diff --git a/meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch b/meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
new file mode 100644
index 0000000..8b493eb
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/0001-rt-tests-Allow-for-user-specified-PYLIB.patch
@@ -0,0 +1,35 @@
+From 66765522b634952346f1a3ab7d00c7222a1f9361 Mon Sep 17 00:00:00 2001
+Message-Id: <66765522b634952346f1a3ab7d00c7222a1f9361.1347419597.git.dvhart@linux.intel.com>
+From: Darren Hart <dvhart@linux.intel.com>
+Date: Tue, 11 Sep 2012 15:19:30 -0700
+Subject: [PATCH 1/2] rt-tests: Allow for user-specified PYLIB
+
+Upstream-Status: Submitted
+
+Allow users (build systems) to specify PYLIB. This allows for a
+cross-build-system to specify the target PYLIB rather than the host
+PYLIB.
+
+Signed-off-by: Darren Hart <dvhart@linux.intel.com>
+CC: Clark Williams <williams@redhat.com>
+CC: John Kacur <jkacur@redhat.com>
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 3a82407..61e2f9f 100644
+--- a/Makefile
++++ b/Makefile
+@@ -23,7 +23,7 @@ endif
+ CFLAGS ?= -D_GNU_SOURCE -Wall -Wno-nonnull -Isrc/include
+ LDFLAGS ?=
+ 
+-PYLIB  := $(shell python -c 'import distutils.sysconfig;  print distutils.sysconfig.get_python_lib()')
++PYLIB  ?= $(shell python -c 'import distutils.sysconfig;  print distutils.sysconfig.get_python_lib()')
+ 
+ ifndef DEBUG
+ 	CFLAGS	+= -O2
+-- 
+1.7.11.4
+
diff --git a/meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch b/meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
new file mode 100644
index 0000000..bc6136f
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/0002-rt-tests-Break-out-install_hwlatdetect.patch
@@ -0,0 +1,68 @@
+From af93e580d005a2bba6ed36528003af4cf631adb8 Mon Sep 17 00:00:00 2001
+Message-Id: <af93e580d005a2bba6ed36528003af4cf631adb8.1347419597.git.dvhart@linux.intel.com>
+In-Reply-To: <66765522b634952346f1a3ab7d00c7222a1f9361.1347419597.git.dvhart@linux.intel.com>
+References: <66765522b634952346f1a3ab7d00c7222a1f9361.1347419597.git.dvhart@linux.intel.com>
+From: Darren Hart <dvhart@linux.intel.com>
+Date: Tue, 11 Sep 2012 14:51:10 -0700
+Subject: [PATCH 2/2] rt-tests: Break out install_hwlatdetect
+
+Upstream-Status: Submitted
+
+Allow hwlatdetect to be installed independently of the rest of the
+tests. This is convenient for build systems that package it separately
+due to the python dependency.
+
+Signed-off-by: Darren Hart <dvhart@linux.intel.com>
+CC: Clark Williams <williams@redhat.com>
+CC: John Kacur <jkacur@redhat.com>
+---
+ Makefile | 18 +++++++++++-------
+ 1 file changed, 11 insertions(+), 7 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 61e2f9f..636e63b 100644
+--- a/Makefile
++++ b/Makefile
+@@ -119,21 +119,15 @@ changelog:
+ 	git log >ChangeLog
+ 
+ .PHONY: install
+-install: all
++install: all install_hwlatdetect
+ 	mkdir -p "$(DESTDIR)$(bindir)" "$(DESTDIR)$(mandir)/man4"
+ 	mkdir -p "$(DESTDIR)$(srcdir)" "$(DESTDIR)$(mandir)/man8"
+ 	cp $(TARGETS) "$(DESTDIR)$(bindir)"
+-	if test -n "$(PYLIB)" ; then \
+-		install -D -m 755 src/hwlatdetect/hwlatdetect.py $(DESTDIR)$(PYLIB)/hwlatdetect.py ; \
+-		rm -f "$(DESTDIR)$(bindir)/hwlatdetect" ; \
+-		ln -s $(PYLIB)/hwlatdetect.py "$(DESTDIR)$(bindir)/hwlatdetect" ; \
+-	fi
+ 	install -D -m 644 src/backfire/backfire.c "$(DESTDIR)$(srcdir)/backfire/backfire.c"
+ 	install -m 644 src/backfire/Makefile "$(DESTDIR)$(srcdir)/backfire/Makefile"
