diff --git a/src/fru_device.cpp b/src/fru_device.cpp
new file mode 100644
index 0000000..af53e7f
--- /dev/null
+++ b/src/fru_device.cpp
@@ -0,0 +1,1477 @@
+/*
+// Copyright (c) 2018 Intel Corporation
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+*/
+/// \file fru_device.cpp
+
+#include "fru_utils.hpp"
+#include "utils.hpp"
+
+#include <fcntl.h>
+#include <sys/inotify.h>
+#include <sys/ioctl.h>
+
+#include <boost/algorithm/string/predicate.hpp>
+#include <boost/asio/deadline_timer.hpp>
+#include <boost/asio/io_service.hpp>
+#include <boost/container/flat_map.hpp>
+#include <nlohmann/json.hpp>
+#include <sdbusplus/asio/connection.hpp>
+#include <sdbusplus/asio/object_server.hpp>
+
+#include <array>
+#include <cerrno>
+#include <chrono>
+#include <ctime>
+#include <filesystem>
+#include <fstream>
+#include <functional>
+#include <future>
+#include <iomanip>
+#include <iostream>
+#include <limits>
+#include <map>
+#include <regex>
+#include <set>
+#include <sstream>
+#include <string>
+#include <thread>
+#include <utility>
+#include <variant>
+#include <vector>
+
+extern "C"
+{
+#include <i2c/smbus.h>
+#include <linux/i2c-dev.h>
+}
+
+namespace fs = std::filesystem;
+static constexpr bool debug = false;
+constexpr size_t maxFruSize = 512;
+constexpr size_t maxEepromPageIndex = 255;
+constexpr size_t busTimeoutSeconds = 5;
+
+constexpr const char* blacklistPath = PACKAGE_DIR "blacklist.json";
+
+const static constexpr char* baseboardFruLocation =
+    "/etc/fru/baseboard.fru.bin";
+
+const static constexpr char* i2CDevLocation = "/dev";
+
+static std::set<size_t> busBlacklist;
+struct FindDevicesWithCallback;
+
+static boost::container::flat_map<
+    std::pair<size_t, size_t>, std::shared_ptr<sdbusplus::asio::dbus_interface>>
+    foundDevices;
+
+static boost::container::flat_map<size_t, std::set<size_t>> failedAddresses;
+
+boost::asio::io_service io;
+
+uint8_t calculateChecksum(std::vector<uint8_t>::const_iterator iter,
+                          std::vector<uint8_t>::const_iterator end);
+bool updateFRUProperty(
+    const std::string& assetTag, uint32_t bus, uint32_t address,
+    const std::string& propertyName,
+    boost::container::flat_map<
+        std::pair<size_t, size_t>,
+        std::shared_ptr<sdbusplus::asio::dbus_interface>>& dbusInterfaceMap,
+    size_t& unknownBusObjectCount, const bool& powerIsOn,
+    sdbusplus::asio::object_server& objServer,
+    std::shared_ptr<sdbusplus::asio::connection>& systemBus);
+
+// Given a bus/address, produce the path in sysfs for an eeprom.
+static std::string getEepromPath(size_t bus, size_t address)
+{
+    std::stringstream output;
+    output << "/sys/bus/i2c/devices/" << bus << "-" << std::right
+           << std::setfill('0') << std::setw(4) << std::hex << address
+           << "/eeprom";
+    return output.str();
+}
+
+static bool hasEepromFile(size_t bus, size_t address)
+{
+    auto path = getEepromPath(bus, address);
+    try
+    {
+        return fs::exists(path);
+    }
+    catch (...)
+    {
+        return false;
+    }
+}
+
+static ssize_t readFromEeprom(int flag __attribute__((unused)), int fd,
+                              uint16_t address __attribute__((unused)),
+                              off_t offset, size_t len, uint8_t* buf)
+{
+    auto result = lseek(fd, offset, SEEK_SET);
+    if (result < 0)
+    {
+        std::cerr << "failed to seek\n";
+        return -1;
+    }
+
+    return read(fd, buf, len);
+}
+
+static int busStrToInt(const std::string& busName)
+{
+    auto findBus = busName.rfind('-');
+    if (findBus == std::string::npos)
+    {
+        return -1;
+    }
+    return std::stoi(busName.substr(findBus + 1));
+}
+
+static int getRootBus(size_t bus)
+{
+    auto ec = std::error_code();
+    auto path = std::filesystem::read_symlink(
+        std::filesystem::path("/sys/bus/i2c/devices/i2c-" +
+                              std::to_string(bus) + "/mux_device"),
+        ec);
+    if (ec)
+    {
+        return -1;
+    }
+
+    std::string filename = path.filename();
+    auto findBus = filename.find('-');
+    if (findBus == std::string::npos)
+    {
+        return -1;
+    }
+    return std::stoi(filename.substr(0, findBus));
+}
+
+static bool isMuxBus(size_t bus)
+{
+    return is_symlink(std::filesystem::path(
+        "/sys/bus/i2c/devices/i2c-" + std::to_string(bus) + "/mux_device"));
+}
+
+static void makeProbeInterface(size_t bus, size_t address,
+                               sdbusplus::asio::object_server& objServer)
+{
+    if (isMuxBus(bus))
+    {
+        return; // the mux buses are random, no need to publish
+    }
+    auto [it, success] = foundDevices.emplace(
+        std::make_pair(bus, address),
+        objServer.add_interface(
+            "/xyz/openbmc_project/FruDevice/" + std::to_string(bus) + "_" +
+                std::to_string(address),
+            "xyz.openbmc_project.Inventory.Item.I2CDevice"));
+    if (!success)
+    {
+        return; // already added
+    }
+    it->second->register_property("Bus", bus);
+    it->second->register_property("Address", address);
+    it->second->initialize();
+}
+
+static int isDevice16Bit(int file)
+{
+    // Set the higher data word address bits to 0. It's safe on 8-bit addressing
+    // EEPROMs because it doesn't write any actual data.
+    int ret = i2c_smbus_write_byte(file, 0);
+    if (ret < 0)
+    {
+        return ret;
+    }
+
+    /* Get first byte */
+    int byte1 = i2c_smbus_read_byte_data(file, 0);
+    if (byte1 < 0)
+    {
+        return byte1;
+    }
+    /* Read 7 more bytes, it will read same first byte in case of
+     * 8 bit but it will read next byte in case of 16 bit
+     */
+    for (int i = 0; i < 7; i++)
+    {
+        int byte2 = i2c_smbus_read_byte_data(file, 0);
+        if (byte2 < 0)
+        {
+            return byte2;
+        }
+        if (byte2 != byte1)
+        {
+            return 1;
+        }
+    }
+    return 0;
+}
+
+// Issue an I2C transaction to first write to_slave_buf_len bytes,then read
+// from_slave_buf_len bytes.
