Move components from proving-ground
Move all needed components from proving ground to this
repo. Some clean up was done in json files to fix probes
as well as some slight modification to readme.
Change-Id: I05b7f6459704640c4850420a4573d157500d0aff
Signed-off-by: James Feist <james.feist@linux.intel.com>
diff --git a/include/Utils.hpp b/include/Utils.hpp
new file mode 100644
index 0000000..d991f0d
--- /dev/null
+++ b/include/Utils.hpp
@@ -0,0 +1,23 @@
+/*
+// Copyright (c) 2017 Intel Corporation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+*/
+
+#pragma once
+#include <experimental/filesystem>
+
+bool find_files(const std::experimental::filesystem::path &dir_path,
+ const std::string &match_string,
+ std::vector<std::experimental::filesystem::path> &found_paths,
+ unsigned int symlink_depth = 1);
diff --git a/include/VariantVisitors.hpp b/include/VariantVisitors.hpp
new file mode 100644
index 0000000..41997a6
--- /dev/null
+++ b/include/VariantVisitors.hpp
@@ -0,0 +1,60 @@
+/*
+// Copyright (c) 2018 Intel Corporation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+*/
+
+#pragma once
+#include <boost/variant.hpp>
+
+struct VariantToFloatVisitor : public boost::static_visitor<float>
+{
+ template <typename T> float operator()(const T &t) const
+ {
+ return static_cast<float>(t);
+ }
+};
+template <>
+inline float VariantToFloatVisitor::
+operator()<std::string>(const std::string &s) const
+{
+ throw std::invalid_argument("Cannot translate string to float");
+}
+
+struct VariantToIntVisitor : public boost::static_visitor<int>
+{
+ template <typename T> int operator()(const T &t) const
+ {
+ return static_cast<int>(t);
+ }
+};
+template <>
+inline int VariantToIntVisitor::
+operator()<std::string>(const std::string &s) const
+{
+ throw std::invalid_argument("Cannot translate string to int");
+}
+
+struct VariantToUnsignedIntVisitor : public boost::static_visitor<unsigned int>
+{
+ template <typename T> unsigned int operator()(const T &t) const
+ {
+ return static_cast<int>(t);
+ }
+};
+template <>
+inline unsigned int VariantToUnsignedIntVisitor::
+operator()<std::string>(const std::string &s) const
+{
+ throw std::invalid_argument("Cannot translate string to unsigned int");
+}
diff --git a/include/non-yocto/i2c-dev-user.h b/include/non-yocto/i2c-dev-user.h
new file mode 100644
index 0000000..dc4632b
--- /dev/null
+++ b/include/non-yocto/i2c-dev-user.h
@@ -0,0 +1,336 @@
+/*
+ i2c-dev.h - i2c-bus driver, char device interface
+
+ Copyright (C) 1995-97 Simon G. Vogl
+ Copyright (C) 1998-99 Frodo Looijaard <frodol@dds.nl>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ MA 02110-1301 USA.