+ 	gzip src/backfire/backfire.4 -c >"$(DESTDIR)$(mandir)/man4/backfire.4.gz"
+ 	gzip src/cyclictest/cyclictest.8 -c >"$(DESTDIR)$(mandir)/man8/cyclictest.8.gz"
+ 	gzip src/pi_tests/pi_stress.8 -c >"$(DESTDIR)$(mandir)/man8/pi_stress.8.gz"
+-	gzip src/hwlatdetect/hwlatdetect.8 -c >"$(DESTDIR)$(mandir)/man8/hwlatdetect.8.gz"
+ 	gzip src/ptsematest/ptsematest.8 -c >"$(DESTDIR)$(mandir)/man8/ptsematest.8.gz"
+ 	gzip src/sigwaittest/sigwaittest.8 -c >"$(DESTDIR)$(mandir)/man8/sigwaittest.8.gz"
+ 	gzip src/svsematest/svsematest.8 -c >"$(DESTDIR)$(mandir)/man8/svsematest.8.gz"
+@@ -141,6 +135,16 @@ install: all
+ 	gzip src/backfire/sendme.8 -c >"$(DESTDIR)$(mandir)/man8/sendme.8.gz"
+ 	gzip src/hackbench/hackbench.8 -c >"$(DESTDIR)$(mandir)/man8/hackbench.8.gz"
+ 
++.PHONY: install_hwlatdetect
++install_hwlatdetect: hwlatdetect
++	if test -n "$(PYLIB)" ; then \
++		mkdir -p "$(DESTDIR)$(bindir)" "$(DESTDIR)$(mandir)/man8" ; \
++		install -D -m 755 src/hwlatdetect/hwlatdetect.py $(DESTDIR)$(PYLIB)/hwlatdetect.py ; \
++		rm -f "$(DESTDIR)$(bindir)/hwlatdetect" ; \
++		ln -s $(PYLIB)/hwlatdetect.py "$(DESTDIR)$(bindir)/hwlatdetect" ; \
++		gzip src/hwlatdetect/hwlatdetect.8 -c >"$(DESTDIR)$(mandir)/man8/hwlatdetect.8.gz" ; \
++	fi
++
+ .PHONY: release
+ release: clean changelog
+ 	mkdir -p releases
+-- 
+1.7.11.4
+
diff --git a/meta/recipes-rt/rt-tests/files/Makefile-fix-gzip-command.patch b/meta/recipes-rt/rt-tests/files/Makefile-fix-gzip-command.patch
new file mode 100644
index 0000000..0a35ddc
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/Makefile-fix-gzip-command.patch
@@ -0,0 +1,30 @@
+From 07b5ed42d7041ccc084889eaa96817aa097bf461 Mon Sep 17 00:00:00 2001
+From: Robert Yang <liezhi.yang@windriver.com>
+Date: Tue, 3 Feb 2015 03:10:25 +0000
+Subject: [PATCH] Makefile: fix gzip command
+
+The "-c" doesn't work in command "gzip file -c", need use "gzip -c file"
+
+Upstream-Status: Pending
+
+Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 219a591..c7d147a 100644
+--- a/Makefile
++++ b/Makefile
+@@ -144,7 +144,7 @@ install_hwlatdetect: hwlatdetect
+ 		install -D -m 755 src/hwlatdetect/hwlatdetect.py $(DESTDIR)$(PYLIB)/hwlatdetect.py ; \
+ 		rm -f "$(DESTDIR)$(bindir)/hwlatdetect" ; \
+ 		ln -s $(PYLIB)/hwlatdetect.py "$(DESTDIR)$(bindir)/hwlatdetect" ; \
+-		gzip src/hwlatdetect/hwlatdetect.8 -c >"$(DESTDIR)$(mandir)/man8/hwlatdetect.8.gz" ; \
++		gzip -c src/hwlatdetect/hwlatdetect.8 >"$(DESTDIR)$(mandir)/man8/hwlatdetect.8.gz" ; \
+ 	fi
+ 
+ .PHONY: release
+-- 
+2.0.1
+
diff --git a/meta/recipes-rt/rt-tests/files/fix-re-install-failure.patch b/meta/recipes-rt/rt-tests/files/fix-re-install-failure.patch
new file mode 100644
index 0000000..e38ec92
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/fix-re-install-failure.patch
@@ -0,0 +1,48 @@
+Currently gzip on host is used. If host gzip is provided by pigz, it fails to
+redo install that pigz can't handle the option after file name. When run:
+
+gzip src/backfire/backfire.4 -c > OUTPUT_FILE
+
+File src/backfire/backfire.4 is zipped into backfire.4.gz but the OUTPUT_FILE
+is empty. When rerun do_install, it shows warning:
+
+| gzip: src/backfire/backfire.4 does not exist -- skipping
+
+and empty manual gzip files are created:
+
+$ file image/usr/share/man/man4/backfire.4.gz
+image/usr/share/man/man4/backfire.4.gz: empty
+
+Fix it by putting option '-c' before the file name.
