_ELOOP=eloop
+
+# Should we use poll instead of select? Select is used by default.
+#CONFIG_ELOOP_POLL=y
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection), also known as PMF
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+#CONFIG_TLS=openssl
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
+# can be enabled to get a stronger construction of messages when block ciphers
+# are used. It should be noted that some existing TLS v1.0 -based
+# implementation may not be compatible with TLS v1.1 message (ClientHello is
+# sent prior to negotiating which version will be used)
+#CONFIG_TLSV11=y
+
+# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
+# can be enabled to enable use of stronger crypto algorithms. It should be
+# noted that some existing TLS v1.0 -based implementation may not be compatible
+# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
+# will be used)
+#CONFIG_TLSV12=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Send debug messages to syslog instead of stdout
+#CONFIG_DEBUG_SYSLOG=y
+# Set syslog facility for debug messages
+#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+
+# Add support for sending all debug messages (regardless of debug verbosity)
+# to the Linux kernel tracing facility. This helps debug the entire stack by
+# making it easy to record everything happening from the driver up into the
+# same file, e.g., using trace-cmd.
+#CONFIG_DEBUG_LINUX_TRACING=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, uncomment these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, uncomment these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
+
+CONFIG_TLS = %ssl%
+CONFIG_CTRL_IFACE_DBUS=y
+CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# wpa_supplicant depends on strong random number generation being available
+# from the operating system. os_get_random() function is used to fetch random
+# data when needed, e.g., for key generation. On Linux and BSD systems, this
+# works by reading /dev/urandom. It should be noted that the OS entropy pool
+# needs to be properly initialized before wpa_supplicant is started. This is
+# important especially on embedded devices that do not have a hardware random
+# number generator and may by default start up with minimal entropy available
+# for random number generation.
+#
+# As a safety net, wpa_supplicant is by default trying to internally collect
+# additional entropy for generating random data to mix in with the data fetched
+# from the OS. This by itself is not considered to be very strong, but it may
+# help in cases where the system pool is not initialized properly. However, it
+# is very strongly recommended that the system pool is initialized with enough
+# entropy either by using hardware assisted random number generator or by
+# storing state over device reboots.
+#
+# wpa_supplicant can be configured to maintain its own entropy store over
+# restarts to enhance random number generation. This is not perfect, but it is
+# much more secure than using the same sequence of random numbers after every
+# reboot. This can be enabled with -e<entropy file> command line option. The
+# specified file needs to be readable and writable by wpa_supplicant.
+#
+# If the os_get_random() is known to provide strong random data (e.g., on
+# Linux/BSD, the board in question is known to have reliable source of random
+# data from /dev/urandom), the internal wpa_supplicant random pool can be
+# disabled. This will save some in binary size and CPU use. However, this
+# should only be considered for builds that are known to be used on devices
+# that meet the requirements described above.
+#CONFIG_NO_RANDOM_POOL=y
+
+# IEEE 802.11n (High Throughput) support (mainly for AP mode)
+#CONFIG_IEEE80211N=y
+
+# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
+# (depends on CONFIG_IEEE80211N)
+#CONFIG_IEEE80211AC=y
+
+# Wireless Network Management (IEEE Std 802.11v-2011)
+# Note: This is experimental and not complete implementation.
+#CONFIG_WNM=y
+
+# Interworking (IEEE 802.11u)
+# This can be used to enable functionality to improve interworking with
+# external networks (GAS/ANQP to learn more about the networks and network
+# selection based on available credentials).
+#CONFIG_INTERWORKING=y
+
+# Hotspot 2.0
+#CONFIG_HS20=y
+
+# Disable roaming in wpa_supplicant
+#CONFIG_NO_ROAMING=y
+
+# AP mode operations with wpa_supplicant
+# This can be used for controlling AP mode operations with wpa_supplicant. It
+# should be noted that this is mainly aimed at simple cases like
+# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
+# external RADIUS server can be supported with hostapd.
+CONFIG_AP=y
+
+CONFIG_BGSCAN_SIMPLE=y
+
+# P2P (Wi-Fi Direct)
+# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
+# more information on P2P operations.
+#CONFIG_P2P=y
+
+# Enable TDLS support
+#CONFIG_TDLS=y
+
+# Wi-Fi Direct
+# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# program to control the additional information exchanges in the messages.
+#CONFIG_WIFI_DISPLAY=y
+
+# Autoscan
+# This can be used to enable automatic scan support in wpa_supplicant.
+# See wpa_supplicant.conf for more information on autoscan usage.
+#
+# Enabling directly a module will enable autoscan support.