+*/
+
+/* $Id: i2c-dev.h 5894 2010-12-12 13:22:29Z khali $ */
+
+#ifndef LIB_I2CDEV_H
+#define LIB_I2CDEV_H
+
+#include <linux/types.h>
+#include <sys/ioctl.h>
+#include <stddef.h>
+
+
+/* -- i2c.h -- */
+
+
+/*
+ * I2C Message - used for pure i2c transaction, also from /dev interface
+ */
+struct i2c_msg {
+ __u16 addr; /* slave address */
+ unsigned short flags;
+#define I2C_M_TEN 0x10 /* we have a ten bit chip address */
+#define I2C_M_RD 0x01
+#define I2C_M_NOSTART 0x4000
+#define I2C_M_REV_DIR_ADDR 0x2000
+#define I2C_M_IGNORE_NAK 0x1000
+#define I2C_M_NO_RD_ACK 0x0800
+ short len; /* msg length */
+ char *buf; /* pointer to msg data */
+};
+
+/* To determine what functionality is present */
+
+#define I2C_FUNC_I2C 0x00000001
+#define I2C_FUNC_10BIT_ADDR 0x00000002
+#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
+#define I2C_FUNC_SMBUS_PEC 0x00000008
+#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
+#define I2C_FUNC_SMBUS_QUICK 0x00010000
+#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
+#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
+#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
+#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
+#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
+#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
+#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
+#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
+#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
+#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
+#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
+
+#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
+ I2C_FUNC_SMBUS_WRITE_BYTE)
+#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
+#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \
+ I2C_FUNC_SMBUS_WRITE_WORD_DATA)
+#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
+ I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
+#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
+ I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
+
+/* Old name, for compatibility */
+#define I2C_FUNC_SMBUS_HWPEC_CALC I2C_FUNC_SMBUS_PEC
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX 32 /* As specified in SMBus standard */
+#define I2C_SMBUS_I2C_BLOCK_MAX 32 /* Not specified but we use same structure */
+union i2c_smbus_data {
+ __u8 byte;
+ __u16 word;
+ __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+ /* and one more for PEC */
+};
+
+/* smbus_access read or write markers */
+#define I2C_SMBUS_READ 1
+#define I2C_SMBUS_WRITE 0
+
+/* SMBus transaction types (size parameter in the above functions)
+ Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK 0
+#define I2C_SMBUS_BYTE 1
+#define I2C_SMBUS_BYTE_DATA 2
+#define I2C_SMBUS_WORD_DATA 3
+#define I2C_SMBUS_PROC_CALL 4
+#define I2C_SMBUS_BLOCK_DATA 5
+#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
+#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA 8
+
+
+/* ----- commands for the ioctl like i2c_command call:
+ * note that additional calls are defined in the algorithm and hw
+ * dependent layers - these can be listed here, or see the
+ * corresponding header files.
+ */
+ /* -> bit-adapter specific ioctls */
+#define I2C_RETRIES 0x0701 /* number of times a device address */
+ /* should be polled when not */
+ /* acknowledging */
+#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
+
+
+/* this is for i2c-dev.c */
+#define I2C_SLAVE 0x0703 /* Change slave address */
+ /* Attn.: Slave address is 7 or 10 bits */
+#define I2C_SLAVE_FORCE 0x0706 /* Change slave address */
+ /* Attn.: Slave address is 7 or 10 bits */
+ /* This changes the address, even if it */
+ /* is already taken! */
+#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
+
+#define I2C_FUNCS 0x0705 /* Get the adapter functionality */
+#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/
+#define I2C_PEC 0x0708 /* != 0 for SMBus PEC */
+
+#define I2C_SMBUS 0x0720 /* SMBus-level access */
+
+/* -- i2c.h -- */
+
+
+/* Note: 10-bit addresses are NOT supported! */
+
+/* This is the structure as used in the I2C_SMBUS ioctl call */
+struct i2c_smbus_ioctl_data {
+ char read_write;
+ __u8 command;
+ int size;
+ union i2c_smbus_data *data;
+};
+
+/* This is the structure as used in the I2C_RDWR ioctl call */
+struct i2c_rdwr_ioctl_data {
+ struct i2c_msg *msgs; /* pointers to i2c_msgs */
+ int nmsgs; /* number of i2c_msgs */