+
+Upstream-Status: Pending
+
+Signed-off-by: Kai Kang <kai.kang@windriver.com>
+---
+--- git/Makefile.orig	2014-11-14 15:47:26.406638419 +0800
++++ git/Makefile	2014-11-14 15:46:53.890637533 +0800
+@@ -127,15 +127,15 @@
+ 	cp $(TARGETS) "$(DESTDIR)$(bindir)"
+ 	install -D -m 644 src/backfire/backfire.c "$(DESTDIR)$(srcdir)/backfire/backfire.c"
+ 	install -m 644 src/backfire/Makefile "$(DESTDIR)$(srcdir)/backfire/Makefile"
+-	gzip src/backfire/backfire.4 -c >"$(DESTDIR)$(mandir)/man4/backfire.4.gz"
+-	gzip src/cyclictest/cyclictest.8 -c >"$(DESTDIR)$(mandir)/man8/cyclictest.8.gz"
+-	gzip src/pi_tests/pi_stress.8 -c >"$(DESTDIR)$(mandir)/man8/pi_stress.8.gz"
+-	gzip src/ptsematest/ptsematest.8 -c >"$(DESTDIR)$(mandir)/man8/ptsematest.8.gz"
+-	gzip src/sigwaittest/sigwaittest.8 -c >"$(DESTDIR)$(mandir)/man8/sigwaittest.8.gz"
+-	gzip src/svsematest/svsematest.8 -c >"$(DESTDIR)$(mandir)/man8/svsematest.8.gz"
+-	gzip src/pmqtest/pmqtest.8 -c >"$(DESTDIR)$(mandir)/man8/pmqtest.8.gz"
+-	gzip src/backfire/sendme.8 -c >"$(DESTDIR)$(mandir)/man8/sendme.8.gz"
+-	gzip src/hackbench/hackbench.8 -c >"$(DESTDIR)$(mandir)/man8/hackbench.8.gz"
++	gzip -c src/backfire/backfire.4 >"$(DESTDIR)$(mandir)/man4/backfire.4.gz"
++	gzip -c src/cyclictest/cyclictest.8 >"$(DESTDIR)$(mandir)/man8/cyclictest.8.gz"
++	gzip -c src/pi_tests/pi_stress.8 >"$(DESTDIR)$(mandir)/man8/pi_stress.8.gz"
++	gzip -c src/ptsematest/ptsematest.8 >"$(DESTDIR)$(mandir)/man8/ptsematest.8.gz"
++	gzip -c src/sigwaittest/sigwaittest.8 >"$(DESTDIR)$(mandir)/man8/sigwaittest.8.gz"
++	gzip -c src/svsematest/svsematest.8 >"$(DESTDIR)$(mandir)/man8/svsematest.8.gz"
++	gzip -c src/pmqtest/pmqtest.8 >"$(DESTDIR)$(mandir)/man8/pmqtest.8.gz"
++	gzip -c src/backfire/sendme.8 >"$(DESTDIR)$(mandir)/man8/sendme.8.gz"
++	gzip -c src/hackbench/hackbench.8 >"$(DESTDIR)$(mandir)/man8/hackbench.8.gz"
+ 
+ .PHONY: install_hwlatdetect
+ install_hwlatdetect: hwlatdetect
diff --git a/meta/recipes-rt/rt-tests/files/hackbench-fix-error-check.patch b/meta/recipes-rt/rt-tests/files/hackbench-fix-error-check.patch
new file mode 100644
index 0000000..d17fdff
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/hackbench-fix-error-check.patch
@@ -0,0 +1,41 @@
+childinfo_t is a union that contains both signed (error) and unsigned
+(threadid) members. Thus a large threadid could appear as a negative error
+value, which will cause unexpected failures.