+# For exponential module:
+CONFIG_AUTOSCAN_EXPONENTIAL=y
+# For periodic module:
+#CONFIG_AUTOSCAN_PERIODIC=y
+
+# Password (and passphrase, etc.) backend for external storage
+# These optional mechanisms can be used to add support for storing passwords
+# and other secrets in external (to wpa_supplicant) location. This allows, for
+# example, operating system specific key storage to be used
+#
+# External password backend for testing purposes (developer use)
+#CONFIG_EXT_PASSWORD_TEST=y
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh
new file mode 100644
index 0000000..5c9e5d3
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa-supplicant.sh
@@ -0,0 +1,85 @@
+#!/bin/sh
+
+
+WPA_SUP_BIN="/usr/sbin/wpa_supplicant"
+WPA_SUP_PNAME="wpa_supplicant"
+WPA_SUP_PIDFILE="/var/run/wpa_supplicant.$IFACE.pid"
+WPA_SUP_OPTIONS="-B -P $WPA_SUP_PIDFILE -i $IFACE"
+
+VERBOSITY=0
+
+
+if [ -s "$IF_WPA_CONF" ]; then
+ WPA_SUP_CONF="-c $IF_WPA_CONF"
+else
+ exit 0
+fi
+
+if [ ! -x "$WPA_SUP_BIN" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: binaries not executable or missing from $WPA_SUP_BIN"
+ fi
+
+ exit 1
+fi
+
+if [ "$MODE" = "start" ] ; then
+ # driver type of interface, defaults to wext when undefined
+ if [ -s "/etc/wpa_supplicant/driver.$IFACE" ]; then
+ IF_WPA_DRIVER=$(cat "/etc/wpa_supplicant/driver.$IFACE")
+ elif [ -z "$IF_WPA_DRIVER" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: wpa-driver not provided, using \"wext\""
+ fi
+
+ IF_WPA_DRIVER="wext"
+ fi
+
+ # if we have passed the criteria, start wpa_supplicant
+ if [ -n "$WPA_SUP_CONF" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: $WPA_SUP_BIN $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER"
+ fi
+
+ start-stop-daemon --start --quiet \
+ --name $WPA_SUP_PNAME --startas $WPA_SUP_BIN --pidfile $WPA_SUP_PIDFILE \
+ -- $WPA_SUP_OPTIONS $WPA_SUP_CONF -D $IF_WPA_DRIVER
+ fi
+
+ # if the interface socket exists, then wpa_supplicant was invoked successfully
+ if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: ctrl_interface socket located at $WPA_COMMON_CTRL_IFACE/$IFACE"
+ fi
+
+ exit 0
+
+ fi
+
+elif [ "$MODE" = "stop" ]; then
+
+ if [ -f "$WPA_SUP_PIDFILE" ]; then
+
+ if [ "$VERBOSITY" = "1" ]; then
+ echo "$WPA_SUP_PNAME: terminating $WPA_SUP_PNAME daemon"
+ fi
+
+ start-stop-daemon --stop --quiet \
+ --name $WPA_SUP_PNAME --pidfile $WPA_SUP_PIDFILE
+
+ if [ -S "$WPA_COMMON_CTRL_IFACE/$IFACE" ]; then
+ rm -f $WPA_COMMON_CTRL_IFACE/$IFACE
+ fi
+
+ if [ -f "$WPA_SUP_PIDFILE" ]; then
+ rm -f $WPA_SUP_PIDFILE
+ fi
+ fi
+
+fi
+
+exit 0
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf
new file mode 100644
index 0000000..68258f5
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf
@@ -0,0 +1,690 @@
+##### Example wpa_supplicant configuration file ###############################
+#
+# This file describes configuration file format and lists all available option.
+# Please also take a look at simpler configuration examples in 'examples'
+# subdirectory.
+#
+# Empty lines and lines starting with # are ignored
+
+# NOTE! This file may contain password information and should probably be made
+# readable only by root user on multiuser systems.
+
+# Note: All file paths in this configuration file should use full (absolute,
+# not relative to working directory) path in order to allow working directory
+# to be changed. This can happen if wpa_supplicant is run in the background.
+
+# Whether to allow wpa_supplicant to update (overwrite) configuration
+#
+# This option can be used to allow wpa_supplicant to overwrite configuration
+# file whenever configuration is changed (e.g., new network block is added with
+# wpa_cli or wpa_gui, or a password is changed). This is required for
+# wpa_cli/wpa_gui to be able to store the configuration changes permanently.
+# Please note that overwriting configuration file will remove the comments from
+# it.
+#update_config=1
+
+# global configuration (shared by all network blocks)
+#
+# Parameters for the control interface. If this is specified, wpa_supplicant
+# will open a control interface that is available for external programs to
+# manage wpa_supplicant. The meaning of this string depends on which control
+# interface mechanism is used. For all cases, the existence of this parameter
+# in configuration is used to determine whether the control interface is
+# enabled.
