subtree updates
poky: 94dfcaff64..359e1cb62f:
Alexander Kanavin (76):
tcf-agent: fetching over git:// no longer works
lighttpd: convert from autotools to meson
libxcrypt: upgrade 4.4.23 -> 4.4.25
python3-cython: upgrade 0.29.23 -> 0.29.24
python3-numpy: upgrade 1.21.0 -> 1.21.2
systemd: upgrade 249.1 -> 249.3
xeyes: upgrade 1.1.2 -> 1.2.0
btrfs-tools: update 5.13 -> 5.13.1
diffutils: update 3.7 -> 3.8
mc: update 4.8.26 - > 4.8.27
libsdl2: update 2.0.14 -> 2.0.16
vulkan-samples: update to latest revision
pulseaudio: update 14.2 -> 15.0
libjitterentropy: update 3.0.2 -> 3.1.0
usbutils: upgrade 013 -> 014
inetutils: upgrade 2.0 -> 2.1
mobile-broadband-provider-info: upgrade 20201225 -> 20210805
glib-networking: upgrade 2.68.1 -> 2.68.2
e2fsprogs: upgrade 1.46.2 -> 1.46.4
help2man: upgrade 1.48.3 -> 1.48.4
libedit: upgrade 20210522-3.1 -> 20210714-3.1
log4cplus: upgrade 2.0.6 -> 2.0.7
mtools: upgrade 4.0.34 -> 4.0.35
patchelf: upgrade 0.12 -> 0.13
pkgconf: upgrade 1.7.4 -> 1.8.0
python3-git: upgrade 3.1.18 -> 3.1.20
python3-pip: upgrade 21.2.1 -> 21.2.4
python3-pygments: upgrade 2.9.0 -> 2.10.0
python3-setuptools: upgrade 57.1.0 -> 57.4.0
squashfs-tools: upgrade 4.4 -> 4.5
acpica: upgrade 20210331 -> 20210730
libidn2: upgrade 2.3.1 -> 2.3.2
stress-ng: upgrade 0.12.12 -> 0.13.00
sudo: upgrade 1.9.7p1 -> 1.9.7p2
epiphany: upgrade 40.2 -> 40.3
libgudev: upgrade 236 -> 237
libjpeg-turbo: upgrade 2.1.0 -> 2.1.1
libepoxy: upgrade 1.5.8 -> 1.5.9
pango: upgrade 1.48.7 -> 1.48.9
mesa: upgrade 21.1.5 -> 21.2.1
libinput: upgrade 1.18.0 -> 1.18.1
libxfont2: upgrade 2.0.4 -> 2.0.5
libxft: upgrade 2.3.3 -> 2.3.4
xserver-xorg: upgrade 1.20.12 -> 1.20.13
linux-firmware: upgrade 20210511 -> 20210818
wireless-regdb: upgrade 2021.04.21 -> 2021.07.14
libwebp: upgrade 1.2.0 -> 1.2.1
webkitgtk: upgrade 2.32.2 -> 2.32.3
boost: upgrade 1.76.0 -> 1.77.0
diffoscope: upgrade 179 -> 181
enchant2: upgrade 2.3.0 -> 2.3.1
re2c: upgrade 2.1.1 -> 2.2
rng-tools: upgrade 6.13 -> 6.14
kea: backport a patch to fix build errors exposed by latest update batch
qemu: add a hint on how to enable CPU render nodes when a suitable GPU is absent
mc: fix reproducibility
libjitterentropy: remove contaminated hashequiv entry
binutils: drop target flex/bison from build dependencies
gnu-efi: update 3.0.13 -> 3.0.14
glib-2.0: upgrade 2.68.3 -> 2.68.4
util-linux: upgrade 2.37.1 -> 2.37.2
ccache: upgrade 4.3 -> 4.4
git: upgrade 2.32.0 -> 2.33.0
openssh: upgrade 8.6p1 -> 8.7p1
ell: upgrade 0.42 -> 0.43
python3-mako: upgrade 1.1.4 -> 1.1.5
vala: upgrade 0.52.4 -> 0.52.5
libnsl2: upgrade 1.3.0 -> 2.0.0
gi-docgen: upgrade 2021.6 -> 2021.7
json-glib: upgrade 1.6.2 -> 1.6.4
bind: upgrade 9.16.19 -> 9.16.20
harfbuzz: upgrade 2.8.2 -> 2.9.0
qemurunner.py: print output from runqemu/qemu-system in stop()
qemurunner.py: handle getOutput() having nothing to read
rust: fix upstream version checks
mesa: enable crocus driver for older intel graphics
Andreas Müller (2):
mesa: upgrade 21.1.5 -> 21.1.7
binutils: Apply upstream patch to fix 'too many open files' on qtwebengine
Andrej Valek (2):
busybox: 1.33.1 -> 1.34.0
vim: add option to disable NLS support
Andres Beltran (2):
buildhistory: Add output file listing package information
buildhistory: Label packages providing per-file dependencies in depends.dot
Andrey Zhizhikin (2):
lttng-modules: do not search in non-existing folder during install
nativesdk-packagegroup-sdk-host: add perl integer module
Armin Kuster (2):
lz4: Security Fix for CVE-2021-3520
lz4: remove rest of ptest artifacts
Bruce Ashfield (21):
linux-yocto/5.13: update to v5.13.7
linux-yocto/5.4: update to v5.4.137
linux-yocto/5.10: update to v5.10.55
linux-yocto/5.4: update to v5.4.139
linux-yocto/5.10: update to v5.10.57
linux-yocto/5.13: update to v5.13.9
linux-yocto/5.4: remove recipes
conf/machine: bump qemu preferred versions to 5.13
linux-yocto-dev: bump to v5.14+
lttng-modules: update to 2.13.0
kernel-devsrc: 5.14+ updates
kernel-devsrc: fix 5.14+ objtool compilation
poky/poky-tiny: set default kernel to 5.13
poky: set default kernel to 5.13
yocto-bsp: drop 5.4 bbappend
poky-alt: switch default kernel to 5.10
linux-yocto/5.13: update to v5.13.11
linux-yocto/5.10: update to v5.10.59
linux-yocto/5.13: update to v5.13.12
linux-yocto/5.10: update to v5.10.60
parselogs.py: ignore intermittent CD/DVDROM identification failure
Chen Qi (1):
package_rpm/update-alternatives: fix package's provides
Daniel Gomez (2):
wic: Add --no-fstab-update part option
oeqa: wic: Add tests for --no-fstab-update
Denys Dmytriyenko (1):
grep: upgrade 3.6 -> 3.7
Enrico Scholz (1):
bitbake: fetch2/wget: fix 'no_proxy' handling
Hongxu Jia (2):
nativesdk-pseudo: Fix to work with glibc 2.34 systems
glibc: fix create thread failed in unprivileged process
Hsia-Jun Li (1):
lib/oe/elf: Add Android OS to machine_dict
Jon Mason (8):
arch-armv8m-main: missing space
conf/machine: move tune files to architecture directories
yocto-bsp: update machine confs with new tune locations
docs: update docs with new tune locations
arch-arm*: add better support for gcc march extensions
tune-cortexr*: add support for all Arm Cortex-R processors
arch-arm*: Fix bugs with dsp and simd feature include files
tune-*: Use more specific DEFAULTTUNE
Jose Quaresma (1):
sstate.bbclass: get the number of threads from BB_NUMBER_THREADS
Joshua Watt (17):
bitbake: contrib: vim: Add "remove" override highlighting
bitbake.conf: Add lz4c, pzstd and zstd
bitbake: bitbake: asyncrpc: Defer all asyncio to child process
conf/licenses: Add FreeType SPDX mapping
tzdata: Remove BSD License specifier
glib-2.0: Use specific BSD license variant
e2fsprogs: Use specific BSD license variant
shadow: Use specific BSD license variant
