diff --git a/designs/target-fail-monitoring.md b/designs/target-fail-monitoring.md
new file mode 100644
index 0000000..d73de9e
--- /dev/null
+++ b/designs/target-fail-monitoring.md
@@ -0,0 +1,141 @@
+# Monitoring and Logging OpenBMC Systemd Target Failures
+
+Author: Andrew Geissler
+  < geissonator >
+
+  Primary assignee: Andrew Geissler
+
+  Created: June 18, 2019
+
+## Problem Description
+
+OpenBMC uses systemd to coordinate the starting and stopping of its
+applications. For example, systemd is used to start all of OpenBMC's initial
+services, to power on and off the servers it manages, and to perform operations
+like firmware updates.
+
+[openbmc-systemd.md][1] has a good summary of systemd and the basics of how
+it is used within OpenBMC.
+
+There are situations where OpenBMC systemd targets fail. They fail due to a
+target or service within them hitting some sort of error condition. In some
+cases, the service which caused the failure will log an error to
+phosphor-logging but in some situations (segfault, unhandled exception,
+unhandled error path, ...), there will be no indication to the end user that
+something failed. It is critical that if a systemd target fails within OpenBMC,
+the user be notified.
+
+## Background and References
+
+See the [phosphor-state-manager][2] repository for background information on
+state management and systemd within OpenBMC.
+
+systemd provides signals when targets complete and provides status on that
+completed target. See the JobNew()/JobRemoved() section in the [systemd dbus
+API][3]. The six different results are:
+```
+done, canceled, timeout, failed, dependency, skipped
+```
+
+phosphor-state-manager code already monitors for these signals but only looks
+for a status of `done` to know when to mark the corresponding dbus object
+as ready(bmc)/on(chassis)/running(host).
+
+The proposal within this document is to monitor for these other results and
+log an appropriate error to phosphor-logging.
+
+## Requirements
+
+- Must be able to monitor any arbitrary systemd target and log a defined error
+  based on the type of failure the target encountered
+- Must be configurable
+  - Target: Choose any systemd target
+  - Status: Choose one or more status's to monitor for
+  - Error to log: Specify error to log when error is detected
+- Must be able to take multiple configure files as input on startup
+- Support a `default` for errors to monitor for
+  - This will be `timeout`,`failed`, and `dependency`
+- Error will always be the configured one with additional data indicating the
+  status that failed (i.e. canceled, timeout, ...)
+  - Example:
+```
+    xyz.openbmc_project.State.BMC.Error.MultiUserTargetFailure
+    STATUS=timeout
+```
+- By default, enable this monitor and logging service for all critical OpenBMC
+  targets
+  - Critical systemd targets are ones used by phosphor-state-manager
+    - BMC: multi-user.target
+    - Chassis: obmc-chassis-poweron@0.target, obmc-chassis-poweroff@0.target
+    - Host: obmc-host-start@0.target, obmc-host-startmin@0.target,
+      obmc-host-shutdown@0.target, obmc-host-stop@0.target,
+      obmc-host-reboot@0.target
+  - The errors for these must be defined in phosphor-dbus-interfaces
+- Limitations:
+    - Fully qualified target name must be input (i.e. no templated / wild card
+      target support)
+
+## Proposed Design
+
+Create a new standalone application in phosphor-state-manager which will load
+json file(s) on startup. The json file(s) would have the following format:
+```
+{
+    "targets" : [
+        {
+            "name": "multi-user.target",
+            "errorsToMonitor": ["default"],
+            "errorToLog": "xyz.openbmc_project.State.BMC.Error.MultiUserTargetFailure",
+        },
+        {
+            "name": "obmc-chassis-poweron@0.target",
+            "errorsToMonitor": ["timeout", "failed"],
+            "errorToLog": "xyz.openbmc_project.State.Chassis.Error.PowerOnTargetFailure",
+        }
+      ]
+}
+```
+
+On startup, all input json files will be loaded and monitoring will be setup.
+
+This application will not register any interfaces on D-Bus but will subscribe
+to systemd dbus signals for JobRemoved. sdeventplus will be used for all
+D-Bus communication.
+
+For additional debug, the errors may be registered with the BMC Dump function to
+ensure the cause of the failure can be determined. This requires the errors
+logged by this service be put into `phosphor-debug-errors/errors_watch.yaml`.
+
+## Alternatives Considered
+
+Targets have an OnError directive. Could put the error logging logic within that
+path but it introduces more complexity to OpenBMC systemd usage which is already
+quite complicated.
+
+Could implement this within the existing state manager applications since they
+are already monitoring some of these targets. The standalone application and
+generic capability to monitor any target was chosen as a better option.
+
+## Impacts
+
+A phosphor-logging event will be logged when one of the targets listed above
+fails. This will be viewable by owners of the system. There may be situations
+where two logs are generated for the same issue. For example, if the power
+application detects an issue during power on and logs it to phosphor-logging and
+then returns non zero to systemd, the target that service is a part of will also
+fail and the code logic defined in this design will also log an error.
+
+The thought is that two errors are better than none. Also, there is a plugin
+architecture being defined for phosphor-logging. The user could monitor for
+that first error within the phosphor-logging plugin architecture and as a
+defined action, cancel the systemd target. A target status of `canceled` will
+not result in phosphor-state-manager generating an error.
+
+## Testing
+Need to cause all targets mentioned within this design to fail. They should fail
+for each of the reasons defined within this design and the error generated for
+each scenario should be verified.
+
+[1]: https://github.com/openbmc/docs/blob/master/openbmc-systemd.md
+[2]: https://github.com/openbmc/phosphor-state-manager
+[3]: https://www.freedesktop.org/wiki/Software/systemd/dbus/