Sensor Support for OpenBMC

OpenBMC makes it easy to add sensors for your hardware and is compliant with the traditional Linux HWMon sensor format. The architecture of OpenBMC sensors is to map sensors to D-Bus objects. The D-Bus object will broadcast the PropertiesChanged signal when either the sensor or threshold value changes. It is the responsibility of other applications to determine the effect of the signal on the system.

D-Bus

Service     xyz.openbmc_project.Hwmon-<hash>.Hwmon1
Path        /xyz/openbmc_project/sensors/<type>/<label>
Interfaces  xyz.openbmc_project.Sensor.[*], others (see below)

Signals: All properties for an interface will broadcast signal changed

Path definitions

  • <type> : The HWMon class name in lower case.

    • Examples include temperature, fan_tach, voltage.
  • <label> : User defined name of the sensor.

    • Examples include ambient, cpu0, fan5

Note: The label shall comply with "Valid Object Paths" of D-Bus Spec, that shall only contain the ASCII characters "[A-Z][a-z][0-9]_".

Hash definition

The hash value in the service name is used to give the service a unique and stable name. It is a decimal number that is obtained by hashing characteristics of the device it is monitoring using std::hash().

Redfish

The BMCWeb Redfish support returns information about sensors. The support depends on two types of ObjectMapper associations to find the necessary sensor information on D-Bus.

Association Type #1: Linking a chassis to all sensors within the chassis

Sensors are grouped by chassis in Redfish. An ObjectMapper association is used to link a chassis to all the sensors within the chassis. This includes the sensors for all hardware that is considered to be within the chassis. For example, a chassis might contain two fan sensors, an ambient temperature sensor, and a VRM output voltage sensor.

D-Bus object paths

The association links the following D-Bus object paths together:

  • Chassis inventory item object path
  • List of sensor object paths for sensors within the chassis

Association names

  • "all_sensors"
    • Contains the list of all sensors for this chassis
  • "chassis"
    • Contains the chassis associated with this sensor

Example associations

  • /xyz/openbmc_project/inventory/system/chassis/all_sensors
    • "endpoints" property contains
      • /xyz/openbmc_project/sensors/fan_tach/fan0_0
      • /xyz/openbmc_project/sensors/fan_tach/fan0_1
      • /xyz/openbmc_project/sensors/temperature/ambient
      • /xyz/openbmc_project/sensors/voltage/p0_vdn_voltage
  • /xyz/openbmc_project/sensors/fan_tach/fan0_0/chassis
    • "endpoints" property contains
      • /xyz/openbmc_project/inventory/system/chassis

Association Type #2: Linking a low-level hardware item to its sensors

A sensor is usually related to a low-level hardware item, such as a fan, power supply, VRM, or CPU. The Redfish sensor support can obtain the following information from the related hardware item:

For this reason, an ObjectMapper association is used to link a low-level hardware item to its sensors. For example, a processor VRM could have temperature and output voltage sensors, or a dual-rotor fan could have two tach sensors.

D-Bus object paths

The association links the following D-Bus object paths together:

  • Low-level hardware inventory item object path
  • List of sensor object paths for sensors related to that hardware item

Association names

  • "sensors"
    • Contains the list of sensors for this low-level hardware item
  • "inventory"
    • Contains the low-level hardware inventory item for this sensor

Example associations

  • /xyz/openbmc_project/inventory/system/chassis/motherboard/fan0/sensors
    • "endpoints" property contains
      • /xyz/openbmc_project/sensors/fan_tach/fan0_0
      • /xyz/openbmc_project/sensors/fan_tach/fan0_1
  • /xyz/openbmc_project/sensors/fan_tach/fan0_0/inventory
    • "endpoints" property contains
      • /xyz/openbmc_project/inventory/system/chassis/motherboard/fan0

Development Details

Sensor properties are standardized based on the type of sensor. A Threshold sensor contains specific properties associated with the rise and fall of a sensor value. The Sensor Interfaces are described in their respective YAML files. The path location in the source tree is identical to the interface being described below the phosphor-dbus-interfaces parent directory.

        example: openbmc/phosphor-dbus-interfaces/xyz/openbmc_project/Sensor/Threshold/Warning.yaml

        Maps to D-Bus interface xyz.openbmc_project.Sensor.Threshold.Warning

Each 'name' property in the YAML file maps directly to D-Bus properties.

        example:

        Warning.interface.yaml

properties:
    - name: WarningHigh
      type: int64
    - name: WarningLow
      type: int64
    - name: WarningAlarmHigh
      type: boolean
    - name: WarningAlarmLow
      type: boolean

Maps to

busctl --system introspect xyz.openbmc_project.Hwmon-3301914901.Hwmon1 \
 /xyz/openbmc_project/Sensors/temperature/ambient \
 xyz.openbmc_project.Sensor.Threshold.Warning | grep property

.WarningAlarmHigh                            property  b         false        emits-change writable
.WarningAlarmLow                             property  b         false        emits-change writable
.WarningHigh                                 property  x         40000        emits-change writable
.WarningLow                                  property  x         10000        emits-change writable