libcap: Use specific BSD license variant
sudo: Use specific BSD license variant
libpam: Use specific BSD license variant
libxfont2: Use specific BSD license variant
libjitterentropy: Use specific BSD license variant
libx11: Use specific BSD license variant
font-util: Use specific BSD license variant
flac: Use specific BSD license variant
swig: Use specific BSD license variant
Kai Kang (2):
libcgroup: fix installed-vs-shipped qa issue
rustfmt: fix SRC_URI
Kevin Hao (2):
meta-yocto-bsp: Set the default kernel to v5.13
meta-yocto-bsp: Bump the kernel to v5.13.11
Khem Raj (2):
weston: Re-order gbm destruction at DRM-backend tear down
musl: Update to latest tip of trunk
Kristian Klausen (1):
systemd: Add repart PACKAGECONFIG
Marco Felsch (1):
bitbake: bitbake: bitbake-layers: add skip reason to output
Marek Vasut (1):
weston: Add rdp PACKAGECONFIG
Marta Rybczynska (1):
lzo: add CVE_PRODUCT
Martin Jansa (3):
bitbake: prserv: handle PRSERV_HOST = "127.0.0.1:0" the same as "localhost:0"
bitbake: cooker/process: Fix typos in exiting message
rust: remove unused patches
Michael Halstead (2):
uninative: Upgrade to 3.3, support glibc 2.34
uninative: Upgrade to 3.4
Michael Opdenacker (2):
maintainers.inc: maintainer for alsa-*, flac, lame and speex
meta: stop using "virtual/" in RPROVIDES and RDEPENDS
Mingli Yu (2):
shadow: fix default value in SHA_get_salt_rounds()
bitbake: prserv: make localhost work
Oleksandr Popovych (1):
utils: Reduce the number of calls to the "dirname" command
Oliver Kranz (1):
Allow global override of golang GO_DYNLINK
Paul Barker (2):
bitbake: prserv: Replace XML RPC with modern asyncrpc implementation
bitbake: prserv: Add read-only mode
Paul Gortmaker (1):
ltp: backport ioctl_ns05 fix from upstream
Peter Kjellerstedt (7):
lttng-modules: Make it build when CONFIG_TRACEPOINTS is not enabled again
poky-floating-revisions.inc: Use new override syntax for commented vars
local.conf.sample: Use the new override syntax for a commented variable
bitbake.conf: Use the new variable override syntax in a comment
buildhistory-collect-srcrevs: Adapt to the new variable override syntax
meson.bbclass: Make the default buildtype "debug" if DEBUG_BUILD is 1
bitbake: providers: Use new override syntax when handling pn- "override"
Purushottam Choudhary (1):
assimp: added patch to fix hardcoded non-existing paths in CMake modules
Randy MacLeod (8):
openssl: upgrade from 1.1.1k to 1.1.1l
rust: initial merge of most of meta-rust
rust: mv README.md to recipes-devtools/rust/README-rust.md
rust: update the README to conform to being in oe-core
cargo/rust/rustfmt: exclude from world
maintainers: Add myself as maintainer for rust pkgs
cargo_common: remove http_proxy
rust: remove Rust version 1.51.0 toolchain
Richard Purdie (27):
elfutils: Add zstd PACKAGECONFIG for determinism
man-db: Add compression PACKAGECONFIG entries
oeqa/selftest/glibc: Handle incorrect encoding issuesin glibc test results
package/scripts: Fix FILES_INFO handling
package: Fix overrides converion issue with PKGSIZE
bitbake: bitbake: Make 3.6.0 the minimum python version
elfutils: Fix ptest dependencies
bsp-guide: Fix reference to bbappend section of dev-manual
ref-manual: Fix reference to bbappend section of dev-manual
gcc: Fix nativesdk builds and multilib fixes with gcc 11
bitbake: README: Add note about test suite and new tests
pseudo: Fix to work with glibc 2.34 systems
bitbake: README: Fix typo
rust-cross*: Fix OVERRRIDE references in task signature computation
rust-cross-canadian-common: Use rust.inc directly, not rust-target
cargo: Ensure cargo-cross-canadian doesn't have native/nativesdk versions
rust-native: Avoid stripped warning
rust-llvm: Add missing HOMEPAGE
rust: Skip target recipe since it doesn't work
oeqa/selftest/distrodata: Fix up rust maintainer testing
rust: Avoid buildtools+uninative issues with glibc symbols mismatches
rust-common: Add LDFLAGS to cc wrapper
oeqa/selftest/reproducibile: Exclude rust packages
kernel: Use unexpanded EXTENDPKGV
oeqa/buildtools-cases: Allow bitbake time to shutdown
cargo: Apply uninative fix to snapshot as with rust
rust-common: Hack around LD_LIBRARY_PATH issues on centos7
Robert P. J. Day (1):
scripts/lib/wic/help/py: "Redhat" -> "Red Hat"
Ross Burton (11):
oeqa/selftest/buildoptions: test buildhistory PKGSIZE and FILELIST fields
uninative: Improve glob to handle glibc 2.34
oeqa/sdk: add relocation test for buildtools
glibc: package the stub .a libaries into glibc-dev
oeqa/sdk: add HTTPS test for buildtools
libcgroup: upgrade to 2.0
gcc: also relocate the musl loader
local.conf.sample.extended: fix commented-out override syntax
cpio: backport fix for CVE-2021-38185
mesa: fix build on Arm V5 with soft float
ptest: allow the ptest-packagelists.inc warning to be disabled
Sakib Sajal (1):
qemu: fix CVE-2021-3682
Scott Murray (2):
bitbake: bitbake: asyncrpc: always create new asyncio loops
prservice: remove connection caching
Stefan Herbrechtsmeier (4):
u-boot: Remove redundancy from installed and deployed SPL artifact names
u-boot: Remove misplaced configuration type variable
u-boot: Make SPL suffix configurable
u-boot: Make UBOOT_BINARYNAME configurable
Tim Orling (7):
python3-importlib-metadata: upgrade 4.6.3 -> 4.6.4
python3-hypothesis: upgrade 6.14.5 -> 6.14.8
python3-hypothesis: upgrade 6.14.8 -> 6.15.0
python3-hypothesis: enable ptest
python3-pluggy: upgrade 0.13.1 -> 1.0.0
python3-pytest: allow python3-pluggy >=1.0.0
rust-common.bbclass: export RUST_TARGET_PATH
Trevor Gamblin (1):
bluez: upgrade 5.60 -> 5.61
Trevor Woerner (1):
distro_features_check: expand with IMAGE_FEATURES
Vinay Kumar (2):
glibc: Fix CVE-2021-38604
rust-common.inc: Fix build failure with qemuppc64.
