subtree updates
meta-security: 93f2146211..7628a3e90b:
Anton Antonov (3):
Parsec-service: Update installation procedure
Parsec-service: Fix arm32 build
meta-parsec: Update Parsec runtime tests
Armin Kuster (20):
fscrypt: add distro_check on pam
meta-security: move perl and python recipes to dynamic layers structure
packagegroup-core-security: remove pkgs
packagegroup-core-security: add perl pkgs grps
packagegroup-core-security: add dynamic python pkgs
arpwatch: add postfix to pkg config
suricata: drop nfnetlink from pkg config
packagegroup-core-security.bb: fix suricata inclusion
layer.conf: fix up layer dependancies.
ima-evm-utils: Update to 1.4
aide: Update 01.17.4
ossec-hids: update to 3.7.0
suricata: update to 5.0.5
samhain: update to 4.4.9
tpm2-pkcs11: tpm2-pkcs11 module missing
tpm2-tools: Add missing rdepends
oeqa/cases/tpm2: fix and enhance test suite
meta-parsec: Add pkg grps
meta-parsec: add build image.
oeqa: add parsec runtime tests
Jeremy A. Puhlman (2):
aide: Add depend on audit when audit is enabled.
lib-perl: prefix man pages to avoid conflicting with base perl
Josh Harley (1):
Add EROFS support to dm-verity-img class
Lei Maohui (1):
layer.conf: Added BBFILES_DYNAMIC for dynamic-layers.
meta-openembedded: 77c2fda04e..a9e6d16e66:
Alejandro Enedino Hernandez Samaniego (1):
cryptsetup: Add luks2 configure options defaults
Alex Kiernan (2):
ulogd2: Add recipe
libcoap: Add recipe
Armin Kuster (13):
meta-python-image: Fix build depends
crda: move to a dynamic-layer for python
cyrus-sasl: move from meta-networking to meta-oe
netplan: move from meta-networking to meta-oe
nvmetcli: move recipe to meta-oe
packagegroup-meta-oe: update pkg group
python3-ldap: move to meta-python
packagegroup-meta-python.bb: update pkg group
firewalld: move to dynamic meta-python layer
packagegroup-meta-networking: update pkg group
meta-networking: drop meta-python layer depends
meta-gnome: fix layer depends.
layer.conf: Post release codename changes
Bartosz Golaszewski (19):
python3-pyfanotify: new package
python3-toolz: new package
python3-cytoolz: new package
python3-decouple: new package
python3-eth-hash: new package
python3-eth-typing: new package
python3-eth-utils: new package
python3-eth-keys: new package
python3-eth-keyfile: new package
python3-hexbytes: new package
python3-rlp: new package
python3-eth-rlp: new package
python3-parsimonious: new package
python3-eth-abi: new package
python3-eth-account: new package
python3-lru-dict: new package
python3-web3: new package
python3-inotify: new package
speedtest-cli: drop the recipe
Changqing Li (1):
zabbix: upgrade 5.2.6 -> 6.0.4
Chase Qi (1):
kernel-selftest: install kselftest runner
Claudius Heine (1):
btrfsmaintenance: add recipe for btrfsmaintenance scripts
Denys Dmytriyenko (2):
devmem2: reinstate previous patches, removed by mistake
devmem2: add support for different page sizes
Diego Sueiro (1):
bats: upgrade 1.6.0 -> 1.6.1
Gianfranco (3):
sdbus-c++-libsystemd: Bump SRCREV to last commit of 250-stable branch
sdbus-c++: Bump version from 1.00 to 1.1.0
libmtp: Add doxygen-native dependency in case documentation build is enabled in PACKAGECONFIG. This fixes a FTBFS due to missing dependency.
