meta-facebook: yosemite4: set default PWM to 100 persent
Description:
According to the thermal baseline test results of T1M config with
Floating Falls config at 35C, 6000ft, the minimum fan duty will
locate at 95%.
Set the system fan duty as constant at 100% for all EVT build to
prevent the thermal risk.
Test Case:
1. Check all the PWMs are 100%. - pass
Change-Id: I561745865f3f0875156004866dd6f46b88906d58
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
diff --git a/meta-facebook/meta-yosemite4/recipes-phosphor/fans/phosphor-pid-control/config.json b/meta-facebook/meta-yosemite4/recipes-phosphor/fans/phosphor-pid-control/config.json
index 291e0c5..8cfc2bb 100644
--- a/meta-facebook/meta-yosemite4/recipes-phosphor/fans/phosphor-pid-control/config.json
+++ b/meta-facebook/meta-yosemite4/recipes-phosphor/fans/phosphor-pid-control/config.json
@@ -371,7 +371,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -391,7 +391,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -411,7 +411,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -431,7 +431,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -451,7 +451,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -471,7 +471,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -491,7 +491,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -511,7 +511,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -531,7 +531,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -551,7 +551,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -571,7 +571,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0
@@ -591,7 +591,7 @@
"0": 20.0
},
"output": {
- "0": 60.0
+ "0": 100.0
},
"positiveHysteresis": 0,
"negativeHysteresis": 0