+
+childinfo_t should be changed to a struct, but it could potentially affect the
+performance. So we keep it as a union but only check error against -1. There is
+still a chance of false alarm but it's small.
+
+Upstream-Status: Pending
+
+Signed-off-by: Song.Li <Song.Li@windriver.com>
+Signed-off-by: Jesse Zhang <sen.zhang@windriver.com>
+---
+ src/hackbench/hackbench.c |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/src/hackbench/hackbench.c b/src/hackbench/hackbench.c
+index 8baeb23..dc0de8f 100644
+--- a/src/hackbench/hackbench.c
++++ b/src/hackbench/hackbench.c
+@@ -317,7 +317,7 @@ static unsigned int group(childinfo_t *child,
+ 		ctx->wakefd = wakefd;
+ 
+ 		child[tab_offset+i] = create_worker(ctx, (void *)(void *)receiver);
+-		if( child[tab_offset+i].error < 0 ) {
++		if( child[tab_offset+i].error == -1 ) {
+ 			return (i > 0 ? i-1 : 0);
+ 		}
+ 		snd_ctx->out_fds[i] = fds[1];
+@@ -332,7 +332,7 @@ static unsigned int group(childinfo_t *child,
+ 		snd_ctx->num_fds = num_fds;
+ 
+ 		child[tab_offset+num_fds+i] = create_worker(snd_ctx, (void *)(void *)sender);
+-		if( child[tab_offset+num_fds+i].error < 0 ) {
++		if( child[tab_offset+num_fds+i].error == -1 ) {
+ 			return (num_fds+i)-1;
+ 		}
+ 	}
+-- 
+1.7.9.5
+
diff --git a/meta/recipes-rt/rt-tests/files/rt_bmark.py b/meta/recipes-rt/rt-tests/files/rt_bmark.py
new file mode 100755
index 0000000..e2280e4
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/rt_bmark.py
@@ -0,0 +1,412 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+
+# SPDX-License-Identifier:     BSD-3-Clause
+# Copyright (C) 2015 Enea Software AB
+# Author: Thomas Lundström <thomas.lundstrom@enea.com>
+
+# The script measures interrupt latency together with different types of
+# system load. This is done using the programs cyclictest and stress.
+#
+# The main output is:
+#
+#   Best case (min) latency
+#     This has very limited value, but is presented since it can be done
+#     easily
+#
+#   Average latency
+#     This value is of interrest for throughput oriented systems. Limited
+#     value for a real-time system. Also presented because it is easy to do.
+#
+#   Worst case (max) latency
+#     This is the interesting number for a real-time system. The number
+#     presented is (of cource) the largest number observed. The challenge
+#     is to know how the observed worst case relates to the actual worst case.
+#
+#     To get an indication of the confidence, the following method is used:
+#     1) Instead of one long run, the measurement is made as a set of shorter
+#        runs. The number of runs must be a power of 2 for reasons that will
+#        shorlty be obvious
+#
+#     2) First, a list of the max values are created.
+#
+#     3) The smallest value in that list is recorded.
+#
+#     4) Then a new list is create by taking the max value of each pair of
+#        values in the original list. In this list the smallest value is
+#        recorded.