+static int i2cSmbusWriteThenRead(int file, uint16_t address,
+                                 uint8_t* toSlaveBuf, uint8_t toSlaveBufLen,
+                                 uint8_t* fromSlaveBuf, uint8_t fromSlaveBufLen)
+{
+    if (toSlaveBuf == nullptr || toSlaveBufLen == 0 ||
+        fromSlaveBuf == nullptr || fromSlaveBufLen == 0)
+    {
+        return -1;
+    }
+
+#define SMBUS_IOCTL_WRITE_THEN_READ_MSG_COUNT 2
+    struct i2c_msg msgs[SMBUS_IOCTL_WRITE_THEN_READ_MSG_COUNT];
+    struct i2c_rdwr_ioctl_data rdwr;
+
+    msgs[0].addr = address;
+    msgs[0].flags = 0;
+    msgs[0].len = toSlaveBufLen;
+    msgs[0].buf = toSlaveBuf;
+    msgs[1].addr = address;
+    msgs[1].flags = I2C_M_RD;
+    msgs[1].len = fromSlaveBufLen;
+    msgs[1].buf = fromSlaveBuf;
+
+    rdwr.msgs = msgs;
+    rdwr.nmsgs = SMBUS_IOCTL_WRITE_THEN_READ_MSG_COUNT;
+
+    int ret = ioctl(file, I2C_RDWR, &rdwr);
+
+    return (ret == SMBUS_IOCTL_WRITE_THEN_READ_MSG_COUNT) ? msgs[1].len : -1;
+}
+
+static ssize_t readBlockData(int flag, int file, uint16_t address, off_t offset,
+                             size_t len, uint8_t* buf)
+{
+    if (flag == 0)
+    {
+        return i2c_smbus_read_i2c_block_data(file, static_cast<uint8_t>(offset),
+                                             len, buf);
+    }
+
+    offset = htobe16(offset);
+    return i2cSmbusWriteThenRead(
+        file, address, reinterpret_cast<uint8_t*>(&offset), 2, buf, len);
+}
+
+// TODO: This code is very similar to the non-eeprom version and can be merged
+// with some tweaks.
+static std::vector<uint8_t> processEeprom(int bus, int address)
+{
+    auto path = getEepromPath(bus, address);
+
+    int file = open(path.c_str(), O_RDONLY);
+    if (file < 0)
+    {
+        std::cerr << "Unable to open eeprom file: " << path << "\n";
+        return {};
+    }
+
+    std::string errorMessage = "eeprom at " + std::to_string(bus) +
+                               " address " + std::to_string(address);
+    std::vector<uint8_t> device = readFRUContents(
+        0, file, static_cast<uint16_t>(address), readFromEeprom, errorMessage);
+
+    close(file);
+    return device;
+}
+
+std::set<int> findI2CEeproms(int i2cBus,
+                             const std::shared_ptr<DeviceMap>& devices)
+{
+    std::set<int> foundList;
+
+    std::string path = "/sys/bus/i2c/devices/i2c-" + std::to_string(i2cBus);
+
+    // For each file listed under the i2c device
+    // NOTE: This should be faster than just checking for each possible address
+    // path.
+    for (const auto& p : fs::directory_iterator(path))
+    {
+        const std::string node = p.path().string();
+        std::smatch m;
+        bool found =
+            std::regex_match(node, m, std::regex(".+\\d+-([0-9abcdef]+$)"));
+
+        if (!found)
+        {
+            continue;
+        }
+        if (m.size() != 2)
+        {
+            std::cerr << "regex didn't capture\n";
+            continue;
+        }
+
+        std::ssub_match subMatch = m[1];
+        std::string addressString = subMatch.str();
+
+        std::size_t ignored;
+        const int hexBase = 16;
+        int address = std::stoi(addressString, &ignored, hexBase);
+
+        const std::string eeprom = node + "/eeprom";
+
+        try
+        {
+            if (!fs::exists(eeprom))
+            {
+                continue;
+            }
+        }
+        catch (...)
+        {
+            continue;
+        }
+
+        // There is an eeprom file at this address, it may have invalid
+        // contents, but we found it.
+        foundList.insert(address);
+
+        std::vector<uint8_t> device = processEeprom(i2cBus, address);
+        if (!device.empty())
+        {
+            devices->emplace(address, device);
+        }
+    }
+
+    return foundList;
+}
+
+int getBusFRUs(int file, int first, int last, int bus,
+               std::shared_ptr<DeviceMap> devices, const bool& powerIsOn,
+               sdbusplus::asio::object_server& objServer)
+{
+
+    std::future<int> future = std::async(std::launch::async, [&]() {
+        // NOTE: When reading the devices raw on the bus, it can interfere with
+        // the driver's ability to operate, therefore read eeproms first before
+        // scanning for devices without drivers. Several experiments were run
+        // and it was determined that if there were any devices on the bus
+        // before the eeprom was hit and read, the eeprom driver wouldn't open
+        // while the bus device was open. An experiment was not performed to see
+        // if this issue was resolved if the i2c bus device was closed, but
+        // hexdumps of the eeprom later were successful.
+
+        // Scan for i2c eeproms loaded on this bus.
