Redfish: Permit Usb and CD boot overrides
Implemented corrections to allow booting from removeable media. USB
did not function, and CD was also failing.
Eliminated code that calculated the boot string and boot mode
twice. Always assigned a boot type and boot mode, to simplify the
asynchronous function calls.
Changed the Redfish result to return "204 No Content" when the PATCH
operation is successful. Any async function call that fails overrides
this value.
Tested:
Performed a full set of BootSource/BootMode combinations. Confirmed
the values were set correctly by using "ipmitool raw 0 9 5 0 0" to
read the values that the BIOS will read after a reboot.
Also tested the full set of combinations by issuing hard resets. All
boot combinations worked on a S2600WF within the limits of the S2600WF
BIOS.
Change-Id: If5480e20040d96bc12961125fdbd4ebbb30b0ada
Signed-off-by: Johnathan Mantey <johnathanx.mantey@intel.com>
diff --git a/redfish-core/lib/systems.hpp b/redfish-core/lib/systems.hpp
index 294698e..1bb2bf1 100644
--- a/redfish-core/lib/systems.hpp
+++ b/redfish-core/lib/systems.hpp
@@ -724,7 +724,7 @@
return "Pxe";
}
else if (dbusSource ==
- "xyz.openbmc_project.Control.Boot.Source.Sources.Removable")
+ "xyz.openbmc_project.Control.Boot.Source.Sources.RemovableMedia")
{
return "Usb";
}
@@ -763,67 +763,64 @@
}
/**
- * @brief Traslates boot source from Redfish to DBUS property value.
+ * @brief Traslates boot source from Redfish to the DBus boot paths.
*
* @param[in] rfSource The boot source in Redfish.
+ * @param[out] bootSource The DBus source
+ * @param[out] bootMode the DBus boot mode
*
- * @return Returns as a string, the boot source as expected by DBUS.
- * If translation cannot be done, returns an empty string.
+ * @return Integer error code.
*/
-static std::string rfToDbusBootSource(const std::string &rfSource)
+static int assignBootParameters(std::shared_ptr<AsyncResp> aResp,
+ const std::string &rfSource,
+ std::string &bootSource, std::string &bootMode)
{
+ // The caller has initialized the bootSource and bootMode to:
+ // bootMode = "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular";
+ // bootSource = "xyz.openbmc_project.Control.Boot.Source.Sources.Default";
+ // Only modify the bootSource/bootMode variable needed to achieve the
+ // desired boot action.
+
if (rfSource == "None")
{
- return "xyz.openbmc_project.Control.Boot.Source.Sources.Default";
- }
- else if (rfSource == "Hdd")
- {
- return "xyz.openbmc_project.Control.Boot.Source.Sources.Disk";
- }
- else if (rfSource == "Cd")
- {
- return "xyz.openbmc_project.Control.Boot.Source.Sources.ExternalMedia";
+ return 0;
}
else if (rfSource == "Pxe")
{
- return "xyz.openbmc_project.Control.Boot.Source.Sources.Network";
+ bootSource = "xyz.openbmc_project.Control.Boot.Source.Sources.Network";
+ }
+ else if (rfSource == "Hdd")
+ {
+ bootSource = "xyz.openbmc_project.Control.Boot.Source.Sources.Disk";
+ }
+ else if (rfSource == "Diags")
+ {
+ bootMode = "xyz.openbmc_project.Control.Boot.Mode.Modes.Safe";
+ }
+ else if (rfSource == "Cd")
+ {
+ bootSource =
+ "xyz.openbmc_project.Control.Boot.Source.Sources.ExternalMedia";
+ }
+ else if (rfSource == "BiosSetup")
+ {
+ bootMode = "xyz.openbmc_project.Control.Boot.Mode.Modes.Setup";
}
else if (rfSource == "Usb")
{
- return "xyz.openbmc_project.Control.Boot.Source.Sources.Removable";
+ bootSource =
+ "xyz.openbmc_project.Control.Boot.Source.Sources.RemovableMedia";
}
else
{
- return "";
+ BMCWEB_LOG_DEBUG << "Invalid property value for "
+ "BootSourceOverrideTarget: "
+ << bootSource;
+ messages::propertyValueNotInList(aResp->res, rfSource,
+ "BootSourceTargetOverride");
+ return -1;
}
-}
-
-/**
- * @brief Traslates boot mode from Redfish to DBUS property value.
- *
- * @param[in] rfMode The boot mode in Redfish.
- *
- * @return Returns as a string, the boot mode as expected by DBUS.
- * If translation cannot be done, returns an empty string.