Yi Zhao (2):
prelink: add PACKAGECONFIG for selinux
shadow: add /etc/default/useradd
Zoltán Böszörményi (4):
kernel-module-split.bbclass: Support zstd-compressed modules
Allow opt-out of split kernel modules
kernel.bbclass: Use full versions for inter-package dependencies
base/kernel: Support zstd-compressed squashfs and cpio initramfs
leimaohui (2):
Fix conflict error when enable multilib.
wordsize.h: Fix a miss, this file in arm and aarch64 should be the same.
meta-raspberrypi: 32921fc9bd..a6fa6b3aec:
Khem Raj (4):
machines: Use tune files from new location in oe-core
linux-raspberrypi: Update to 5.10.59
raspberrypi-firmware: Update to latest
raspberrypi4: Use full kms (vc4-kms-v3d) DT overlay
Marcus Comstedt (1):
pi-bluetooth: Add compatibility with non-systemd builds
Tom Rini (1):
xserver-xf86-config: Correctly append to FILES:${PN}
meta-security: c885d399cd..1f18c623e9:
Armin Kuster (10):
cryfs: add new package
kas-security-bas: bump conf value
kas: fix DISTRO appends
dm-verity-img.bbclass: more overided fixups
krill: Rust is in core now
suricata: rust is in core
layer.conf: drop dynamic-layer
layer.conf: drop meta-rust
harden-image-minimal: fix useradd inherit
kas: remove rust layers
Daiane Angolini (1):
meta-integrity: kernel-modsign: Change weak default value
George Liu (1):
meta: Fix typos
Marta Rybczynska (2):
README: fix mailing lists
README: fix mailing lists and a typo
meta-openembedded: a13db91f19..9fdc7960ba:
Andreas Müller (6):
catch2: upgrade 2.13.6 -> 2.13.7
fltk/CMake: Do not export executable 'fluid'
fltk: upgrade 1.3.6 -> 1.3.7
network-manager-applet: upgrade 1.22.0 -> 1.24.0
networkmanager: upgrade 1.32.4 -> 1.32.8
udisks2: upgrade 2.9.2 -> 2.9.3
Anton Blanchard (2):
boost-url: Use GNUInstallDirs instead of hard wiring install directories
cereal: Use GNUInstallDirs instead of hard wiring install directories
Changqing Li (1):
linuxptp: upgrade 3.1 -> 3.1.1
Devendra Tewari (1):
android-tools: Add flag to enable adbd service (#147)
Dmitry Baryshkov (1):
image_types_sparse: stop using ext2simg
Easwar Hariharan (1):
chrony: Fix privdrop packageconfig
Joe Slater (1):
nginx: fix CVE-2021-3618
Justin Bronder (1):
hidapi: add rdep on glibc-gconv-utf-16
Khem Raj (7):
layer.conf: Add ttf-ipa to SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS on fontconfig
mpich: link explictly with libgcc
packagegroup-meta-networking: Add bmon
libnss-nisplus: Remove
pipewire: Upgrade to 0.3.34
bluealsa: Add recipe
apitrace: Enable on glibc >= 2.34
Leon Anavi (21):
python3-astroid: Upgrade 2.6.6 -> 2.7.0
python3-ujson: Upgrade 4.0.2 -> 4.1.0
python3-pycurl: Upgrade 7.44.0 -> 7.44.1
python3-websocket-client: Upgrade 1.1.0 -> 1.2.1
python3-bitarray: Upgrade 2.2.5 -> 2.3.0
python3-langtable: Upgrade 0.0.54 -> 0.0.56
python3-pandas: Upgrade 1.3.1 -> 1.3.2
python3-tzlocal: Upgrade 2.1 -> 3.0
python3-zeroconf: Upgrade 0.34.3 -> 0.36.0
python3-dbus-next: Upgrade 0.2.2 -> 0.2.3
python3-astroid: Upgrade 2.7.0 -> 2.7.1
python3-ruamel-yaml: Upgrade 0.17.10 -> 0.17.11
python3-unidiff: Upgrade 0.6.0 -> 0.7.0
python3-qrcode: Upgrade 7.2 -> 7.3
python3-simplejson: Upgrade 3.17.3 -> 3.17.4
python3-regex: Upgrade 2021.7.6 -> 2021.8.3
python3-colorlog: Upgrade 5.0.1 -> 6.4.1
python3-ruamel-yaml: Upgrade 0.17.11 -> 0.17.13
python3-simplejson: Upgrade 3.17.4 -> 3.17.5
python3-bitarray: Upgrade 2.3.0 -> 2.3.2
python3-watchdog: Upgrade 2.1.3 -> 2.1.5
Martin Jansa (1):
layer.conf: Add ttf-takao to SIGGEN_EXCLUDE_SAFE_RECIPE_DEPS on fontconfig
Matija Tudan (1):
gpsd: upgrade 3.20 -> 3.23
Matteo Croce (1):
libbpf: bump to 0.4.0
Michael Opdenacker (2):
meta-multimedia: stop using "virtual/" in RPROVIDES and RDEPENDS
meta-oe: stop using "virtual/" in RPROVIDES and RDEPENDS
Mingli Yu (4):
polkit: fix CVE-2021-3560
vsftpd: Upgrade to 3.0.5
mariadb: Upgrade to 10.6.4
jemalloc: improve reproducibility
Nathan Rossi (1):
nginx: Fix off_t size passed in configure
Oleksandr Kravchuk (6):
font-adobe-100dpi: fix UPSTREAM_CHECK_REGEX
font-adobe-utopia-100dpi: fix UPSTREAM_CHECK_REGEX
font-bh-100dpi: fix UPSTREAM_CHECK_REGEX
font-bh-lucidatypewriter-100dpi: fix UPSTREAM_CHECK_REGEX
font-bitstream-100dpi: fix UPSTREAM_CHECK_REGEX
xf86-input-tslib: update to 1.1.1
Patrick Areny (2):
libConfuse: Add recipe
bmon: Add recipe
Peter Kjellerstedt (6):
gpsd: Let scons install the udev and systemd files
gpsd: Move /usr/share/gpsd/doc to the gpsd-doc package
poppler: Explicitly enable/disable boost together with splash
chrony: Use new override syntax for USERADD_PARAM
gpsd: Correct the installation of gpsd.hotplug if systemd is not enabled
gpsd: Do not install gpsd.hotplug unconditionally
Peter Morrow (1):
libbpf: remove stale comment
Sakib Sajal (2):
lmdb: use libprefix in Makefile to install libraries
gd: fix CVE-2021-38115
Sinan Kaya (4):
c-ares: remove custom patches
grpc: make SHARED library build optional
libkcapi: add a hash only packageconfig
libkcapi: allow an option to build natively
Tim Orling (2):
bootchart: drop; unfetchable
python3-django_2.2.x: only check upstream 2.2.x
Trevor Gamblin (5):
python3-click: Add missing ptest artifacts
python3-eventlet: add 0.30.2 to meta-python
python3-gunicorn: tweak run-ptest, add RDEPENDS
python3-license-expression: add ptest artifacts
nftables: upgrade 0.9.9 -> 1.0.0
Vesa Jääskeläinen (2):
python3-cached-property: Add recipe for version 1.5.2
python3-pkcs11: Add recipe for version 0.7.0
Yi Zhao (2):
audit: upgrade 3.0.4 -> 3.0.5
krb5: filtering out -f*-prefix-map from krb5-config
Zoltán Böszörményi (1):
metacity: Add a patch to create build/src/core before moving generated sources to it
leimaohui (3):
packagegroup-meta-oe: Update ttf-ipa package name.