+        std::set<int> skipList = findI2CEeproms(bus, devices);
+        std::set<size_t>& failedItems = failedAddresses[bus];
+
+        std::set<size_t>* rootFailures = nullptr;
+        int rootBus = getRootBus(bus);
+
+        if (rootBus >= 0)
+        {
+            rootFailures = &(failedAddresses[rootBus]);
+        }
+
+        constexpr int startSkipSlaveAddr = 0;
+        constexpr int endSkipSlaveAddr = 12;
+
+        for (int ii = first; ii <= last; ii++)
+        {
+            if (skipList.find(ii) != skipList.end())
+            {
+                continue;
+            }
+            // skipping since no device is present in this range
+            if (ii >= startSkipSlaveAddr && ii <= endSkipSlaveAddr)
+            {
+                continue;
+            }
+            // Set slave address
+            if (ioctl(file, I2C_SLAVE, ii) < 0)
+            {
+                std::cerr << "device at bus " << bus << " address " << ii
+                          << " busy\n";
+                continue;
+            }
+            // probe
+            if (i2c_smbus_read_byte(file) < 0)
+            {
+                continue;
+            }
+
+            if (debug)
+            {
+                std::cout << "something at bus " << bus << " addr " << ii
+                          << "\n";
+            }
+
+            makeProbeInterface(bus, ii, objServer);
+
+            if (failedItems.find(ii) != failedItems.end())
+            {
+                // if we failed to read it once, unlikely we can read it later
+                continue;
+            }
+
+            if (rootFailures != nullptr)
+            {
+                if (rootFailures->find(ii) != rootFailures->end())
+                {
+                    continue;
+                }
+            }
+
+            /* Check for Device type if it is 8 bit or 16 bit */
+            int flag = isDevice16Bit(file);
+            if (flag < 0)
+            {
+                std::cerr << "failed to read bus " << bus << " address " << ii
+                          << "\n";
+                if (powerIsOn)
+                {
+                    failedItems.insert(ii);
+                }
+                continue;
+            }
+
+            std::string errorMessage =
+                "bus " + std::to_string(bus) + " address " + std::to_string(ii);
+            std::vector<uint8_t> device =
+                readFRUContents(flag, file, static_cast<uint16_t>(ii),
+                                readBlockData, errorMessage);
+            if (device.empty())
+            {
+                continue;
+            }
+
+            devices->emplace(ii, device);
+        }
+        return 1;
+    });
+    std::future_status status =
+        future.wait_for(std::chrono::seconds(busTimeoutSeconds));
+    if (status == std::future_status::timeout)
+    {
+        std::cerr << "Error reading bus " << bus << "\n";
+        if (powerIsOn)
+        {
+            busBlacklist.insert(bus);
+        }
+        close(file);
+        return -1;
+    }
+
+    close(file);
+    return future.get();
+}
+
+void loadBlacklist(const char* path)
+{
+    std::ifstream blacklistStream(path);
+    if (!blacklistStream.good())
+    {
+        // File is optional.
+        std::cerr << "Cannot open blacklist file.\n\n";
+        return;
+    }
+
+    nlohmann::json data =
+        nlohmann::json::parse(blacklistStream, nullptr, false);
+    if (data.is_discarded())
+    {
+        std::cerr << "Illegal blacklist file detected, cannot validate JSON, "
+                     "exiting\n";
+        std::exit(EXIT_FAILURE);
+    }
+
+    // It's expected to have at least one field, "buses" that is an array of the
+    // buses by integer. Allow for future options to exclude further aspects,
+    // such as specific addresses or ranges.
+    if (data.type() != nlohmann::json::value_t::object)
+    {
+        std::cerr << "Illegal blacklist, expected to read dictionary\n";
+        std::exit(EXIT_FAILURE);
+    }
+
+    // If buses field is missing, that's fine.
+    if (data.count("buses") == 1)
+    {
+        // Parse the buses array after a little validation.
+        auto buses = data.at("buses");
+        if (buses.type() != nlohmann::json::value_t::array)
+        {
+            // Buses field present but invalid, therefore this is an error.
+            std::cerr << "Invalid contents for blacklist buses field\n";
+            std::exit(EXIT_FAILURE);
+        }
+
+        // Catch exception here for type mis-match.
+        try
+        {
+            for (const auto& bus : buses)
+            {
+                busBlacklist.insert(bus.get<size_t>());
+            }
+        }
+        catch (const nlohmann::detail::type_error& e)
+        {
+            // Type mis-match is a critical error.
+            std::cerr << "Invalid bus type: " << e.what() << "\n";
+            std::exit(EXIT_FAILURE);
+        }
+    }
+
+    return;
+}
+
+static void findI2CDevices(const std::vector<fs::path>& i2cBuses,
+                           BusMap& busmap, const bool& powerIsOn,
+                           sdbusplus::asio::object_server& objServer)
+{
+    for (auto& i2cBus : i2cBuses)
+    {
+        int bus = busStrToInt(i2cBus);
+
+        if (bus < 0)
+        {
+            std::cerr << "Cannot translate " << i2cBus << " to int\n";
+            continue;
+        }
+        if (busBlacklist.find(bus) != busBlacklist.end())
+        {
+            continue; // skip previously failed busses
+        }
+
+        int rootBus = getRootBus(bus);
+        if (busBlacklist.find(rootBus) != busBlacklist.end())
+        {
+            continue;
+        }
+
+        auto file = open(i2cBus.c_str(), O_RDWR);
+        if (file < 0)
+        {
+            std::cerr << "unable to open i2c device " << i2cBus.string()
+                      << "\n";
+            continue;
+        }
+        unsigned long funcs = 0;
+
+        if (ioctl(file, I2C_FUNCS, &funcs) < 0)
+        {
+            std::cerr
+                << "Error: Could not get the adapter functionality matrix bus "
+                << bus << "\n";
+            close(file);
+            continue;
+        }
+        if (!(funcs & I2C_FUNC_SMBUS_READ_BYTE) ||
+            !(I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+        {
+            std::cerr << "Error: Can't use SMBus Receive Byte command bus "
+                      << bus << "\n";
+            continue;
+        }
+        auto& device = busmap[bus];
+        device = std::make_shared<DeviceMap>();
+
+        //  i2cdetect by default uses the range 0x03 to 0x77, as
+        //  this is  what we have tested with, use this range. Could be
+        //  changed in future.
