/*
 * Copyright (c)  2018 Intel Corporation.
 * Copyright (c)  2018-present Facebook.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "xyz/openbmc_project/Common/error.hpp"
#include <xyz/openbmc_project/Control/Boot/Mode/server.hpp>
#include <xyz/openbmc_project/Control/Boot/Source/server.hpp>

#include <ipmid/api.hpp>
#include <ipmid/utils.hpp>
#include <commandutils.hpp>
#include <nlohmann/json.hpp>
#include <oemcommands.hpp>
#include <phosphor-logging/log.hpp>
#include <sdbusplus/bus.hpp>

#include <ipmid/api.hpp>
#include <ipmid/api-types.hpp>

#include <array>
#include <cstring>
#include <fstream>
#include <iomanip>
#include <iostream>
#include <sstream>
#include <string>
#include <vector>

#define SIZE_IANA_ID 3

namespace ipmi
{

using namespace phosphor::logging;

static void registerOEMFunctions() __attribute__((constructor));
sdbusplus::bus::bus dbus(ipmid_get_sd_bus_connection()); // from ipmid/api.h
static constexpr size_t maxFRUStringLength = 0x3F;
constexpr uint8_t cmdSetSystemGuid = 0xEF;

int plat_udbg_get_post_desc(uint8_t, uint8_t*, uint8_t, uint8_t*, uint8_t*,
                            uint8_t*);
int plat_udbg_get_gpio_desc(uint8_t, uint8_t*, uint8_t*, uint8_t*, uint8_t*,
                            uint8_t*);
ipmi_ret_t plat_udbg_get_frame_data(uint8_t, uint8_t, uint8_t*, uint8_t*,
                                    uint8_t*);
ipmi_ret_t plat_udbg_control_panel(uint8_t, uint8_t, uint8_t, uint8_t*,
                                   uint8_t*);
int sendMeCmd(uint8_t, uint8_t, std::vector<uint8_t>&, std::vector<uint8_t>&);

int sendBicCmd(uint8_t, uint8_t, uint8_t, std::vector<uint8_t>&,
               std::vector<uint8_t>&);

nlohmann::json oemData __attribute__((init_priority(101)));

static constexpr size_t GUID_SIZE = 16;
// TODO Make offset and location runtime configurable to ensure we
// can make each define their own locations.
static constexpr off_t OFFSET_SYS_GUID = 0x17F0;
static constexpr const char* FRU_EEPROM = "/sys/bus/i2c/devices/6-0054/eeprom";

enum class LanParam : uint8_t
{
    INPROGRESS = 0,
    AUTHSUPPORT = 1,
    AUTHENABLES = 2,
    IP = 3,
    IPSRC = 4,
    MAC = 5,
    SUBNET = 6,
    GATEWAY = 12,
    VLAN = 20,
    CIPHER_SUITE_COUNT = 22,
    CIPHER_SUITE_ENTRIES = 23,
    IPV6 = 59,
};

namespace network
{

constexpr auto ROOT = "/xyz/openbmc_project/network";
constexpr auto SERVICE = "xyz.openbmc_project.Network";
constexpr auto IPV4_TYPE = "ipv4";
constexpr auto IPV6_TYPE = "ipv6";
constexpr auto IPV4_PREFIX = "169.254";
constexpr auto IPV6_PREFIX = "fe80";
constexpr auto IP_INTERFACE = "xyz.openbmc_project.Network.IP";
constexpr auto MAC_INTERFACE = "xyz.openbmc_project.Network.MACAddress";

bool isLinkLocalIP(const std::string& address)
{
    return address.find(IPV4_PREFIX) == 0 || address.find(IPV6_PREFIX) == 0;
}

DbusObjectInfo getIPObject(sdbusplus::bus::bus& bus,
                           const std::string& interface,
                           const std::string& serviceRoot,
                           const std::string& match)
{
    auto objectTree = getAllDbusObjects(bus, serviceRoot, interface, match);

    if (objectTree.empty())
    {
        log<level::ERR>("No Object has implemented the IP interface",
                        entry("INTERFACE=%s", interface.c_str()));
    }

