poky: subtree update:796be0593a..10c69538c0
Alan Perry (1):
binutils: add libopcodes package for perf
Alex Stewart (1):
opkg: upgrade to version 0.4.4
Alexander Kanavin (73):
selftest/reproducible: enable world reproducibility test
selftest/reproducible: add an exclusion list for items that are not yet reproducible
kea: upgrade 1.7.10 -> 1.8.1
valgrind: exclude bar_bad/bar_bad_xml from ptests
bzip2: run ptests without valgrind
lttng-tools: disable more failing ptests
glib-2.0: add a patch to increase a test timeout
acpica: upgrade 20201113 -> 20201217
bind: upgrade 9.16.9 -> 9.16.10
diffoscope: upgrade 161 -> 163
dnf: upgrade 4.4.0 -> 4.5.2
enchant2: upgrade 2.2.13 -> 2.2.14
epiphany: upgrade 3.38.1 -> 3.38.2
ethtool: upgrade 5.9 -> 5.10
gtk+3: upgrade 3.24.23 -> 3.24.24
init-system-helpers: upgrade 1.58 -> 1.60
kbd: upgrade 2.3.0 -> 2.4.0
kea: upgrade 1.8.1 -> 1.8.2
libmodulemd: upgrade 2.9.4 -> 2.11.1
libpcre2: upgrade 10.35 -> 10.36
libtirpc: upgrade 1.2.6 -> 1.3.1
libusb1: upgrade 1.0.23 -> 1.0.24
libva: upgrade 2.9.0 -> 2.10.0
libx11: upgrade 1.6.12 -> 1.7.0
lighttpd: upgrade 1.4.56 -> 1.4.57
ninja: upgrade 1.10.1 -> 1.10.2
puzzles: upgrade to latest revision
python3-hypothesis: upgrade 5.41.5 -> 5.43.3
python3-py: upgrade 1.9.0 -> 1.10.0
python3-setuptools-scm: upgrade 4.1.2 -> 5.0.1
sqlite3: upgrade 3.33.0 -> 3.34.0
stress-ng: upgrade 0.11.24 -> 0.12.00
sudo: upgrade 1.9.3p1 -> 1.9.4p1
sysvinit: upgrade 2.97 -> 2.98
vala: upgrade 0.50.1 -> 0.50.2
vulkan-headers: upgrade 1.2.154.0 -> 1.2.162.0
webkitgtk: upgrade 2.30.2 -> 2.30.4
xprop: upgrade 1.2.4 -> 1.2.5
xserver-xorg: upgrade 1.20.9 -> 1.20.10
glib-2.0: update 2.66.2 -> 2.66.4
rpm: update 4.16.0 -> 4.16.1.2
piglit: update to latest revision
sbc: update 1.4 -> 1.5
libdnf: update 0.55.0 -> 0.55.2
libva-utils: update 2.9.1 -> 2.10.0
python3-importlib-metadata: update 3.1.1 -> 3.3.0
python3: update 3.9.0 -> 3.9.1
vulkan-loader: upgrade 1.2.154.1 -> 1.2.162.0
vulkan-tools: upgrade 1.2.154.0 -> 1.2.162.0
systemd-bootchart: update 233 -> 234
zstd: add recipe from meta-oe
zstd: update 1.4.5 -> 1.4.8
devtool: gitsm:// should be handled same as git:// in upgrades
ovmf: upgrade 202008 -> 202011
libksba: update 1.4.0 -> 1.5.0
libjitterentropy: update 2.2.0 -> 3.0.0
icu: update 68.1 -> 68.2
gnutls: update 3.6.15 -> 3.7.0
gnupg: update 2.2.23 -> 2.2.26
boost: update 1.74.0 -> 1.75.0
kexec-tools: update 2.0.20 -> 2.0.21
vulkan-samples: update to latest revision
libpam: update 1.3.1 -> 1.5.1
strace: update 5.9 -> 5.10
python3-pytest: update 6.1.2 -> 6.2.1
mtools: update 4.0.25 -> 4.0.26
gnu-config: update to latest revision
cmake: update 3.18.4 -> 3.19.2
ccache: upgrade 3.7.11 -> 4.1
ccache.bbclass: use ccache from host distribution
gawk: add missing ptest dependency
util-linux: upgrade 2.36 -> 2.36.1
ell: upgrade 0.33 -> 0.35
Anatol Belski (1):
iproute2: Make it easier to manipulate SUBDIRS list from bbappend
Anuj Mittal (2):
mesa: add more details to elf-tls patch
mesa: remove patch disabling asm
Bruce Ashfield (23):
linux-yocto-rt/5.4: update to -rt44
linux-yocto/5.4: update to v5.4.80
lttng-modules: fix build against v5.10+