+        if (debug)
+        {
+            std::cerr << "Scanning bus " << bus << "\n";
+        }
+
+        // fd is closed in this function in case the bus locks up
+        getBusFRUs(file, 0x03, 0x77, bus, device, powerIsOn, objServer);
+
+        if (debug)
+        {
+            std::cerr << "Done scanning bus " << bus << "\n";
+        }
+    }
+}
+
+// this class allows an async response after all i2c devices are discovered
+struct FindDevicesWithCallback :
+    std::enable_shared_from_this<FindDevicesWithCallback>
+{
+    FindDevicesWithCallback(const std::vector<fs::path>& i2cBuses,
+                            BusMap& busmap, const bool& powerIsOn,
+                            sdbusplus::asio::object_server& objServer,
+                            std::function<void(void)>&& callback) :
+        _i2cBuses(i2cBuses),
+        _busMap(busmap), _powerIsOn(powerIsOn), _objServer(objServer),
+        _callback(std::move(callback))
+    {}
+    ~FindDevicesWithCallback()
+    {
+        _callback();
+    }
+    void run()
+    {
+        findI2CDevices(_i2cBuses, _busMap, _powerIsOn, _objServer);
+    }
+
+    const std::vector<fs::path>& _i2cBuses;
+    BusMap& _busMap;
+    const bool& _powerIsOn;
+    sdbusplus::asio::object_server& _objServer;
+    std::function<void(void)> _callback;
+};
+
+void addFruObjectToDbus(
+    std::vector<uint8_t>& device,
+    boost::container::flat_map<
+        std::pair<size_t, size_t>,
+        std::shared_ptr<sdbusplus::asio::dbus_interface>>& dbusInterfaceMap,
+    uint32_t bus, uint32_t address, size_t& unknownBusObjectCount,
+    const bool& powerIsOn, sdbusplus::asio::object_server& objServer,
+    std::shared_ptr<sdbusplus::asio::connection>& systemBus)
+{
+    boost::container::flat_map<std::string, std::string> formattedFRU;
+    resCodes res = formatIPMIFRU(device, formattedFRU);
+    if (res == resCodes::resErr)
+    {
+        std::cerr << "failed to parse FRU for device at bus " << bus
+                  << " address " << address << "\n";
+        return;
+    }
+    if (res == resCodes::resWarn)
+    {
+        std::cerr << "there were warnings while parsing FRU for device at bus "
+                  << bus << " address " << address << "\n";
+    }
+
+    auto productNameFind = formattedFRU.find("BOARD_PRODUCT_NAME");
+    std::string productName;
+    // Not found under Board section or an empty string.
+    if (productNameFind == formattedFRU.end() ||
+        productNameFind->second.empty())
+    {
+        productNameFind = formattedFRU.find("PRODUCT_PRODUCT_NAME");
+    }
+    // Found under Product section and not an empty string.
+    if (productNameFind != formattedFRU.end() &&
+        !productNameFind->second.empty())
+    {
+        productName = productNameFind->second;
+        std::regex illegalObject("[^A-Za-z0-9_]");
+        productName = std::regex_replace(productName, illegalObject, "_");
+    }
+    else
+    {
+        productName = "UNKNOWN" + std::to_string(unknownBusObjectCount);
+        unknownBusObjectCount++;
+    }
+
+    productName = "/xyz/openbmc_project/FruDevice/" + productName;
+    // avoid duplicates by checking to see if on a mux
+    if (bus > 0)
+    {
+        int highest = -1;
+        bool found = false;
+
+        for (auto const& busIface : dbusInterfaceMap)
+        {
+            std::string path = busIface.second->get_object_path();
+            if (std::regex_match(path, std::regex(productName + "(_\\d+|)$")))
+            {
+                if (isMuxBus(bus) && bus != busIface.first.first &&
+                    address == busIface.first.second &&
+                    (getFRUInfo(static_cast<uint8_t>(busIface.first.first),
+                                static_cast<uint8_t>(busIface.first.second)) ==
+                     getFRUInfo(static_cast<uint8_t>(bus),
+                                static_cast<uint8_t>(address))))
+                {
+                    // This device is already added to the lower numbered bus,
+                    // do not replicate it.
+                    return;
+                }
+
+                // Check if the match named has extra information.
+                found = true;
+                std::smatch baseMatch;
+
+                bool match = std::regex_match(
+                    path, baseMatch, std::regex(productName + "_(\\d+)$"));
+                if (match)
+                {
+                    if (baseMatch.size() == 2)
+                    {
+                        std::ssub_match baseSubMatch = baseMatch[1];
+                        std::string base = baseSubMatch.str();
+
+                        int value = std::stoi(base);
+                        highest = (value > highest) ? value : highest;
+                    }
+                }
+            }
+        } // end searching objects
+
+        if (found)
+        {
+            // We found something with the same name.  If highest was still -1,
+            // it means this new entry will be _0.
+            productName += "_";
+            productName += std::to_string(++highest);
+        }
+    }
+
+    std::shared_ptr<sdbusplus::asio::dbus_interface> iface =
+        objServer.add_interface(productName, "xyz.openbmc_project.FruDevice");
+    dbusInterfaceMap[std::pair<size_t, size_t>(bus, address)] = iface;
+
+    for (auto& property : formattedFRU)
+    {
+
+        std::regex_replace(property.second.begin(), property.second.begin(),
+                           property.second.end(), nonAsciiRegex, "_");
+        if (property.second.empty() && property.first != "PRODUCT_ASSET_TAG")
+        {
+            continue;
+        }
+        std::string key =
+            std::regex_replace(property.first, nonAsciiRegex, "_");
+
+        if (property.first == "PRODUCT_ASSET_TAG")
+        {
+            std::string propertyName = property.first;
+            iface->register_property(
+                key, property.second + '\0',
+                [bus, address, propertyName, &dbusInterfaceMap,
+                 &unknownBusObjectCount, &powerIsOn, &objServer,
+                 &systemBus](const std::string& req, std::string& resp) {
+                    if (strcmp(req.c_str(), resp.c_str()) != 0)
+                    {
+                        // call the method which will update
+                        if (updateFRUProperty(req, bus, address, propertyName,
+                                              dbusInterfaceMap,
+                                              unknownBusObjectCount, powerIsOn,
+                                              objServer, systemBus))
+                        {
+                            resp = req;
+                        }
+                        else
+                        {
+                            throw std::invalid_argument(
+                                "FRU property update failed.");
+                        }
+                    }
+                    return 1;
+                });
+        }
+        else if (!iface->register_property(key, property.second + '\0'))
+        {
+            std::cerr << "illegal key: " << key << "\n";
+        }
+        if (debug)
+        {
+            std::cout << property.first << ": " << property.second << "\n";
+        }
+    }
+
+    // baseboard will be 0, 0
+    iface->register_property("BUS", bus);
+    iface->register_property("ADDRESS", address);
+
+    iface->initialize();
+}
+
+static bool readBaseboardFRU(std::vector<uint8_t>& baseboardFRU)
+{
+    // try to read baseboard fru from file
+    std::ifstream baseboardFRUFile(baseboardFruLocation, std::ios::binary);
+    if (baseboardFRUFile.good())
+    {
+        baseboardFRUFile.seekg(0, std::ios_base::end);
