| Peter Yin | 5e4a1aa | 2023-11-23 13:23:39 +0800 | [diff] [blame] | 1 | # large memory support |
| 2 | CONFIG_VMSPLIT_3G_OPT=y |
| 3 | CONFIG_HAVE_CLK=y |
| 4 | CONFIG_OF=y |
| 5 | # aspeed-adc driver |
| 6 | CONFIG_COMMON_CLK=y |
| 7 | CONFIG_ASPEED_ADC=y |
| 8 | # devmem |
| 9 | CONFIG_DEVMEM=y |
| 10 | # RTC |
| 11 | CONFIG_RTC_DRV_PCF85363=y |
| 12 | # USB EHCI |
| 13 | CONFIG_USB_EHCI_HCD=y |
| 14 | CONFIG_USB_EHCI_HCD_PLATFORM=y |
| 15 | # USB UART |
| 16 | CONFIG_USB_SERIAL=y |
| 17 | CONFIG_USB_SERIAL_CONSOLE=y |
| 18 | CONFIG_USB_SERIAL_FTDI_SIO=y |
| 19 | # REGULATOR |
| 20 | CONFIG_REGULATOR=y |
| 21 | CONFIG_REGULATOR_FIXED_VOLTAGE=y |
| 22 | # IPMI & IPMB |
| 23 | CONFIG_IPMI_HANDLER=y |
| 24 | CONFIG_IPMI_DEVICE_INTERFACE=y |
| 25 | # Enable loadable module |
| 26 | CONFIG_MODULES=y |
| 27 | |
| 28 | # Aspeed OTP |
| 29 | CONFIG_ASPEED_OTP=y |
| 30 | |
| 31 | # Aspeed SGPIO |
| 32 | CONFIG_GPIO_ASPEED_SGPIO=y |
| 33 | |
| 34 | # Aspeed PCC |
| 35 | CONFIG_ASPEED_LPC_PCC=y |
| 36 | |
| 37 | # Sensors |
| 38 | #CONFIG_SENSORS_ARIES=y |
| 39 | CONFIG_SENSORS_INA238=y |
| 40 | CONFIG_SENSORS_INA2XX=y |
| 41 | CONFIG_SENSORS_MP5990=y |
| 42 | CONFIG_SENSORS_MP2856=y |
| 43 | CONFIG_MCP9600=y |
| 44 | CONFIG_SENSORS_ADC128D818=y |
| 45 | |
| 46 | # APML |
| 47 | CONFIG_I3C=y |
| 48 | CONFIG_APML_SBRMI=y |
| 49 | CONFIG_APML_SBTSI=y |