Gianfranco Costamagna (1):
vboxguestdrivers: upgrade 6.1.32 -> 6.1.34
Jiaqing Zhao (2):
openldap: Remove libgcrypt dependency
openldap: Upgrade 2.5.9 -> 2.5.12
Joerg Vehlow (1):
jq: Fix typo OE_EXTRACONF -> EXTRA_OECONF
Julien STEPHAN (1):
libcamera: fix packaging
Kai Kang (3):
conntrack-tools: fix postinst script
wxwidgets: enable to use private fonts
python3-wxgtk4: backport patch to fix svg issue
Khem Raj (12):
ufw: Fix packaging errors found with ppc64
libcereal: Enable for glibc/ppc
mimic: Use special rateconv.c license
makedumpfile: Use right TARGET for ppc32
evince: Add dbus to depnedencies on non-x11 builds
evolution-data-server: Do not pass --library-path to gir compiler
python3-wxgtk4: Needs x11 for sip module
zfs: Fix build on musl systems
zfs: Disable on riscv32
zfs: Disable on mips
zfs: Make systemd and sysvinit into packageconfigs
sdbus-c++: Link with libatomic on mips/ppc32
Markus Volk (1):
minidlna: fix obsolete license warning
Martin Jansa (1):
ostree: prevent ostree-native depending on target virtual/kernel to provide kernel-module-overlay
Michael Opdenacker (1):
devmem2: update SRC_URI according to redirect
Mingli Yu (1):
s-nail: Set VAL_MTA
Nicolas Dechesne (1):
imlib2: update SRC_URI
Peter Kjellerstedt (1):
libwebsockets: Avoid absolute paths in *.cmake files in the sysroot
Portia (1):
cpulimit: introduce support for this package
Randy MacLeod (1):
intel-speed-select: Add libnl dependency and extend CFLAGS
Richard Neill (1):
bats: Add patch to fix false-negatives caused by teardown code
Ross Burton (1):
Revert "python3-cbor2: upgrade 5.4.2 -> 5.4.3"
Samuli Piippo (1):
python3-qface: upgrade 2.0.7 -> 2.0.8
Teresa Remmet (1):
meta-networking: Add meta-python to BBFILES_DYNAMIC
Vyacheslav Yurkov (1):
polkit: add udisks2 rule
Windel Bouwman (1):
Add zfs recipe
Xu Huan (17):
python3-astroid: upgrade 2.11.2 -> 2.11.3
python3-bitstruct: upgrade 8.14.0 -> 8.14.1
python3-cachecontrol: upgrade 0.12.10 -> 0.12.11
python3-engineio: upgrade 4.3.1 -> 4.3.2
python3-flask-socketio: upgrade 5.1.1 -> 5.1.2
python3-google-api-python-client: upgrade 2.43.0 -> 2.45.0
python3-graphviz: upgrade 0.19.2 -> 0.20
python3-cbor2: upgrade 5.4.2 -> 5.4.3
python3-click: upgrade 8.1.2 -> 8.1.3
python3-flask-login: upgrade 0.6.0 -> 0.6.1
python3-flask: upgrade 2.1.1 -> 2.1.2
python3-google-api-core: upgrade 2.7.1 -> 2.7.3
python3-google-auth: upgrade 2.6.3 -> 2.6.6
python3-mypy: upgrade 0.942 -> 0.950
python3-pyalsaaudio: upgrade 0.9.0 -> 0.9.2
python3-grpcio-tools: upgrade 1.45.0 -> 1.46.0
python3-pychromecast: upgrade 11.0.0 -> 12.1.1
Yi Zhao (1):
networkmanager: fix parallel build failure
wangmy (41):
python3-sentry-sdk: upgrade 1.5.8 -> 1.5.10
python3-socketio: upgrade 5.5.2 -> 5.6.0
python3-textparser: upgrade 0.23.0 -> 0.24.0
python3-twisted: upgrade 22.2.0 -> 22.4.0
python3-websockets: upgrade 10.2 -> 10.3
fuse3: upgrade 3.10.5 -> 3.11.0
zenity: upgrade 3.42.0 -> 3.42.1
babeld: upgrade 1.11 -> 1.12
cifs-utils: upgrade 6.14 -> 6.15
nbdkit: upgrade 1.31.1 -> 1.31.2
stunnel: upgrade 5.63 -> 5.64
tgt: upgrade 1.0.79 -> 1.0.82
wolfssl: upgrade 5.2.0 -> 5.3.0
ctags: upgrade 5.9.20220417.0 -> 5.9.20220501.0
freerdp: upgrade 2.6.1 -> 2.7.0
fwupd-efi: upgrade 1.2 -> 1.3
htop: upgrade 3.1.2 -> 3.2.0
hwdata: upgrade 0.358 -> 0.359
icewm: upgrade 2.9.6 -> 2.9.7
iwd: upgrade 1.26 -> 1.27
jemalloc: upgrade 5.2.1 -> 5.3.0
libmbim: upgrade 1.26.2 -> 1.26.4
libyang: upgrade 2.0.164 -> 2.0.194
nano: upgrade 6.2 -> 6.3
phoronix-test-suite: upgrade 10.8.2 -> 10.8.3
php: upgrade 8.1.4 -> 8.1.5
pkcs11-helper: upgrade 1.28.0 -> 1.29.0
poppler: upgrade 22.04.0 -> 22.05.0
toybox: upgrade 0.8.6 -> 0.8.7
unixodbc: upgrade 2.3.9 -> 2.3.11
xmlsec1: upgrade 1.2.33 -> 1.2.34
gtk4: upgrade 4.6.3 -> 4.6.4
nbdkit: upgrade 1.31.2 -> 1.31.5
