diff --git a/configurations/ASPOWER_U1A-D10550_PSU.json b/configurations/ASPOWER_U1A-D10550_PSU.json
new file mode 100644
index 0000000..423373d
--- /dev/null
+++ b/configurations/ASPOWER_U1A-D10550_PSU.json
@@ -0,0 +1,153 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU $ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU $ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "vin",
+                    "vout1",
+                    "iin",
+                    "iout1",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 600
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 540
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 52
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 46
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 50
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 55
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "ASPOWER 550W PSU $ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'U1A-D10550-DRB'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/configurations/ASPOWER_U1A-D10800_PSU.json b/configurations/ASPOWER_U1A-D10800_PSU.json
new file mode 100644
index 0000000..2146dea
--- /dev/null
+++ b/configurations/ASPOWER_U1A-D10800_PSU.json
@@ -0,0 +1,153 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU $ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU $ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "vin",
+                    "vout1",
+                    "iin",
+                    "iout1",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 780
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 850
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 73
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 67
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 75
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 80
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "ASPOWER 800W PSU $ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'U1A-D10800-DRB'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/configurations/ASPOWER_U1A-D11200_PSU.json b/configurations/ASPOWER_U1A-D11200_PSU.json
new file mode 100644
index 0000000..60aacb5
--- /dev/null
+++ b/configurations/ASPOWER_U1A-D11200_PSU.json
@@ -0,0 +1,153 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU $ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU $ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "vin",
+                    "vout1",
+                    "iin",
+                    "iout1",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 1250
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 1150
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 125
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 105
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 63
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 60
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "ASPOWER 1200W PSU $ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'U1A-D11200-DRB'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/configurations/ASPOWER_U1A-D11600_PSU.json b/configurations/ASPOWER_U1A-D11600_PSU.json
new file mode 100644
index 0000000..e089dc5
--- /dev/null
+++ b/configurations/ASPOWER_U1A-D11600_PSU.json
@@ -0,0 +1,152 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU $ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU $ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "vin",
+                    "iin",
+                    "iout1",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 1700
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 1500
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 155
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 135
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 65
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 62
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "ASPOWER 1600W PSU $ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'U1A-D11600-DRB'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/configurations/ASPOWER_U1D-D10800_PSU.json b/configurations/ASPOWER_U1D-D10800_PSU.json
new file mode 100644
index 0000000..164ca57
--- /dev/null
+++ b/configurations/ASPOWER_U1D-D10800_PSU.json
@@ -0,0 +1,152 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU $ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU $ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "vin",
+                    "iin",
+                    "iout1",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 1516.5
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 1364.8
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 125
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 100
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 65
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 62
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "ASPOWER 800W VDC PSU $ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'U1D-D10800-DRB'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/configurations/Delta_DPS-1600AB_PSU.json b/configurations/Delta_DPS-1600AB_PSU.json
new file mode 100644
index 0000000..b1e07d9
--- /dev/null
+++ b/configurations/Delta_DPS-1600AB_PSU.json
@@ -0,0 +1,156 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU$ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "pout2",
+                    "vin",
+                    "vout1",
+                    "vout2",
+                    "iin",
+                    "iout1",