+#
+# For UNIX domain sockets (default on Linux and BSD): This is a directory that
+# will be created for UNIX domain sockets for listening to requests from
+# external programs (CLI/GUI, etc.) for status information and configuration.
+# The socket file will be named based on the interface name, so multiple
+# wpa_supplicant processes can be run at the same time if more than one
+# interface is used.
+# /var/run/wpa_supplicant is the recommended directory for sockets and by
+# default, wpa_cli will use it when trying to connect with wpa_supplicant.
+#
+# Access control for the control interface can be configured by setting the
+# directory to allow only members of a group to use sockets. This way, it is
+# possible to run wpa_supplicant as root (since it needs to change network
+# configuration and open raw sockets) and still allow GUI/CLI components to be
+# run as non-root users. However, since the control interface can be used to
+# change the network configuration, this access needs to be protected in many
+# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you
+# want to allow non-root users to use the control interface, add a new group
+# and change this value to match with that group. Add users that should have
+# control interface access to this group. If this variable is commented out or
+# not included in the configuration file, group will not be changed from the
+# value it got by default when the directory or socket was created.
+#
+# When configuring both the directory and group, use following format:
+# DIR=/var/run/wpa_supplicant GROUP=wheel
+# DIR=/var/run/wpa_supplicant GROUP=0
+# (group can be either group name or gid)
+#
+# For UDP connections (default on Windows): The value will be ignored. This
+# variable is just used to select that the control interface is to be created.
+# The value can be set to, e.g., udp (ctrl_interface=udp)
+#
+# For Windows Named Pipe: This value can be used to set the security descriptor
+# for controlling access to the control interface. Security descriptor can be
+# set using Security Descriptor String Format (see http://msdn.microsoft.com/
+# library/default.asp?url=/library/en-us/secauthz/security/
+# security_descriptor_string_format.asp). The descriptor string needs to be
+# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty
+# DACL (which will reject all connections). See README-Windows.txt for more
+# information about SDDL string format.
+#
+ctrl_interface=/var/run/wpa_supplicant
+
+# IEEE 802.1X/EAPOL version
+# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines
+# EAPOL version 2. However, there are many APs that do not handle the new
+# version number correctly (they seem to drop the frames completely). In order
+# to make wpa_supplicant interoperate with these APs, the version number is set
+# to 1 by default. This configuration value can be used to set it to the new
+# version (2).
+eapol_version=1
+
+# AP scanning/selection
+# By default, wpa_supplicant requests driver to perform AP scanning and then
+# uses the scan results to select a suitable AP. Another alternative is to
+# allow the driver to take care of AP scanning and selection and use
+# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
+# information from the driver.
+# 1: wpa_supplicant initiates scanning and AP selection
+# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
+# parameters (e.g., WPA IE generation); this mode can also be used with
+# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
+# APs (i.e., external program needs to control association). This mode must
+# also be used when using wired Ethernet drivers.
+# 2: like 0, but associate with APs using security policy and SSID (but not
+# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
+# enable operation with hidden SSIDs and optimized roaming; in this mode,
+# the network blocks in the configuration file are tried one by one until
+# the driver reports successful association; each network block should have
+# explicit security policy (i.e., only one option in the lists) for
+# key_mgmt, pairwise, group, proto variables
+ap_scan=1
+
+# EAP fast re-authentication
+# By default, fast re-authentication is enabled for all EAP methods that
+# support it. This variable can be used to disable fast re-authentication.
+# Normally, there is no need to disable this.
+fast_reauth=1
+
+# OpenSSL Engine support
+# These options can be used to load OpenSSL engines.
+# The two engines that are supported currently are shown below:
+# They are both from the opensc project (http://www.opensc.org/)
+# By default no engines are loaded.
+# make the opensc engine available
+#opensc_engine_path=/usr/lib/opensc/engine_opensc.so
+# make the pkcs11 engine available
+#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
+# configure the path to the pkcs11 module required by the pkcs11 engine
+#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
+
+# Dynamic EAP methods
+# If EAP methods were built dynamically as shared object files, they need to be
+# loaded here before being used in the network blocks. By default, EAP methods
+# are included statically in the build, so these lines are not needed
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so
+#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so
+
+# Driver interface parameters
+# This field can be used to configure arbitrary driver interace parameters. The
+# format is specific to the selected driver interface. This field is not used
+# in most cases.
+#driver_param="field=value"
+
+# Maximum lifetime for PMKSA in seconds; default 43200
+#dot11RSNAConfigPMKLifetime=43200
+# Threshold for reauthentication (percentage of PMK lifetime); default 70
+#dot11RSNAConfigPMKReauthThreshold=70
+# Timeout for security association negotiation in seconds; default 60
+#dot11RSNAConfigSATimeout=60
+
+# network block
+#
+# Each network (usually AP's sharing the same SSID) is configured as a separate
+# block in this configuration file. The network blocks are in preference order
+# (the first match is used).