+#
+#     5) Step 3 is repeated until there is only one value in the list. See
+#        example below:
+#
+#        Samples:
+#          |  44 |     |     |     |     |
+#          |  77 |  77 |     |     |     |
+#          | 118 |     |     |     |     |
+#          | 119 | 119 | 119 |     |     |
+#          | 138 |     |     |     |     |
+#          |  57 | 138 |     |     |     |
+#          | 175 |     |     |     |     |
+#          | 130 | 175 | 175 | 175 |     |
+#          |  54 |     |     |     |     |
+#          | 150 | 150 |     |     |     |
+#          |  47 |     |     |     |     |
+#          |  59 |  59 | 150 |     |     |
+#          | 199 |     |     |     |     |
+#          | 115 | 199 |     |     |     |
+#          | 177 |     |     |     |     |
+#          | 129 | 177 | 199 | 199 | 199 |
+#
+#        Smallest value:
+#          |  44 |  59 | 119 | 175 | 199 |
+#
+#     6) The generated list of smallest values is analyzed. In this case, it
+#        can be observed that the values are increasing significantly through
+#        the entire list, which leads to the conclusion that the number of
+#        samples is too small.
+#        If instead the list had been (167, 191, 196, 199, 199), there had
+#        been a very small, or no, increase at the end of the list. We might
+#        then suspect that the number of samples is probably large enough.
+#        There is however no guarantee for that.
+#
+#     Steps 1-2 are done in run_cyclictest_suite
+#     Steps 3-5 are done in gen_minmax_list.
+#     Step 6 needs to be done manually since there is (yet) no well defined
+#     FAIL criterion and a theoretically solid PASS criterion may never be
+#     available.
+
+import multiprocessing
+import os
+import re
+import signal
+import subprocess
+import time
+import traceback
+
+# See comment on the function set_hung_tmo
+has_hung_task_detection = True
+
+#-------------------------------------------------------------------------------
+
+class TestFail(Exception):
+        def __init__(self, msg):
+                self.msg = msg
+
+        def __str__(self):
+                return "Test failure: (" + self.msg + ")"
+
+#-------------------------------------------------------------------------------
+
+def tc_name(sub_name):
+        return "rt_bmark.intlat." + sub_name
+
+#-------------------------------------------------------------------------------
+# log() does the same job as print except that a '#' is added at the beginning
+# of each line. This causes TEFEL to ignore it
+
+def log(*msg):
+        tmp = "".join(map(str, msg)) # 'map(str, ...' allows numbers
+        for line in tmp.split("\n"):
+                print "#", line
+
+#-------------------------------------------------------------------------------
+# Like log(), but with a timestamp added
+
+def log_ts(*msg):
+        ts = time.localtime()
+        stamp = "%2d:%02d:%02d: " % (ts.tm_hour, ts.tm_min, ts.tm_sec)
+        log(stamp, *msg)
+
+#-------------------------------------------------------------------------------
+
+def log_test_header(seq_no, nr_of_tests, name):
+        log("=" * 78)
+        log()
+        log("  Test case (%d/%d): %s" % (seq_no, nr_of_tests, tc_name(name)))
+        log()
+        log("." * 78)
+        log()
+
+#-------------------------------------------------------------------------------
+
+def start_stress(*args):
+        stress_cmd         = [ "stress" ]
+        added_stress_types = []
+        req_stress_types   = set(args)
+        cpu_cnt            = str(multiprocessing.cpu_count())
+
+        # The function cond_add_stress appends the options to the stress
+        # command if the stress type is in the set of requested stress types
+
+        def cond_add_stress(stress_type, options):
+                if stress_type in req_stress_types:
+                        req_stress_types.remove(stress_type)
+                        added_stress_types.append(stress_type)
+                        stress_cmd.extend(options)
+
+        #----------
+
+        cond_add_stress("io",  ["-i", cpu_cnt])
+        cond_add_stress("cpu", ["-c", cpu_cnt])
+        cond_add_stress("hdd", ["-d", cpu_cnt, "--hdd-bytes", "20M"])
+        cond_add_stress("vm",  ["-m", cpu_cnt, "--vm-bytes", "10M"])
+
+        unknown = ", ".join(req_stress_types)
+        if unknown != "":
+            raise TestFail("Unknown stress type(s): %s" % unknown)
+
+        if not added_stress_types:
+                log("No stress requested")
+                return None
+
+        added          = "+".join(added_stress_types)
+        stress_cmd_str = " ".join(stress_cmd)
+
+        log("Starting stress(", added, ")")
+        log("  Command: '", stress_cmd_str, "'")
+        log()
+
+        # preexec_fn=os.setsid causes stress to be executed in a separate
+        # session, => it gets a new process group (incl. children). It
+        # can then be terminated using os.killpg in end_stress without
+        # terminating this script.