- */
-static std::string rfToDbusBootMode(const std::string &rfMode)
-{
- if (rfMode == "None")
- {
- return "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular";
- }
- else if (rfMode == "Diags")
- {
- return "xyz.openbmc_project.Control.Boot.Mode.Modes.Safe";
- }
- else if (rfMode == "BiosSetup")
- {
- return "xyz.openbmc_project.Control.Boot.Mode.Modes.Setup";
- }
- else
- {
- return "";
- }
+ return 0;
}
/**
@@ -862,7 +859,7 @@
aResp->res.jsonValue["Boot"]["BootSourceOverrideMode"] = "Legacy";
aResp->res.jsonValue["Boot"]["BootSourceOverrideTarget@Redfish."
"AllowableValues"] = {
- "None", "Pxe", "Hdd", "Cd", "Diags", "BiosSetup"};
+ "None", "Pxe", "Hdd", "Cd", "Diags", "BiosSetup", "Usb"};
if (*bootModeStr !=
"xyz.openbmc_project.Control.Boot.Mode.Modes.Regular")
@@ -993,17 +990,13 @@
std::optional<std::string> bootSource,
std::optional<std::string> bootEnable)
{
- if (bootEnable && (bootEnable != "Once") && (bootEnable != "Continuous") &&
- (bootEnable != "Disabled"))
- {
- BMCWEB_LOG_DEBUG << "Unsupported value for BootSourceOverrideEnabled: "
- << *bootEnable;
- messages::propertyValueNotInList(aResp->res, *bootEnable,
- "BootSourceOverrideEnabled");
- return;
- }
-
+ std::string bootSourceStr =
+ "xyz.openbmc_project.Control.Boot.Source.Sources.Default";
+ std::string bootModeStr =
+ "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular";
bool oneTimeSetting = oneTimeEnabled;
+ bool useBootSource = true;
+
// Validate incoming parameters
if (bootEnable)
{
@@ -1017,11 +1010,12 @@
}
else if (*bootEnable == "Disabled")
{
+ BMCWEB_LOG_DEBUG << "Boot source override will be disabled";
oneTimeSetting = false;
+ useBootSource = false;
}
else
{
-
BMCWEB_LOG_DEBUG << "Unsupported value for "
"BootSourceOverrideEnabled: "
<< *bootEnable;
@@ -1030,118 +1024,61 @@
return;
}
}
- std::string bootSourceStr;
- std::string bootModeStr;
- if (bootSource)
- {
- bootSourceStr = rfToDbusBootSource(*bootSource);
- bootModeStr = rfToDbusBootMode(*bootSource);
- BMCWEB_LOG_DEBUG << "DBUS boot source: " << bootSourceStr;
- BMCWEB_LOG_DEBUG << "DBUS boot mode: " << bootModeStr;
-
- if (bootSourceStr.empty() && bootModeStr.empty())
- {
- BMCWEB_LOG_DEBUG << "Invalid property value for "
- "BootSourceOverrideTarget: "
- << *bootSource;
- messages::propertyValueNotInList(aResp->res, *bootSource,
- "BootSourceTargetOverride");
- return;
- }
- }
- const char *bootObj =
- oneTimeSetting ? "/xyz/openbmc_project/control/host0/boot/one_time"
- : "/xyz/openbmc_project/control/host0/boot";
- // Figure out what properties to set
- if (bootEnable && (*bootEnable == "Disabled"))
- {
- BMCWEB_LOG_DEBUG << "Boot source override will be disabled";
- // Request to only turn OFF/ON enabled, if turning enabled OFF, need
- // to reset the source and mode too. If turning it ON, we only need
- // to set the enabled property
- bootSourceStr =
- "xyz.openbmc_project.Control.Boot.Source.Sources.Default";
- bootModeStr = "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular";
- }
- else if (bootSource)
+ if (bootSource && useBootSource)
{
// Source target specified
BMCWEB_LOG_DEBUG << "Boot source: " << *bootSource;
// Figure out which DBUS interface and property to use
- bootSourceStr = rfToDbusBootSource(*bootSource);
- bootModeStr = rfToDbusBootMode(*bootSource);
-
- BMCWEB_LOG_DEBUG << "DBUS boot source: " << bootSourceStr;
- BMCWEB_LOG_DEBUG << "DBUS boot mode: " << bootModeStr;
-
- if (bootSourceStr.empty() && bootModeStr.empty())
+ if (assignBootParameters(aResp, *bootSource, bootSourceStr,
+ bootModeStr))
{
- BMCWEB_LOG_DEBUG << "Invalid property value for "
- "BootSourceOverrideTarget: "