    DbusObjectInfo objectInfo;

    for (auto& object : objectTree)
    {
        auto variant =
            ipmi::getDbusProperty(bus, object.second.begin()->first,
                                  object.first, IP_INTERFACE, "Address");

        objectInfo = std::make_pair(object.first, object.second.begin()->first);

        // if LinkLocalIP found look for Non-LinkLocalIP
        if (isLinkLocalIP(std::get<std::string>(variant)))
        {
            continue;
        }
        else
        {
            break;
        }
    }
    return objectInfo;
}

} // namespace network

namespace boot
{

using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server;
using IpmiValue = uint8_t;

std::map<IpmiValue, Source::Sources> sourceIpmiToDbus = {
    {0x0f, Source::Sources::Default},
    {0x00, Source::Sources::RemovableMedia},
    {0x01, Source::Sources::Network},
    {0x02, Source::Sources::Disk},
    {0x03, Source::Sources::ExternalMedia},
    {0x09, Source::Sources::Network}};

std::map<IpmiValue, Mode::Modes> modeIpmiToDbus = {
    {0x06, Mode::Modes::Setup}, {0x00, Mode::Modes::Regular}};

std::map<Source::Sources, IpmiValue> sourceDbusToIpmi = {
    {Source::Sources::Default, 0x0f},
    {Source::Sources::RemovableMedia, 0x00},
    {Source::Sources::Network, 0x01},
    {Source::Sources::Disk, 0x02},
    {Source::Sources::ExternalMedia, 0x03}};

std::map<Mode::Modes, IpmiValue> modeDbusToIpmi = {
    {Mode::Modes::Setup, 0x06}, {Mode::Modes::Regular, 0x00}};

static constexpr auto bootModeIntf = "xyz.openbmc_project.Control.Boot.Mode";
static constexpr auto bootSourceIntf =
    "xyz.openbmc_project.Control.Boot.Source";
static constexpr auto bootSourceProp = "BootSource";
static constexpr auto bootModeProp = "BootMode";

auto instances(std::string s)
{
    std::string delimiter = " ";
    size_t pos = 0;
    std::string token;
    std::vector<std::string> host;

    while ((pos = s.find(delimiter)) != std::string::npos)
    {
        token = s.substr(0, pos);
        host.push_back(token);
        s.erase(0, pos + delimiter.length());
    }
    host.push_back(s);

    return host;
}

std::optional<size_t> findHost(size_t id)
{
    std::string str = INSTANCES;
    size_t hostId;

    if (INSTANCES == "0")
    {
        hostId = id;
    }
    else
    {
        static const auto hosts = instances(str);
        std::string num = std::to_string(id + 1);
        auto instance = std::lower_bound(hosts.begin(), hosts.end(), num);

        if ((instance == hosts.end()) || (*instance != num))
        {
            return std::nullopt;
        }
        hostId = id + 1;
    }

    return hostId;
}

std::tuple<std::string, std::string> objPath(size_t id)
{
    std::string hostName = "host" + std::to_string(id);
    std::string bootObjPath =
        "/xyz/openbmc_project/control/" + hostName + "/boot";
    return std::make_tuple(std::move(bootObjPath), std::move(hostName));
}

} // namespace boot

//----------------------------------------------------------------------
// Helper functions for storing oem data
//----------------------------------------------------------------------

void flushOemData()
{
    std::ofstream file(JSON_OEM_DATA_FILE);
    file << oemData;
    file.close();
    return;
}

std::string bytesToStr(uint8_t* byte, int len)
{
    std::stringstream ss;
    int i;

    ss << std::hex;
    for (i = 0; i < len; i++)
    {
        ss << std::setw(2) << std::setfill('0') << (int)byte[i];
    }

    return ss.str();
}

int strToBytes(std::string& str, uint8_t* data)
{
    std::string sstr;
    int i;

    for (i = 0; i < (str.length()) / 2; i++)
    {
        sstr = str.substr(i * 2, 2);
        data[i] = (uint8_t)std::strtol(sstr.c_str(), NULL, 16);
    }
    return i;
}

ipmi_ret_t getNetworkData(uint8_t lan_param, char* data)
{
    ipmi_ret_t rc = IPMI_CC_OK;
    sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection());

    const std::string ethdevice = "eth0";