ctags: upgrade 5.9.20220501.0 -> 5.9.20220508.0
openjpeg: upgrade 2.4.0 -> 2.5.0
php: upgrade 8.1.5 -> 8.1.6
postgresql: upgrade 14.2 -> 14.3
phpmyadmin: upgrade 5.1.3 -> 5.2.0
python3-aiohue: upgrade 3.0.11 -> 4.4.1
python3-awesomeversion : add recipe
python3-traitlets: upgrade 5.1.1 -> 5.2.0
zhengrq.fnst (12):
glibmm-2.68: upgrade 2.70.0 -> 2.72.1
gnome-text-editor: upgrade 42.0 -> 42.1
apitrace: upgrade 10.0 -> 11.0
libconfig-general-perl: upgrade 2.63 -> 2.65
gpsd: upgrade 3.23.1 -> 3.24
mbw: upgrade 1.4 -> 1.5
gtk4: upgrade 4.6.2 -> 4.6.3
python3-antlr4-runtime: upgrade 4.9.2 -> 4.10
python3-booleanpy: upgrade 3.8 -> 4.0
python3-pika: upgrade 1.2.0 -> 1.2.1
python3-autobahn: upgrade 22.3.2 -> 22.4.2
python3-bitarray: upgrade 2.4.1 -> 2.5.0
zhengruoqin (7):
python3-imageio: upgrade 2.17.0 -> 2.18.0
python3-langtable: upgrade 0.0.57 -> 0.0.58
python3-paramiko: upgrade 2.10.3 -> 2.10.4
python3-protobuf: upgrade 3.20.0 -> 3.20.1
python3-pylint: upgrade 2.13.5 -> 2.13.7
python3-pymongo: upgrade 4.1.0 -> 4.1.1
python3-regex: upgrade 2022.3.15 -> 2022.4.24
poky: 9e55696042..13d70e57f8:
Alex Kiernan (7):
eudev: Upgrade 3.2.10 -> 3.2.11
eudev: Add PACKAGECONFIG for manpages & selinux
pypi.bbclass: Set CVE_PRODUCT to PYPI_PACKAGE
openssh: Add openssh-sftp-server to openssh RDEPENDS
eudev: Convert dependencies to PACKAGECONFIG
eudev: Cleanup redundant configuration
eudev: Use PACKAGE_BEFORE_PN/${PN}, clean up spaces
Alexander Kanavin (106):
systemd: upgrade 250.4 -> 250.5
python3-cryptography: upgrade 36.0.2 -> 37.0.1
util-linux: upgrade 2.37.4 -> 2.38
vulkan: upgrade 1.3.204.1 -> 1.3.211.0
libnl: upgrade 3.5.0 -> 3.6.0
libsdl2: upgrade 2.0.20 -> 2.0.22
mesa: upgrade 22.0.0 -> 22.0.2
python3-babel: upgrade 2.9.1 -> 2.10.1
python3-mako: upgrade 1.1.6 -> 1.2.0
python3-pygments: upgrade 2.11.2 -> 2.12.0
at-spi2-core: upgrade 2.44.0 -> 2.44.1
bind: upgrade 9.18.1 -> 9.18.2
cronie: upgrade 1.6.0 -> 1.6.1
diffoscope: upgrade 208 -> 211
dnf: upgrade 4.11.1 -> 4.12.0
ell: upgrade 0.49 -> 0.50
epiphany: upgrade 42.0 -> 42.2
ffmpeg: upgrade 5.0 -> 5.0.1
fribidi: upgrade 1.0.11 -> 1.0.12
harfbuzz: upgrade 4.2.0 -> 4.2.1
libinput: upgrade 1.19.3 -> 1.19.4
libmnl: upgrade 1.0.4 -> 1.0.5
libnotify: upgrade 0.7.9 -> 0.7.11
libpipeline: upgrade 1.5.5 -> 1.5.6
libseccomp: upgrade 2.5.3 -> 2.5.4
libx11: upgrade 1.7.5 -> 1.8
lttng-tools: upgrade 2.13.4 -> 2.13.7
mmc-utils: upgrade to latest revision
neard: upgrade 0.16 -> 0.18
pango: upgrade 1.50.6 -> 1.50.7
parted: upgrade 3.4 -> 3.5
piglit: upgrade to latest revision
python3-cryptography-vectors: upgrade 36.0.2 -> 37.0.1
python3-dtschema: upgrade 2022.1 -> 2022.4
python3-hypothesis: upgrade 6.44.0 -> 6.46.0
python3-jinja2: upgrade 3.1.1 -> 3.1.2
python3-pygobject: upgrade 3.42.0 -> 3.42.1
python3-pytest: upgrade 7.1.1 -> 7.1.2
repo: upgrade 2.23 -> 2.24.1
sqlite3: upgrade 3.38.2 -> 3.38.3
vala: upgrade 0.56.0 -> 0.56.1
vte: upgrade 0.66.2 -> 0.68.0
webkitgtk: upgrade 2.36.0 -> 2.36.1
xorgproto: upgrade 2021.5 -> 2022.1
xwayland: upgrade 22.1.0 -> 22.1.1
sysvinit: update 3.02 -> 3.04
pciutils: update 3.7.0 -> 3.8.0
elfutils: update 0.186 -> 0.187
git: update 2.35.3 -> 2.36.0
libdnf: update 0.66.0 -> 0.67.0
llvm: update 14.0.1 -> 14.0.3
rsync: update 3.2.3 -> 3.2.4
lsof: update 4.94.0 -> 4.95.0
libhandy: update 1.5.0 -> 1.6.2
librsvg: update 2.54.0 -> 2.54.1
xauth: update 1.1.1 -> 1.1.2
gnupg: update 2.3.4 -> 2.3.6
qemu: update 6.2.0 -> 7.0.0
stress-ng: disable apparmor from the correct spot
coreutils: update 9.0 -> 9.1
python3-setuptools: upgrade 59.5.0 -> 62.3.1
go: upgrade 1.18.1 -> 1.18.2
iptables: upgrade 1.8.7 -> 1.8.8
gnu-config: update to latest version
u-boot: upgrade 2022.01 -> 2022.04
python3-pip: update 22.0.4 -> 22.1
libxcb: update 1.14 -> 1.15
xcb-proto: upgrade 1.14.1 -> 1.15