kern-tools: non-gcc config support and option re-classification
linux-yocto/cfg: qemuppc: set CONFIG_SCSI to '=y'
linux-yocto/5.4: update to v5.4.82
linux-yocto/cfg: qemuarm64-gfx.cfg: add CONFIG_INPUT_UINPUT
linux-yocto/5.4: update to v5.4.83
linux-yocto/5.8/cfg: fix -tiny warnings
linux-yocto/5.4/cfg: fix -tiny warnings
systemtap: fix on target build for 4.4 and 5.10+
linux-yocto/5.4/cfg: fix FIRMWARE_LOADER warnings
kernel-devsrc: fix 32bit ARM devsrc builds
linux-yocto/5.4: update to v5.4.85
linux-yocto-dev: bump to v5.11-rc
libc-headers: update to v5.10
machine/qemuarm*: add vmalloc kernel parameter
linux-yocto: introduce v5.10 reference kernel recipes
linux-yocto/5.10: update to v5.10.2
conf/machine: bump qemu preferred versions to 5.10
poky/poky-tiny: set preferred kernel to 5.10
yocto-bsp: explicitly set preferred version for reference boards
poky-alt: don't use conditional assignment for preferred kernel version
Changqing Li (2):
libexif: fix CVE-2020-0198; CVE-2020-0452
libpam: support usrmerge
Chris Laplante (1):
contrib/git-hooks: add a sendemail-validate example hook that adds FROM: lines to outgoing patch emails
Christopher Larson (2):
grub-efi-cfg: exclude OVERRIDES from build_efi_cfg vardeps
uboot-extlinux-config: exclude OVERRIDES from do_create_extlinux_config vardeps
Deepak Rawat (1):
openssl: add support for mingw64 as target
Diego Sueiro (2):
wic: Introduce empty plugin to create unformatted empty partitions
modutils-initscripts: Use depmod -a when modules.dep is empty
Dmitry Baryshkov (3):
perl: fix installation failure because of shell issue
linux-firmware: upgrade 20201118 -> 20201218
linux-firmware: package firmware for Lontium lt9611uxc bridge
Easwar Hariharan (1):
classes/kernel-fitimage: make fitimage_emit_section_config more readable
Elvis Stansvik (1):
ref-manual: terms: Fix poky tarball root folder
Jack Mitchell (1):
distutils3: allow setup.py to be run from a different directory to ${S}
Joey Degges (4):
bitbake: tests/fetch: Organize usehead tests by net requirements
bitbake: tests/fetch: Document behavior of test_gitfetch_usehead
bitbake: tests/fetch: Test usehead with a non-default name
bitbake: fetch/git: Fix usehead for non-default names
Jose Quaresma (11):
gstreamer1.0: upgrade 1.18.1 -> 1.18.2
gstreamer1.0-plugins-bad: v4l2codecs fix typo
gstreamer1.0-plugins-bad: add support for aom plugin
gstreamer1.0-plugins-bad: add support for x265 plugin
gstreamer1.0-plugins-bad: sctp plugin uses the internal usrsctp static lib
gstreamer1.0-plugins-bad: remove unsupported plugins comment
gstreamer1.0-plugins-bad: netsim plugin don't have external deps
gstreamer1.0-plugins-bad: transcode plugin external deps is always present
gstreamer1.0: use the correct meson option for the capabilities
shaderc: upgrade 2020.3 -> 2020.4
spirv-tools: upgrade 2020.5 -> 2020.6
Khairul Rohaizzat Jamaluddin (3):
openssl: Update 1.1.1h -> 1.1.1i
go: Update 1.15.5 -> 1.15.6
curl: Update 7.73.0 -> 7.74.0
Khem Raj (21):
musl: Update to latest master
systemd: Fix reallocarray check
go.bbclass: Use external linker for native packages
qemuriscv: check serial consoles w.r.t. /proc/consoles