+#
+# network block fields:
+#
+# disabled:
+# 0 = this network can be used (default)
+# 1 = this network block is disabled (can be enabled through ctrl_iface,
+# e.g., with wpa_cli or wpa_gui)
+#
+# id_str: Network identifier string for external scripts. This value is passed
+# to external action script through wpa_cli as WPA_ID_STR environment
+# variable to make it easier to do network specific configuration.
+#
+# ssid: SSID (mandatory); either as an ASCII string with double quotation or
+# as hex string; network name
+#
+# scan_ssid:
+# 0 = do not scan this SSID with specific Probe Request frames (default)
+# 1 = scan with SSID-specific Probe Request frames (this can be used to
+# find APs that do not accept broadcast SSID or use multiple SSIDs;
+# this will add latency to scanning, so enable this only when needed)
+#
+# bssid: BSSID (optional); if set, this network block is used only when
+# associating with the AP using the configured BSSID
+#
+# priority: priority group (integer)
+# By default, all networks will get same priority group (0). If some of the
+# networks are more desirable, this field can be used to change the order in
+# which wpa_supplicant goes through the networks when selecting a BSS. The
+# priority groups will be iterated in decreasing priority (i.e., the larger the
+# priority value, the sooner the network is matched against the scan results).
+# Within each priority group, networks will be selected based on security
+# policy, signal strength, etc.
+# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not
+# using this priority to select the order for scanning. Instead, they try the
+# networks in the order that used in the configuration file.
+#
+# mode: IEEE 802.11 operation mode
+# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default)
+# 1 = IBSS (ad-hoc, peer-to-peer)
+# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP)
+# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). In addition, ap_scan has
+# to be set to 2 for IBSS. WPA-None requires following network block options:
+# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not
+# both), and psk must also be set.
+#
+# proto: list of accepted protocols
+# WPA = WPA/IEEE 802.11i/D3.0
+# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN)
+# If not set, this defaults to: WPA RSN
+#
+# key_mgmt: list of accepted authenticated key management protocols
+# WPA-PSK = WPA pre-shared key (this requires 'psk' field)
+# WPA-EAP = WPA using EAP authentication (this can use an external
+# program, e.g., Xsupplicant, for IEEE 802.1X EAP Authentication
+# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically
+# generated WEP keys
+# NONE = WPA is not used; plaintext or static WEP could be used
+# If not set, this defaults to: WPA-PSK WPA-EAP
+#
+# auth_alg: list of allowed IEEE 802.11 authentication algorithms
+# OPEN = Open System authentication (required for WPA/WPA2)
+# SHARED = Shared Key authentication (requires static WEP keys)
+# LEAP = LEAP/Network EAP (only used with LEAP)
+# If not set, automatic selection is used (Open System with LEAP enabled if
+# LEAP is allowed as one of the EAP methods).
+#
+# pairwise: list of accepted pairwise (unicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# NONE = Use only Group Keys (deprecated, should not be included if APs support
+# pairwise keys)
+# If not set, this defaults to: CCMP TKIP
+#
+# group: list of accepted group (broadcast/multicast) ciphers for WPA
+# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0]
+# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0]
+# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key
+# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11]
+# If not set, this defaults to: CCMP TKIP WEP104 WEP40
+#
+# psk: WPA preshared key; 256-bit pre-shared key
+# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e.,
+# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be
+# generated using the passphrase and SSID). ASCII passphrase must be between
+# 8 and 63 characters (inclusive).
+# This field is not needed, if WPA-EAP is used.
+# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys
+# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant
+# startup and reconfiguration time can be optimized by generating the PSK only
+# only when the passphrase or SSID has actually changed.
+#
+# eapol_flags: IEEE 802.1X/EAPOL options (bit field)
+# Dynamic WEP key required for non-WPA mode
+# bit0 (1): require dynamically generated unicast WEP key
+# bit1 (2): require dynamically generated broadcast WEP key
+# (3 = require both keys; default)
+# Note: When using wired authentication, eapol_flags must be set to 0 for the
+# authentication to be completed successfully.
+#
+# proactive_key_caching:
+# Enable/disable opportunistic PMKSA caching for WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#
+# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or
+# hex without quotation, e.g., 0102030405)
+# wep_tx_keyidx: Default WEP key index (TX) (0..3)
+#
+# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is
+# allowed. This is only used with RSN/WPA2.
+# 0 = disabled (default)
+# 1 = enabled
+#peerkey=1
+#
+# Following fields are only used with internal EAP implementation.