systemtap: update 4.6 -> 4.7
vulkan-samples: update to latest revision
curl: upgrade 7.83.0 -> 7.83.1
diffoscope: upgrade 211 -> 212
git: upgrade 2.36.0 -> 2.36.1
gnutls: upgrade 3.7.4 -> 3.7.5
gst-devtools: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-libav: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-omx: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-plugins-bad: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-plugins-base: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-plugins-good: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-plugins-ugly: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-python: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-rtsp-server: upgrade 1.20.1 -> 1.20.2
gstreamer1.0: upgrade 1.20.1 -> 1.20.2
gstreamer1.0-vaapi: upgrade 1.20.1 -> 1.20.2
libcgroup: upgrade 2.0.1 -> 2.0.2
libnotify: upgrade 0.7.11 -> 0.7.12
librsvg: upgrade 2.54.1 -> 2.54.3
mesa: upgrade 22.0.2 -> 22.0.3
mobile-broadband-provider-info: upgrade 20220315 -> 20220511
piglit: upgrade to latest revision
psmisc: upgrade 23.4 -> 23.5
python3-bcrypt: upgrade 3.2.0 -> 3.2.2
python3-cryptography: upgrade 37.0.1 -> 37.0.2
python3-cryptography-vectors: upgrade 37.0.1 -> 37.0.2
python3-hypothesis: upgrade 6.46.0 -> 6.46.4
python3-jsonschema: upgrade 4.4.0 -> 4.5.1
python3-markdown: upgrade 3.3.6 -> 3.3.7
python3-more-itertools: upgrade 8.12.0 -> 8.13.0
python3-pbr: upgrade 5.8.1 -> 5.9.0
python3-pyparsing: upgrade 3.0.8 -> 3.0.9
repo: upgrade 2.24.1 -> 2.25
sqlite3: upgrade 3.38.3 -> 3.38.5
stress-ng: upgrade 0.14.00 -> 0.14.01
python3-setuptools-rust: update 1.1.2 -> 1.3.0
python3: use built-in distutils for ptest, rather than setuptools' 'fork'
Andrej Valek (1):
kernel: add missing path to search for debug files
Arkadiusz Drabczyk (1):
overview-manual: fix a forgotten link
Aryaman Gupta (1):
e2fsprogs: update upstream status
Bruce Ashfield (23):
linux-yocto/5.15: arm: poky-tiny cleanup and fixes
linux-yocto/5.10: update to v5.10.110
linux-yocto/5.10: base: enable kernel crypto userspace API
linux-yocto/5.15: update to v5.15.33
linux-yocto/5.15: base: enable kernel crypto userspace API
linux-yocto/5.15: kasan: fix BUG: sleeping function called from invalid context
linux-yocto/5.15: fix ppc boot
linux-yocto/5.15: netfilter: conntrack: avoid useless indirection during conntrack destruction
linux-yocto/5.10: update to v5.10.112
linux-yocto/5.15: update to v5.15.35
linux-yocto/5.15: Fix CVE-2022-28796
linux-yocto: enable powerpc debug fragment
linux-yocto/5.15: fix -standard kernel build issue
linux-yocto/5.15: update to v5.15.36
linux-yocto/5.15: fix qemuarm graphical boot
strace: fix ptest failure in landlock
yocto-bsps: update to v5.15.36
yocto-bsps: update to v5.10.113
linux-yocto/5.15: update to v5.15.37
linux-yocto/5.10: update to v5.10.113
linux-yocto/5.15: update to v5.15.38
linux-yocto/5.10: update to v5.10.114
lttng-modules: fix build against 5.18-rc7+
Changqing Li (1):
eudev: create static-nodes in init script
Chanho Park (2):
externalsrc.bbclass: support crate fetcher on externalsrc
cargo_common.bbclass: enable bitbake vendoring for externalsrc
Claudius Heine (3):
classes: rootfs-postcommands: add skip option to overlayfs_qa_check
overlayfs: add docs about skipping QA check & service dependencies
wic: added fspassno parameter to partition
Davide Gardenal (4):
cve-check: add JSON format to summary output
cve-check: fix symlinks where link and output path are equal
rootfs-postcommands: fix symlinks where link and output path are equal
openssl: minor security upgrade 3.0.2 -> 3.0.3
Dmitry Baryshkov (3):
linux-firmware: upgrade 20220411 -> 20220509
linux-firmware: package new Qualcomm firmware
image.bbclass: allow overriding dependency on virtual/kernel:do_deploy