+        size_t fileSize = static_cast<size_t>(baseboardFRUFile.tellg());
+        baseboardFRU.resize(fileSize);
+        baseboardFRUFile.seekg(0, std::ios_base::beg);
+        baseboardFRUFile.read(reinterpret_cast<char*>(baseboardFRU.data()),
+                              fileSize);
+    }
+    else
+    {
+        return false;
+    }
+    return true;
+}
+
+bool writeFRU(uint8_t bus, uint8_t address, const std::vector<uint8_t>& fru)
+{
+    boost::container::flat_map<std::string, std::string> tmp;
+    if (fru.size() > maxFruSize)
+    {
+        std::cerr << "Invalid fru.size() during writeFRU\n";
+        return false;
+    }
+    // verify legal fru by running it through fru parsing logic
+    if (formatIPMIFRU(fru, tmp) != resCodes::resOK)
+    {
+        std::cerr << "Invalid fru format during writeFRU\n";
+        return false;
+    }
+    // baseboard fru
+    if (bus == 0 && address == 0)
+    {
+        std::ofstream file(baseboardFruLocation, std::ios_base::binary);
+        if (!file.good())
+        {
+            std::cerr << "Error opening file " << baseboardFruLocation << "\n";
+            throw DBusInternalError();
+            return false;
+        }
+        file.write(reinterpret_cast<const char*>(fru.data()), fru.size());
+        return file.good();
+    }
+
+    if (hasEepromFile(bus, address))
+    {
+        auto path = getEepromPath(bus, address);
+        int eeprom = open(path.c_str(), O_RDWR | O_CLOEXEC);
+        if (eeprom < 0)
+        {
+            std::cerr << "unable to open i2c device " << path << "\n";
+            throw DBusInternalError();
+            return false;
+        }
+
+        ssize_t writtenBytes = write(eeprom, fru.data(), fru.size());
+        if (writtenBytes < 0)
+        {
+            std::cerr << "unable to write to i2c device " << path << "\n";
+            close(eeprom);
+            throw DBusInternalError();
+            return false;
+        }
+
+        close(eeprom);
+        return true;
+    }
+
+    std::string i2cBus = "/dev/i2c-" + std::to_string(bus);
+
+    int file = open(i2cBus.c_str(), O_RDWR | O_CLOEXEC);
+    if (file < 0)
+    {
+        std::cerr << "unable to open i2c device " << i2cBus << "\n";
+        throw DBusInternalError();
+        return false;
+    }
+    if (ioctl(file, I2C_SLAVE_FORCE, address) < 0)
+    {
+        std::cerr << "unable to set device address\n";
+        close(file);
+        throw DBusInternalError();
+        return false;
+    }
+
+    constexpr const size_t retryMax = 2;
+    uint16_t index = 0;
+    size_t retries = retryMax;
+    while (index < fru.size())
+    {
+        if ((index && ((index % (maxEepromPageIndex + 1)) == 0)) &&
+            (retries == retryMax))
+        {
+            // The 4K EEPROM only uses the A2 and A1 device address bits
+            // with the third bit being a memory page address bit.
+            if (ioctl(file, I2C_SLAVE_FORCE, ++address) < 0)
+            {
+                std::cerr << "unable to set device address\n";
+                close(file);
+                throw DBusInternalError();
+                return false;
+            }
+        }
+
+        if (i2c_smbus_write_byte_data(file, static_cast<uint8_t>(index),
+                                      fru[index]) < 0)
+        {
+            if (!retries--)
+            {
+                std::cerr << "error writing fru: " << strerror(errno) << "\n";
+                close(file);
+                throw DBusInternalError();
+                return false;
+            }
+        }
+        else
+        {
+            retries = retryMax;
+            index++;
+        }
+        // most eeproms require 5-10ms between writes
+        std::this_thread::sleep_for(std::chrono::milliseconds(10));
+    }
+    close(file);
+    return true;
+}
+
+void rescanOneBus(
+    BusMap& busmap, uint8_t busNum,
+    boost::container::flat_map<
+        std::pair<size_t, size_t>,
+        std::shared_ptr<sdbusplus::asio::dbus_interface>>& dbusInterfaceMap,
+    bool dbusCall, size_t& unknownBusObjectCount, const bool& powerIsOn,
+    sdbusplus::asio::object_server& objServer,
+    std::shared_ptr<sdbusplus::asio::connection>& systemBus)
+{
+    for (auto& [pair, interface] : foundDevices)
+    {
+        if (pair.first == static_cast<size_t>(busNum))
+        {
+            objServer.remove_interface(interface);
+            foundDevices.erase(pair);
+        }
+    }
+
+    fs::path busPath = fs::path("/dev/i2c-" + std::to_string(busNum));
+    if (!fs::exists(busPath))
+    {
+        if (dbusCall)
+        {
+            std::cerr << "Unable to access i2c bus " << static_cast<int>(busNum)
+                      << "\n";
+            throw std::invalid_argument("Invalid Bus.");
+        }
+        return;
+    }
+
+    std::vector<fs::path> i2cBuses;
+    i2cBuses.emplace_back(busPath);
+
+    auto scan = std::make_shared<FindDevicesWithCallback>(
+        i2cBuses, busmap, powerIsOn, objServer,
+        [busNum, &busmap, &dbusInterfaceMap, &unknownBusObjectCount, &powerIsOn,
+         &objServer, &systemBus]() {
+            for (auto& busIface : dbusInterfaceMap)
+            {
+                if (busIface.first.first == static_cast<size_t>(busNum))
+                {
+                    objServer.remove_interface(busIface.second);
+                }
+            }
+            auto found = busmap.find(busNum);
+            if (found == busmap.end() || found->second == nullptr)
+            {
+                return;
+            }
+            for (auto& device : *(found->second))
+            {
+                addFruObjectToDbus(device.second, dbusInterfaceMap,
+                                   static_cast<uint32_t>(busNum), device.first,
+                                   unknownBusObjectCount, powerIsOn, objServer,
+                                   systemBus);
+            }
+        });
+    scan->run();
+}
+
+void rescanBusses(
+    BusMap& busmap,
+    boost::container::flat_map<
+        std::pair<size_t, size_t>,
+        std::shared_ptr<sdbusplus::asio::dbus_interface>>& dbusInterfaceMap,
+    size_t& unknownBusObjectCount, const bool& powerIsOn,
+    sdbusplus::asio::object_server& objServer,
+    std::shared_ptr<sdbusplus::asio::connection>& systemBus)
+{
+    static boost::asio::deadline_timer timer(io);
+    timer.expires_from_now(boost::posix_time::seconds(1));
+
+    // setup an async wait in case we get flooded with requests
+    timer.async_wait([&](const boost::system::error_code&) {
+        auto devDir = fs::path("/dev/");
+        std::vector<fs::path> i2cBuses;
+
+        boost::container::flat_map<size_t, fs::path> busPaths;
+        if (!getI2cDevicePaths(devDir, busPaths))
+        {
+            std::cerr << "unable to find i2c devices\n";
+            return;
+        }
+
+        for (const auto& busPath : busPaths)
+        {
+            i2cBuses.emplace_back(busPath.second);
+        }
+
+        busmap.clear();
+        for (auto& [pair, interface] : foundDevices)
+        {
+            objServer.remove_interface(interface);
+        }
+        foundDevices.clear();
+
+        auto scan = std::make_shared<FindDevicesWithCallback>(
+            i2cBuses, busmap, powerIsOn, objServer, [&]() {
+                for (auto& busIface : dbusInterfaceMap)
+                {
+                    objServer.remove_interface(busIface.second);
+                }
+
+                dbusInterfaceMap.clear();
+                unknownBusObjectCount = 0;
+
+                // todo, get this from a more sensable place
+                std::vector<uint8_t> baseboardFRU;
+                if (readBaseboardFRU(baseboardFRU))
+                {
+                    // If no device on i2c bus 0, the insertion will happen.
