meta-parsec layer

This layer contains recipes for the Parsec service and parsec tools.

Dependencies

This layer depends on:

URI: git://git.openembedded.org/meta-openembedded
branch: master

URI git://git.yoctoproject.org/meta-security
branch: master

URI https://github.com/kraj/meta-clang.git
branch: master

Adding the meta-parsec layer to your build

In order to use this layer, you need to make the build system aware of it.

You can add it to the build system by adding the location of the meta-parsec layer to bblayers.conf, along with any other layers needed. e.g.:

BBLAYERS ?= " \
  /path/to/yocto/meta \
  /path/to/yocto/meta-yocto \
  /path/to/yocto/meta-yocto-bsp \
  /path/to/meta-openembedded/meta-oe \
  /path/to/meta-openembedded/meta-python \
  /path/to/meta-clang \
  /path/to/meta-security/meta-tpm \
  /path/to/meta-security/meta-parsec \
  "

To include the Parsec service into your image add following into the local.conf:

IMAGE_INSTALL:append = " parsec-service"

By default the Parsec service will be deployed into the image with TPM, PKCS11, MBED-CRYPTO and CRYPTOAUTHLIB providers build in and with the default config file from the Parsec repository: https://github.com/parallaxsecond/parsec/blob/main/config.toml

You can use PACKAGECONFIG for Parsec servic recipe to define what providers should be built in. For example,

PACKAGECONFIG:pn-parsec-service = "TPM"

The default Parsec service config file contains the MbedCrypto provider enabled. The config file needs to be updated to use the Parsec service with other providers like TPM or PKCS11. The required procedures are covered in Parsec documentation. https://parallaxsecond.github.io/parsec-book/

Updating recipes

The parsec-service and parsec-tool recipes use include files with lists of all rust crates required. This allows bitbake to fetch all the necessary dependent crates, as well as a pegged version of the crates.io index, to ensure maximum reproducibility. It's recommended to use cargo-bitbake to generate include files for new versions of parsec recipes. https://github.com/meta-rust/cargo-bitbake

When you have crago-bitbake built:

1. Checkout the required version of parsec repository.
2. Run cargo-bitbake inside the repository. It will produce a BB file.
3. Create a new include file with SRC_URI and LIC_FILES_CHKSUM from the BB file.

Manual testing with runqemu

This layer also contains a recipe for pasec-tool which can be used for manual testing of the Parsec service:

IMAGE_INSTALL:append = " parsec-tool"

There are a series of Parsec Demo videos showing how to use parsec-tool to test the Parsec service base functionality: https://www.youtube.com/watch?v=ido0CyUdMHM&list=PLKjl7IFAwc4S7WQqqphCsyy6DPDxJ2Skg&index=4

The parsec-tool recipe also includes parsec-cli-tests.sh script which runs e2e tests against all providers enabled and configured in Parsec service.

You can use runqemu to start a VM with a built image file and run manual tests with parsec-tool.

Enabling Parsec providers for manual testing

1. MbedCrypto provider The default Parsec service config file contains the MbedCrypto provider enabled. No changes required.

2. PKCS11 provider The Software HSM can be used for manual testing of the provider by including it into your test image:

   IMAGE_INSTALL:append = " softhsm"

Inside the running VM:

• Stop Parsec

systemctl stop parsec

• Initialise a token and notice the result slot number

softhsm2-util --init-token --slot 0 --label "Parsec Service" --pin 123456 --so-pin 123456

• Change the token ownership:

for d in /var/lib/softhsm/tokens/*; do chown -R parsec $d; done

• Enable the PKCS11 provider and update its parameters in the Parsec config file /etc/parsec/config.toml

library_path = "/usr/lib/softhsm/libsofthsm2.so"
slot_number = <slot number>
user_pin = "123456"

• Start Parsec

systemctl start parsec

3. TPM provider The IBM Software TPM service can be used for manual testing of the provider by including it into your test image:

   IMAGE_INSTALL:append = " ibmswtpm2 tpm2-tools libtss2 libtss2-tcti-mssim"

Inside the running VM:

• Stop Parsec

systemctl stop parsec

• Start and configure the Software TPM server

   /usr/bin/tpm_server &
   sleep 5
   /usr/bin/tpm2_startup -c -T mssim
   /usr/bin/tpm2_changeauth -c owner tpm_pass

• Enable the TPM provider and update its parameters in the Parsec config file /etc/parsec/config.toml

tcti = "mssim"
owner_hierarchy_auth = "hex:74706d5f70617373"

• Start Parsec

systemctl start parsec

Maintenance

Send pull requests, patches, comments or questions to yocto@yoctoproject.org

When sending single patches, please using something like: 'git send-email -1 --to yocto@lists.yoctoproject.org --subject-prefix=meta-parsec][PATCH'

These values can be set as defaults for this repository:

$ git config sendemail.to yocto@lists.yoctoproject.org $ git config format.subjectPrefix meta-parsec][PATCH

Now you can just do 'git send-email origin/master' to send all local patches.

Maintainers: Anton Antonov Anton.Antonov@arm.com Armin Kuster akuster808@gmail.com

License

All metadata is MIT licensed unless otherwise stated. Source code included in tree for individual recipes is under the LICENSE stated in each recipe (.bb file) unless otherwise stated.