configurations: add catalina_hdd_nvme config
Add Catalina HDD board NVMe configuration for temperature sensors
monitoring.
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Change-Id: Ia9343f33d302e9357e5b9f1876b72a49f34e05a5
diff --git a/configurations/catalina_hdd_nvme.json b/configurations/catalina_hdd_nvme.json
new file mode 100644
index 0000000..0163282
--- /dev/null
+++ b/configurations/catalina_hdd_nvme.json
@@ -0,0 +1,92 @@
+{
+ "Exposes": [
+ {
+ "Address": "0x6a",
+ "Bus": "48",
+ "Name": "HDDBOARD_SSD0_TEMP_C",
+ "PowerState": "On",
+ "Thresholds": [
+ {
+ "Direction": "greater than",
+ "Name": "upper critical",
+ "Severity": 1,
+ "Value": 70
+ },
+ {
+ "Direction": "less than",
+ "Name": "lower critical",
+ "Severity": 1,
+ "Value": 5
+ }
+ ],
+ "Type": "NVME1000"
+ },
+ {
+ "Address": "0x6a",
+ "Bus": "49",
+ "Name": "HDDBOARD_SSD1_TEMP_C",
+ "PowerState": "On",
+ "Thresholds": [
+ {
+ "Direction": "greater than",
+ "Name": "upper critical",
+ "Severity": 1,
+ "Value": 70
+ },
+ {
+ "Direction": "less than",
+ "Name": "lower critical",
+ "Severity": 1,
+ "Value": 5
+ }
+ ],
+ "Type": "NVME1000"
+ },
+ {
+ "Address": "0x6a",
+ "Bus": "50",
+ "Name": "HDDBOARD_SSD2_TEMP_C",
+ "PowerState": "On",
+ "Thresholds": [
+ {
+ "Direction": "greater than",
+ "Name": "upper critical",
+ "Severity": 1,
+ "Value": 70
+ },
+ {
+ "Direction": "less than",
+ "Name": "lower critical",
+ "Severity": 1,
+ "Value": 5
+ }
+ ],
+ "Type": "NVME1000"
+ },
+ {
+ "Address": "0x6a",
+ "Bus": "51",
+ "Name": "HDDBOARD_SSD3_TEMP_C",
+ "PowerState": "On",
+ "Thresholds": [
+ {
+ "Direction": "greater than",
+ "Name": "upper critical",
+ "Severity": 1,
+ "Value": 70
+ },
+ {
+ "Direction": "less than",
+ "Name": "lower critical",
+ "Severity": 1,
+ "Value": 5
+ }
+ ],
+ "Type": "NVME1000"
+ }
+ ],
+ "Name": "Catalina HDD NVMe",
+ "Probe": "FOUND('Catalina HDD Carrier')",
+ "Type": "Board",
+ "xyz.openbmc_project.Inventory.Item.Chassis": {}
+}