uim: Dleted takao fonts from DEPENDS.
takao-fonts: It should be in ttf-fonts directory as the other ttf fonts.
wangmy (14):
fetchmail: upgrade 6.4.20 -> 6.4.21
c-ares: upgrade 1.17.1 -> 1.17.2
icewm: upgrade 2.6.0 -> 2.7.0
netplan: upgrade 0.102 -> 0.103
ctags: upgrade 5.9.20210801.0 -> 5.9.20210815.0
live555: upgrade 20210720 -> 20210809
opensc: upgrade 0.21.0 -> 0.22.0
xfsprogs: upgrade 5.12.0 -> 5.13.0
networkmanager: upgrade 1.32.8 -> 1.32.10
can-utils: upgrade 2021.06.0 -> 2021.08.0
doxygen: upgrade 1.9.1 -> 1.9.2
gensio: upgrade 2.2.8 -> 2.2.9
live555: upgrade 20210809 -> 20210824
sedutil: upgrade 1.15.1.01 -> 1.20.0
zangrc (14):
python3-flask-migrate: upgrade 3.0.1 -> 3.1.0
python3-flask-socketio: upgrade 5.1.0 -> 5.1.1
python3-google-api-python-client: upgrade 2.15.0 -> 2.17.0
python3-grpcio-tools: upgrade 1.38.1 -> 1.39.0
python3-grpcio: upgrade 1.38.1 -> 1.39.0
python3-wheel: upgrade 0.36.2 -> 0.37.0
libio-socket-ssl-perl: upgrade 2.071 -> 2.072
python3-aiohttp-jinja2: upgrade 1.4.2 -> 1.5
python3-gevent: upgrade 21.1.2 -> 21.8.0
python3-google-api-python-client: upgrade 2.17.0 -> 2.18.0
python3-h5py: upgrade 3.3.0 -> 3.4.0
python3-haversine: upgrade 2.3.1 -> 2.4.0
python3-pyephem: upgrade 3.7.7.1 -> 4.0.0.2
rdma-core: upgrade 35.0 -> 36.0
zhengruoqin (12):
libqmi: upgrade 1.28.8 -> 1.30.0
sedutil: upgrade 1.15.1 -> 1.15.1.01
libencode-perl: upgrade 3.11 -> 3.12
python3-pymisp: upgrade 2.4.144 -> 2.4.148
python3-pyzmq: upgrade 22.1.0 -> 22.2.1
python3-tqdm: upgrade 4.62.0 -> 4.62.2
iwd: upgrade 1.16 -> 1.17
xmlsec1: upgrade 1.2.31 -> 1.2.32
xrdb: upgrade 1.2.0 -> 1.2.1
python3-regex: upgrade 2021.8.3 -> 2021.8.27
python3-sqlalchemy: upgrade 1.4.22 -> 1.4.23
python3-stevedore: upgrade 3.3.0 -> 3.4.0
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: I2960f1ce53a1e2cde8b03b929829db9a2f105541
diff --git a/poky/bitbake/lib/bb/__init__.py b/poky/bitbake/lib/bb/__init__.py
index c1e3069..5c248d3 100644
--- a/poky/bitbake/lib/bb/__init__.py
+++ b/poky/bitbake/lib/bb/__init__.py
@@ -12,8 +12,8 @@
__version__ = "1.51.1"
import sys
-if sys.version_info < (3, 5, 0):
- raise RuntimeError("Sorry, python 3.5.0 or later is required for this version of bitbake")
+if sys.version_info < (3, 6, 0):
+ raise RuntimeError("Sorry, python 3.6.0 or later is required for this version of bitbake")
class BBHandledException(Exception):
diff --git a/poky/bitbake/lib/bb/asyncrpc/client.py b/poky/bitbake/lib/bb/asyncrpc/client.py
index 3eb4fdd..50e60d5 100644
--- a/poky/bitbake/lib/bb/asyncrpc/client.py
+++ b/poky/bitbake/lib/bb/asyncrpc/client.py
@@ -119,6 +119,16 @@
self.client = self._get_async_client()
self.loop = asyncio.new_event_loop()
+ # Override any pre-existing loop.
+ # Without this, the PR server export selftest triggers a hang
+ # when running with Python 3.7. The drawback is that there is
+ # potential for issues if the PR and hash equiv (or some new)
+ # clients need to both be instantiated in the same process.
+ # This should be revisited if/when Python 3.9 becomes the
+ # minimum required version for BitBake, as it seems not
+ # required (but harmless) with it.
+ asyncio.set_event_loop(self.loop)
+
self._add_methods('connect_tcp', 'close', 'ping')
@abc.abstractmethod
diff --git a/poky/bitbake/lib/bb/asyncrpc/serv.py b/poky/bitbake/lib/bb/asyncrpc/serv.py
index 4084f30..b4cffff 100644
--- a/poky/bitbake/lib/bb/asyncrpc/serv.py
+++ b/poky/bitbake/lib/bb/asyncrpc/serv.py
@@ -131,53 +131,55 @@
class AsyncServer(object):
- def __init__(self, logger, loop=None):
- if loop is None:
- self.loop = asyncio.new_event_loop()
- self.close_loop = True
- else:
- self.loop = loop
- self.close_loop = False
-
+ def __init__(self, logger):
self._cleanup_socket = None
self.logger = logger
+ self.start = None
+ self.address = None
+ self.loop = None
def start_tcp_server(self, host, port):
- self.server = self.loop.run_until_complete(
- asyncio.start_server(self.handle_client, host, port, loop=self.loop)
- )
+ def start_tcp():
+ self.server = self.loop.run_until_complete(
+ asyncio.start_server(self.handle_client, host, port)
+ )
- for s in self.server.sockets:
- self.logger.debug('Listening on %r' % (s.getsockname(),))
- # Newer python does this automatically. Do it manually here for
- # maximum compatibility
- s.setsockopt(socket.SOL_TCP, socket.TCP_NODELAY, 1)
- s.setsockopt(socket.SOL_TCP, socket.TCP_QUICKACK, 1)
+ for s in self.server.sockets:
+ self.logger.debug('Listening on %r' % (s.getsockname(),))
+ # Newer python does this automatically. Do it manually here for
+ # maximum compatibility
+ s.setsockopt(socket.SOL_TCP, socket.TCP_NODELAY, 1)
+ s.setsockopt(socket.SOL_TCP, socket.TCP_QUICKACK, 1)
- name = self.server.sockets[0].getsockname()
- if self.server.sockets[0].family == socket.AF_INET6:
- self.address = "[%s]:%d" % (name[0], name[1])
- else:
- self.address = "%s:%d" % (name[0], name[1])
+ name = self.server.sockets[0].getsockname()
+ if self.server.sockets[0].family == socket.AF_INET6:
+ self.address = "[%s]:%d" % (name[0], name[1])
+ else:
+ self.address = "%s:%d" % (name[0], name[1])
+
+ self.start = start_tcp
def start_unix_server(self, path):
def cleanup():
os.unlink(path)
- cwd = os.getcwd()
- try:
- # Work around path length limits in AF_UNIX
- os.chdir(os.path.dirname(path))
- self.server = self.loop.run_until_complete(
- asyncio.start_unix_server(self.handle_client, os.path.basename(path), loop=self.loop)
- )
- finally:
- os.chdir(cwd)
+ def start_unix():
+ cwd = os.getcwd()
+ try:
+ # Work around path length limits in AF_UNIX
+ os.chdir(os.path.dirname(path))
+ self.server = self.loop.run_until_complete(
+ asyncio.start_unix_server(self.handle_client, os.path.basename(path))
+ )
+ finally:
+ os.chdir(cwd)
- self.logger.debug('Listening on %r' % path)
+ self.logger.debug('Listening on %r' % path)
- self._cleanup_socket = cleanup
- self.address = "unix://%s" % os.path.abspath(path)
+ self._cleanup_socket = cleanup
+ self.address = "unix://%s" % os.path.abspath(path)
+
+ self.start = start_unix
@abc.abstractmethod
def accept_client(self, reader, writer):
@@ -205,8 +207,7 @@
self.logger.debug("Got exit signal")
self.loop.stop()
- def serve_forever(self):
- asyncio.set_event_loop(self.loop)
+ def _serve_forever(self):
try:
self.loop.add_signal_handler(signal.SIGTERM, self.signal_handler)
signal.pthread_sigmask(signal.SIG_UNBLOCK, [signal.SIGTERM])
@@ -217,28 +218,69 @@
self.loop.run_until_complete(self.server.wait_closed())
self.logger.debug('Server shutting down')
finally:
- if self.close_loop:
- if sys.version_info >= (3, 6):
- self.loop.run_until_complete(self.loop.shutdown_asyncgens())
- self.loop.close()
-
if self._cleanup_socket is not None:
self._cleanup_socket()
+ def serve_forever(self):
+ """
+ Serve requests in the current process
+ """
+ # Create loop and override any loop that may have existed in
+ # a parent process. It is possible that the usecases of
+ # serve_forever might be constrained enough to allow using
+ # get_event_loop here, but better safe than sorry for now.