    switch (static_cast<LanParam>(lan_param))
    {
        case LanParam::IP:
        {
            auto ethIP = ethdevice + "/" + ipmi::network::IPV4_TYPE;
            std::string ipaddress;
            auto ipObjectInfo = ipmi::network::getIPObject(
                bus, ipmi::network::IP_INTERFACE, ipmi::network::ROOT, ethIP);

            auto properties = ipmi::getAllDbusProperties(
                bus, ipObjectInfo.second, ipObjectInfo.first,
                ipmi::network::IP_INTERFACE);

            ipaddress = std::get<std::string>(properties["Address"]);

            std::strcpy(data, ipaddress.c_str());
        }
        break;

        case LanParam::IPV6:
        {
            auto ethIP = ethdevice + "/" + ipmi::network::IPV6_TYPE;
            std::string ipaddress;
            auto ipObjectInfo = ipmi::network::getIPObject(
                bus, ipmi::network::IP_INTERFACE, ipmi::network::ROOT, ethIP);

            auto properties = ipmi::getAllDbusProperties(
                bus, ipObjectInfo.second, ipObjectInfo.first,
                ipmi::network::IP_INTERFACE);

            ipaddress = std::get<std::string>(properties["Address"]);

            std::strcpy(data, ipaddress.c_str());
        }
        break;

        case LanParam::MAC:
        {
            std::string macAddress;
            auto macObjectInfo =
                ipmi::getDbusObject(bus, ipmi::network::MAC_INTERFACE,
                                    ipmi::network::ROOT, ethdevice);

            auto variant = ipmi::getDbusProperty(
                bus, macObjectInfo.second, macObjectInfo.first,
                ipmi::network::MAC_INTERFACE, "MACAddress");

            macAddress = std::get<std::string>(variant);

            sscanf(macAddress.c_str(), ipmi::network::MAC_ADDRESS_FORMAT,
                   (data), (data + 1), (data + 2), (data + 3), (data + 4),
                   (data + 5));
            std::strcpy(data, macAddress.c_str());
        }
        break;

        default:
            rc = IPMI_CC_PARM_OUT_OF_RANGE;
    }
    return rc;
}

// return code: 0 successful
int8_t getFruData(std::string& data, std::string& name)
{
    std::string objpath = "/xyz/openbmc_project/FruDevice";
    std::string intf = "xyz.openbmc_project.FruDeviceManager";
    std::string service = getService(dbus, intf, objpath);
    ObjectValueTree valueTree = getManagedObjects(dbus, service, "/");
    if (valueTree.empty())
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "No object implements interface",
            phosphor::logging::entry("INTF=%s", intf.c_str()));
        return -1;
    }

    for (const auto& item : valueTree)
    {
        auto interface = item.second.find("xyz.openbmc_project.FruDevice");
        if (interface == item.second.end())
        {
            continue;
        }

        auto property = interface->second.find(name.c_str());
        if (property == interface->second.end())
        {
            continue;
        }

        try
        {
            Value variant = property->second;
            std::string& result = std::get<std::string>(variant);
            if (result.size() > maxFRUStringLength)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "FRU serial number exceed maximum length");
                return -1;
            }
            data = result;
            return 0;
        }
        catch (std::bad_variant_access& e)
        {
            phosphor::logging::log<phosphor::logging::level::ERR>(e.what());
            return -1;
        }
    }
    return -1;
}

typedef struct
{
    uint8_t cur_power_state;
    uint8_t last_power_event;
    uint8_t misc_power_state;
    uint8_t front_panel_button_cap_status;
} ipmi_get_chassis_status_t;

//----------------------------------------------------------------------
// Get Debug Frame Info
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemDbgGetFrameInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                  ipmi_request_t request,
                                  ipmi_response_t response,
                                  ipmi_data_len_t data_len,
                                  ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    uint8_t num_frames = 3;

    std::memcpy(res, req, SIZE_IANA_ID); // IANA ID
    res[SIZE_IANA_ID] = num_frames;
    *data_len = SIZE_IANA_ID + 1;