+
+        p = subprocess.Popen(stress_cmd, preexec_fn=os.setsid)
+
+        return p
+
+#-------------------------------------------------------------------------------
+
+def end_stress(p):
+        if p is None:
+                # The value None indicates that no stress scenario was started
+                return
+
+        if p.poll() is not None:
+                raise TestFail("stress prematurely terminated.")
+
+        os.killpg(os.getpgid(p.pid), signal.SIGTERM)
+        log("Terminated stress")
+
+#-------------------------------------------------------------------------------
+
+def us2hms_str(us):
+        s = (us+500000) // 1000000 # Round microseconds to s
+        m = s//60
+        s -= 60*m;
+        h = m//60
+        m -= 60*h
+
+        return "%d:%02d:%02d" % (h, m, s)
+
+#-------------------------------------------------------------------------------
+# Sometime the hung task supervision is triggered during execution of
+# cyclictest (cyclictest starves stress). To avoid that, the supervision
+# is temporarily disabled
+
+def set_hung_tmo(new_tmo):
+        global has_hung_task_detection
+
+        tmo_file = "/proc/sys/kernel/hung_task_timeout_secs"
+
+        if not has_hung_task_detection:
+                return
+
+        if not os.access(tmo_file, os.W_OK):
+                log("Hung task detection not supported")
+                log("  (File ", tmo_file, " not found)")
+                has_hung_task_detection = False
+                return
+
+        orig_tmo = int(subprocess.check_output(["cat", tmo_file]).strip())
+        if new_tmo != orig_tmo:
+                cmd = ( "echo " + str(new_tmo) + " > " + tmo_file )
+                subprocess.check_output(cmd, shell=True)
+                log("Changed timeout for detection of hung tasks: ",
+                    orig_tmo, " -> ", new_tmo)
+
+        return orig_tmo
+
+#-------------------------------------------------------------------------------
+
+def gen_minmax_list(max_list):
+        res = [min(max_list)]
+
+        while True:
+                tmp = max_list
+                max_list = []
+                while tmp:
+                        max_list.append(max(tmp.pop(0), tmp.pop(0)))
+
+                res.append(min(max_list))
+
+                if len(max_list) < 2:
+                        return res
+
+#-------------------------------------------------------------------------------
+# Parameters for cyclictest:
+#
+# On the -S option (from cyclictest.c):
+#  -S implies options -a -t -n and same priority of all threads
+#    -a: One thread per core
+#    -n: use clock_nanosleep instead of posix interval timers
+#    -t: (without argument) Set number of threads to the number
+#         of cpus
+
+interval_core_0 = 100     # Timer interval on core 0 [us]
+interval_delta  = 20      # Interval increment for each core [us]
+loop_count      = 30000   # Number of loops (on core 0).
+
+cmd = ("cyclictest",
+       "-S",             # Standard SMP testing. See below
+       "-p", "99",       # RT priority 99
+       "-q",             # Quiet mode, i.e. print only a summary
+       "-i", str(interval_core_0),
+       "-d", str(interval_delta),
+       "-l", str(loop_count)
+       )
+rex = re.compile("C:\s*(\d+).*Min:\s*(\d+).*Avg:\s*(\d+).*Max:\s*(\d+)")
+
+def run_cyclictest_once():
+        res = subprocess.check_output(cmd)
+
+        # minlist and maxlist are lists with the extremes for each core
+        # avg_cnt is the sum of cycles for all cores
+        # avg_sum is the sum of (cycle count*average) for each core
+        #     Since cyclictest runs different number of cycles on
+        #     different cores, avg_sum/avg_cnt gives a more accurate
+        #     value of the overall average than just taking the average
+        #     of each core's averages
+
+        minlist = []
+        maxlist = []
+        avg_sum = 0
+        avg_cnt = 0
+
+        for line in res.split("\n"):
+                m = rex.search(line)
+                if m is not None:
+                        minlist.append(int(m.group(2)))
+                        maxlist.append(int(m.group(4)))
+                        n = int(m.group(1))
+                        avg_sum += n * int(m.group(3))
+                        avg_cnt += n
+
+        return min(minlist), [avg_sum, avg_cnt], max(maxlist)
+
+#-------------------------------------------------------------------------------
+# A precondition for the tracking of min-max values is that
+# the suite size os a power of 2.
