meta-hpe: dl360-g11 power sequencing
Signed-off-by: Andrew Neyland <andrew.neyland@hpe.com>
Change-Id: I991a2519850214a547b8129281d043a5f8af9d9e
diff --git a/meta-hpe/meta-dl360-g11/recipes-hpe/power-sequencing/files/gpios-manager.sh b/meta-hpe/meta-dl360-g11/recipes-hpe/power-sequencing/files/gpios-manager.sh
new file mode 100644
index 0000000..a8dca6f
--- /dev/null
+++ b/meta-hpe/meta-dl360-g11/recipes-hpe/power-sequencing/files/gpios-manager.sh
@@ -0,0 +1,72 @@
+#!/bin/sh
+# File which is managing GPIOS when detected. First parameter is which GPIOs that switched
+if [ "$1" = "up" ]
+then
+ busctl set-property xyz.openbmc_project.Chassis.Gpios /xyz/openbmc_project/chassis/gpios xyz.openbmc_project.Chassis.Gpios PGood b true
+ devmem 0x80fc0230 8 0x1
+ sleep 2
+ devmem 0x80fc0230 8 0x1
+ # Activate local UBM (front NVME drive)
+
+ devmem 0xd1000087 8 1
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 2
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 3
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 4
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000088 8 5
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 6
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 7
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 8
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 9
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 0xa
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 0xb
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 0xc
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 0xd
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 0xe
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000087 8 0xf
+ i2ctransfer -y 3 w4@0x40 0x34 0xbf 0x00 0xe8
+
+ devmem 0xd1000088 8 3
+ i2ctransfer -y 4 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd1000088 8 4
+ i2ctransfer -y 4 w4@0x40 0x34 0xbf 0x00 0xe8
+
+ devmem 0xd100008a 8 0x13
+ i2ctransfer -y 6 w4@0x40 0x34 0xbf 0x00 0xe8
+ devmem 0xd100008a 8 0x14
+ i2ctransfer -y 6 w4@0x40 0x34 0xbf 0x00 0xe8
+
+# systemctl restart xyz.openbmc_project.EntityManager.service
+# systemctl restart phosphor-pid-control.service
+else
+ if [ "$1" = "down" ]
+ then
+ busctl set-property xyz.openbmc_project.Chassis.Gpios /xyz/openbmc_project/chassis/gpios xyz.openbmc_project.Chassis.Gpios PGood b false
+ # We can re-init the system
+ devmem 0xd1000009 8 0x24
+ # We need to check the reason why we have been shutdown
+ shutdownReason=$(devmem 0x80000074 16)
+ # If bit 10 is set Software initiated a shutdown we need to restart
+ isSet2=$(( shutdownReason | 0xFBFF ))
+ if [ "$isSet2" = "65535" ]
+ then
+ echo "Restarting" >> /tmp/gpios
+ dbus-send --system --dest=xyz.openbmc_project.State.Host --print-reply --type=method_call /xyz/openbmc_project/state/host0 org.freedesktop.DBus.Properties.Set string:RequestedHostTransition variant:string:xyz.openbmc_project.State.Host.Transition.On
+ obmcutil poweron
+ fi
+ fi
+fi
+echo "$1" >> /tmp/gpios.txt