REST

"/xyz/openbmc_project/Sensors/temperature/ambient": {
      "Scale": -3,
      "Unit": "xyz.openbmc_project.Sensor.Value.Unit.DegreesC",
      "Value": 30125,
      "WarningAlarmHigh": 0,
      "WarningAlarmLow": 0,
      "WarningHigh": 40000,
      "WarningLow": 10000
}

Other Interfaces

Aside from the xyz.openbmc_project.Sensor interfaces, the sensor D-Bus objects may also expose the following interfaces:

  1. xyz.openbmc_project.Control.FanSpeed
    • Provides a Target property to set a fan RPM value
  2. xyz.openbmc_project.Control.FanPwm
    • Provides a Target property to set a fan PWM value
  3. xyz.openbmc_project.State.Decorator.OperationalStatus
    • Provides a Functional property that tracks the state of any fault files

Signals

Any property value change broadcasts a signal on D-Bus. When a value trips past a threshold, an additional D-Bus signal is sent.

Example, if the value of WarningLow is 5...

FromTopropertyChanged Signals
15"xyz.openbmc_project.Sensor.Value" : value = 5
16"xyz.openbmc_project.Sensor.Value" : value = 6 ,
"xyz.openbmc_project.Sensor.Threshold.Warning" : WarningAlarmLow = 0
56"xyz.openbmc_project.Sensor.Value" : value = 6
61"xyz.openbmc_project.Sensor.Value" : value = 1 ,
"xyz.openbmc_project.Sensor.Threshold.Warning" : WarningAlarmLow = 1

System Configuration

On the BMC each sensor's configuration is located in a file. These files can be found as a child of the /etc/default/obmc/hwmon path.

Creating a Sensor

There are two techniques to add a sensor to your system and which to use depends on if your system defines sensors via an MRW (Machine Readable Workbook) or not.

My sensors are not defined in an MRW

HWMon sensors are defined in the recipes-phosphor/sensor/phosphor-hwmon% path within the machine configuration. The children of the obmc/hwmon directory should follow the path of either:

  1. The children of the devicetree/base directory path on the system, as defined by the kernel. The code obtains this from the OF_FULLNAME udev environment variable.

  2. If the device isn't in the device tree, then the device path can be used.

As an example, the Palmetto configuration file for the ambient temperature sensor.

recipes-phosphor/sensors/phosphor-hwmon%/obmc/hwmon/ahb/apb/i2c@1e78a000/i2c-bus@c0/tmp423@4c.conf

which maps to this specific sensor and conf file on the system...

/sys/firmware/devicetree/base/ahb/apb/i2c@1e78a000/i2c-bus@c0/tmp423@4c
/etc/default/obmc/hwmon/ahb/apb/i2c@1e78a000/i2c-bus@c0/tmp423@4c.conf

This next example shows using the device path as opposed to the devicetree path for the OCC device on an OpenPOWER system. Note how a '--' replaces a ':' in the directory names for the conf file.

recipes-phosphor/sensors/phosphor-hwmon%/obmc/hwmon/devices/platform/gpio-fsi/fsi0/slave@00--00/00--00--00--06/sbefifo1-dev0/occ-hwmon.1.conf

which maps to this specific sensor and conf file on the system...

/sys/devices/platform/gpio-fsi/fsi0/slave@00:00/00:00:00:06/sbefifo1-dev0/occ-hwmon.1
/etc/default/obmc/hwmon/devices/platform/gpio-fsi/fsi0/slave@00--00/00--00--00--06/sbefifo1-dev0/occ-hwmon.1.conf

In order for the sensor to be exposed to D-Bus, the configuration file must describe the sensor attributes. Attributes follow a format.

xxx_yyy#=value

xxx = Attribute
#   = Association number (i.e. 1-n)
yyy = HWMon sensor type (i.e. temp, pwm)
AttributeInterfaces Added
LABELxyz.openbmc_project.Sensor.Value
WARNHI, WARNLOxyz.openbmc_project.Threshold.Warning
CRITHI, CRITLOxyz.openbmc_project.Threshold.Critical

The HWMon sensor type

HWMon sensor typetype
temptemperature
involtage
*All other names map directly

See the HWMon interface definitions for more definitions and keyword details

In this conf example the tmp423 chip is wired to two temperature sensors. The values must be described in 10-3 degrees Celsius.

LABEL_temp1=ambient
WARNLO_temp1=10000
WARNHI_temp1=40000

LABEL_temp2=cpu
WARNLO_temp2=10000
WARNHI_temp2=80000

Additional Config File Entries

The phosphor-hwmon code supports these additional config file entries:

INTERVAL

The interval, in microseconds, at which sensors should be read. If not specified the interval is 1000000us (1 second).

INTERVAL=1000000

GAIN, OFFSET

Used to support scaled sensor readings, where value = (raw sensor reading) * gain + offset

GAIN_in3 = 5.0  #GAIN is a double
OFFSET_in3 = 6  #OFFSET is an integer

MINVALUE, MAXVALUE

If found, will be used to set the MinValue/MaxValue properties on the xyz.openbmc_project.Sensor.Value interface.