Felix Moessbauer (1):
wic/plugins/rootfs: Fix permissions when splitting rootfs folders across partitions
Gunjan Gupta (2):
bitbake: fetch2/osc: Small fixes for osc fetcher
bitbake: fetch2/osc: Add support to query latest revision
Jacob Kroon (1):
Revert "image.bbclass: allow overriding dependency on virtual/kernel:do_deploy"
Jiaqing Zhao (5):
libxml2: Upgrade 2.9.13 -> 2.9.14
systemd: Drop 0001-test-parse-argument-Include-signal.h.patch
systemd: Remove __compare_fn_t type in musl-specific patch
systemd: Drop 0002-don-t-use-glibc-specific-qsort_r.patch
systemd: Correct path returned in sd_path_lookup()
Jon Mason (1):
qemuarmv5: use arm-versatile-926ejs KMACHINE
Kai Kang (1):
wpa-supplicant: update config for gnutls
Khem Raj (15):
qemu: Add packageconfig for libbpf support
linux-yocto: Enable powerpc-debug fragment for ppc64 LE
musl: Upgrade to tip of trunk
systemd: Fix build regression with latest update
gcc: upgrade 11.3 -> 12.1
libstd-rs: Forward port rust libc patches
gdb: Upgrade to 12.1
bash: build with bash_cv_getcwd_malloc=yes on musl too
ovmf: Fix native build with gcc-12
elfutils: Disable stringop-overflow warning for build host
musl-locales: Switch SRC_URI to new location
systemd: Drop redundant musl patches
systemd: Document future actions needed for set of musl patches
systemd: Drop 0016-Hide-__start_BUS_ERROR_MAP-and-__stop_BUS_ERROR_MAP.patch
systemd: Update patch status
Konrad Weihmann (1):
linux-firmware: replace mkdir by install
Kory Maincent (1):
images_types: isolate the write of UBI configuration
Leon Anavi (1):
image_types/runqemu-addptable2image: Fix a minor typo
Markus Volk (2):
mesa.inc: package 00-radv-defaults.conf
libsdl2: add PACKAGECONFIG for libusb1 and remove obsolete options
Marta Rybczynska (3):
cve-update-db-native: update the CVE database once a day only
cve-update-db-native: let the user to drive the update interval
cve-check: Fix report generation
Martin Jansa (1):
bitbake: osc: fix DeprecationWarning
Michael Halstead (5):
releases: update to include 3.1.16
scripts/autobuilder-worker-prereq-tests: update to use yocto 4.0
scripts/autobuilder-worker-prereq-tests: add additional limit testing
releases: update to include 3.4.4
releases: include 4.0.1
Michael Opdenacker (12):
MAINTAINERS.md: no more need for a prelink-cross maintainer
dev-manual: further gdb usage simplifications
doc/Makefile: fix epub and latexpdf targets
manuals: fix name capitalization issues
doc: standards for project and file names
manuals: improve the width of diagrams
manuals: improve documentation for TEMPLATECONF
overview-manual: remove confusing and unnecessary paragraph about site.conf
manuals: add quoting to references to bitbake.conf
manuals: add missing space in appends
manuals: add documentation for WKS_FILES
migration guides: release notes for 3.4.3 and 3.4.4
Mingli Yu (1):
python3-cryptography: remove --benchmark-disable option
Peter Kjellerstedt (4):
base-passwd: Regenerate the patches
base-passwd: Update to 3.5.52
base-passwd: Update the status for two patches
librsvg: Drop the dependency on libcroco
Quentin Schulz (2):
docs: set_versions.py: remove hardknott from active releases list
docs: set_versions.py: show release name in switchers.js
Raphael Teller (1):
kernel.bbclass: Do not overwrite recipe's custom postinst
Richard Purdie (25):
bitbake: cookerdata: Change emphasis in error message to be clearer to users
cairo: Add missing GPLv3 license checksum entry
libgcrypt: Drop GPLv3 license after upstream changes
base: Avoid circular references to our own scripts
scripts: Make git intercept global
scripts/git: Ensure we don't have circular references
abi_version/sstate: Bump hashequiv and sstate versions due to git changes
vim: Upgrade 8.2.4681 -> 8.2.4912