+                    "iout2",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 1700
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 1600
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 155
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 135
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 65
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 55
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "Delta DPS-1600AB PSU$ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'DPS-1600AB-13 Z'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/configurations/Delta_DPS-2000AB_PSU.json b/configurations/Delta_DPS-2000AB_PSU.json
new file mode 100644
index 0000000..cc5c25a
--- /dev/null
+++ b/configurations/Delta_DPS-2000AB_PSU.json
@@ -0,0 +1,156 @@
+[
+    {
+        "Exposes": [
+            {
+                "Address": "$address",
+                "Bus": "$bus",
+                "Name": "PSU$ADDRESS % 4 + 1 FRU",
+                "Type": "EEPROM"
+            },
+            {
+                "Class": "fan",
+                "FFGainCoefficient": 1.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": 0.0,
+                "ILimitMax": 0.0,
+                "ILimitMin": 0.0,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Fan Speed 1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Fan 1",
+                "NegativeHysteresis": 2.0,
+                "OutLimitMax": 100.0,
+                "OutLimitMin": 30.0,
+                "Outputs": [
+                    "Pwm PSU$ADDRESS % 4 + 1 Fan 1"
+                ],
+                "PCoefficient": 0.0,
+                "PositiveHysteresis": 0.0,
+                "SlewNeg": 0.0,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "temp",
+                "FFGainCoefficient": 0.0,
+                "FFOffCoefficient": 0.0,
+                "ICoefficient": -4.64,
+                "ILimitMax": 100,
+                "ILimitMin": 30,
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 Temperature",
+                "NegativeHysteresis": 5.0,
+                "OutLimitMax": 100,
+                "OutLimitMin": 30,
+                "Outputs": [],
+                "PCoefficient": -0.15,
+                "PositiveHysteresis": 0.0,
+                "SetPoint": 50.0,
+                "SlewNeg": -1,
+                "SlewPos": 0.0,
+                "Type": "Pid",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Class": "Floor",
+                "Inputs": [
+                    "PSU$ADDRESS % 4 + 1 Temperature"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1 LCC",
+                "NegativeHysteresis": 2,
+                "Output": [
+                    40.0,
+                    100.0
+                ],
+                "PositiveHysteresis": 0,
+                "Reading": [
+                    30.0,
+                    65.0
+                ],
+                "Type": "Stepwise",
+                "Zones": [
+                    "PSU"
+                ]
+            },
+            {
+                "Address": "$ADDRESS % 4 + 88",
+                "Bus": "$bus",
+                "Labels": [
+                    "pin",
+                    "pout1",
+                    "pout2",
+                    "vin",
+                    "vout1",
+                    "vout2",
+                    "iin",
+                    "iout1",
+                    "iout2",
+                    "temp1",
+                    "fan1"
+                ],
+                "Name": "PSU$ADDRESS % 4 + 1",
+                "Thresholds": [
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 2200
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "pin",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 2000
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 200
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "iout1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 170
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper critical",
+                        "Severity": 1,
+                        "Value": 65
+                    },
+                    {
+                        "Direction": "greater than",
+                        "Label": "temp1",
+                        "Name": "upper non critical",
+                        "Severity": 0,
+                        "Value": 55
+                    }
+                ],
+                "Type": "pmbus"
+            }
+        ],
+        "Name": "Delta DPS-2000AB PSU$ADDRESS % 4 + 1",
+        "Probe": "xyz.openbmc_project.FruDevice({'PRODUCT_PRODUCT_NAME': 'DPS-2000AB-2 E'})",
+        "Type": "PowerSupply",
+        "xyz.openbmc_project.Inventory.Decorator.Asset": {
+            "Manufacturer": "$PRODUCT_MANUFACTURER",
+            "Model": "$PRODUCT_PRODUCT_NAME",
+            "PartNumber": "$PRODUCT_PART_NUMBER",
+            "SerialNumber": "$PRODUCT_SERIAL_NUMBER"
+        }
+    }
+]
diff --git a/meson.build b/meson.build
index 3f4826e..2f97202 100644
--- a/meson.build
+++ b/meson.build
@@ -73,10 +73,17 @@
     'A2UL16RISER.json',
     'A2UX8X4RISER.json',
     'AHW1UM2RISER.json',
+    'ASPOWER_U1A-D10550_PSU.json',
+    'ASPOWER_U1A-D10800_PSU.json',
+    'ASPOWER_U1A-D11200_PSU.json',
+    'ASPOWER_U1A-D11600_PSU.json',
+    'ASPOWER_U1D-D10800_PSU.json',
     'AXX1P100HSSI_AIC.json',
     'AXX2PRTHDHD.json',
     'BNP Baseboard.json',
     'Delta DPS-750XB PSU.json',
+    'Delta_DPS-1600AB_PSU.json',
+    'Delta_DPS-2000AB_PSU.json',
     'F1U12X25 HSBP.json',
     'F1U4X25 HSBP.json',
     'F2U12X35 HSBP.json',