+
+N          = 5
+suite_size = 2**N
+
+est_exec_time_once  = interval_core_0 * loop_count
+est_exec_time_suite = suite_size * est_exec_time_once
+
+def run_cyclictest_suite():
+        log("Starting cyclictest")
+        log("  Command          : ", " ".join(cmd))
+        log("  Number of cycles : ", loop_count*suite_size,
+            " (", suite_size, " sets of ", loop_count, " cycles)")
+        log("  Exec. time (est) : ", us2hms_str(est_exec_time_suite))
+        log()
+
+        orig_tmo = set_hung_tmo(0) # 0 => Disable
+
+        # float('inf') emulates infinity. At least in the sense that it is
+        # guaranteed to be larger than any actual number.
+        ack_min = float('inf')
+        ack_avg = [0, 0]
+
+        log()
+        log_ts("Start of execution")
+        t = time.time()
+        max_list = []
+
+        for i in xrange(0, suite_size):
+                tmp_min, tmp_avg, tmp_max = run_cyclictest_once()
+
+                msg = "%2d/%2d:" % (i+1, suite_size)
+                msg += " min: %4d" % tmp_min
+                msg += " avg: %5.1f" % (float(tmp_avg[0])/tmp_avg[1])
+                msg += " max: %4d" % tmp_max
+                log_ts(msg)
+
+                # Track minimum value
+                if tmp_min < ack_min:
+                        ack_min = tmp_min
+
+                # Track smallest max value
+                max_list.append(tmp_max)
+
+                ack_avg[0] += tmp_avg[0]
+                ack_avg[1] += tmp_avg[1]
+
+        t = time.time()-t
+        log_ts("Cyclictest completed. Actual execution time:",
+               us2hms_str(t*1000000))
+        log()
+        set_hung_tmo(orig_tmo)
+
+        return ack_min, float(ack_avg[0])/ack_avg[1], gen_minmax_list(max_list)
+
+#-------------------------------------------------------------------------------
+
+class cyclictest_runner:
+        def run_test(self, seq_no, nr_of_tests, name, stressparams):
+
+                try:
+                        log_test_header(seq_no, nr_of_tests, name)
+
+                        p = start_stress(*stressparams)
+
+                        bm_min, bm_avg, bm_max_list = run_cyclictest_suite()
+
+                        end_stress(p)
+
+                        bm_max = bm_max_list[-1]
+
+                        log()
+                        log("Min: %d us" % bm_min)
+                        log("Avg: %.1f us" % bm_avg)
+                        log("Max: %d us" % bm_max)
+                        log()
+                        log("Max list: ", bm_max_list)
+                        log()
+                        log("PASS")
+
+                        print
+                        print tc_name(name), "[Min/us,Avg/us,Max/us]:",
+                        print "%d,%.1f,%d" % (bm_min,bm_avg, bm_max)
+                        print "PASS:", tc_name(name)
+                        print
+
+                except Exception:
+                        log()
+                        log("Exception!")
+                        log()
+                        log("Traceback:", traceback.format_exc())
+                        log()
+                        log("WD: ", os.getcwd())
+                        log()
+                        log("FAIL")
+                        print
+                        print "FAIL:", tc_name(name)
+                        print
+
+#-------------------------------------------------------------------------------
+
+runner = cyclictest_runner()
+
+tests = (("no_stress", []),
+         ("cpu",  ["cpu"]),
+         ("hdd",  ["hdd"]),
+         ("io",   ["io"]),
+         ("vm",   ["vm"]),
+         ("full", ["io", "cpu", "hdd", "vm"]),
+         )
+
+nr_of_tests = len(tests)
+for seq_no, params in enumerate(tests, start=1):
+        runner.run_test(seq_no, nr_of_tests, *params)
diff --git a/meta/recipes-rt/rt-tests/files/run-ptest b/meta/recipes-rt/rt-tests/files/run-ptest
new file mode 100644
index 0000000..8e6d3e3
--- /dev/null
+++ b/meta/recipes-rt/rt-tests/files/run-ptest
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+python ./rt_bmark.py