busybox-inittab: Implement SYSVINIT_ENABLED_GETTYS and USE_VT
initscripts: use quotes for shell variable comparision
busybox: Install /etc/default/rcS when used as init system
busybox: Run mdev as daemon
rcS: Define identifier for init system used
initscripts: Use initctl on sysvinit only
busybox: Sync rcS.default with sysvinit
ltp: Fix ltp-pan crash on 32bit arches using 64bit time_t
pulseaudio: Fix build with clang for non-x86 target
util-linux: Build fixes for 32bit arches with 64bit time_t
libpam: Drop musl patches
ccache: Build fixes for clang and riscv32
shadow: Remove lastlog pam plugin on musl system
rxvt-unicode: Disable lastlog on musl systems
openssh: Disable lastlog on musl
dropbear: Disable lastlog and wtmp on musl
ccache: Fix build on aarch64/clang
Lee Chee Yang (2):
gdk-pixbuf: fix CVE-2020-29385
wic/direct/kparser: ensure fsuuid for vfat and msdos align with format
Li Wang (2):
qemu: CVE-2020-25723
qemu: CVE-2020-28916
Luca Boccassi (6):
classes/kernel-fitimage: add ability to sign individual images
systemd: update 246 -> 247
systemd: add package config for systemd-oomd
systemd: ship new systemd-dissect in -extra-utils
systemd: set -Dmode=release as recommended by NEWS
systemd: add RRECOMMENDS for weak dependencies, if enabled
Mark Jonas (1):
parted: Make readline dependency optional
Martin Jansa (2):
license.bbclass: Add COMMON_LICENSE_DIR and LICENSE_PATH dirs to PSEUDO_IGNORE_PATHS
busybox.inc: install rcS, rcK and rcS.default only with busybox in VIRTUAL-RUNTIME_init_manager
Maxime Roussin-Bélanger (1):
meta: add missing descriptions in some support recipes
Michael Halstead (1):
releases: conf: add link to 3.2.1, update to include 3.2.1
Milan Shah (2):
oe-pkgdata-util: Added a test to verify oe-pkgdata-util without parameters
bitbake: utils: add docstrings to functions
Mingli Yu (1):
kbd: fix transaction conflict
Nathan Rossi (7):
gcc: Add patch to resolve i*86 tune configuration overrides
qemu.inc: Add seccomp PACKAGECONFIG option
ncurses: Prevent LDFLAGS being emitted in .pc files
which: add nativesdk to BBCLASSEXTEND
sed: add nativesdk to BBCLASSEXTEND
grep: add nativesdk to BBCLASSEXTEND
coreutils: enable xattrs by default for nativesdk
Ovidiu Panait (3):
timezone: upgrade to 2020e
timezone: upgrade to 2020f
variables: Add documentation for KERNEL_DTC_FLAGS
Paul Barker (8):
bitbake.conf: Prevent pyc file generation in pseudo context
documentation: Simplify oe_wiki and oe_home links
documentation: Simplify layerindex and layer links
documentation: Simplify remaining yocto_home links
profile-manual: Simplify yocto_bugs link
ref-manual: Simplify oe_lists link
documentation: Use https links where possible
selftest: Add argument to keep build dir
Paul Eggleton (11):
classes/kernel-fitimage: add variable for description
classes/kernel-fitimage: allow substituting mkimage command
classes/kernel-fitimage: add ability to add additional signing options
oe-selftest: move FIT image tests to their own module
oe-selftest: fitimage: Test for FIT_DESC
oe-selftest: fitimage: add test for signing FIT images
classes: minor corrections to kernel-fitimage section