package: Ensure we track whether PRSERV was active or not
libgcrypt: Fix reproducibility issues in ptest
liberror-perl: Update sstate/equiv versions to clean cache
freetype: Upgrade 2.12.0 -> 2.12.1
bitbake: fetch/git : Use cat as pager
pciutils: Add make-native dependency
sanity: Don't warn about make 4.2.1 for mint
bitbake: build: Add clean_stamp API function to allow removal of task stamps
staging: Fix rare sysroot corruption issue
selftest/imagefeatures/overlayfs: Always append to DISTRO_FEATURES
udev-extraconf/initrdscripts/parted: Rename mount.blacklist -> mount.ignorelist
layer.conf: Don't use indirect help2man-native dependencies
rust-common: Fix sstate signatures between arm hf and non-hf
rust-common: Drop LLVM_TARGET and simplify
rust-common: Fix native signature dependency issues
scripts/patchreview: Add commit to stored json data
scripts/patchreview: Make json output human parsable
Robert Joslyn (1):
powerpc: Remove invalid GLIBC_EXTRA_OECONF
Roland Hieber (1):
bitbake: cache: correctly handle file names containing colons
Ross Burton (4):
oeqa/selftest: add test for git working correctly inside pseudo
Revert "bitbake.conf: mark all directories as safe for git to read"
kernel-yocto.bbclass: say what SRC_URI entry is being dropped
oeqa/selftest/cve_check: add tests for recipe and image reports
Rouven Czerwinski (1):
kbd: fix pam DISTRO_FEATURES check
Samuli Piippo (1):
binutils: Bump to latest 2.38 release branch
Schmidt, Adriaan (1):
bitbake: bitbake-diffsigs: break on first dependent task difference
Simone Weiss (1):
libgcrypt: Add ptest
Steve Sakoman (2):
virgl: skip headless test on alma 8.6
python3: fix reproducibility issue with python3-core
Sundeep KOKKONDA (3):
dev-manual: improvements for gdbserver configuration
rust-common: Ensure sstate signatures have correct dependencues for do_rust_gen_targets
rust-common: Fix for target definitions returning 'NoneType' for arm
Thomas Epperson (1):
dev-manual: fix documentation for bmaptool usage
Thomas Perrot (1):
man-pages: add an alternative link name for crypt_r.3
Tomasz Dziendzielski (1):
bitbake: data: Do not depend on vardepvalueexclude flag
Trevor Woerner (1):
DISTRO_FEATURES: remove uclibc remnants
Zoltán Böszörményi (2):
npm.bbclass: Fix file permissions before opening it for writing
npm.bbclass: Don't create /usr/lib/node symlink
leimaohui (1):
cve-check.bbclass: Added do_populate_sdk[recrdeptask].
wangmy (1):
librepo: upgrade 1.14.2 -> 1.14.3
meta-raspberrypi: c97a9e34ab..62a84833d9:
Andrei Gherzan (1):
Revert "kmod: Enable xz compression"
Khem Raj (3):
rpi-config: Add option to enable One-wire interface
linux-firmware-rpidistro: Create brcmfmac43455-sdio.raspberrypi,4-model-b.bin symlink
linux-raspberrypi: Upgrade to 5.15.38
Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
Change-Id: If15534d7da5bfa78ef2224bb09ff1a8eb96a0e10
diff --git a/poky/documentation/dev-manual/common-tasks.rst b/poky/documentation/dev-manual/common-tasks.rst
index b228c75..ca6d594 100644
--- a/poky/documentation/dev-manual/common-tasks.rst
+++ b/poky/documentation/dev-manual/common-tasks.rst
@@ -1125,6 +1125,7 @@
.. image:: figures/recipe-workflow.png
:align: center
+ :width: 50%
Locate or Automatically Create a Base Recipe
--------------------------------------------
@@ -3618,7 +3619,7 @@
The following figure and list overviews the build process:
.. image:: figures/bitbake-build-flow.png
- :align: center
+ :width: 100%
1. *Set up Your Host Development System to Support Development Using the
Yocto Project*: See the ":doc:`start`" section for options on how to get a
@@ -3736,6 +3737,7 @@
.. image:: figures/multiconfig_files.png
:align: center
+ :width: 50%
The reason for this required file hierarchy is because the :term:`BBPATH`
variable is not constructed until the layers are parsed.