+ self.loop = asyncio.new_event_loop()
+ asyncio.set_event_loop(self.loop)
+ self.start()
+ self._serve_forever()
+
def serve_as_process(self, *, prefunc=None, args=()):
- def run():
+ """
+ Serve requests in a child process
+ """
+ def run(queue):
+ # Create loop and override any loop that may have existed
+ # in a parent process. Without doing this and instead
+ # using get_event_loop, at the very minimum the hashserv
+ # unit tests will hang when running the second test.
+ # This happens since get_event_loop in the spawned server
+ # process for the second testcase ends up with the loop
+ # from the hashserv client created in the unit test process
+ # when running the first testcase. The problem is somewhat
+ # more general, though, as any potential use of asyncio in
+ # Cooker could create a loop that needs to replaced in this
+ # new process.
+ self.loop = asyncio.new_event_loop()
+ asyncio.set_event_loop(self.loop)
+ try:
+ self.start()
+ finally:
+ queue.put(self.address)
+ queue.close()
+
if prefunc is not None:
prefunc(self, *args)
- self.serve_forever()
+
+ self._serve_forever()
+
+ if sys.version_info >= (3, 6):
+ self.loop.run_until_complete(self.loop.shutdown_asyncgens())
+ self.loop.close()
+
+ queue = multiprocessing.Queue()
# Temporarily block SIGTERM. The server process will inherit this
# block which will ensure it doesn't receive the SIGTERM until the
# handler is ready for it
mask = signal.pthread_sigmask(signal.SIG_BLOCK, [signal.SIGTERM])
try:
- self.process = multiprocessing.Process(target=run)
+ self.process = multiprocessing.Process(target=run, args=(queue,))
self.process.start()
+ self.address = queue.get()
+ queue.close()
+ queue.join_thread()
+
return self.process
finally:
signal.pthread_sigmask(signal.SIG_SETMASK, mask)
diff --git a/poky/bitbake/lib/bb/cooker.py b/poky/bitbake/lib/bb/cooker.py
index b2d69c2..db99170 100644
--- a/poky/bitbake/lib/bb/cooker.py
+++ b/poky/bitbake/lib/bb/cooker.py
@@ -382,7 +382,7 @@
try:
self.prhost = prserv.serv.auto_start(self.data)
except prserv.serv.PRServiceConfigError as e:
- bb.fatal("Unable to start PR Server, exitting")
+ bb.fatal("Unable to start PR Server, exiting, check the bitbake-cookerdaemon.log")
if self.data.getVar("BB_HASHSERVE") == "auto":
# Create a new hash server bound to a unix domain socket
diff --git a/poky/bitbake/lib/bb/fetch2/wget.py b/poky/bitbake/lib/bb/fetch2/wget.py
index 29fcfbb..9a49e64 100644
--- a/poky/bitbake/lib/bb/fetch2/wget.py
+++ b/poky/bitbake/lib/bb/fetch2/wget.py
@@ -330,50 +330,51 @@
urllib.request.HTTPSHandler(context=context)]
opener = urllib.request.build_opener(*handlers)
- try:
- uri = ud.url.split(";")[0]
- r = urllib.request.Request(uri)
- r.get_method = lambda: "HEAD"
- # Some servers (FusionForge, as used on Alioth) require that the
- # optional Accept header is set.
- r.add_header("Accept", "*/*")
- r.add_header("User-Agent", self.user_agent)
- def add_basic_auth(login_str, request):
- '''Adds Basic auth to http request, pass in login:password as string'''
- import base64
- encodeuser = base64.b64encode(login_str.encode('utf-8')).decode("utf-8")
- authheader = "Basic %s" % encodeuser
- r.add_header("Authorization", authheader)
-
- if ud.user and ud.pswd:
- add_basic_auth(ud.user + ':' + ud.pswd, r)
-
try:
- import netrc
- n = netrc.netrc()
- login, unused, password = n.authenticators(urllib.parse.urlparse(uri).hostname)
- add_basic_auth("%s:%s" % (login, password), r)
- except (TypeError, ImportError, IOError, netrc.NetrcParseError):
- pass
+ uri = ud.url.split(";")[0]
+ r = urllib.request.Request(uri)
+ r.get_method = lambda: "HEAD"
+ # Some servers (FusionForge, as used on Alioth) require that the
+ # optional Accept header is set.