+# eap: space-separated list of accepted EAP methods
+# MD5 = EAP-MD5 (unsecure and does not generate keying material ->
+# cannot be used with WPA; to be used as a Phase 2 method
+# with EAP-PEAP or EAP-TTLS)
+# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# OTP = EAP-OTP (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# GTC = EAP-GTC (cannot be used separately with WPA; to be used
+# as a Phase 2 method with EAP-PEAP or EAP-TTLS)
+# TLS = EAP-TLS (client and server certificate)
+# PEAP = EAP-PEAP (with tunnelled EAP authentication)
+# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2
+# authentication)
+# If not set, all compiled in methods are allowed.
+#
+# identity: Identity string for EAP
+# anonymous_identity: Anonymous identity string for EAP (to be used as the
+# unencrypted identity with EAP types that support different tunnelled
+# identity, e.g., EAP-TTLS)
+# password: Password string for EAP
+# ca_cert: File path to CA certificate file (PEM/DER). This file can have one
+# or more trusted CA certificates. If ca_cert and ca_path are not
+# included, server certificate will not be verified. This is insecure and
+# a trusted CA certificate should always be configured when using
+# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may
+# change when wpa_supplicant is run in the background.
+# On Windows, trusted CA certificates can be loaded from the system
+# certificate store by setting this to cert_store://<name>, e.g.,
+# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT".
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+# ca_path: Directory path for CA certificate files (PEM). This path may
+# contain multiple CA certificates in OpenSSL format. Common use for this
+# is to point to system trusted CA list which is often installed into
+# directory like /etc/ssl/certs. If configured, these certificates are
+# added to the list of trusted CAs. ca_cert may also be included in that
+# case, but it is not required.
+# client_cert: File path to client certificate file (PEM/DER)
+# Full path should be used since working directory may change when
+# wpa_supplicant is run in the background.
+# Alternatively, a named configuration blob can be used by setting this
+# to blob://<blob name>.
+# private_key: File path to client private key file (PEM/DER/PFX)
+# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be
+# commented out. Both the private key and certificate will be read from
+# the PKCS#12 file in this case. Full path should be used since working
+# directory may change when wpa_supplicant is run in the background.
+# Windows certificate store can be used by leaving client_cert out and
+# configuring private_key in one of the following formats:
+# cert://substring_to_match
+# hash://certificate_thumbprint_in_hex
+# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4"
+# Note that when running wpa_supplicant as an application, the user
+# certificate store (My user account) is used, whereas computer store
+# (Computer account) is used when running wpasvc as a service.
+# Alternatively, a named configuration blob can be used by setting this
+# to blob://<blob name>.
+# private_key_passwd: Password for private key file (if left out, this will be
+# asked through control interface)
+# dh_file: File path to DH/DSA parameters file (in PEM format)
+# This is an optional configuration file for setting parameters for an
+# ephemeral DH key exchange. In most cases, the default RSA
+# authentication does not use this configuration. However, it is possible
+# setup RSA to use ephemeral DH key exchange. In addition, ciphers with
+# DSA keys always use ephemeral DH keys. This can be used to achieve
+# forward secrecy. If the file is in DSA parameters format, it will be
+# automatically converted into DH params.
+# subject_match: Substring to be matched against the subject of the
+# authentication server certificate. If this string is set, the server
+# sertificate is only accepted if it contains this string in the subject.
+# The subject string is in following format:
+# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com
+# altsubject_match: Semicolon separated string of entries to be matched against
+# the alternative subject name of the authentication server certificate.
+# If this string is set, the server sertificate is only accepted if it
+# contains one of the entries in an alternative subject name extension.
+# altSubjectName string is in following format: TYPE:VALUE
+# Example: EMAIL:server@example.com
+# Example: DNS:server.example.com;DNS:server2.example.com
+# Following types are supported: EMAIL, DNS, URI
+# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters
+# (string with field-value pairs, e.g., "peapver=0" or
+# "peapver=1 peaplabel=1")
+# 'peapver' can be used to force which PEAP version (0 or 1) is used.
+# 'peaplabel=1' can be used to force new label, "client PEAP encryption",
+# to be used during key derivation when PEAPv1 or newer. Most existing
+# PEAPv1 implementation seem to be using the old label, "client EAP
+# encryption", and wpa_supplicant is now using that as the default value.
+# Some servers, e.g., Radiator, may require peaplabel=1 configuration to
+# interoperate with PEAPv1; see eap_testing.txt for more details.
+# 'peap_outer_success=0' can be used to terminate PEAP authentication on
+# tunneled EAP-Success. This is required with some RADIUS servers that
+# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g.,
+# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode)
+# include_tls_length=1 can be used to force wpa_supplicant to include
+# TLS Message Length field in all TLS messages even if they are not
+# fragmented.
+# sim_min_num_chal=3 can be used to configure EAP-SIM to require three
+# challenges (by default, it accepts 2 or 3)
+# phase2: Phase2 (inner authentication with TLS tunnel) parameters
+# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or
+# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS)
+# Following certificate/private key fields are used in inner Phase2
+# authentication when using EAP-TTLS or EAP-PEAP.
