Remove rfc-obmc-service-iface.md
rfc-obmc-service-iface.md has been in the deprecated dir for months.
Nothing in the document is currently relevant.
Change-Id: I4bcac688cd990bc6d392a740ed84c3384125791f
Signed-off-by: Gunnar Mills <gmills@us.ibm.com>
diff --git a/deprecated/rfc-obmc-service-iface.md b/deprecated/rfc-obmc-service-iface.md
deleted file mode 100644
index 2a3da33..0000000
--- a/deprecated/rfc-obmc-service-iface.md
+++ /dev/null
@@ -1,145 +0,0 @@
-# Request for Comments: OBMC Service Interface
-Various services provided by OBMC will have the need to expose methods to
-configure, enable, disable and start, stop, reset the service. It is hence
-desirable for a generic interface which has the above methods in its namespace.
-
-Each of the service will then implement one or more methods of this interface
-as applicable. If Enable and Start are semantically equivalent to the service,
-then only one of them may be implemented. Similar is the case with the Disable
-and Stop methods.
-
-## org.obmc.Service Interface
-
-### Methods
-```
- <interface name="org.openbmc.Service">
- <method name="Enable">
- <arg direction="in" type="a{sv}" name="argv_dict" />
- <arg direction="out" type="x" />
- </method>
- <method name="Disable">
- <arg direction="in" type="as" name="argv_list" />
- <arg direction="out" type="x" />
- </method>
- <method name="Reset">
- <arg direction="in" type="" name="" />
- <arg direction="out" type="x" />
- </method>
- <method name="Start">
- <arg direction="in" type="" name="" />
- <arg direction="out" type="x" />
- </method>
- <method name="Stop">
- <arg direction="in" type="" name="" />
- <arg direction="out" type="x" />
- </method>
- </interface>
-```
-
-### Description
-#### Enable method
-```
-Enable (IN a{sv} argv_dict,
- OUT x return_code);
-```
-Configure and Enable the service. Parameters for configuration of the service
-are provided as a dictionary / map.
-
-+ IN a{av} argv_dict: Each dictionary entry is a name variant pair
-corresponding to the name of the property and the value respectively.
-+ OUT x return_value : 0 on Success, else Failure.
-
-An empty dictionary may be passed to re-enable a service post a disable operation.
-
-### Disable method
-```
-Disable (IN as argv_list,
- OUT x return_code);
-```
-UnConfigure and Disable the service. Parameters for (un)configuration of the
-service are provided as a list.
-
-+ IN as argv_list: Each list item is a string corresponding to the name of the
-property to be disabled.
-+ OUT x return_value : 0 on Success, else Failure.
-An empty list may be passed to disable ALL the parameters of the service.
-
-### Reset method
-```
-Reset (OUT x return_code);
-```
-Reset all the configurable properties of the service to the distribution
-specific default.
-
-+ OUT x return_value : 0 on Success, else Failure.
-
-
-### Start method
-```
-Start (OUT x return_code);
-```
-Start the service.
-
-+ OUT x return_value : 0 on Success, else Failure.
-
-### Stop method
-```
-Stop (OUT x return_code);
-```
-Stop the service.
-
-+ OUT x return_value : 0 on Success, else Failure.
-
-
-### Examples
-A journal/syslog management service (org.openbmc.LogManager) is considered as
-an example for the purpose of illustration. org.openbmc.Logmanager implements
-the following interfaces:
-```
-org.freedesktop.DBus.Properties
-org.openbmc.Service
-org.openbmc.Errl
-```
-The log management service can be configured with the IP address and port
-number of the remote syslog server. When Configured with the above properties
-and Enabled, journal logs will be streamed as syslog entries to the remote
-syslog server. When disabled, journal as well as syslog will be logged on the
-locally. When Enabled again, the previous configuration will be restored and
-streaming of logs will resume.
-
-Start/Stop/Reset are not implemented by this service.
-
-#### Configure the IP address and Port number for the remote logging service
-and Enable it.
-```
-busctl call org.openbmc.LogManager /org/openbmc/LogManager org.openbmc.Service Enable a{sv} 2 ipaddr s 9.109.116.67 port u 514
-```
-#### Disable the remote logging service.
-
-```
-busctl call org.openbmc.LogManager /org/openbmc/LogManager/rsyslog org.openbmc.Service Disable as 0
-```
-
-#### Restore previous configuration and Enable the remote logging service.
-```
-busctl call org.openbmc.LogManager /org/openbmc/LogManager/rsyslog org.openbmc.Service Enable a{sv} 0
-```
-
-#### Get the IP address configured as the remote syslog server.
-```
-busctl call org.openbmc.LogManager /org/openbmc/LogManager/rsyslog org.freedesktop.DBus.Properties Get ss org.openbmc.Errl ipaddr
-```
-
-#### Get the Port number configured as the remote syslog server.
-```
-busctl call org.openbmc.LogManager /org/openbmc/LogManager/rsyslog org.freedesktop.DBus.Properties Get ss org.openbmc.Errl port
-```
-
-#### Get All configuration properties of the logging service.
-```
-busctl call org.openbmc.LogManager /org/openbmc/LogManager/rsyslog org.freedesktop.DBus.Properties GetAll s org.openbmc.Errl
-```
----
-Signed-off-by: Hari R. <iamrhari@gmail.com>
----
----