variables: clarify KERNEL_ALT_IMAGETYPE reference
variables: explicitly state that UBOOT_MKIMAGE_DTCOPTS is optional
variables: Add documentation for new kernel-fitimage vars
ref-manual: use consistent capitalisation of U-Boot
Peter Kjellerstedt (7):
lib/oe/path: Add canonicalize()
bitbake.conf: Canonicalize paths in PSEUDO_IGNORE_PATHS
wic: Pass canonicalized paths in PSEUDO_IGNORE_PATHS
glibc: Make adjtime() for 32 bit support being called with delta == NULL
bitbake: cache: Make CoreRecipeInfo include rprovides_pkg for skipped recipes
bitbake: cooker: Include all packages a recipe provides in SkippedPackage.rprovides
apr-util: Only specify --with-dbm=gdbm if gdbm support is enabled
Richard Purdie (22):
pseudo: Drop patches merged into upstream branch
bitbake: data_smart: Ensure hash reflects vardepvalue flags correctly
linuxloader: Avoid confusing string concat errors
systemd: Ensure uid/gid ranges are set deterministically
grub: Fix build reproducibility issue
u-boot-tools: Fix reproducibility issue
grub: Add second fix for determinism issue
oeqa/commands: Ensure sync can be found regardless of PATH
cups: Mark CVE-2009-0032 as a non-issue
cups: Mark CVE-2008-1033 as a non-issue
groff: Fix reproducibility issue
man-db: Avoid reproducibility failures after fixing groff-native
meta-selftest/staticids: Add ids for other recipes
selftest/reproducible: Add useradd-staticids to reproducible builds tests
grub: Further reproducibility fix
man-db: Fix reproducibility issue
bitbake.conf: Add mkfifo to HOSTTOOLS
bitbake.conf: Add /run/ to PSEUDO_IGNORE_PATHS
ppp: Update 2.4.8 -> 2.4.9
ppp: Fix reproducibility issue
sanity: Bump min python version to 3.6
pseudo: Add lchmod wrapper
Robert Yang (6):
buildtools-tarball.bb: Fix PATH for environment setup script
ncurses: Make ncurses-tools depend on ncurses-terminfo-base
minicom: RDEPENDS on ncurses-terminfo-base
archiver.bbclass: Fix --runall=deploy_archives for images
ccache: Extend to nativesdk
ccache.bbclass: Set CCACHE_TEMPDIR
Ross Burton (13):
wic-image-minimal: only depend on syslinux on x86 targets
syslinux: rewrite recipe so only target code is x86-specific
wic-tools: don't build syslinux-native for targets without syslinux
image-uefi.conf: add EFI arch variable
systemd-boot: build the EFI stub
systemd-boot: allow building for Arm targets
wic-tools: add grub-efi and systemd-boot on arm64
lib/oe/qa: handle the 'no specific instruction set' ELF e_machine value
local.conf: add aarch64 to the SDKMACHINE example values
kernel: set COMPATIBLE_HOST to *-linux
bitbake.conf: default SDKMACHINE to the build host architecture
diffstat: point the license checksum at the license
ruby: remove tcl DEPENDS
Scott Murray (2):
grub: fix "CVE:" line in one of the patches
patch: fix CVE-2019-20633
Sinan Kaya (1):
gcsections: add more suppressions for SDK builds
Steve Sakoman (1):
oeqa/selftest/cases/devtool.py: fix typo in ignore_patterns call
Tanu Kaskinen (6):
maintainers.inc: remove myself from maintainers
pulseaudio: Remove OE_LT_RPATH_ALLOW
pulseaudio: disable EsounD support
pulseaudio: disable GConf support
pulseaudio: switch build system from Autotools to Meson
