diff --git a/IPMITOOL-cheatsheet.md b/IPMITOOL-cheatsheet.md
index c8188d2..3d04b0c 100644
--- a/IPMITOOL-cheatsheet.md
+++ b/IPMITOOL-cheatsheet.md
@@ -8,50 +8,43 @@
 #### 1. View server status
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-status
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power status
 ```
 
 #### 2. Server power on
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-on
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power on
 ```
 
 #### 3. Server power off
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-off
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power off
 ```
 
 #### 4. Server power reset
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-reset
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power reset
 ```
 
 #### 5. Server power cycle
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-cycle
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power cycle
 ```
 
 #### 6. Server power soft
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-soft
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power soft
 ```
 
 #### 7. Send a diagnostic interrupt directly to the processor(not support)
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power
-diag
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" power diag
 ```
 
 ## Users
@@ -59,43 +52,37 @@
 #### 1. View information for all users
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user
-list
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user list
 ```
 
 #### 2. Display a brief summary of BMC users
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user
-summary
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user summary
 ```
 
 #### 3. Create a BMC user with a given name
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user
-set name <userid> <username>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user set name <userid> <username>
 ```
 
 #### 4. Set a given user with a given password
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user
-set password <userid>[<password>]
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user set password <userid>[<password>]
 ```
 
 #### 5. Disable designated users from accessing BMC
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user
-set disable <userid>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user set disable <userid>
 ```
 
 #### 6. Enable the specified user to access BMC
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user
-set enable <userid>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" user set enable <userid>
 ```
 
 ##  Field-replaceable Unit (FRU)
@@ -103,8 +90,7 @@
 #### 1. View FRU information
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" fru
-list
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" fru list
 ```
 
 ## Sensor Data Record (SDR)
@@ -118,15 +104,13 @@
 #### 2. Query related SDR information in BMC
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sdr
-info
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sdr info
 ```
 
 #### 3. View sensor date records
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sdr
-list [all|full|compact|event|mcloc|fru|generic]
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sdr list [all|full|compact|event|mcloc|fru|generic]
 
 ##
 all     : All SDR records (sensors and positioners)
@@ -143,8 +127,7 @@
 #### 1. View sensor information
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sensor
-list
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sensor list
 ```
 
 ## Management Controller (MC)
@@ -152,15 +135,13 @@
 #### 1. Instruct the BMC to perform a cold reset
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" mc
-reset cold
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" mc reset cold
 ```
 
 #### 2. Instruct the BMC to perform a warm reset(not supported)
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" mc
-reset warm
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" mc reset warm
 ```
 
 #### 3. View BMC information
@@ -172,8 +153,7 @@
 #### 4. View the currently available operation options of BMC
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" mc
-getenables
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" mc getenables
 ```
 
 ## Channels
@@ -183,22 +163,19 @@
 #### channel
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" channel
-authcap <channel number> <max privilege>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" channel authcap <channel number> <max privilege>
 ```
 
 #### 2. Display the information for the selected channel
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" channel
-info [<channel number>]
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" channel info [<channel number>]
 ```
 
 #### 3. View channel information
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" channel
-info
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" channel info
 ```
 
 ## Chassis
@@ -207,29 +184,25 @@
 #### power subsystem.
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-status
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis status
 ```
 
 #### 2. The command will return the power on time
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-poh
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis poh
 ```
 
 #### 3. Query the reason for the last system restart.(not supported)
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-restart_cause
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis restart_cause
 ```
 
 #### 4. Set rack power strategy in case of power failure
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-policy <state>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis policy <state>
 
 ##
 list        : return supported policies
@@ -241,8 +214,7 @@
 #### 5. View and change power status
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-power
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis power
 
 ##
 status : show current status
@@ -256,8 +228,7 @@
 #### 6. Set boot device for next system restart
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-bootdev <device>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis bootdev <device>
 ```
 
 ##
@@ -278,8 +249,7 @@
 
 If you want to make your override persistent over reboots use the `persistent` option:
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-bootdev <device> options=persistent
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis bootdev <device> options=persistent
 ```
 
 ##
@@ -288,29 +258,25 @@
 the legacy/EFI mode selector. By default IPMI overrides boot source with the legacy
 mode enabled. To set EFI mode use `efiboot` option:
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-bootdev <device> options=efiboot
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis bootdev <device> options=efiboot
 ```
 
 You can combine options with a help of `,`:
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-bootdev <device> options=persistent,efiboot
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis bootdev <device> options=persistent,efiboot
 ```
 
 ##
 
 To read current boot source override setting:
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-bootparam get 5
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis bootparam get 5
 ```
 
 #### 7. Control panel logo light
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis
-identify <interval>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" chassis identify <interval>
 ```
 
 ## Local Area Network(LAN)
@@ -318,15 +284,13 @@
 #### 1. Output the current configuration information of a given channel
 
 ```
- $ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" lan
-print [<channel number>]
+ $ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" lan print [<channel number>]
 ```
 
 #### 2. Set the given parameters for the given channel
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" lan set
-<channel> <command> <parameter>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" lan set <channel> <command> <parameter>
 ##
 Valid parameter
 ipaddr <x.x.x.x>                 : Set ip for this channel
@@ -345,29 +309,25 @@
 #### 1. Query the relevant information about SEL and its content in BMC
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel
-info
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel info
 ```
 
 #### 2. Clear the information in SEL,but it cannot be undone.
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel
-clear
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel clear
 ```
 
 #### 3. Delete a single event
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel
-delete <number>
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel delete <number>
 ```
 
 #### 4. Display the current time of the SEL clock
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel
-time get
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sel time get
 ```
 
 ## Session
@@ -375,8 +335,7 @@
 #### 1. Display session information
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" session
-info
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" session info
 ```
 
 ## Serial Over Lan (SOL)
@@ -385,21 +344,17 @@
 #### channel.
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sol
-info [<channel number>]
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sol info [<channel number>]
 ```
 
 #### 2. Put ipmitool into Serial Over LAN mode
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sol
-activate
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sol activate
 ```
 
 #### 3. Disable serial LAN in BMC mode
 
 ```
-$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sol
-deactivate
+$ ipmitool -C 17 -H "$BMC_IP" -I lanplus -U "$BMC_USER" -P "$BMC_PASSWD" sol deactivate
 ```
-