diff --git a/designs/power-recovery.md b/designs/power-recovery.md
new file mode 100644
index 0000000..71119a5
--- /dev/null
+++ b/designs/power-recovery.md
@@ -0,0 +1,100 @@
+____
+# OpenBMC Server Power Recovery
+
+Author: Andrew Geissler (geissonator)
+
+Primary assignee: Andrew Geissler (geissonator)
+
+Other contributors:
+
+Created: October 11th, 2021
+
+## Problem Description
+Modern computer systems have a feature, automated power-on recovery, which
+in essence is the ability to tell your system what to do when it hits
+issues with power to the system. If the system had a black out (i.e. power
+was completely cut to the system), should it automatically power the system
+on? Should it leave it off? Or maybe the user would like the system to
+go to whichever state it was at before the power loss.
+
+The goal of this design document is to describe how OpenBMC firmware will
+deal with these questions.
+
+## Background and References
+The BMC already implements a limited subset of function in this area.
+The [PowerRestorePolicy][pdi-restore] property out in phosphor-dbus-interface
+defines the function capability.
+
+In smaller servers, this feature is commonly found within the Advanced
+Configuration and Power Interface (ACPI).
+
+[openbmc/phosphor-state-manager][state-mgr] supports this property as defined
+in the phosphor-dbus-interface.
+
+Future updates to this document will touch on more complex scenarios like
+brown outs (chassis power loss but BMC remains on), handling of external
+uninterrupted power devices (UPS), and enhanced tracking of the different types
+of errors that can occur in this area on systems.
+
+## Requirements
+OpenBMC software must ensure it persists the state of power to the chassis so
+it can know what to restore it to if necessary
+
+OpenBMC software must provide support for the following options:
+- Do nothing when power is lost to the system (this will be the
+  default)
+- Always power the system on and boot the host
+- Always power the system off (previous power was on, power is now off, run
+  all chassis power off services to ensure a clean state of software and
+  hardware)
+- Restore the previous state of the chassis power and host
+
+These options are only checked and enforced in situations where the BMC does
+not detect that chassis power is already on to the system when it comes out
+of reboot.
+
+OpenBMC software must also support the concept of a one_time power restore
+policy. This is a separate instance of the `PowerRestorePolicy` which will
+be hosted under a D-Bus object path which ends with "one_time". If this
+one_time setting is not the default, `None`, then software will execute
+the policy defined under it, and then reset the one_time property to `None`.
+This one_time feature is a way for software to utilize automated power-on
+recovery function for other areas like firmware update scenarios where a
+certain power on behavior is desired once an update has completed.
+
+## Proposed Design
+An application will be run after the chassis and host states have been
+determined which will only run if the chassis power is not on.
+
+This application will look for the one_time setting and use it if its value
+is not `None`. If it does use the one_time setting then it will reset it
+to `None` once it has read it. Otherwise the application will read the
+persistent value of the `PowerRestorePolicy`. The application will then
+run the logic as defined in the Requirements above.
+
+This function will be hosted in phosphor-state-manger and potentially
+x86-power-control.
+
+## Alternatives Considered
+None, this is a pretty basic feature that does not have a lot of alternatives
+(other then just not doing it).
+
+## Impacts
+None
+
+## Testing
+The control of this policy can already bet set via the Redfish API.
+```
+#  Power Restore Policy
+curl -k -X PATCH -d '{"PowerRestorePolicy":"AlwaysOn"}' https://${bmc}/redfish/v1/Systems/system
+curl -k -X PATCH -d '{"PowerRestorePolicy":"AlwaysOff"}' https://${bmc}/redfish/v1/Systems/system
+curl -k -X PATCH -d '{"PowerRestorePolicy":"LastState"}' https://${bmc}/redfish/v1/Systems/system
+```
+For testing, each policy should be set and verified. The one_time aspect should
+also be checked for each possible value and verified to only be used once.
+
+Validate that when multiple black outs occur, the firmware continues to try
+and power on the system when policy is `AlwaysOn` or `Restore`.
+
+[pdi-restore]:https://github.com/openbmc/phosphor-dbus-interfaces/blob/master/yaml/xyz/openbmc_project/Control/Power/RestorePolicy.interface.yaml
+[state-mgr]: https://github.com/openbmc/phosphor-state-manager