+};
+
+
+static inline __s32 i2c_smbus_access(int file, char read_write, __u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct i2c_smbus_ioctl_data args;
+
+ args.read_write = read_write;
+ args.command = command;
+ args.size = size;
+ args.data = data;
+ return ioctl(file,I2C_SMBUS,&args);
+}
+
+
+static inline __s32 i2c_smbus_write_quick(int file, __u8 value)
+{
+ return i2c_smbus_access(file,value,0,I2C_SMBUS_QUICK,NULL);
+}
+
+static inline __s32 i2c_smbus_read_byte(int file)
+{
+ union i2c_smbus_data data;
+ if (i2c_smbus_access(file,I2C_SMBUS_READ,0,I2C_SMBUS_BYTE,&data))
+ return -1;
+ else
+ return 0x0FF & data.byte;
+}
+
+static inline __s32 i2c_smbus_write_byte(int file, __u8 value)
+{
+ return i2c_smbus_access(file,I2C_SMBUS_WRITE,value,
+ I2C_SMBUS_BYTE,NULL);
+}
+
+static inline __s32 i2c_smbus_read_byte_data(int file, __u8 command)
+{
+ union i2c_smbus_data data;
+ if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+ I2C_SMBUS_BYTE_DATA,&data))
+ return -1;
+ else
+ return 0x0FF & data.byte;
+}
+
+static inline __s32 i2c_smbus_write_byte_data(int file, __u8 command,
+ __u8 value)
+{
+ union i2c_smbus_data data;
+ data.byte = value;
+ return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+ I2C_SMBUS_BYTE_DATA, &data);
+}
+
+static inline __s32 i2c_smbus_read_word_data(int file, __u8 command)
+{
+ union i2c_smbus_data data;
+ if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+ I2C_SMBUS_WORD_DATA,&data))
+ return -1;
+ else
+ return 0x0FFFF & data.word;
+}
+
+static inline __s32 i2c_smbus_write_word_data(int file, __u8 command,
+ __u16 value)
+{
+ union i2c_smbus_data data;
+ data.word = value;
+ return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+ I2C_SMBUS_WORD_DATA, &data);
+}
+
+static inline __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value)
+{
+ union i2c_smbus_data data;
+ data.word = value;
+ if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+ I2C_SMBUS_PROC_CALL,&data))
+ return -1;
+ else
+ return 0x0FFFF & data.word;
+}
+
+
+/* Returns the number of read bytes */
+static inline __s32 i2c_smbus_read_block_data(int file, __u8 command,
+ __u8 *values)
+{
+ union i2c_smbus_data data;
+ int i;
+ if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+ I2C_SMBUS_BLOCK_DATA,&data))
+ return -1;
+ else {
+ for (i = 1; i <= data.block[0]; i++)
+ values[i-1] = data.block[i];
+ return data.block[0];
+ }
+}
+
+static inline __s32 i2c_smbus_write_block_data(int file, __u8 command,
+ __u8 length, const __u8 *values)
+{
+ union i2c_smbus_data data;
+ int i;
+ if (length > 32)
+ length = 32;
+ for (i = 1; i <= length; i++)
+ data.block[i] = values[i-1];
+ data.block[0] = length;
+ return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+ I2C_SMBUS_BLOCK_DATA, &data);
+}
+
+/* Returns the number of read bytes */
+/* Until kernel 2.6.22, the length is hardcoded to 32 bytes. If you
+ ask for less than 32 bytes, your code will only work with kernels
+ 2.6.23 and later. */
+static inline __s32 i2c_smbus_read_i2c_block_data(int file, __u8 command,
+ __u8 length, __u8 *values)
+{
+ union i2c_smbus_data data;
+ int i;
+
+ if (length > 32)
+ length = 32;
+ data.block[0] = length;
+ if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
+ length == 32 ? I2C_SMBUS_I2C_BLOCK_BROKEN :
+ I2C_SMBUS_I2C_BLOCK_DATA,&data))
+ return -1;
+ else {
+ for (i = 1; i <= data.block[0]; i++)
+ values[i-1] = data.block[i];
+ return data.block[0];
+ }
+}
+
+static inline __s32 i2c_smbus_write_i2c_block_data(int file, __u8 command,
+ __u8 length,
+ const __u8 *values)
+{
+ union i2c_smbus_data data;
+ int i;
+ if (length > 32)
+ length = 32;
+ for (i = 1; i <= length; i++)
+ data.block[i] = values[i-1];
+ data.block[0] = length;
+ return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+ I2C_SMBUS_I2C_BLOCK_BROKEN, &data);
+}
+
+/* Returns the number of read bytes */
+static inline __s32 i2c_smbus_block_process_call(int file, __u8 command,
+ __u8 length, __u8 *values)
+{
+ union i2c_smbus_data data;
+ int i;
+ if (length > 32)
+ length = 32;
+ for (i = 1; i <= length; i++)
+ data.block[i] = values[i-1];
+ data.block[0] = length;
+ if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
+ I2C_SMBUS_BLOCK_PROC_CALL,&data))
+ return -1;
+ else {
+ for (i = 1; i <= data.block[0]; i++)
+ values[i-1] = data.block[i];
+ return data.block[0];
+ }
+}
+
+
+#endif /* LIB_I2CDEV_H */