pulseaudio: fix client.conf location
Teoh Jay Shen (2):
oeqa/terminal : improve the test case
oeqa/suspend : add test for suspend state
Tim Orling (6):
python3-hypothesis: upgrade 5.41.4 -> 5.41.5
python3-importlib-metadata: upgrade 3.1.0 -> 3.1.1
python3-pygments: upgrade v2.7.2 -> v2.7.3
python3-setuptools: upgrade 50.3.2 -> 51.0.0
python3-setuptools-scm: add python3-toml dep
python3-packaging: upgrade 20.4 -> 20.8
Tomasz Dziendzielski (1):
populate_sdk_base: Fix condition syntax if SDK_RELOCATE_AFTER_INSTALL is disabled
Trevor Woerner (7):
mesa.inc: switch true/enabled false/disabled
mesa: update 20.2.4 -> 20.3.1
insane.bbclass: allow fifos
selftest-chown: add test for fifos
PSPLASH_FIFO_DIR: refactor
psplash: fix working on first boot (sysvinit)
psplash (sysvinit): add textual updates
Vivien Didelot (4):
README.hardware: prettify headline
README.hardware: fix the dd command
meta-yocto-bsp: use provided variables
meta-yocto-bsp: use mmcblk0 for root partition
Wang Mingyu (4):
libaio: upgrade 0.3.111 -> 0.3.112
readline: upgrade 8.0 -> 8.1
man-pages: upgrade 5.09 ->5.10
mobile-broadband-provider-info: upgrade 20190618 ->20201225
Yi Zhao (6):
dhcpcd: upgrade 9.3.2 -> 9.3.4
dhcpcd: fix SECCOMP for i386
inetutils: add dnsdomainname to ALTERNATIVE
libcap: update 2.45 -> 2.46
libcap-ng: upgrade 0.8.1 -> 0.8.2
dhcpcd: upgrade 9.3.4 -> 9.4.0
Zhixiong Chi (1):
glibc: CVE-2020-29562 and CVE-2020-29573
zangrc (3):
bash: Rename patch name
systemtap: upgrade 4.3 -> 4.4
msmtp: upgrade 1.8.13 -> 1.8.14
zhengruoqin (2):
cantarell-fonts: upgrade 0.201 -> 0.301
gdbm: upgrade 1.18.1 -> 1.19
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I9000a711651a4e884e8bfccc438c95fce184b35e
diff --git a/poky/documentation/overview-manual/concepts.rst b/poky/documentation/overview-manual/concepts.rst
index 8fbbabb..257de44 100644
--- a/poky/documentation/overview-manual/concepts.rst
+++ b/poky/documentation/overview-manual/concepts.rst
@@ -141,12 +141,10 @@
using a different layer where that metadata might be common across
several pieces of hardware.
-Many layers exist that work in the Yocto Project development
-environment. The `Yocto Project Curated Layer
-Index <https://www.yoctoproject.org/software-overview/layers/>`__
-and `OpenEmbedded Layer
-Index <http://layers.openembedded.org/layerindex/branch/master/layers/>`__
-both contain layers from which you can use or leverage.
+Many layers exist that work in the Yocto Project development environment. The
+:yocto_home:`Yocto Project Curated Layer Index </software-overview/layers/>`
+and :oe_layerindex:`OpenEmbedded Layer Index <>` both contain layers from
+which you can use or leverage.
By convention, layers in the Yocto Project follow a specific form.
Conforming to a known structure allows BitBake to make assumptions
@@ -380,13 +378,11 @@
- *Metadata (.bb + Patches):* Software layers containing
user-supplied recipe files, patches, and append files. A good example
- of a software layer might be the
- `meta-qt5 layer <https://github.com/meta-qt5/meta-qt5>`__ from
- the `OpenEmbedded Layer
- Index <http://layers.openembedded.org/layerindex/branch/master/layers/>`__.