+                    auto bus0 =
+                        busmap.try_emplace(0, std::make_shared<DeviceMap>());
+                    bus0.first->second->emplace(0, baseboardFRU);
+                }
+                for (auto& devicemap : busmap)
+                {
+                    for (auto& device : *devicemap.second)
+                    {
+                        addFruObjectToDbus(device.second, dbusInterfaceMap,
+                                           devicemap.first, device.first,
+                                           unknownBusObjectCount, powerIsOn,
+                                           objServer, systemBus);
+                    }
+                }
+            });
+        scan->run();
+    });
+}
+
+// Details with example of Asset Tag Update
+// To find location of Product Info Area asset tag as per FRU specification
+// 1. Find product Info area starting offset (*8 - as header will be in
+// multiple of 8 bytes).
+// 2. Skip 3 bytes of product info area (like format version, area length,
+// and language code).
+// 3. Traverse manufacturer name, product name, product version, & product
+// serial number, by reading type/length code to reach the Asset Tag.
+// 4. Update the Asset Tag, reposition the product Info area in multiple of
+// 8 bytes. Update the Product area length and checksum.
+
+bool updateFRUProperty(
+    const std::string& updatePropertyReq, uint32_t bus, uint32_t address,
+    const std::string& propertyName,
+    boost::container::flat_map<
+        std::pair<size_t, size_t>,
+        std::shared_ptr<sdbusplus::asio::dbus_interface>>& dbusInterfaceMap,
+    size_t& unknownBusObjectCount, const bool& powerIsOn,
+    sdbusplus::asio::object_server& objServer,
+    std::shared_ptr<sdbusplus::asio::connection>& systemBus)
+{
+    size_t updatePropertyReqLen = updatePropertyReq.length();
+    if (updatePropertyReqLen == 1 || updatePropertyReqLen > 63)
+    {
+        std::cerr
+            << "FRU field data cannot be of 1 char or more than 63 chars. "
+               "Invalid Length "
+            << updatePropertyReqLen << "\n";
+        return false;
+    }
+
+    std::vector<uint8_t> fruData;
+    try
+    {
+        fruData = getFRUInfo(static_cast<uint8_t>(bus),
+                             static_cast<uint8_t>(address));
+    }
+    catch (const std::invalid_argument& e)
+    {
+        std::cerr << "Failure getting FRU Info" << e.what() << "\n";
+        return false;
+    }
+
+    if (fruData.empty())
+    {
+        return false;
+    }
+
+    const std::vector<std::string>* fruAreaFieldNames;
+
+    uint8_t fruAreaOffsetFieldValue = 0;
+    size_t offset = 0;
+    std::string areaName = propertyName.substr(0, propertyName.find('_'));
+    std::string propertyNamePrefix = areaName + "_";
+    auto it = std::find(fruAreaNames.begin(), fruAreaNames.end(), areaName);
+    if (it == fruAreaNames.end())
+    {
+        std::cerr << "Can't parse area name for property " << propertyName
+                  << " \n";
+        return false;
+    }
+    fruAreas fruAreaToUpdate = static_cast<fruAreas>(it - fruAreaNames.begin());
+    fruAreaOffsetFieldValue =
+        fruData[getHeaderAreaFieldOffset(fruAreaToUpdate)];
+    switch (fruAreaToUpdate)
+    {
+        case fruAreas::fruAreaChassis:
+            offset = 3; // chassis part number offset. Skip fixed first 3 bytes
+            fruAreaFieldNames = &chassisFruAreas;
+            break;
+        case fruAreas::fruAreaBoard:
+            offset = 6; // board manufacturer offset. Skip fixed first 6 bytes
+            fruAreaFieldNames = &boardFruAreas;
+            break;
+        case fruAreas::fruAreaProduct:
+            // Manufacturer name offset. Skip fixed first 3 product fru bytes
+            // i.e. version, area length and language code
+            offset = 3;
+            fruAreaFieldNames = &productFruAreas;
+            break;
+        default:
+            std::cerr << "Don't know how to handle property " << propertyName
+                      << " \n";
+            return false;
+    }
+    if (fruAreaOffsetFieldValue == 0)
+    {
+        std::cerr << "FRU Area for " << propertyName << " not present \n";
+        return false;
+    }
+
+    size_t fruAreaStart = fruAreaOffsetFieldValue * fruBlockSize;
+    size_t fruAreaSize = fruData[fruAreaStart + 1] * fruBlockSize;
+    size_t fruAreaEnd = fruAreaStart + fruAreaSize;
+    size_t fruDataIter = fruAreaStart + offset;
+    size_t skipToFRUUpdateField = 0;
+    ssize_t fieldLength;
+
+    bool found = false;
+    for (auto& field : *fruAreaFieldNames)
+    {
+        skipToFRUUpdateField++;
+        if (propertyName == propertyNamePrefix + field)
+        {
+            found = true;
+            break;
+        }
+    }
+    if (!found)
+    {
+        std::size_t pos = propertyName.find(fruCustomFieldName);
+        if (pos == std::string::npos)
+        {
+            std::cerr << "PropertyName doesn't exist in FRU Area Vectors: "
+                      << propertyName << "\n";
+            return false;
+        }
+        std::string fieldNumStr =
+            propertyName.substr(pos + fruCustomFieldName.length());
+        size_t fieldNum = std::stoi(fieldNumStr);
+        if (fieldNum == 0)
+        {
+            std::cerr << "PropertyName not recognized: " << propertyName
+                      << "\n";
+            return false;
+        }
+        skipToFRUUpdateField += fieldNum;
+    }
+
+    for (size_t i = 1; i < skipToFRUUpdateField; i++)
+    {
+        fieldLength = getFieldLength(fruData[fruDataIter]);
+        if (fieldLength < 0)
+        {
+            break;
+        }
+        fruDataIter += 1 + fieldLength;
+    }
+    size_t fruUpdateFieldLoc = fruDataIter;
+
+    // Push post update fru field bytes to a vector
+    fieldLength = getFieldLength(fruData[fruUpdateFieldLoc]);
+    if (fieldLength < 0)
+    {
+        std::cerr << "Property " << propertyName << " not present \n";