MINVALUE_temp1 = 1

MODE

Needed for certain device drivers, specifically the OpenPOWER OCC driver, where the instance number (the N in tempN_input) is dynamic and instead another file contains the known ID.

For example

temp26_input:29000
temp26_label:171

Where the 26 is just what hwmon assigns, but the 171 corresponds to something like an IPMI sensor value for a DIMM temperature.

The config file would then have:

MODE_temp26 = "label"  #Tells the code to look in temp26_label
LABEL_temp171 = "dimm3_temp" #Says that temp26_input holds dimm3_temp

REMOVERCS

Contains a list of device driver errno values where if these are obtained when reading the hardware, the corresponding sensor object will be removed from D-Bus until it is successfully read again.

REMOVERCS = "5,6"  #If any sensor on the device returns a 5 or 6, remove it.
REMOVERCS_temp1 = "42"  #If reading temp1_input returns a 42, remove it.

TARGET_MODE

Allows one to choose the fan target mode, either RPM or PWM, if the device driver exposes both methods.

TARGET_MODE = "RPM"

PWM_TARGET

For fans that are PWM controlled, can be used to map the pwmN file to a fan M.

PWM_TARGET_fan0 = 1 #Use the pwm1 file to control fan 0

ENABLE

Will write a value to a pwmN_enable file on startup if present.

ENABLE_fan1 = 2 #Write a 2 to pwm1_enable

Defining sensors in an IPMI YAML configuration file

For an example of how sensors entries are defined, consult the example YAML

How to best choose coefficients

Sensor reading, according to IPMI spec, is calculated as:

y = L[(Mx + B * 10^(bExp)) * 10^(rExp)]
  • y: the 'final value' as reported by IPMItool
  • x: 8 bits, unsigned, reading data encoded in IPMI response packet
  • M: 10 bits, signed integer multiplier, multiplierM in YAML
  • B: 10 bits, signed additive offset, offsetB in YAML
  • bExp: 4 bits, signed, bExp in YAML
  • rExp: 4 bits, signed, rExp in YAML

In addition, phosphor-ipmi-host configuration also supports scale property, which applies for analog sensors, meaning the value read over DBus should be scaled by 10^S.

As you can tell, one should choose the coefficients based on possible sensor reading range and desired resolution. Commonly, B=0, we would have

Supported range: [0, 255 * M * 10^(scale - rExp)]
Resolution: M * 10^(scale - rExp)

For a concrete example, let's say a voltage sensor reports between 0 to 5.0V. hwmon sysfs scales the value by 1000, so the sensor value read over DBus is between 0 and 5000. A possible configuration for this is:

multiplierM: 20
offsetB: 0
bExp: 0
rExp: -3
scale: -3

so for a DBus sensor value of 4986 meaning 4.986V, phosphor-ipmi-host would encode it as

x: 4986 / 20 = 249
M: 20
rExp: -3

When ipmitool sensor list is called, the tool fetches sensor factors and computes value as:

y = 20 * 249 * 10^-3 = 4.98 (V)

My sensors are defined in an MRW

Setting up sensor support with an MRW is done by adding a unit-hwmon-feature unit, for each hwmon feature needing to be monitored and then filling in the HWMON_FEATURE attribute. The XML field is required however a D-Bus interface will only be generated when the value property is not null. Values for Thresholds follow the HWMon format of no decimals. Temperature values must be described in 10-3 degrees Celsius. The HWMON_NAME will be used to derive the <type> while the DESCRIPTIVE_NAME creates the <label> for the instance path.

Field idValue RequiredInterfaces Added
HWMON_NAMEYxyz.org.openbmc_project.Sensor.Value
WARN_LOW, WARN_HIGHNxyz.openbmc_project.Threshold.Warning
CRIT_LOW, CRIT_HIGHNxyz.openbmc_project.Threshold.Critical

Here is an example of a Fan sensor. If the RPMs go above 80000 or below 1000 addition signals will be sent over D-Bus. Note that neither CRIT_LOW or CRIT_HIGH is set so xyz.org.openbmc_project.Threshold.Critical will not be added. The instance path will be /xyz/openbmc_project/Sensors/fan/fan0.

<targetInstance>
	<id>MAX31785.hwmon2</id>
	<type>unit-hwmon-feature</type>
	...
	<attribute>
		<id>HWMON_FEATURE</id>
		<default>
				<field><id>HWMON_NAME</id><value>fan1</value></field>
				<field><id>DESCRIPTIVE_NAME</id><value>fan0</value></field>
				<field><id>WARN_LOW</id><value>1000</value></field>
				<field><id>WARN_HIGH</id><value>80000</value></field>
				<field><id>CRIT_LOW</id><value></value></field>
				<field><id>CRIT_HIGH</id><value></value></field>
		</default>
	</attribute>

Additional Reading

Mailing List Comments on Sensor design