+ r.add_header("Accept", "*/*")
+ r.add_header("User-Agent", self.user_agent)
+ def add_basic_auth(login_str, request):
+ '''Adds Basic auth to http request, pass in login:password as string'''
+ import base64
+ encodeuser = base64.b64encode(login_str.encode('utf-8')).decode("utf-8")
+ authheader = "Basic %s" % encodeuser
+ r.add_header("Authorization", authheader)
- with opener.open(r) as response:
- pass
- except urllib.error.URLError as e:
- if try_again:
- logger.debug2("checkstatus: trying again")
- return self.checkstatus(fetch, ud, d, False)
- else:
- # debug for now to avoid spamming the logs in e.g. remote sstate searches
- logger.debug2("checkstatus() urlopen failed: %s" % e)
- return False
- except ConnectionResetError as e:
- if try_again:
- logger.debug2("checkstatus: trying again")
- return self.checkstatus(fetch, ud, d, False)
- else:
- # debug for now to avoid spamming the logs in e.g. remote sstate searches
- logger.debug2("checkstatus() urlopen failed: %s" % e)
- return False
+ if ud.user and ud.pswd:
+ add_basic_auth(ud.user + ':' + ud.pswd, r)
+
+ try:
+ import netrc
+ n = netrc.netrc()
+ login, unused, password = n.authenticators(urllib.parse.urlparse(uri).hostname)
+ add_basic_auth("%s:%s" % (login, password), r)
+ except (TypeError, ImportError, IOError, netrc.NetrcParseError):
+ pass
+
+ with opener.open(r) as response:
+ pass
+ except urllib.error.URLError as e:
+ if try_again:
+ logger.debug2("checkstatus: trying again")
+ return self.checkstatus(fetch, ud, d, False)
+ else:
+ # debug for now to avoid spamming the logs in e.g. remote sstate searches
+ logger.debug2("checkstatus() urlopen failed: %s" % e)
+ return False
+ except ConnectionResetError as e:
+ if try_again:
+ logger.debug2("checkstatus: trying again")
+ return self.checkstatus(fetch, ud, d, False)
+ else:
+ # debug for now to avoid spamming the logs in e.g. remote sstate searches
+ logger.debug2("checkstatus() urlopen failed: %s" % e)
+ return False
+
return True
def _parse_path(self, regex, s):
diff --git a/poky/bitbake/lib/bb/providers.py b/poky/bitbake/lib/bb/providers.py
index 516d45e..8c1c31a 100644
--- a/poky/bitbake/lib/bb/providers.py
+++ b/poky/bitbake/lib/bb/providers.py
@@ -94,7 +94,7 @@
# pn can contain '_', e.g. gcc-cross-x86_64 and an override cannot
# hence we do this manually rather than use OVERRIDES
- ver = cfgData.getVar("%s_VERSION_pn-%s" % (keyword, pn))
+ ver = cfgData.getVar("%s_VERSION:pn-%s" % (keyword, pn))
if not ver:
ver = cfgData.getVar("%s_VERSION_%s" % (keyword, pn))
if not ver:
diff --git a/poky/bitbake/lib/bb/server/process.py b/poky/bitbake/lib/bb/server/process.py
index 6127fd4..b593830 100644
--- a/poky/bitbake/lib/bb/server/process.py
+++ b/poky/bitbake/lib/bb/server/process.py
@@ -473,7 +473,7 @@
try:
r = ready.get()
except EOFError:
- # Trap the child exitting/closing the pipe and error out
+ # Trap the child exiting/closing the pipe and error out
r = None
if not r or r[0] != "r":
ready.close()
diff --git a/poky/bitbake/lib/bblayers/query.py b/poky/bitbake/lib/bblayers/query.py
index 947422a..6e94c83 100644
--- a/poky/bitbake/lib/bblayers/query.py
+++ b/poky/bitbake/lib/bblayers/query.py
@@ -154,7 +154,7 @@
def print_item(f, pn, ver, layer, ispref):
if not selected_layer or layer == selected_layer:
if not bare and f in skiplist:
- skipped = ' (skipped)'
+ skipped = ' (skipped: %s)' % self.tinfoil.cooker.skiplist[f].skipreason
else:
skipped = ''
if show_filenames:
diff --git a/poky/bitbake/lib/hashserv/server.py b/poky/bitbake/lib/hashserv/server.py
index 8e84989..a059e52 100644
--- a/poky/bitbake/lib/hashserv/server.py
+++ b/poky/bitbake/lib/hashserv/server.py
@@ -410,11 +410,11 @@
class Server(bb.asyncrpc.AsyncServer):
- def __init__(self, db, loop=None, upstream=None, read_only=False):
+ def __init__(self, db, upstream=None, read_only=False):
if upstream and read_only:
raise bb.asyncrpc.ServerError("Read-only hashserv cannot pull from an upstream server")
- super().__init__(logger, loop)
+ super().__init__(logger)
self.request_stats = Stats()
self.db = db
diff --git a/poky/bitbake/lib/prserv/client.py b/poky/bitbake/lib/prserv/client.py
new file mode 100644
index 0000000..a3f19dd
--- /dev/null
+++ b/poky/bitbake/lib/prserv/client.py
@@ -0,0 +1,48 @@
+#
+# SPDX-License-Identifier: GPL-2.0-only
+#
+
+import logging
+import bb.asyncrpc
+
+logger = logging.getLogger("BitBake.PRserv")
+
+class PRAsyncClient(bb.asyncrpc.AsyncClient):
+ def __init__(self):
+ super().__init__('PRSERVICE', '1.0', logger)
+
+ async def getPR(self, version, pkgarch, checksum):
+ response = await self.send_message(
+ {'get-pr': {'version': version, 'pkgarch': pkgarch, 'checksum': checksum}}
+ )
+ if response:
+ return response['value']
+
+ async def importone(self, version, pkgarch, checksum, value):
+ response = await self.send_message(
+ {'import-one': {'version': version, 'pkgarch': pkgarch, 'checksum': checksum, 'value': value}}
+ )
+ if response:
+ return response['value']
+
+ async def export(self, version, pkgarch, checksum, colinfo):
+ response = await self.send_message(
+ {'export': {'version': version, 'pkgarch': pkgarch, 'checksum': checksum, 'colinfo': colinfo}}
+ )
+ if response:
+ return (response['metainfo'], response['datainfo'])
+
+ async def is_readonly(self):
+ response = await self.send_message(
+ {'is-readonly': {}}
+ )
+ if response:
+ return response['readonly']
+
+class PRClient(bb.asyncrpc.Client):
+ def __init__(self):
+ super().__init__()
+ self._add_methods('getPR', 'importone', 'export', 'is_readonly')
+
+ def _get_async_client(self):
+ return PRAsyncClient()
diff --git a/poky/bitbake/lib/prserv/db.py b/poky/bitbake/lib/prserv/db.py
index cb2a246..2710d4a 100644
--- a/poky/bitbake/lib/prserv/db.py
+++ b/poky/bitbake/lib/prserv/db.py
@@ -30,21 +30,29 @@
#
class PRTable(object):
- def __init__(self, conn, table, nohist):
+ def __init__(self, conn, table, nohist, read_only):
self.conn = conn
self.nohist = nohist
+ self.read_only = read_only
self.dirty = False
if nohist:
self.table = "%s_nohist" % table
else:
self.table = "%s_hist" % table
- self._execute("CREATE TABLE IF NOT EXISTS %s \
- (version TEXT NOT NULL, \
- pkgarch TEXT NOT NULL, \
- checksum TEXT NOT NULL, \
- value INTEGER, \
- PRIMARY KEY (version, pkgarch, checksum));" % self.table)
+ if self.read_only:
+ table_exists = self._execute(
+ "SELECT count(*) FROM sqlite_master \
+ WHERE type='table' AND name='%s'" % (self.table))
+ if not table_exists:
+ raise prserv.NotFoundError
+ else:
+ self._execute("CREATE TABLE IF NOT EXISTS %s \
+ (version TEXT NOT NULL, \
+ pkgarch TEXT NOT NULL, \
+ checksum TEXT NOT NULL, \
+ value INTEGER, \
+ PRIMARY KEY (version, pkgarch, checksum));" % self.table)