- This layer is for version 5.0 of the popular
- `Qt <https://wiki.qt.io/About_Qt>`__ cross-platform application
- development framework for desktop, embedded and mobile.
+ of a software layer might be the :oe_layer:`meta-qt5 layer </meta-qt5>`
+ from the :oe_layerindex:`OpenEmbedded Layer Index <>`. This layer is for
+ version 5.0 of the popular `Qt <https://wiki.qt.io/About_Qt>`__
+ cross-platform application development framework for desktop, embedded and
+ mobile.
- *Machine BSP Configuration:* Board Support Package (BSP) layers (i.e.
"BSP Layer" in the following figure) providing machine-specific
@@ -2096,10 +2092,8 @@
the BitBake keyword/variable flag that requests a fake root environment
for a task.
-In the :term:`OpenEmbedded Build System`,
-the program that
-implements fakeroot is known as
-`Pseudo <https://www.yoctoproject.org/software-item/pseudo/>`__. Pseudo
+In the :term:`OpenEmbedded Build System`, the program that implements
+fakeroot is known as :yocto_home:`Pseudo </software-item/pseudo/>`. Pseudo
overrides system calls by using the environment variable ``LD_PRELOAD``,
which results in the illusion of running as root. To keep track of
"fake" file ownership and permissions resulting from operations that
diff --git a/poky/documentation/overview-manual/development-environment.rst b/poky/documentation/overview-manual/development-environment.rst
index 9a2997d..011a479 100644
--- a/poky/documentation/overview-manual/development-environment.rst
+++ b/poky/documentation/overview-manual/development-environment.rst
@@ -40,7 +40,7 @@
Microsoft Corporation.
Wikipedia has a good historical description of the Open Source
-Philosophy `here <http://en.wikipedia.org/wiki/Open_source>`__. You can
+Philosophy `here <https://en.wikipedia.org/wiki/Open_source>`__. You can
also find helpful information on how to participate in the Linux
Community
`here <https://www.kernel.org/doc/html/latest/process/index.html>`__.
@@ -291,7 +291,7 @@
practices or methods that help development run smoothly. The following
list describes some of these practices. For more information about Git
workflows, see the workflow topics in the `Git Community
-Book <http://book.git-scm.com>`__.
+Book <https://book.git-scm.com>`__.
- *Make Small Changes:* It is best to keep the changes you commit small
as compared to bundling many disparate changes into a single commit.
@@ -368,12 +368,12 @@
.. note::
- For more information on Git, see
- http://git-scm.com/documentation.
+ https://git-scm.com/documentation.
- If you need to download Git, it is recommended that you add Git to
your system through your distribution's "software store" (e.g. for
Ubuntu, use the Ubuntu Software feature). For the Git download
- page, see http://git-scm.com/download.
+ page, see https://git-scm.com/download.
- For information beyond the introductory nature in this section,
see the ":ref:`dev-manual/start:locating yocto project source files`"
@@ -507,7 +507,7 @@
you understand the basic philosophy behind Git. You do not have to be an
expert in Git to be functional. A good place to look for instruction on
a minimal set of Git commands is
-`here <http://git-scm.com/documentation>`__.
+`here <https://git-scm.com/documentation>`__.
The following list of Git commands briefly describes some basic Git
operations as a way to get started. As with any set of commands, this
@@ -614,10 +614,10 @@
this history, you can find basic information here:
- `Open source license
- history <http://en.wikipedia.org/wiki/Open-source_license>`__
+ history <https://en.wikipedia.org/wiki/Open-source_license>`__
- `Free software license
- history <http://en.wikipedia.org/wiki/Free_software_license>`__
+ history <https://en.wikipedia.org/wiki/Free_software_license>`__
In general, the Yocto Project is broadly licensed under the
Massachusetts Institute of Technology (MIT) License. MIT licensing
@@ -626,9 +626,9 @@
the GNU General Public License (GPL). Patches to the Yocto Project
follow the upstream licensing scheme. You can find information on the
MIT license
-`here <http://www.opensource.org/licenses/mit-license.php>`__. You can
+`here <https://www.opensource.org/licenses/mit-license.php>`__. You can
find information on the GNU GPL
-`here <http://www.opensource.org/licenses/LGPL-3.0>`__.