+        return false;
+    }
+    fruDataIter += 1 + fieldLength;
+    size_t restFRUFieldsLoc = fruDataIter;
+    size_t endOfFieldsLoc = 0;
+    while ((fieldLength = getFieldLength(fruData[fruDataIter])) >= 0)
+    {
+        if (fruDataIter >= (fruAreaStart + fruAreaSize))
+        {
+            fruDataIter = fruAreaStart + fruAreaSize;
+            break;
+        }
+        fruDataIter += 1 + fieldLength;
+    }
+    endOfFieldsLoc = fruDataIter;
+
+    std::vector<uint8_t> restFRUAreaFieldsData;
+    std::copy_n(fruData.begin() + restFRUFieldsLoc,
+                endOfFieldsLoc - restFRUFieldsLoc + 1,
+                std::back_inserter(restFRUAreaFieldsData));
+
+    // Push post update fru areas if any
+    unsigned int nextFRUAreaLoc = 0;
+    for (fruAreas nextFRUArea = fruAreas::fruAreaInternal;
+         nextFRUArea <= fruAreas::fruAreaMultirecord; ++nextFRUArea)
+    {
+        unsigned int fruAreaLoc =
+            fruData[getHeaderAreaFieldOffset(nextFRUArea)] * fruBlockSize;
+        if ((fruAreaLoc > endOfFieldsLoc) &&
+            ((nextFRUAreaLoc == 0) || (fruAreaLoc < nextFRUAreaLoc)))
+        {
+            nextFRUAreaLoc = fruAreaLoc;
+        }
+    }
+    std::vector<uint8_t> restFRUAreasData;
+    if (nextFRUAreaLoc)
+    {
+        std::copy_n(fruData.begin() + nextFRUAreaLoc,
+                    fruData.size() - nextFRUAreaLoc,
+                    std::back_inserter(restFRUAreasData));
+    }
+
+    // check FRU area size
+    size_t fruAreaDataSize =
+        ((fruUpdateFieldLoc - fruAreaStart + 1) + restFRUAreaFieldsData.size());
+    size_t fruAreaAvailableSize = fruAreaSize - fruAreaDataSize;
+    if ((updatePropertyReqLen + 1) > fruAreaAvailableSize)
+    {
+
+#ifdef ENABLE_FRU_AREA_RESIZE
+        size_t newFRUAreaSize = fruAreaDataSize + updatePropertyReqLen + 1;
+        // round size to 8-byte blocks
+        newFRUAreaSize =
+            ((newFRUAreaSize - 1) / fruBlockSize + 1) * fruBlockSize;
+        size_t newFRUDataSize = fruData.size() + newFRUAreaSize - fruAreaSize;
+        fruData.resize(newFRUDataSize);
+        fruAreaSize = newFRUAreaSize;
+        fruAreaEnd = fruAreaStart + fruAreaSize;
+#else
+        std::cerr << "FRU field length: " << updatePropertyReqLen + 1
+                  << " should not be greater than available FRU area size: "
+                  << fruAreaAvailableSize << "\n";
+        return false;
+#endif // ENABLE_FRU_AREA_RESIZE
+    }
+
+    // write new requested property field length and data
+    constexpr uint8_t newTypeLenMask = 0xC0;
+    fruData[fruUpdateFieldLoc] =
+        static_cast<uint8_t>(updatePropertyReqLen | newTypeLenMask);
+    fruUpdateFieldLoc++;
+    std::copy(updatePropertyReq.begin(), updatePropertyReq.end(),
+              fruData.begin() + fruUpdateFieldLoc);
+
+    // Copy remaining data to main fru area - post updated fru field vector
+    restFRUFieldsLoc = fruUpdateFieldLoc + updatePropertyReqLen;
+    size_t fruAreaDataEnd = restFRUFieldsLoc + restFRUAreaFieldsData.size();
+    std::copy(restFRUAreaFieldsData.begin(), restFRUAreaFieldsData.end(),
+              fruData.begin() + restFRUFieldsLoc);
+
+    // Update final fru with new fru area length and checksum
+    unsigned int nextFRUAreaNewLoc = updateFRUAreaLenAndChecksum(
+        fruData, fruAreaStart, fruAreaDataEnd, fruAreaEnd);
+
+#ifdef ENABLE_FRU_AREA_RESIZE
+    ++nextFRUAreaNewLoc;
+    ssize_t nextFRUAreaOffsetDiff =
+        (nextFRUAreaNewLoc - nextFRUAreaLoc) / fruBlockSize;
+    // Append rest FRU Areas if size changed and there were other sections after
+    // updated one
+    if (nextFRUAreaOffsetDiff && nextFRUAreaLoc)
+    {
+        std::copy(restFRUAreasData.begin(), restFRUAreasData.end(),
+                  fruData.begin() + nextFRUAreaNewLoc);
+        // Update Common Header
+        for (int fruArea = fruAreaInternal; fruArea <= fruAreaMultirecord;
+             fruArea++)
+        {
+            unsigned int fruAreaOffsetField = getHeaderAreaFieldOffset(fruArea);
+            size_t curFRUAreaOffset = fruData[fruAreaOffsetField];
+            if (curFRUAreaOffset > fruAreaOffsetFieldValue)
+            {
+                fruData[fruAreaOffsetField] = static_cast<int8_t>(
+                    curFRUAreaOffset + nextFRUAreaOffsetDiff);
+            }
+        }
+        // Calculate new checksum
+        std::vector<uint8_t> headerFRUData;
+        std::copy_n(fruData.begin(), 7, std::back_inserter(headerFRUData));
+        size_t checksumVal = calculateChecksum(headerFRUData);
+        fruData[7] = static_cast<uint8_t>(checksumVal);
+        // fill zeros if FRU Area size decreased
+        if (nextFRUAreaOffsetDiff < 0)
+        {
+            std::fill(fruData.begin() + nextFRUAreaNewLoc +
+                          restFRUAreasData.size(),
+                      fruData.end(), 0);
+        }
+    }
+#else
+    // this is to avoid "unused variable" warning
+    (void)nextFRUAreaNewLoc;
+#endif // ENABLE_FRU_AREA_RESIZE
+    if (fruData.empty())
+    {
+        return false;
+    }
+
+    if (!writeFRU(static_cast<uint8_t>(bus), static_cast<uint8_t>(address),
+                  fruData))
+    {
+        return false;
+    }
+
+    // Rescan the bus so that GetRawFru dbus-call fetches updated values
+    rescanBusses(busMap, dbusInterfaceMap, unknownBusObjectCount, powerIsOn,
+                 objServer, systemBus);
+    return true;
+}
+
+int main()
+{
+    auto systemBus = std::make_shared<sdbusplus::asio::connection>(io);
+    sdbusplus::asio::object_server objServer(systemBus);
+
+    static size_t unknownBusObjectCount = 0;
+    static bool powerIsOn = false;
+    auto devDir = fs::path("/dev/");
+    auto matchString = std::string(R"(i2c-\d+$)");
+    std::vector<fs::path> i2cBuses;
+
+    if (!findFiles(devDir, matchString, i2cBuses))
+    {
+        std::cerr << "unable to find i2c devices\n";
+        return 1;
+    }
+
+    // check for and load blacklist with initial buses.