- << *bootSource;
+ BMCWEB_LOG_DEBUG
+ << "Invalid property value for BootSourceOverrideTarget: "
+ << *bootSource;
messages::propertyValueNotInList(aResp->res, *bootSource,
"BootSourceTargetOverride");
return;
}
+ }
- if (!bootSourceStr.empty())
- {
- // If setting to anything other than default, also reset boot
- // mode property
- if (bootSourceStr !=
- "xyz.openbmc_project.Control.Boot.Source.Sources.Default")
+ // Act on validated parameters
+ BMCWEB_LOG_DEBUG << "DBUS boot source: " << bootSourceStr;
+ BMCWEB_LOG_DEBUG << "DBUS boot mode: " << bootModeStr;
+ const char *bootObj =
+ oneTimeSetting ? "/xyz/openbmc_project/control/host0/boot/one_time"
+ : "/xyz/openbmc_project/control/host0/boot";
+
+ crow::connections::systemBus->async_method_call(
+ [aResp](const boost::system::error_code ec) {
+ if (ec)
{
- bootModeStr =
- "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular";
+ BMCWEB_LOG_DEBUG << "DBUS response error " << ec;
+ messages::internalError(aResp->res);
+ return;
}
- }
- else // if (!bootModeStr.empty())
- {
- // If setting to anything other than default, also reset boot
- // source property
- if (bootModeStr !=
- "xyz.openbmc_project.Control.Boot.Mode.Modes.Regular")
+ BMCWEB_LOG_DEBUG << "Boot source update done.";
+ },
+ "xyz.openbmc_project.Settings", bootObj,
+ "org.freedesktop.DBus.Properties", "Set",
+ "xyz.openbmc_project.Control.Boot.Source", "BootSource",
+ std::variant<std::string>(bootSourceStr));
+
+ crow::connections::systemBus->async_method_call(
+ [aResp](const boost::system::error_code ec) {
+ if (ec)
{
- bootSourceStr =
- "xyz.openbmc_project.Control.Boot.Source.Sources.Default";
+ BMCWEB_LOG_DEBUG << "DBUS response error " << ec;
+ messages::internalError(aResp->res);
+ return;
}
- }
- }
- if (!bootSourceStr.empty())
- {
- crow::connections::systemBus->async_method_call(
- [aResp](const boost::system::error_code ec) {
- if (ec)
- {
- BMCWEB_LOG_DEBUG << "DBUS response error " << ec;
- messages::internalError(aResp->res);
- return;
- }
- BMCWEB_LOG_DEBUG << "Boot source update done.";
- },
- "xyz.openbmc_project.Settings", bootObj,
- "org.freedesktop.DBus.Properties", "Set",
- "xyz.openbmc_project.Control.Boot.Source", "BootSource",
- std::variant<std::string>(bootSourceStr));
- }
- if (!bootModeStr.empty())
- {
- crow::connections::systemBus->async_method_call(
- [aResp](const boost::system::error_code ec) {
- if (ec)
- {
- BMCWEB_LOG_DEBUG << "DBUS response error " << ec;
- messages::internalError(aResp->res);
- return;
- }
- BMCWEB_LOG_DEBUG << "Boot mode update done.";
- },
- "xyz.openbmc_project.Settings", bootObj,
- "org.freedesktop.DBus.Properties", "Set",
- "xyz.openbmc_project.Control.Boot.Mode", "BootMode",
- std::variant<std::string>(bootModeStr));
- }
+ BMCWEB_LOG_DEBUG << "Boot mode update done.";
+ },
+ "xyz.openbmc_project.Settings", bootObj,
+ "org.freedesktop.DBus.Properties", "Set",
+ "xyz.openbmc_project.Control.Boot.Mode", "BootMode",
+ std::variant<std::string>(bootModeStr));
+
crow::connections::systemBus->async_method_call(
[aResp{std::move(aResp)}](const boost::system::error_code ec) {
if (ec)
@@ -1528,14 +1465,13 @@
std::optional<nlohmann::json> bootProps;
auto asyncResp = std::make_shared<AsyncResp>(res);
- if (!json_util::readJson(req, asyncResp->res, "IndicatorLED",
- indicatorLed, "Boot", bootProps))
+ if (!json_util::readJson(req, res, "IndicatorLED", indicatorLed, "Boot",
+ bootProps))
{
return;
}
- asyncResp->res.result(boost::beast::http::status::no_content);
-
+ res.result(boost::beast::http::status::no_content);
if (bootProps)
{
std::optional<std::string> bootSource;