+`here <https://www.opensource.org/licenses/LGPL-3.0>`__.
When you build an image using the Yocto Project, the build process uses
a known list of licenses to ensure compliance. You can find this list in
@@ -646,11 +646,11 @@
The base list of licenses used by the build process is a combination of
the Software Package Data Exchange (SPDX) list and the Open Source
-Initiative (OSI) projects. `SPDX Group <http://spdx.org>`__ is a working
+Initiative (OSI) projects. `SPDX Group <https://spdx.org>`__ is a working
group of the Linux Foundation that maintains a specification for a
standard format for communicating the components, licenses, and
copyrights associated with a software package.
-`OSI <http://opensource.org>`__ is a corporation dedicated to the Open
+`OSI <https://opensource.org>`__ is a corporation dedicated to the Open
Source Definition and the effort for reviewing and approving licenses
that conform to the Open Source Definition (OSD).
diff --git a/poky/documentation/overview-manual/yp-intro.rst b/poky/documentation/overview-manual/yp-intro.rst
index 66a88c9..0ec7e2b 100644
--- a/poky/documentation/overview-manual/yp-intro.rst
+++ b/poky/documentation/overview-manual/yp-intro.rst
@@ -221,8 +221,7 @@
- Familiarize yourself with the `Yocto Project curated layer
index <https://www.yoctoproject.org/software-overview/layers/>`__
- or the `OpenEmbedded layer
- index <http://layers.openembedded.org/layerindex/branch/master/layers/>`__.
+ or the :oe_layerindex:`OpenEmbedded layer index <>`.
The latter contains more layers but they are less universally
validated.
@@ -364,13 +363,12 @@
versions available for Yocto Project. The main purpose of the system
is to help you manage the recipes you maintain and to offer a dynamic
overview of the project. The Recipe Reporting System is built on top
- of the `OpenEmbedded Layer
- Index <http://layers.openembedded.org/layerindex/layers/>`__, which
+ of the :oe_layerindex:`OpenEmbedded Layer Index <>`, which
is a website that indexes OpenEmbedded-Core layers.
- *Patchwork:* `Patchwork <http://jk.ozlabs.org/projects/patchwork/>`__
is a fork of a project originally started by
- `OzLabs <http://ozlabs.org/>`__. The project is a web-based tracking
+ `OzLabs <https://ozlabs.org/>`__. The project is a web-based tracking
system designed to streamline the process of bringing contributions
into a project. The Yocto Project uses Patchwork as an organizational
tool to handle patches, which number in the thousands for every
@@ -402,7 +400,7 @@
Historically, cross-prelink is a variant of prelink, which was
conceived by `Jakub
- Jelínek <http://people.redhat.com/jakub/prelink.pdf>`__ a number of
+ Jelínek <https://people.redhat.com/jakub/prelink.pdf>`__ a number of
years ago. Both prelink and cross-prelink are maintained in the same
repository albeit on separate branches. By providing an emulated
runtime dynamic linker (i.e. ``glibc``-derived ``ld.so`` emulation),
@@ -531,8 +529,7 @@
Debian Package (dpkg) in operation.
Opkg is intended for use on embedded Linux devices and is used in
- this capacity in the
- `OpenEmbedded <http://www.openembedded.org/wiki/Main_Page>`__ and
+ this capacity in the :oe_home:`OpenEmbedded <>` and
`OpenWrt <https://openwrt.org/>`__ projects, as well as the Yocto
Project.