Virtual sensors

Author: Vijay Khemka vijaykhemka@fb.com; <vijay!>

Created: 2020-05-13

Problem Description

There are some sensors in the system whose values are derived from actual sensor data and some other factor like fan speed for temperature sensors, some complex and non standard scale factors or some other algorithmic calculations. Some of Virtual sensor examples are:

  1. Airflow: Function of Fan RPM reported in units of cubic-feet per second.
  2. Voltage delta between two ADC inputs. When the actual diff is what which should not cross a threshold.
  3. Power consumption when we have Energy/time.

This design will allow to generate a new virtual sensors which are defined to be specific manipulation/function of existing sensors.

Background and References

None.

Requirements

This should implement a new virtual sensor for every given sensor and update them as per changes in existing sensors. This implementation should provide

  • a daemon to create and monitor each sensor defined in config file and update them based on value change in each given sensor.
  • Every virtual sensor will be waiting for event for change in dbus value of each sensor parameter and will update this sensor.
  • Sensor parameter can be any sensor dbus path and it also supports chaining of virtual sensors.
  • a dbus interface like other sensors to allow other services to access its data
  • capability to read parameter details from config file
  • capability to read a algorithm string from config file and use the same algorithm in calculating value for new virtual sensor

Proposed Design

Create a D-bus service "xyz.openbmc_project.VirtualSensor" with object paths for each sensor: "/xyz/openbmc_project/sensor/temperature/sensor_name"

There is a JSON configuration file for name, old path and algorithm. For example,

  {
    "Desc" :
    {
        "Name" : "Virtual_Inlet_Temp",
        "SensorType" : "temperature"
    },
    "Params":
    {
      "ConstParam" :
      [
        {
          "ParamName" : "P1",
          "Value" : 1.1
        }
      ],
      "DbusParam" :
      [
        {
          "ParamName" : "P2",
          "Desc" :
          {
              "Name" : "MB_INLET_TEMP",
              "SensorType" : "temperature"
          }
        },
        {
          "ParamName" : "P3",
          "Desc" :
          {
            "Name" : "MB_FAN0_TACH",
            "SensorType" : "fan_tach"
          }
        }
      ]
    },
    "Expression": "P1 + P2 + 5 - P3 * 0.1",
    "Thresholds":
    {
      "CriticalHigh": 90,
      "CriticalLow": 20,
      "WarningHigh": 70,
      "WarningLow": 30
    }
  }

Desc:       It defines name and unit of a sensor. Main Desc object defines
            details about new virtual sensor and inside DbusParam object,
            it defines details about existing dbus sensors.
Name:       Name of virtual sensor
SensorType: Unit type of sensors and supported
Expression: An algorithm to be used to calculate sensor value
Params:     There are currently 2 types of parameter supported ConstParam
            and DbusParam. Every pamas should have a name to be reffered
            in expression
ConstParam: This is a parameter which has a constant value defined here
DbusParam:  This is an existing/virtual sensor which is listed in dbus and
            it's value can be read from dbus path
Thresholds: It has critical and warning high/low value to monitor sensor
            value and used as per sensor interface defined in
            phosphor-dbus-interfaces.

Alternatives Considered

None

Impacts

This application is monitoring existing sensors whenever they change values then only it will update this sensors so impact should be very minimal.

Testing

Testing can be done by monitoring data read from dbus interface over a period of time and also can see these data if it changes by comparing with given sensors.