@@ -4826,7 +4828,7 @@
require conf/multilib.conf
MULTILIBS = "multilib:lib32"
DEFAULTTUNE:virtclass-multilib-lib32 = "x86"
- IMAGE_INSTALL:append = "lib32-glib-2.0"
+ IMAGE_INSTALL:append = " lib32-glib-2.0"
This example enables an additional library named
``lib32`` alongside the normal target packages. When combining these
@@ -5392,7 +5394,7 @@
The ``wic`` command generates partitioned images from existing
OpenEmbedded build artifacts. Image generation is driven by partitioning
-commands contained in an Openembedded kickstart file (``.wks``)
+commands contained in an OpenEmbedded kickstart file (``.wks``)
specified either directly on the command line or as one of a selection
of canned kickstart files as shown with the ``wic list images`` command
in the
@@ -5464,7 +5466,7 @@
- You need to have the build artifacts already available, which
typically means that you must have already created an image using the
- Openembedded build system (e.g. ``core-image-minimal``). While it
+ OpenEmbedded build system (e.g. ``core-image-minimal``). While it
might seem redundant to generate an image in order to create an image
using Wic, the current version of Wic requires the artifacts in the
form generated by the OpenEmbedded build system.
@@ -5479,7 +5481,9 @@
variable.
- Include the name of the :ref:`wic kickstart file <openembedded-kickstart-wks-reference>`
- as part of the :term:`WKS_FILE` variable
+ as part of the :term:`WKS_FILE` variable. If multiple candidate files can
+ be provided by different layers, specify all the possible names through the
+ :term:`WKS_FILES` variable instead.
Getting Help
------------
@@ -5546,7 +5550,7 @@
-----------------
You can use Wic in two different modes, depending on how much control
-you need for specifying the Openembedded build artifacts that are used
+you need for specifying the OpenEmbedded build artifacts that are used
for creating the image: Raw and Cooked:
- *Raw Mode:* You explicitly specify build artifacts through Wic
@@ -5880,7 +5884,7 @@
image, and boot from the media. You can write the image by using
``bmaptool`` or ``dd``::
- $ oe-run-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
+ $ oe-run-native bmap-tools-native bmaptool copy mkefidisk-201804191017-sda.direct /dev/sdX
or ::
@@ -6432,10 +6436,10 @@
new build directory.
The OpenEmbedded build system uses the environment variable
-``TEMPLATECONF`` to locate the directory from which it gathers
+:term:`TEMPLATECONF` to locate the directory from which it gathers
configuration information that ultimately ends up in the
:term:`Build Directory` ``conf`` directory.
-By default, ``TEMPLATECONF`` is set as follows in the ``poky``
+By default, :term:`TEMPLATECONF` is set as follows in the ``poky``
repository::
TEMPLATECONF=${TEMPLATECONF:-meta-poky/conf}
@@ -6450,7 +6454,7 @@
To override these default configuration files with configurations you
want used within every new Build Directory, simply set the
-``TEMPLATECONF`` variable to your directory. The ``TEMPLATECONF``
+:term:`TEMPLATECONF` variable to your directory. The :term:`TEMPLATECONF`
variable is set in the ``.templateconf`` file, which is in the top-level
:term:`Source Directory` folder
(e.g. ``poky``). Edit the ``.templateconf`` so that it can locate your
@@ -6490,7 +6494,7 @@
Changing the listed common targets is as easy as editing your version of
``conf-notes.txt`` in your custom template configuration directory and
-making sure you have ``TEMPLATECONF`` set to your directory.
+making sure you have :term:`TEMPLATECONF` set to your directory.
Conserving Disk Space
=====================
@@ -7691,7 +7695,7 @@
go to ``http://192.168.7.2:3000`` and you see the following:
.. image:: figures/cute-files-npm-example.png
- :align: center
+ :width: 100%
You can find the recipe in ``workspace/recipes/cute-files``. You can use
the recipe in any layer you choose.
