diff --git a/meta-ampere/meta-jade/conf/machine/mtjade.conf b/meta-ampere/meta-jade/conf/machine/mtjade.conf
index e749af6..558a6f4 100644
--- a/meta-ampere/meta-jade/conf/machine/mtjade.conf
+++ b/meta-ampere/meta-jade/conf/machine/mtjade.conf
@@ -29,6 +29,7 @@
 VOLATILE_LOG_DIR = "no"
 
 OBMC_IMAGE_EXTRA_INSTALL_append = "\
+                                   mtjade-utils \
                                    ampere-usbnet \
                                    ampere-flash-utils \
                                    ampere-mac-update \
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb
new file mode 100644
index 0000000..184d643
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils.bb
@@ -0,0 +1,18 @@
+SUMMARY = "Ampere Platform Environment Definitions"
+DESCRIPTION = "Ampere Platform Environment Definitions"
+PR = "r1"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+SRC_URI = " \
+          file://gpio-defs.sh \
+          file://ampere_power_util.sh \
+          "
+
+RDEPENDS_${PN} = "bash"
+
+do_install() {
+    install -d ${D}/usr/sbin
+    install -m 0755 ${WORKDIR}/gpio-defs.sh ${D}/${sbindir}/
+    install -m 0755 ${WORKDIR}/ampere_power_util.sh ${D}/${sbindir}/
+}
\ No newline at end of file
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_power_util.sh b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_power_util.sh
new file mode 100644
index 0000000..4ad07a6
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/ampere_power_util.sh
@@ -0,0 +1,147 @@
+#!/bin/bash
+#ampere_platform_config.sh is platform configuration file
+source /usr/sbin/gpio-defs.sh
+
+# Usage of this utility
+function usage() {
+  echo "usage: power-util mb [on|status|cycle|reset|graceful_reset|force_reset|soft_off]";
+}
+
+power_status() {
+  st=$(busctl get-property xyz.openbmc_project.State.Chassis /xyz/openbmc_project/state/chassis0 xyz.openbmc_project.State.Chassis CurrentPowerState | cut -d"." -f6)
+  if [ "$st" == "On\"" ]; then
+  echo "on"
+  else
+  echo "off"
+  fi
+}
+
+shutdown_ack() {
+  if [ -f "/run/openbmc/host@0-softpoweroff" ]; then
+    echo "Receive shutdown ACK triggered after softportoff the host."
+    touch /run/openbmc/host@0-softpoweroff-shutdown-ack
+  else
+    echo "Receive shutdown ACK triggered"
+<<<<<<< HEAD
+  fi
+}
+
+graceful_shutdown() {
+  if [ -f "/run/openbmc/host@0-request" ]; then
+    echo "shutdown host immediately"
+    power_off
+  else
+    echo "Triggering graceful shutdown"
+    gpioset -l 0 49=1
+    sleep 1
+    gpioset -l 0 49=0
+    sleep 30s
+=======
+    sleep 3
+    systemctl start obmc-chassis-poweroff@0.target
+>>>>>>> 397e033ef... meta-ampere: power control: refactor host power control
+  fi
+}
+
+soft_off() {
+  # Trigger shutdown_req
+  touch /run/openbmc/host@0-softpoweroff
+  gpioset -l $GPIO_CHIP0_IDX $S0_SHD_REQ_L=1
+  sleep 1s
+  gpioset -l $GPIO_CHIP0_IDX $S0_SHD_REQ_L=0
+
+  # Wait for shutdown_ack from the host in 30 seconds
+  cnt=30
+  while [ $cnt -gt 0 ];
+  do
+    # Wait for SHUTDOWN_ACK and create the host@0-softpoweroff-shutdown-ack
+    if [ -f "/run/openbmc/host@0-softpoweroff-shutdown-ack" ]; then
+      break
+    fi
+    sleep 1
+    cnt=$((cnt - 1))
+  done
+  # Softpoweroff is successed
+  sleep 2
+  rm -rf /run/openbmc/host@0-softpoweroff
+  if [ -f "/run/openbmc/host@0-softpoweroff-shutdown-ack" ]; then
+    rm -rf /run/openbmc/host@0-softpoweroff-shutdown-ack
+  fi
+  echo 0
+}
+
+force_reset() {
+  if [ -f "/run/openbmc/host@0-softpoweroff" ]; then
+    # In graceful host reset, after trigger os shutdown,
+    # the phosphor-state-manager will call force-warm-reset
+    # in this case the force_reset should wait for shutdown_ack from host
+    cnt=30
+    while [ $cnt -gt 0 ];
+    do
+      if [ -f "/run/openbmc/host@0-softpoweroff-shutdown-ack" ]; then
+        break
+      fi
+      echo "Waiting for shutdown-ack count down $cnt"
+      sleep 1
+      cnt=$((cnt - 1))
+    done
+    # The host OS is failed to shutdown
+    if [ $cnt == 0 ]; then
+      echo "Shutdown-ack time out after 30s."
+      exit 0
+    fi
+  fi
+  echo "Triggering sysreset pin"
+  gpioset -l $GPIO_CHIP0_IDX $S0_SYSRESET_L=1
+  sleep 1
+  gpioset -l $GPIO_CHIP0_IDX $S0_SYSRESET_L=0
+}
+
+if [ $# -lt 2 ]; then
+  echo "Total number of parameter=$#"
+  echo "Insufficient parameter"
+  usage;
+  exit 0;
+fi
+
+if [ $1 != "mb" ]; then
+  echo "Invalid parameter1=$1"
+  usage;
+  exit 0;
+fi
+
+# check if power guard enabled
+dir="/run/systemd/system/"
+file="reboot-guard.conf"
+units=("reboot" "poweroff" "halt")
+for unit in "${units[@]}"; do
+  if [ -f ${dir}${unit}.target.d/${file} ]; then
+    echo "PowerGuard enabled, cannot do power control, exit!!!"