+# ca_cert2: File path to CA certificate file. This file can have one or more
+# trusted CA certificates. If ca_cert2 and ca_path2 are not included,
+# server certificate will not be verified. This is insecure and a trusted
+# CA certificate should always be configured.
+# ca_path2: Directory path for CA certificate files (PEM)
+# client_cert2: File path to client certificate file
+# private_key2: File path to client private key file
+# private_key2_passwd: Password for private key file
+# dh_file2: File path to DH/DSA parameters file (in PEM format)
+# subject_match2: Substring to be matched against the subject of the
+# authentication server certificate.
+# altsubject_match2: Substring to be matched against the alternative subject
+# name of the authentication server certificate.
+#
+# fragment_size: Maximum EAP fragment size in bytes (default 1398).
+# This value limits the fragment size for EAP methods that support
+# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set
+# small enough to make the EAP messages fit in MTU of the network
+# interface used for EAPOL. The default value is suitable for most
+# cases.
+#
+# EAP-PSK variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+# nai: user NAI
+#
+# EAP-PAX variables:
+# eappsk: 16-byte (128-bit, 32 hex digits) pre-shared key in hex format
+#
+# EAP-SAKE variables:
+# eappsk: 32-byte (256-bit, 64 hex digits) pre-shared key in hex format
+# (this is concatenation of Root-Secret-A and Root-Secret-B)
+# nai: user NAI (PEERID)
+#
+# EAP-GPSK variables:
+# eappsk: Pre-shared key in hex format (at least 128 bits, i.e., 32 hex digits)
+# nai: user NAI (ID_Client)
+#
+# EAP-FAST variables:
+# pac_file: File path for the PAC entries. wpa_supplicant will need to be able
+# to create this file and write updates to it when PAC is being
+# provisioned or refreshed. Full path to the file should be used since
+# working directory may change when wpa_supplicant is run in the
+# background. Alternatively, a named configuration blob can be used by
+# setting this to blob://<blob name>
+# phase1: fast_provisioning=1 option enables in-line provisioning of EAP-FAST
+# credentials (PAC)
+#
+# wpa_supplicant supports number of "EAP workarounds" to work around
+# interoperability issues with incorrectly behaving authentication servers.
+# These are enabled by default because some of the issues are present in large
+# number of authentication servers. Strict EAP conformance mode can be
+# configured by disabling workarounds with eap_workaround=0.
+
+# Example blocks:
+
+# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers
+network={
+ ssid="simple"
+ psk="very secret passphrase"
+ priority=5
+}
+
+# Same as previous, but request SSID-specific scanning (for APs that reject
+# broadcast SSID)
+network={
+ ssid="second ssid"
+ scan_ssid=1
+ psk="very secret passphrase"
+ priority=2
+}
+
+# Only WPA-PSK is used. Any valid cipher combination is accepted.
+network={
+ ssid="example"
+ proto=WPA
+ key_mgmt=WPA-PSK
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+ priority=2
+}
+
+# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104
+# or WEP40 as the group cipher will not be accepted.
+network={
+ ssid="example"
+ proto=RSN
+ key_mgmt=WPA-EAP
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ priority=1
+}
+
+# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel
+# (e.g., Radiator)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=PEAP
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase1="peaplabel=1"
+ phase2="auth=MSCHAPV2"
+ priority=10
+}
+
+# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the
+# unencrypted use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ priority=2
+}
+
+# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted
+# use. Real identity is sent only within an encrypted TLS tunnel.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ phase2="auth=MSCHAPV2"
+}
+
+# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner
+# authentication.
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ # Phase1 / outer authentication
+ anonymous_identity="anonymous@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ # Phase 2 / inner authentication
+ phase2="autheap=TLS"
+ ca_cert2="/etc/cert/ca2.pem"
+ client_cert2="/etc/cer/user.pem"
+ private_key2="/etc/cer/user.prv"
+ private_key2_passwd="password"
+ priority=2
+}
+
+# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and
+# group cipher.
+network={
+ ssid="example"
+ bssid=00:11:22:33:44:55
+ proto=WPA RSN
+ key_mgmt=WPA-PSK WPA-EAP
+ pairwise=CCMP
+ group=CCMP
+ psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb
+}
+
+# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP
+# and all valid ciphers.
+network={
+ ssid=00010203
+ psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f
+}
+
+
+# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using
+# EAP-TLS for authentication and key generation; require both unicast and
+# broadcast WEP keys.
