Gitiles
Code Review Sign In
gerrit.openbmc.org / openbmc / bmcweb / 4a8f5d43ef740f9fe59bb75de64b5dedffe98202
commit4a8f5d43ef740f9fe59bb75de64b5dedffe98202[log] [tgz]
authorJohnathan Mantey <johnathanx.mantey@intel.com>Fri May 24 08:00:46 2024 -0700
committerEd Tanous <ed@tanous.net>Tue May 28 16:27:07 2024 +0000
tree837386411b18afa0adfd5b2e00996ba49d739b39
parentbdbfae2a0108de443fba5871c2fa21a4528b1f09 [diff]
Improve IPv4 default gateway removal

Removing the IPv4 default gateway doesn't work correctly when only a
single static address has been assigned. This is expected to be the
common mode of operation, and needs to work correctly.

When more than one static address is managed it's necessary to
preserve the existing gateway. If any address is left unmodified,
added, or is modified the gateway must be preserved.

Tested:
Turned off DHCPv4, and assigned a single static address
Sent a PATCH null to delete the address.
Confirmed the default gateway got cleared.

Assigned two static addresses.
Sent a PATCH {}, null
Sent PATCH null
Confirmed expected default gateway handling
Assigned two static addresses.
Sent a PATCH null, {}
Sent PATCH null
Confirmed expected default gateway handling

Change-Id: I85c4a0533f9468b424602aeb636b8f4f218a9a13
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
1 file changed
tree: 837386411b18afa0adfd5b2e00996ba49d739b39
  1. .github/
  2. config/
  3. http/
  4. include/
  5. redfish-core/
  6. scripts/
  7. src/
  8. static/
  9. subprojects/
  10. test/
  11. .clang-format
  12. .clang-tidy
  13. .codespell-ignore
  14. .dockerignore
  15. .gitignore
  16. .markdownlint.yaml
  17. .openbmc-enforce-gitlint
  18. .prettierignore
  19. .shellcheck
  20. AGGREGATION.md
  21. CLIENTS.md
  22. COMMON_ERRORS.md
  23. DBUS_USAGE.md
  24. DEVELOPING.md
  25. HEADERS.md
  26. LICENSE
  27. meson.build
  28. meson_options.txt
  29. OEM_SCHEMAS.md
  30. OWNERS
  31. README.md
  32. Redfish.md
  33. REDFISH_CHECKLIST.md
  34. run-ci
  35. TESTING.md
README.md

OpenBMC webserver

This component attempts to be a "do everything" embedded webserver for OpenBMC.

Features

The webserver implements a few distinct interfaces:

  • DBus event websocket. Allows registering on changes to specific dbus paths, properties, and will send an event from the websocket if those filters match.
  • OpenBMC DBus REST api. Allows direct, low interference, high fidelity access to dbus and the objects it represents.
  • Serial: A serial websocket for interacting with the host serial console through websockets.
  • Redfish: A protocol compliant, DBus to Redfish translator.
  • KVM: A websocket based implementation of the RFB (VNC) frame buffer protocol intended to mate to webui-vue to provide a complete KVM implementation.

Protocols

bmcweb at a protocol level supports http and https. TLS is supported through OpenSSL.

AuthX

Authentication

Bmcweb supports multiple authentication protocols:

  • Basic authentication per RFC7617
  • Cookie based authentication for authenticating against webui-vue
  • Mutual TLS authentication based on OpenSSL
  • Session authentication through webui-vue
  • XToken based authentication conformant to Redfish DSP0266

Each of these types of authentication is able to be enabled or disabled both via runtime policy changes (through the relevant Redfish APIs) or via configure time options. All authentication mechanisms supporting username/password are routed to libpam, to allow for customization in authentication implementations.

Authorization

All authorization in bmcweb is determined at routing time, and per route, and conform to the Redfish PrivilegeRegistry.

*Note: Non-Redfish functions are mapped to the closest equivalent Redfish privilege level.

Configuration

bmcweb is configured per the meson build files. Available options are documented in meson_options.txt

Compile bmcweb with default options

meson setup builddir
ninja -C builddir

If any of the dependencies are not found on the host system during configuration, meson will automatically download them via its wrap dependencies mentioned in bmcweb/subprojects.

Use of persistent data

bmcweb relies on some on-system data for storage of persistent data that is internal to the process. Details on the exact data stored and when it is read/written can seen from the persistent_data namespace.

TLS certificate generation

When SSL support is enabled and a usable certificate is not found, bmcweb will generate a self-signed a certificate before launching the server. Please see the bmcweb source code for details on the parameters this certificate is built with.

Redfish Aggregation

bmcweb is capable of aggregating resources from satellite BMCs. Refer to AGGREGATION.md for more information on how to enable and use this feature.