def _execute(self, *query):
"""Execute a query, waiting to acquire a lock if necessary"""
@@ -59,8 +67,9 @@
raise exc
def sync(self):
- self.conn.commit()
- self._execute("BEGIN EXCLUSIVE TRANSACTION")
+ if not self.read_only:
+ self.conn.commit()
+ self._execute("BEGIN EXCLUSIVE TRANSACTION")
def sync_if_dirty(self):
if self.dirty:
@@ -75,6 +84,15 @@
return row[0]
else:
#no value found, try to insert
+ if self.read_only:
+ data = self._execute("SELECT ifnull(max(value)+1,0) FROM %s where version=? AND pkgarch=?;" % (self.table),
+ (version, pkgarch))
+ row = data.fetchone()
+ if row is not None:
+ return row[0]
+ else:
+ return 0
+
try:
self._execute("INSERT INTO %s VALUES (?, ?, ?, (select ifnull(max(value)+1,0) from %s where version=? AND pkgarch=?));"
% (self.table,self.table),
@@ -103,6 +121,15 @@
return row[0]
else:
#no value found, try to insert
+ if self.read_only:
+ data = self._execute("SELECT ifnull(max(value)+1,0) FROM %s where version=? AND pkgarch=?;" % (self.table),
+ (version, pkgarch))
+ row = data.fetchone()
+ if row is not None:
+ return row[0]
+ else:
+ return 0
+
try:
self._execute("INSERT OR REPLACE INTO %s VALUES (?, ?, ?, (select ifnull(max(value)+1,0) from %s where version=? AND pkgarch=?));"
% (self.table,self.table),
@@ -128,6 +155,9 @@
return self._getValueHist(version, pkgarch, checksum)
def _importHist(self, version, pkgarch, checksum, value):
+ if self.read_only:
+ return None
+
val = None
data = self._execute("SELECT value FROM %s WHERE version=? AND pkgarch=? AND checksum=?;" % self.table,
(version, pkgarch, checksum))
@@ -152,6 +182,9 @@
return val
def _importNohist(self, version, pkgarch, checksum, value):
+ if self.read_only:
+ return None
+
try:
#try to insert
self._execute("INSERT INTO %s VALUES (?, ?, ?, ?);" % (self.table),
@@ -245,19 +278,23 @@
class PRData(object):
"""Object representing the PR database"""
- def __init__(self, filename, nohist=True):
+ def __init__(self, filename, nohist=True, read_only=False):
self.filename=os.path.abspath(filename)
self.nohist=nohist
+ self.read_only = read_only
#build directory hierarchy
try:
os.makedirs(os.path.dirname(self.filename))
except OSError as e:
if e.errno != errno.EEXIST:
raise e
- self.connection=sqlite3.connect(self.filename, isolation_level="EXCLUSIVE", check_same_thread = False)
+ uri = "file:%s%s" % (self.filename, "?mode=ro" if self.read_only else "")
+ logger.debug("Opening PRServ database '%s'" % (uri))
+ self.connection=sqlite3.connect(uri, uri=True, isolation_level="EXCLUSIVE", check_same_thread = False)
self.connection.row_factory=sqlite3.Row
- self.connection.execute("pragma synchronous = off;")
- self.connection.execute("PRAGMA journal_mode = MEMORY;")
+ if not self.read_only:
+ self.connection.execute("pragma synchronous = off;")
+ self.connection.execute("PRAGMA journal_mode = MEMORY;")
self._tables={}
def disconnect(self):
@@ -270,7 +307,7 @@
if tblname in self._tables:
return self._tables[tblname]
else:
- tableobj = self._tables[tblname] = PRTable(self.connection, tblname, self.nohist)
+ tableobj = self._tables[tblname] = PRTable(self.connection, tblname, self.nohist, self.read_only)
return tableobj
def __delitem__(self, tblname):
diff --git a/poky/bitbake/lib/prserv/serv.py b/poky/bitbake/lib/prserv/serv.py
index 5e322bf..0a20b92 100644
--- a/poky/bitbake/lib/prserv/serv.py
+++ b/poky/bitbake/lib/prserv/serv.py
@@ -4,157 +4,135 @@
import os,sys,logging
import signal, time
-from xmlrpc.server import SimpleXMLRPCServer, SimpleXMLRPCRequestHandler
import socket
import io
import sqlite3
-import bb.server.xmlrpcclient
import prserv
import prserv.db
import errno
-import multiprocessing
+import bb.asyncrpc
logger = logging.getLogger("BitBake.PRserv")
-class Handler(SimpleXMLRPCRequestHandler):
- def _dispatch(self,method,params):
- try:
- value=self.server.funcs[method](*params)
- except:
- import traceback
- traceback.print_exc()
- raise
- return value
-
PIDPREFIX = "/tmp/PRServer_%s_%s.pid"
singleton = None
+class PRServerClient(bb.asyncrpc.AsyncServerConnection):
+ def __init__(self, reader, writer, table, read_only):
+ super().__init__(reader, writer, 'PRSERVICE', logger)
+ self.handlers.update({
+ 'get-pr': self.handle_get_pr,
+ 'import-one': self.handle_import_one,
+ 'export': self.handle_export,
+ 'is-readonly': self.handle_is_readonly,
+ })
+ self.table = table
+ self.read_only = read_only
-class PRServer(SimpleXMLRPCServer):
- def __init__(self, dbfile, logfile, interface):
- ''' constructor '''
+ def validate_proto_version(self):
+ return (self.proto_version == (1, 0))
+
+ async def dispatch_message(self, msg):
try:
- SimpleXMLRPCServer.__init__(self, interface,
- logRequests=False, allow_none=True)
- except socket.error:
- ip=socket.gethostbyname(interface[0])
- port=interface[1]
- msg="PR Server unable to bind to %s:%s\n" % (ip, port)
- sys.stderr.write(msg)
- raise PRServiceConfigError
-
- self.dbfile=dbfile
- self.logfile=logfile
- self.host, self.port = self.socket.getsockname()
-
- self.register_function(self.getPR, "getPR")
- self.register_function(self.ping, "ping")
- self.register_function(self.export, "export")
- self.register_function(self.importone, "importone")
- self.register_introspection_functions()
-
- self.iter_count = 0
- # 60 iterations between syncs or sync if dirty every ~30 seconds
- self.iterations_between_sync = 60
-
- def sigint_handler(self, signum, stack):
- if self.table:
- self.table.sync()
-
- def sigterm_handler(self, signum, stack):
- if self.table:
- self.table.sync()
- raise(SystemExit)
-
- def process_request(self, request, client_address):
- if request is None:
- return
- try:
- self.finish_request(request, client_address)
- self.shutdown_request(request)
- self.iter_count = (self.iter_count + 1) % self.iterations_between_sync
- if self.iter_count == 0:
- self.table.sync_if_dirty()
+ await super().dispatch_message(msg)
except:
- self.handle_error(request, client_address)
- self.shutdown_request(request)
self.table.sync()
+ raise
+
self.table.sync_if_dirty()
- def serve_forever(self, poll_interval=0.5):
- signal.signal(signal.SIGINT, self.sigint_handler)
- signal.signal(signal.SIGTERM, self.sigterm_handler)
+ async def handle_get_pr(self, request):
+ version = request['version']
+ pkgarch = request['pkgarch']
+ checksum = request['checksum']
- self.db = prserv.db.PRData(self.dbfile)
- self.table = self.db["PRMAIN"]
- return super().serve_forever(poll_interval)
-
- def export(self, version=None, pkgarch=None, checksum=None, colinfo=True):
+ response = None
try:
- return self.table.export(version, pkgarch, checksum, colinfo)
- except sqlite3.Error as exc:
- logger.error(str(exc))
- return None
-
- def importone(self, version, pkgarch, checksum, value):