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Debug Updated Frames
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemDbgGetUpdFrames(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                  ipmi_request_t request,
                                  ipmi_response_t response,
                                  ipmi_data_len_t data_len,
                                  ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    uint8_t num_updates = 3;
    *data_len = 4;

    std::memcpy(res, req, SIZE_IANA_ID); // IANA ID
    res[SIZE_IANA_ID] = num_updates;
    *data_len = SIZE_IANA_ID + num_updates + 1;
    res[SIZE_IANA_ID + 1] = 1; // info page update
    res[SIZE_IANA_ID + 2] = 2; // cri sel update
    res[SIZE_IANA_ID + 3] = 3; // cri sensor update

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Debug POST Description
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemDbgGetPostDesc(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                 ipmi_request_t request,
                                 ipmi_response_t response,
                                 ipmi_data_len_t data_len,
                                 ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    uint8_t index = 0;
    uint8_t next = 0;
    uint8_t end = 0;
    uint8_t phase = 0;
    uint8_t descLen = 0;
    int ret;

    index = req[3];
    phase = req[4];

    ret = plat_udbg_get_post_desc(index, &next, phase, &end, &descLen, &res[8]);
    if (ret)
    {
        memcpy(res, req, SIZE_IANA_ID); // IANA ID
        *data_len = SIZE_IANA_ID;
        return IPMI_CC_UNSPECIFIED_ERROR;
    }

    memcpy(res, req, SIZE_IANA_ID); // IANA ID
    res[3] = index;
    res[4] = next;
    res[5] = phase;
    res[6] = end;
    res[7] = descLen;
    *data_len = SIZE_IANA_ID + 5 + descLen;

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Debug GPIO Description
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemDbgGetGpioDesc(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                 ipmi_request_t request,
                                 ipmi_response_t response,
                                 ipmi_data_len_t data_len,
                                 ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);

    uint8_t index = 0;
    uint8_t next = 0;
    uint8_t level = 0;
    uint8_t pinDef = 0;
    uint8_t descLen = 0;
    int ret;

    index = req[3];

    ret = plat_udbg_get_gpio_desc(index, &next, &level, &pinDef, &descLen,
                                  &res[8]);
    if (ret)
    {
        memcpy(res, req, SIZE_IANA_ID); // IANA ID
        *data_len = SIZE_IANA_ID;
        return IPMI_CC_UNSPECIFIED_ERROR;
    }

    memcpy(res, req, SIZE_IANA_ID); // IANA ID
    res[3] = index;
    res[4] = next;
    res[5] = level;
    res[6] = pinDef;
    res[7] = descLen;
    *data_len = SIZE_IANA_ID + 5 + descLen;

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Debug Frame Data
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemDbgGetFrameData(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                  ipmi_request_t request,
                                  ipmi_response_t response,
                                  ipmi_data_len_t data_len,
                                  ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    uint8_t frame;
    uint8_t page;
    uint8_t next;
    uint8_t count;
    int ret;

    frame = req[3];
    page = req[4];
    int fr = frame;
    int pg = page;

    ret = plat_udbg_get_frame_data(frame, page, &next, &count, &res[7]);
    if (ret)
    {
        memcpy(res, req, SIZE_IANA_ID); // IANA ID
        *data_len = SIZE_IANA_ID;
        return IPMI_CC_UNSPECIFIED_ERROR;
    }

    memcpy(res, req, SIZE_IANA_ID); // IANA ID
    res[3] = frame;
    res[4] = page;
    res[5] = next;
    res[6] = count;
    *data_len = SIZE_IANA_ID + 4 + count;

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Debug Control Panel
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemDbgGetCtrlPanel(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                  ipmi_request_t request,
                                  ipmi_response_t response,
                                  ipmi_data_len_t data_len,
                                  ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);

    uint8_t panel;
    uint8_t operation;
    uint8_t item;
    uint8_t count;
    ipmi_ret_t ret;

    panel = req[3];
    operation = req[4];
    item = req[5];

    ret = plat_udbg_control_panel(panel, operation, item, &count, &res[3]);

    std::memcpy(res, req, SIZE_IANA_ID); // IANA ID
    *data_len = SIZE_IANA_ID + count;

    return ret;
}

//----------------------------------------------------------------------
// Set Dimm Info (CMD_OEM_SET_DIMM_INFO)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetDimmInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                              ipmi_request_t request, ipmi_response_t response,
                              ipmi_data_len_t data_len, ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);

    uint8_t index = req[0];
    uint8_t type = req[1];
    uint16_t speed;
    uint32_t size;

    memcpy(&speed, &req[2], 2);
    memcpy(&size, &req[4], 4);

    std::stringstream ss;
    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)index;

    oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_INDEX] = index;
    oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_TYPE] = type;
    oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_SPEED] = speed;
    oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_SIZE] = size;

    flushOemData();