+    exit -1
+  fi
+done
+
+if [ ! -d "/run/openbmc/" ]; then
+  mkdir -p "/run/openbmc/"
+fi
+
+if [ $2 == "shutdown_ack" ]; then
+  shutdown_ack
+elif [ $2 == "status" ]; then
+  power_status
+elif [ $2 == "force_reset" ]; then
+  force_reset
+elif [ $2 == "soft_off" ]; then
+  ret=$(soft_off)
+  if [ $ret == 0 ]; then
+    echo "The host is already softoff"
+  else
+    echo "Failed to softoff the host"
+  fi
+  exit $ret;
+else
+  echo "Invalid parameter2=$2"
+  usage;
+fi
+
+exit 0;
diff --git a/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/gpio-defs.sh b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/gpio-defs.sh
new file mode 100644
index 0000000..fce59d5
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-ampere/platform/mtjade-utils/gpio-defs.sh
@@ -0,0 +1,32 @@
+# Index of GPIO device in gpioget/gpioset
+GPIO_CHIP0_IDX=0
+GPIO_CHIP1_IDX=1
+
+# Base of GPIO chip in /sys/class/gpio
+GPIO_CHIP0_BASE=792
+GPIO_CHIP1_BASE=780
+
+### Power control configuration
+# Power control gpios
+S0_SHD_REQ_L=49
+S0_SHD_ACK_L=50
+S0_REBOOT_ACK_L=75
+S0_SYSRESET_L=91
+
+
+### Table 1: GPIO Assignments
+S0_CPU_FW_BOOT_OK=48
+CPU_BMC_OVERTEMP_L=51
+CPU_BMC_HIGHTEMP_L=72
+CPU_FAULT_ALERT=73
+S1_CPU_FW_BOOT_OK=202
+
+### Table 2: Alert and Additional Miscellaneous Signals
+S0_SCP_AUTH_FAILURE=74
+S1_SCP_AUTH_FAILURE=205
+BMC_OK=228
+SLAVE_PRESENT_L=230
+
+### Common GPIOs
+SYS_PSON_L=42
+BMC_READY=229
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling.bb b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling.bb
new file mode 100644
index 0000000..4358b12
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling.bb
@@ -0,0 +1,23 @@
+SUMMARY = "Ampere Computing LLC Host Gpio Handling"
+PR = "r1"
+LICENSE = "Apache-2.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Apache-2.0;md5=89aea4e17d99a7cacdbeed46a0096b10"
+
+inherit obmc-phosphor-systemd
+
+DEPENDS += "virtual/obmc-gpio-monitor"
+RDEPENDS_${PN} += "virtual/obmc-gpio-monitor"
+
+OBMC_HOST_ACK_MONITOR_INSTANCES = "reboot_ack shutdown_ack"
+
+SYSTEMD_ENVIRONMENT_FILE_${PN} +="obmc/gpio/reboot_ack \
+                                  obmc/gpio/shutdown_ack \
+                                 "
+
+TMPL = "phosphor-gpio-monitor@.service"
+INSTFMT = "phosphor-gpio-monitor@{0}.service"
+TGT = "multi-user.target"
+FMT = "../${TMPL}:${TGT}.requires/${INSTFMT}"
+
+SYSTEMD_SERVICE_${PN} += "ampere-host-shutdown-ack@.service"
+SYSTEMD_LINK_${PN} += "${@compose_list(d, 'FMT', 'OBMC_HOST_ACK_MONITOR_INSTANCES')}"
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/ampere-host-shutdown-ack@.service b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/ampere-host-shutdown-ack@.service
new file mode 100644
index 0000000..6588191
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/ampere-host-shutdown-ack@.service
@@ -0,0 +1,8 @@
+[Unit]
+Description=Ampere Computing LLC host shutdown ACK
+Conflicts=obmc-chassis-poweron@0.target
+
+[Service]
+Type=oneshot
+ExecStart=/usr/bin/env ampere_power_util.sh mb shutdown_ack
+SyslogIdentifier=ampere_host_shutdown_ack
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/obmc/gpio/reboot_ack b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/obmc/gpio/reboot_ack
new file mode 100644
index 0000000..a8ad98e
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/obmc/gpio/reboot_ack
@@ -0,0 +1,4 @@
+DEVPATH=/dev/input/event0
+KEY=75
+POLARITY=1
+TARGET=obmc-host-force-warm-reboot@0.target
diff --git a/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/obmc/gpio/shutdown_ack b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/obmc/gpio/shutdown_ack
new file mode 100644
index 0000000..18cc872
--- /dev/null
+++ b/meta-ampere/meta-jade/recipes-phosphor/gpio/host-gpio-handling/obmc/gpio/shutdown_ack
@@ -0,0 +1,4 @@
+DEVPATH=/dev/input/event0
+KEY=50
+POLARITY=1
+TARGET=ampere-host-shutdown-ack@0.service
diff --git a/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend b/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend
index 3af7022..ca86a4a 100644
--- a/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend
+++ b/meta-ampere/meta-jade/recipes-phosphor/packagegroups/packagegroup-obmc-apps.bbappend
@@ -1,2 +1,6 @@
 RDEPENDS_${PN}-extras_append_mtjade = " webui-vue phosphor-image-signing phosphor-virtual-sensor"
 RDEPENDS_${PN}-inventory_append_mtjade = " fault-monitor id-button psu-hotswap-reset"
+
+RDEPENDS_${PN}-inventory_append_mtjade = " \
+                                        host-gpio-handling \
+                                        "