+network={
+ ssid="1x-test"
+ key_mgmt=IEEE8021X
+ eap=TLS
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ eapol_flags=3
+}
+
+
+# LEAP with dynamic WEP keys
+network={
+ ssid="leap-example"
+ key_mgmt=IEEE8021X
+ eap=LEAP
+ identity="user"
+ password="foobar"
+}
+
+# Plaintext connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="plaintext-test"
+ key_mgmt=NONE
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X)
+network={
+ ssid="static-wep-test"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+}
+
+
+# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key
+# IEEE 802.11 authentication
+network={
+ ssid="static-wep-test2"
+ key_mgmt=NONE
+ wep_key0="abcde"
+ wep_key1=0102030405
+ wep_key2="1234567890123"
+ wep_tx_keyidx=0
+ priority=5
+ auth_alg=SHARED
+}
+
+
+# IBSS/ad-hoc network with WPA-None/TKIP.
+network={
+ ssid="test adhoc"
+ mode=1
+ proto=WPA
+ key_mgmt=WPA-NONE
+ pairwise=NONE
+ group=TKIP
+ psk="secret passphrase"
+}
+
+
+# Catch all example that allows more or less all configuration modes
+network={
+ ssid="example"
+ scan_ssid=1
+ key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
+ pairwise=CCMP TKIP
+ group=CCMP TKIP WEP104 WEP40
+ psk="very secret passphrase"
+ eap=TTLS PEAP TLS
+ identity="user@example.com"
+ password="foobar"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+ private_key="/etc/cert/user.prv"
+ private_key_passwd="password"
+ phase1="peaplabel=0"
+}
+
+# Example of EAP-TLS with smartcard (openssl engine)
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TLS
+ proto=RSN
+ pairwise=CCMP TKIP
+ group=CCMP TKIP
+ identity="user@example.com"
+ ca_cert="/etc/cert/ca.pem"
+ client_cert="/etc/cert/user.pem"
+
+ engine=1
+
+ # The engine configured here must be available. Look at
+ # OpenSSL engine support in the global section.
+ # The key available through the engine must be the private key
+ # matching the client certificate configured above.
+
+ # use the opensc engine
+ #engine_id="opensc"
+ #key_id="45"
+
+ # use the pkcs11 engine
+ engine_id="pkcs11"
+ key_id="id_45"
+
+ # Optional PIN configuration; this can be left out and PIN will be
+ # asked through the control interface
+ pin="1234"
+}
+
+# Example configuration showing how to use an inlined blob as a CA certificate
+# data instead of using external file
+network={
+ ssid="example"
+ key_mgmt=WPA-EAP
+ eap=TTLS
+ identity="user@example.com"
+ anonymous_identity="anonymous@example.com"
+ password="foobar"
+ ca_cert="blob://exampleblob"
+ priority=20
+}
+
+blob-base64-exampleblob={
+SGVsbG8gV29ybGQhCg==
+}
+
+
+# Wildcard match for SSID (plaintext APs only). This example select any
+# open AP regardless of its SSID.
+network={
+ key_mgmt=NONE
+}
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane
new file mode 100644
index 0000000..c91ffe0
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/wpa_supplicant.conf-sane
@@ -0,0 +1,7 @@
+ctrl_interface=/var/run/wpa_supplicant
+ctrl_interface_group=0
+update_config=1
+
+network={
+ key_mgmt=NONE
+}
diff --git a/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.4.bb b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.4.bb
new file mode 100644
index 0000000..a124cf2
--- /dev/null
+++ b/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant_2.4.bb
@@ -0,0 +1,116 @@
+SUMMARY = "Client for Wi-Fi Protected Access (WPA)"
+HOMEPAGE = "http://hostap.epitest.fi/wpa_supplicant/"
+BUGTRACKER = "http://hostap.epitest.fi/bugz/"
+SECTION = "network"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=36b27801447e0662ee0138d17fe93880 \
+ file://README;beginline=1;endline=56;md5=7f393579f8b109fe91f3b9765d26c7d3 \
+ file://wpa_supplicant/wpa_supplicant.c;beginline=1;endline=12;md5=3430fda79f2ba1dd545f0b3c4d6e4d24 "
+DEPENDS = "dbus libnl libgcrypt"
+RRECOMMENDS_${PN} = "wpa-supplicant-passphrase wpa-supplicant-cli"
+
+PACKAGECONFIG ??= "gnutls"
+PACKAGECONFIG[gnutls] = ",,gnutls"
