diff --git a/code-update/host-code-update.md b/code-update/host-code-update.md
index e388de6..e94cace 100644
--- a/code-update/host-code-update.md
+++ b/code-update/host-code-update.md
@@ -125,3 +125,8 @@
 
 The partition binary file must be named the same as the partition name that
 intends to patch, ex: `ATTR_TMP`.
+
+### Associations
+
+Information about Associations can be found at
+[ubi-code-update.md#associations](ubi-code-update.md#associations)
diff --git a/code-update/ubi-code-update.md b/code-update/ubi-code-update.md
index 80f6e41..1fb233c 100644
--- a/code-update/ubi-code-update.md
+++ b/code-update/ubi-code-update.md
@@ -111,6 +111,137 @@
       curl -b cjar -k https://${bmc}/xyz/openbmc_project/software/<id>/attr/Progress
       ```
 
+6. Check that the activation is complete by verifying the "Activation" property
+is set to "Active" via one of the following methods:
+
+  * Method 1: From the BMC command line:
+
+      ```
+      busctl get-property xyz.openbmc_project.Software.BMC.Updater \
+        /xyz/openbmc_project/software/<id> \
+        xyz.openbmc_project.Software.Activation Activation
+      ```
+
+  * Method 2: Using the REST API:
+
+      ```
+      curl -b cjar -k https://${bmc}/xyz/openbmc_project/software/<id>
+      ```
+
+7. Reboot the BMC for the image to take effect.
+
+  * Method 1: From the BMC command line:
+
+      ```
+      reboot
+      ```
+
+  * Method 2: Using the REST API:
+
+      ```
+      curl -c cjar -b cjar -k -H "Content-Type: application/json" -X PUT \
+          -d '{"data": "xyz.openbmc_project.State.BMC.Transition.Reboot"}' \
+          https://${bmc}/xyz/openbmc_project/state/bmc0/attr/RequestedBMCTransition
+      ```
+
+### Associations
+
+In addition to all software images, several associations are listed at
+`/xyz/openbmc_project/software/`:
+
+```
+curl -c cjar -b cjar -k -H "Content-Type: application/json" -X GET  \
+    https://${bmc}/xyz/openbmc_project/software/
+{
+  "data": [
+    "/xyz/openbmc_project/software/46e65782",
+    "/xyz/openbmc_project/software/493a00ad",
+    "/xyz/openbmc_project/software/88c153b1",
+    "/xyz/openbmc_project/software/active",
+    "/xyz/openbmc_project/software/functional"
+  ],
+  "message": "200 OK",
+  "status": "ok"
+}
+```
+
+1. A "functional" association to the "running" BMC and host images
+
+There is only one functional association per BMC and one functional association per host.
+The functional/running BMC image is the BMC image with the lowest priority when
+rebooting the BMC. The functional image does not update until the BMC is rebooted.
+The functional host image behaves the same way except that it updates on a
+power on or reboot of the host.
+
+```
+curl -c cjar -b cjar -k -H "Content-Type: application/json" -X GET \
+    https://${bmc}/xyz/openbmc_project/software/functional
+{
+  "data": {
+    "endpoints": [
+      "/xyz/openbmc_project/software/46e65782",
+      "/xyz/openbmc_project/software/493a00ad"
+    ]
+  },
+  "message": "200 OK",
+  "status": "ok"
+}
+```
+
+2. An "active" association to the active BMC and host images
+
+Note: Several BMC images might be active, this is true for the host images
+as well.
+
+```
+curl -c cjar -b cjar -k -H "Content-Type: application/json" -X GET \
+    https://${bmc}/xyz/openbmc_project/software/active
+{
+  "data": {
+    "endpoints": [
+      "/xyz/openbmc_project/software/46e65782",
+      "/xyz/openbmc_project/software/493a00ad",
+      "/xyz/openbmc_project/software/88c153b1"
+    ]
+  },
+  "message": "200 OK",
+  "status": "ok"
+}
+```
+
+An additional association is located at `/xyz/openbmc_project/software/<id>/inventory`
+for "associating" a software image with an inventory item.
+
+```
+curl -c cjar -b cjar -k -H "Content-Type: application/json" -X GET \
+   https://${bmc}/xyz/openbmc_project/software/493a00ad/inventory
+{
+  "data": {
+    "endpoints": [
+      "/xyz/openbmc_project/inventory/system/chassis/motherboard/boxelder/bmc"
+    ]
+  },
+  "message": "200 OK",
+  "status": "ok"
+}
+```
+
+To get all software images associated with an inventory item:
+
+```
+curl -c cjar -b cjar -k -H "Content-Type: application/json" -X GET  \
+    https://${bmc}/xyz/openbmc_project/inventory/system/chassis/activation
+{
+  "data": {
+    "endpoints": [
+      "/xyz/openbmc_project/software/46e65782"
+    ]
+  },
+  "message": "200 OK",
+  "status": "ok"
+}
+```
+
 ### Implementation
 
 More information about the implementation of the UBI code update can be found at