- return self.table.importone(version, pkgarch, checksum, value)
-
- def ping(self):
- return True
-
- def getinfo(self):
- return (self.host, self.port)
-
- def getPR(self, version, pkgarch, checksum):
- try:
- return self.table.getValue(version, pkgarch, checksum)
+ value = self.table.getValue(version, pkgarch, checksum)
+ response = {'value': value}
except prserv.NotFoundError:
logger.error("can not find value for (%s, %s)",version, checksum)
- return None
except sqlite3.Error as exc:
logger.error(str(exc))
- return None
+
+ self.write_message(response)
+
+ async def handle_import_one(self, request):
+ response = None
+ if not self.read_only:
+ version = request['version']
+ pkgarch = request['pkgarch']
+ checksum = request['checksum']
+ value = request['value']
+
+ value = self.table.importone(version, pkgarch, checksum, value)
+ if value is not None:
+ response = {'value': value}
+
+ self.write_message(response)
+
+ async def handle_export(self, request):
+ version = request['version']
+ pkgarch = request['pkgarch']
+ checksum = request['checksum']
+ colinfo = request['colinfo']
+
+ try:
+ (metainfo, datainfo) = self.table.export(version, pkgarch, checksum, colinfo)
+ except sqlite3.Error as exc:
+ logger.error(str(exc))
+ metainfo = datainfo = None
+
+ response = {'metainfo': metainfo, 'datainfo': datainfo}
+ self.write_message(response)
+
+ async def handle_is_readonly(self, request):
+ response = {'readonly': self.read_only}
+ self.write_message(response)
+
+class PRServer(bb.asyncrpc.AsyncServer):
+ def __init__(self, dbfile, read_only=False):
+ super().__init__(logger)
+ self.dbfile = dbfile
+ self.table = None
+ self.read_only = read_only
+
+ def accept_client(self, reader, writer):
+ return PRServerClient(reader, writer, self.table, self.read_only)
+
+ def _serve_forever(self):
+ self.db = prserv.db.PRData(self.dbfile, read_only=self.read_only)
+ self.table = self.db["PRMAIN"]
+
+ logger.info("Started PRServer with DBfile: %s, Address: %s, PID: %s" %
+ (self.dbfile, self.address, str(os.getpid())))
+
+ super()._serve_forever()
+
+ self.table.sync_if_dirty()
+ self.db.disconnect()
+
+ def signal_handler(self):
+ super().signal_handler()
+ if self.table:
+ self.table.sync()
class PRServSingleton(object):
- def __init__(self, dbfile, logfile, interface):
+ def __init__(self, dbfile, logfile, host, port):
self.dbfile = dbfile
self.logfile = logfile
- self.interface = interface
- self.host = None
- self.port = None
-
- def start(self):
- self.prserv = PRServer(self.dbfile, self.logfile, self.interface)
- self.process = multiprocessing.Process(target=self.prserv.serve_forever)
- self.process.start()
-
- self.host, self.port = self.prserv.getinfo()
-
- def getinfo(self):
- return (self.host, self.port)
-
-class PRServerConnection(object):
- def __init__(self, host, port):
- if is_local_special(host, port):
- host, port = singleton.getinfo()
self.host = host
self.port = port
- self.connection, self.transport = bb.server.xmlrpcclient._create_server(self.host, self.port)
- def getPR(self, version, pkgarch, checksum):
- return self.connection.getPR(version, pkgarch, checksum)
+ def start(self):
+ self.prserv = PRServer(self.dbfile)
+ self.prserv.start_tcp_server(socket.gethostbyname(self.host), self.port)
+ self.process = self.prserv.serve_as_process()
- def ping(self):
- return self.connection.ping()
-
- def export(self,version=None, pkgarch=None, checksum=None, colinfo=True):
- return self.connection.export(version, pkgarch, checksum, colinfo)
-
- def importone(self, version, pkgarch, checksum, value):
- return self.connection.importone(version, pkgarch, checksum, value)
-
- def getinfo(self):
- return self.host, self.port
+ if not self.prserv.address:
+ raise PRServiceConfigError
+ if not self.port:
+ self.port = int(self.prserv.address.rsplit(':', 1)[1])
def run_as_daemon(func, pidfile, logfile):
"""
@@ -226,7 +204,7 @@
os.remove(pidfile)
os._exit(0)
-def start_daemon(dbfile, host, port, logfile):
+def start_daemon(dbfile, host, port, logfile, read_only=False):
ip = socket.gethostbyname(host)
pidfile = PIDPREFIX % (ip, port)
try:
@@ -240,15 +218,13 @@
% pidfile)
return 1
- server = PRServer(os.path.abspath(dbfile), os.path.abspath(logfile), (ip,port))
- run_as_daemon(server.serve_forever, pidfile, os.path.abspath(logfile))
+ dbfile = os.path.abspath(dbfile)
+ def daemon_main():
+ server = PRServer(dbfile, read_only=read_only)
+ server.start_tcp_server(ip, port)
+ server.serve_forever()
- # Sometimes, the port (i.e. localhost:0) indicated by the user does not match with
- # the one the server actually is listening, so at least warn the user about it
- _,rport = server.getinfo()
- if port != rport:
- sys.stdout.write("Server is listening at port %s instead of %s\n"
- % (rport,port))
+ run_as_daemon(daemon_main, pidfile, os.path.abspath(logfile))
return 0
def stop_daemon(host, port):
@@ -302,7 +278,7 @@
return True
def is_local_special(host, port):
- if host.strip().upper() == 'localhost'.upper() and (not port):
+ if (host == 'localhost' or host == '127.0.0.1') and not port:
return True
else:
return False
@@ -326,7 +302,9 @@
'Usage: PRSERV_HOST = "<hostname>:<port>"']))
raise PRServiceConfigError
- if is_local_special(host_params[0], int(host_params[1])):
+ host = host_params[0].strip().lower()
+ port = int(host_params[1])
+ if is_local_special(host, port):
import bb.utils
cachedir = (d.getVar("PERSISTENT_DIR") or d.getVar("CACHE"))
if not cachedir:
@@ -340,20 +318,16 @@
auto_shutdown()
if not singleton:
bb.utils.mkdirhier(cachedir)
- singleton = PRServSingleton(os.path.abspath(dbfile), os.path.abspath(logfile), ("localhost",0))
+ singleton = PRServSingleton(os.path.abspath(dbfile), os.path.abspath(logfile), host, port)
singleton.start()
if singleton:
- host, port = singleton.getinfo()
- else:
- host = host_params[0]
- port = int(host_params[1])
+ host = singleton.host
+ port = singleton.port
try:
- connection = PRServerConnection(host,port)
- connection.ping()
- realhost, realport = connection.getinfo()
- return str(realhost) + ":" + str(realport)
-
+ ping(host, port)
+ return str(host) + ":" + str(port)
+
except Exception:
logger.critical("PRservice %s:%d not available" % (host, port))
raise PRServiceConfigError
@@ -366,8 +340,21 @@
singleton = None
def ping(host, port):
- conn=PRServerConnection(host, port)
+ from . import client
+
+ conn = client.PRClient()
+ conn.connect_tcp(host, port)
return conn.ping()
def connect(host, port):
- return PRServerConnection(host, port)
+ from . import client
+
+ global singleton
+
+ if host.strip().lower() == 'localhost' and not port:
+ host = 'localhost'
+ port = singleton.port
+
+ conn = client.PRClient()
+ conn.connect_tcp(host, port)
+ return conn