+    loadBlacklist(blacklistPath);
+
+    systemBus->request_name("xyz.openbmc_project.FruDevice");
+
+    // this is a map with keys of pair(bus number, address) and values of
+    // the object on dbus
+    boost::container::flat_map<std::pair<size_t, size_t>,
+                               std::shared_ptr<sdbusplus::asio::dbus_interface>>
+        dbusInterfaceMap;
+
+    std::shared_ptr<sdbusplus::asio::dbus_interface> iface =
+        objServer.add_interface("/xyz/openbmc_project/FruDevice",
+                                "xyz.openbmc_project.FruDeviceManager");
+
+    iface->register_method("ReScan", [&]() {
+        rescanBusses(busMap, dbusInterfaceMap, unknownBusObjectCount, powerIsOn,
+                     objServer, systemBus);
+    });
+
+    iface->register_method("ReScanBus", [&](uint8_t bus) {
+        rescanOneBus(busMap, bus, dbusInterfaceMap, true, unknownBusObjectCount,
+                     powerIsOn, objServer, systemBus);
+    });
+
+    iface->register_method("GetRawFru", getFRUInfo);
+
+    iface->register_method("WriteFru", [&](const uint8_t bus,
+                                           const uint8_t address,
+                                           const std::vector<uint8_t>& data) {
+        if (!writeFRU(bus, address, data))
+        {
+            throw std::invalid_argument("Invalid Arguments.");
+            return;
+        }
+        // schedule rescan on success
+        rescanBusses(busMap, dbusInterfaceMap, unknownBusObjectCount, powerIsOn,
+                     objServer, systemBus);
+    });
+    iface->initialize();
+
+    std::function<void(sdbusplus::message::message & message)> eventHandler =
+        [&](sdbusplus::message::message& message) {
+            std::string objectName;
+            boost::container::flat_map<
+                std::string,
+                std::variant<std::string, bool, int64_t, uint64_t, double>>
+                values;
+            message.read(objectName, values);
+            auto findState = values.find("CurrentHostState");
+            if (findState != values.end())
+            {
+                powerIsOn = boost::ends_with(
+                    std::get<std::string>(findState->second), "Running");
+            }
+
+            if (powerIsOn)
+            {
+                rescanBusses(busMap, dbusInterfaceMap, unknownBusObjectCount,
+                             powerIsOn, objServer, systemBus);
+            }
+        };
+
+    sdbusplus::bus::match::match powerMatch = sdbusplus::bus::match::match(
+        static_cast<sdbusplus::bus::bus&>(*systemBus),
+        "type='signal',interface='org.freedesktop.DBus.Properties',path='/xyz/"
+        "openbmc_project/state/"
+        "host0',arg0='xyz.openbmc_project.State.Host'",
+        eventHandler);
+
+    int fd = inotify_init();
+    inotify_add_watch(fd, i2CDevLocation, IN_CREATE | IN_MOVED_TO | IN_DELETE);
+    std::array<char, 4096> readBuffer;
+    // monitor for new i2c devices
+    boost::asio::posix::stream_descriptor dirWatch(io, fd);
+    std::function<void(const boost::system::error_code, std::size_t)>
+        watchI2cBusses = [&](const boost::system::error_code& ec,
+                             std::size_t bytesTransferred) {
+            if (ec)
+            {
+                std::cout << "Callback Error " << ec << "\n";
+                return;
+            }
+            size_t index = 0;
+            while ((index + sizeof(inotify_event)) <= bytesTransferred)
+            {
+                const inotify_event* iEvent =
+                    reinterpret_cast<const inotify_event*>(&readBuffer[index]);
+                switch (iEvent->mask)
+                {
+                    case IN_CREATE:
+                    case IN_MOVED_TO:
+                    case IN_DELETE:
+                        std::string name(iEvent->name);
+                        if (boost::starts_with(name, "i2c"))
+                        {
+                            int bus = busStrToInt(name);
+                            if (bus < 0)
+                            {
+                                std::cerr << "Could not parse bus " << name
+                                          << "\n";
+                                continue;
+                            }
+                            rescanOneBus(busMap, static_cast<uint8_t>(bus),
+                                         dbusInterfaceMap, false,
+                                         unknownBusObjectCount, powerIsOn,
+                                         objServer, systemBus);
+                        }
+                }
+                index += sizeof(inotify_event) + iEvent->len;
+            }
+
+            dirWatch.async_read_some(boost::asio::buffer(readBuffer),
+                                     watchI2cBusses);
+        };
+
+    dirWatch.async_read_some(boost::asio::buffer(readBuffer), watchI2cBusses);
+    // run the initial scan
+    rescanBusses(busMap, dbusInterfaceMap, unknownBusObjectCount, powerIsOn,
+                 objServer, systemBus);
+
+    io.run();
+    return 0;
+}