+PACKAGECONFIG[openssl] = ",,openssl"
+
+inherit systemd
+
+SYSTEMD_SERVICE_${PN} = "wpa_supplicant.service wpa_supplicant-nl80211@.service wpa_supplicant-wired@.service"
+SYSTEMD_AUTO_ENABLE = "disable"
+
+SRC_URI = "http://hostap.epitest.fi/releases/wpa_supplicant-${PV}.tar.gz \
+ file://defconfig \
+ file://wpa-supplicant.sh \
+ file://wpa_supplicant.conf \
+ file://wpa_supplicant.conf-sane \
+ file://99_wpa_supplicant \
+ file://0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch \
+ file://0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch \
+ file://0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch \
+ file://0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch \
+ file://0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch \
+ file://0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch \
+ file://0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch \
+ file://0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch \
+ "
+SRC_URI[md5sum] = "f0037dbe03897dcaf2ad2722e659095d"
+SRC_URI[sha256sum] = "058dc832c096139a059e6df814080f50251a8d313c21b13364c54a1e70109122"
+
+S = "${WORKDIR}/wpa_supplicant-${PV}"
+
+PACKAGES_prepend = "wpa-supplicant-passphrase wpa-supplicant-cli "
+FILES_wpa-supplicant-passphrase = "${bindir}/wpa_passphrase"
+FILES_wpa-supplicant-cli = "${sbindir}/wpa_cli"
+FILES_${PN} += "${datadir}/dbus-1/system-services/*"
+CONFFILES_${PN} += "${sysconfdir}/wpa_supplicant.conf"
+
+do_configure () {
+ ${MAKE} -C wpa_supplicant clean
+ install -m 0755 ${WORKDIR}/defconfig wpa_supplicant/.config
+ echo "CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> wpa_supplicant/.config
+ echo "DRV_CFLAGS +=\"-I${STAGING_INCDIR}/libnl3\"" >> wpa_supplicant/.config
+
+ if echo "${PACKAGECONFIG}" | grep -qw "openssl"; then
+ ssl=openssl
+ elif echo "${PACKAGECONFIG}" | grep -qw "gnutls"; then
+ ssl=gnutls
+ fi
+ if [ -n "$ssl" ]; then
+ sed -i "s/%ssl%/$ssl/" wpa_supplicant/.config
+ fi
+
+ # For rebuild
+ rm -f wpa_supplicant/*.d wpa_supplicant/dbus/*.d
+}
+
+export EXTRA_CFLAGS = "${CFLAGS}"
+export BINDIR = "${sbindir}"
+
+do_compile () {
+ unset CFLAGS CPPFLAGS CXXFLAGS
+ sed -e "s:CFLAGS\ =.*:& \$(EXTRA_CFLAGS):g" -i ${S}/src/lib.rules
+ oe_runmake -C wpa_supplicant
+}
+
+do_install () {
+ install -d ${D}${sbindir}
+ install -m 755 wpa_supplicant/wpa_supplicant ${D}${sbindir}
+ install -m 755 wpa_supplicant/wpa_cli ${D}${sbindir}
+
+ install -d ${D}${bindir}
+ install -m 755 wpa_supplicant/wpa_passphrase ${D}${bindir}
+
+ install -d ${D}${docdir}/wpa_supplicant
+ install -m 644 wpa_supplicant/README ${WORKDIR}/wpa_supplicant.conf ${D}${docdir}/wpa_supplicant
+
+ install -d ${D}${sysconfdir}
+ install -m 600 ${WORKDIR}/wpa_supplicant.conf-sane ${D}${sysconfdir}/wpa_supplicant.conf
+
+ install -d ${D}${sysconfdir}/network/if-pre-up.d/
+ install -d ${D}${sysconfdir}/network/if-post-down.d/
+ install -d ${D}${sysconfdir}/network/if-down.d/
+ install -m 755 ${WORKDIR}/wpa-supplicant.sh ${D}${sysconfdir}/network/if-pre-up.d/wpa-supplicant
+ cd ${D}${sysconfdir}/network/ && \
+ ln -sf ../if-pre-up.d/wpa-supplicant if-post-down.d/wpa-supplicant
+
+ install -d ${D}/${sysconfdir}/dbus-1/system.d
+ install -m 644 ${S}/wpa_supplicant/dbus/dbus-wpa_supplicant.conf ${D}/${sysconfdir}/dbus-1/system.d
+ install -d ${D}/${datadir}/dbus-1/system-services
+ install -m 644 ${S}/wpa_supplicant/dbus/*.service ${D}/${datadir}/dbus-1/system-services
+
+ if ${@bb.utils.contains('DISTRO_FEATURES','systemd','true','false',d)}; then
+ install -d ${D}/${systemd_unitdir}/system
+ install -m 644 ${S}/wpa_supplicant/systemd/*.service ${D}/${systemd_unitdir}/system
+ fi
+
+ install -d ${D}/etc/default/volatiles
+ install -m 0644 ${WORKDIR}/99_wpa_supplicant ${D}/etc/default/volatiles
+}
+
+pkg_postinst_wpa-supplicant () {
+ # If we're offline, we don't need to do this.
+ if [ "x$D" = "x" ]; then
+ killall -q -HUP dbus-daemon || true
+ fi
+
+}