@@ -8215,6 +8219,7 @@
.. image:: figures/buildhistory.png
:align: center
+ :width: 50%
At the top level, there is a ``metadata-revs`` file that lists the
revisions of the repositories for the enabled layers when the build was
@@ -8555,7 +8560,7 @@
Here is a sample screenshot of the interface:
.. image:: figures/buildhistory-web.png
- :align: center
+ :width: 100%
Performing Automated Runtime Testing
====================================
@@ -9214,7 +9219,7 @@
to run specific tasks in the build chain. It can be useful to run
tasks "out-of-order" when trying isolate build issues.
-- ":ref:`dev-manual/common-tasks:general bitbake problems`" describes how
+- ":ref:`dev-manual/common-tasks:general BitBake problems`" describes how
to use BitBake's ``-D`` debug output option to reveal more about what
BitBake is doing during the build.
@@ -9409,7 +9414,7 @@
- DOT files use a plain text format. The graphs generated using the
``bitbake -g`` command are often so large as to be difficult to
- read without special pruning (e.g. with Bitbake's ``-I`` option)
+ read without special pruning (e.g. with BitBake's ``-I`` option)
and processing. Despite the form and size of the graphs, the
corresponding ``.dot`` files can still be possible to read and
provide useful information.
@@ -10177,10 +10182,9 @@
2. *Configure the system to include gdbserver in the target filesystem:*
- Make the following addition in either your ``local.conf`` file or in
- an image recipe::
+ Make the following addition in your ``local.conf`` file::
- IMAGE_INSTALL:append = " gdbserver"
+ EXTRA_IMAGE_FEATURES:append = " tools-debug"
The change makes
sure the ``gdbserver`` package is included.
@@ -10227,14 +10231,14 @@
$ mkdir debugfs
$ cd debugfs
- $ tar xvfj build-dir/tmp-glibc/deploy/images/machine/image.rootfs.tar.bz2
- $ tar xvfj build-dir/tmp-glibc/deploy/images/machine/image-dbg.rootfs.tar.bz2
+ $ tar xvfj build-dir/tmp/deploy/images/machine/image.rootfs.tar.bz2
+ $ tar xvfj build-dir/tmp/deploy/images/machine/image-dbg.rootfs.tar.bz2
5. *Set up GDB:*
Install the SDK (if you built one) and then source the correct
environment file. Sourcing the environment file puts the SDK in your
- ``PATH`` environment variable.
+ ``PATH`` environment variable and sets ``$GDB`` to the SDK's debugger.
If you are using the build system, Gdb is located in
`build-dir`\ ``/tmp/sysroots/``\ `host`\ ``/usr/bin/``\ `architecture`\ ``/``\ `architecture`\ ``-gdb``
@@ -10313,24 +10317,20 @@
To support this kind of debugging, you need do the following:
-- Ensure that GDB is on the target. You can do this by adding "gdb" to
- :term:`IMAGE_INSTALL`::
+- Ensure that GDB is on the target. You can do this by making
+ the following addition to your ``local.conf`` file::
- IMAGE_INSTALL:append = " gdb"
+ EXTRA_IMAGE_FEATURES:append = " tools-debug"
- Alternatively, you can add "tools-debug" to :term:`IMAGE_FEATURES`::
+- Ensure that debug symbols are present. You can do so by adding the
+ corresponding ``-dbg`` package to :term:`IMAGE_INSTALL`::
- IMAGE_FEATURES:append = " tools-debug"
+ IMAGE_INSTALL:append = " packagename-dbg"
-- Ensure that debug symbols are present. You can make sure these
- symbols are present by installing ``-dbg``::
-
- IMAGE_INSTALL:append = "packagename-dbg"
-
- Alternatively, you can do the following to include
+ Alternatively, you can add the following to ``local.conf`` to include
all the debug symbols::
- IMAGE_FEATURES:append = " dbg-pkgs"
+ EXTRA_IMAGE_FEATURES:append = " dbg-pkgs"
.. note::
@@ -10565,7 +10565,7 @@
- *poky "master-next" branch:* This branch is part of the
:yocto_git:`poky </poky/>` repository and combines proposed
- changes to bitbake, the core metadata and the poky distro.
+ changes to BitBake, the core metadata and the poky distro.
Similarly, stable branches maintained by the project may have corresponding
``-next`` branches which collect proposed changes. For example,
@@ -11442,7 +11442,7 @@
Please choose one that you want to use and enable the spdx task. You have to
add some config options in ``local.conf`` file in your :term:`Build
Directory`. Here is an example showing how to generate spdx files
- during bitbake using the fossology-python.bbclass::
+ during BitBake using the fossology-python.bbclass::
# Select fossology-python.bbclass.
INHERIT += "fossology-python"