tree 3c92f31bb2dd62b7e7a6d8f8e57a91180fb57339
parent 3cd63893e308805cbd4202383e7f711f655e22cb
author Joel Stanley <joel@jms.id.au> 1562562295 +0930
committer Brad Bishop <bradleyb@fuzziesquirrel.com> 1562811135 -0400

linux-aspeed: Move to v5.2

This updates OpenBMC to the upstream v5.2 release. There are 100 patches
carried in the openbmc tree, 58 of which are staged for inclusion in
5.3.

Adriana Kobylak (2):
      ARM: dts: aspeed: Add Swift BMC machine
      ARM: dts: aspeed: swift: Add pca9539 devices

Alexander Amelkin (1):
      mtd: spi-nor: fix options for mx66l51235f

Alexander Filippov (1):
      ARM: dts: aspeed: Add YADRO VESNIN BMC

Alexander Soldatov (1):
      hwmon (occ): Add temp sensor value check

Andrew Jeffery (16):
      dt-bindings: pinctrl: aspeed: Split bindings document in two
      dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
      dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
      MAINTAINERS: Add entry for ASPEED pinctrl drivers
      pinctrl: aspeed: Correct comment that is no longer true
      pinctrl: aspeed: Clarify comment about strapping W1C
      pinctrl: aspeed: Split out pinmux from general pinctrl
      pinctrl: aspeed: Add implementation-related documentation
      dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
      pmbus (max31785): Add support for devicetree configuration
      pmbus (core): One-shot retries for failure to set page
      pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
      pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
      soc: aspeed: Miscellaneous control interfaces
      ARM: dts: aspeed: witherspoon: Update max31785 node
      ARM: dts: aspeed-g5: Expose VGA and SuperIO scratch registers

Andrew Peng (1):
      ARM: dts: aspeed: Adding Lenovo Hr630 BMC

Benjamin Herrenschmidt (1):
      ARM: dts: aspeed: Add Power9 and Power9 CFAM description

Christopher Bostic (1):
      iio: dps310: Temperature measurement errata

Cédric Le Goater (11):
      mtd: spi-nor: aspeed: use command mode for reads
      mtd: spi-nor: aspeed: add support for SPI dual IO read mode
      mtd: spi-nor: aspeed: link controller with the ahb clock
      mtd: spi-nor: aspeed: optimize read mode
      mtd: spi-nor: aspeed: limit the maximum SPI frequency
      /dev/mem: add a devmem kernel parameter to activate the device
      ARM: dts: aspeed: Add "spi-max-frequency" property
      mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
      mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
      mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
      mtd: spi-nor: aspeed: add support for the 4B opcodes

Eddie James (4):
      ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
      iio: dps310: Add pressure sensing capability
      OCC: FSI and hwmon: Add sequence numbering
      fsi: sbefifo: Don't fail operations when in SBE IPL state

Fran Hsu (4):
      ARM: dts: nuvoton: Add NPCM730 common device tree
      ARM: dts: nuvoton: Add Quanta GSJ BMC pinctrl
      ARM: dts: nuvoton: Add Quanta GSJ BMC Device Tree.
      ARM: dts: nuvoton: Add GPIOs and LEDs to GSJ device tree

George Hung (2):
      dt-binding: edac: add NPCM ECC documentation
      edac: npcm: Add Nuvoton NPCM7xx EDAC driver

Hongwei Zhang (1):
      ARM: dts: aspeed: Add Microsoft Olympus BMC

Jae Hyun Yoo (22):
      media: aspeed: fix a kernel warning on clk control
      media: aspeed: refine clock control logic
      media: aspeed: change irq to threaded irq
      media: aspeed: remove IRQF_SHARED flag
      media: aspeed: reduce noisy log printing outs
      media: aspeed: remove checking of VE_INTERRUPT_CAPTURE_COMPLETE
      media: aspeed: refine interrupt handling logic
      media: aspeed: remove source buffer allocation before mode detection
      media: aspeed: use different delays for triggering VE H/W reset
      media: aspeed: add a workaround to fix a silicon bug
      dt-bindings: Add a document of PECI subsystem
      Documentation: ioctl: Add ioctl numbers for PECI subsystem
      peci: Add support for PECI bus driver core
      dt-bindings: Add a document of PECI adapter driver for ASPEED AST24xx/25xx SoCs
      peci: Add a PECI adapter driver for Aspeed AST24xx/AST25xx
      dt-bindings: mfd: Add a document for PECI client MFD
      mfd: intel-peci-client: Add PECI client MFD driver
      Documentation: hwmon: Add documents for PECI hwmon client drivers
      hwmon: Add PECI cputemp driver
      hwmon: Add PECI dimmtemp driver
      Add maintainers for the PECI subsystem
      ARM: dts: aspeed: peci: Add PECI node

Jeremy Kerr (1):
      fsi/core: Fix error paths on CFAM init

Joel Stanley (5):
      ARM: dts: aspeed: Rename flash-controller nodes
      iio: Add driver for Infineon DPS310
      soc: aspeed: lpc-ctrl: Fix probe error handling
      ARM: dts: aspeed-g4: Expose SuperIO scratch registers
      ARM: config: aspeed: Update defconfigs

John Wang (1):
      ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine

Lei YU (1):
      hwmon (occ): Fix division by zero issue

Maxim Sloyko (1):
      ARM: dts: aspeed: zaius: add Infineon and Intersil regulators

Oliver O'Halloran (1):
      i2c: fsi: Create busses for all ports

Patrick Venture (2):
      ARM: dts: aspeed: Add aspeed-p2a-ctrl node
      ARM: dts: aspeed: quanta-q71: Enable p2a node

Robert Lippert (2):
      ARM: dts: aspeed: zaius: update 12V brick I2C address
      ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots

Tao Ren (2):
      ARM: dts: aspeed: cmm: enable ehci host controllers
      ARM: dts: aspeed: Add Facebook YAMP BMC

Tomer Maimon (15):
      clk: nuvoton: add npcm750 clock function prototype initialization
      dt-binding: mtd: add NPCM FIU controller
      mtd: spi-nor: add NPCM FIU controller driver
      dt-bindings: i2c: npcm7xx: add binding for i2c controller
      i2c: npcm: driver for Poleg i2c controller
      dt-binding: bmc: Add NPCM7xx LPC BPC documentation
      misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
      dt-binding: bmc: add npcm7xx pci mailbox document
      misc: mbox: add npcm7xx pci mailbox driver
      dt-binding: net: document NPCM7xx EMC DT bindings
      net: npcm: add NPCM7xx Ethernet MAC controller
      dt-binding: peci: add NPCM PECI documentation
      peci: npcm: add NPCM PECI driver
      ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
      ARM: dts: npcm7xx: Update device tree

Vijay Khemka (1):
      soc: aspeed: lpc-ctrl: make parameter optional

(From meta-aspeed rev: a83505d583b46be0523db03bf5bfdff2a5f6df9f)

Change-Id: I0b5ee194f658657230ab1bf880990157f15dde09
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Brad Bishop <bradleyb@fuzziesquirrel.com>