    *data_len = 0;

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Board ID (CMD_OEM_GET_BOARD_ID)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemGetBoardID(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                             ipmi_request_t request, ipmi_response_t response,
                             ipmi_data_len_t data_len, ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);

    /* TODO: Needs to implement this after GPIO implementation */
    *data_len = 0;

    return IPMI_CC_OK;
}

/* Helper functions to set boot order */
void setBootOrder(std::string bootObjPath, uint8_t* data,
                  std::string bootOrderKey)
{

    std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus();

    // SETTING BOOT MODE PROPERTY
    auto bootValue = ipmi::boot::modeIpmiToDbus.find((data[0]));
    std::string bootOption =
        ipmi::boot::Mode::convertModesToString((bootValue->second));

    std::string service =
        getService(*dbus, ipmi::boot::bootModeIntf, bootObjPath);
    setDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootModeIntf,
                    ipmi::boot::bootModeProp, bootOption);

    // SETTING BOOT SOURCE PROPERTY
    auto bootOrder = ipmi::boot::sourceIpmiToDbus.find((data[1]));
    std::string bootSource =
        ipmi::boot::Source::convertSourcesToString((bootOrder->second));

    service = getService(*dbus, ipmi::boot::bootSourceIntf, bootObjPath);
    setDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootSourceIntf,
                    ipmi::boot::bootSourceProp, bootSource);

    nlohmann::json bootMode;
    uint8_t mode = data[0];
    int i;

    bootMode["UEFI"] = (mode & BOOT_MODE_UEFI ? true : false);
    bootMode["CMOS_CLR"] = (mode & BOOT_MODE_CMOS_CLR ? true : false);
    bootMode["FORCE_BOOT"] = (mode & BOOT_MODE_FORCE_BOOT ? true : false);
    bootMode["BOOT_FLAG"] = (mode & BOOT_MODE_BOOT_FLAG ? true : false);
    oemData[bootOrderKey][KEY_BOOT_MODE] = bootMode;

    /* Initialize boot sequence array */
    oemData[bootOrderKey][KEY_BOOT_SEQ] = {};
    for (i = 1; i < SIZE_BOOT_ORDER; i++)
    {
        if (data[i] >= BOOT_SEQ_ARRAY_SIZE)
            oemData[bootOrderKey][KEY_BOOT_SEQ][i - 1] = "NA";
        else
            oemData[bootOrderKey][KEY_BOOT_SEQ][i - 1] = bootSeq[data[i]];
    }

    flushOemData();
}

//----------------------------------------------------------------------
// Set Boot Order (CMD_OEM_SET_BOOT_ORDER)
//----------------------------------------------------------------------
ipmi::RspType<std::vector<uint8_t>>
    ipmiOemSetBootOrder(ipmi::Context::ptr ctx, std::vector<uint8_t> data)
{

    uint8_t bootSeq[SIZE_BOOT_ORDER];
    size_t len = data.size();

    if (len != SIZE_BOOT_ORDER)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid Boot order length received");
        return ipmi::responseReqDataLenInvalid();
    }

    std::copy(std::begin(data), std::end(data), bootSeq);
    std::optional<size_t> hostId = ipmi::boot::findHost(ctx->hostIdx);

    if (!hostId)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid Host Id received");
        return ipmi::responseInvalidCommand();
    }
    auto [bootObjPath, hostName] = ipmi::boot::objPath(*hostId);

    setBootOrder(bootObjPath, bootSeq, hostName);

    return ipmi::responseSuccess(data);
}

//----------------------------------------------------------------------
// Get Boot Order (CMD_OEM_GET_BOOT_ORDER)
//----------------------------------------------------------------------
ipmi::RspType<uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t>
    ipmiOemGetBootOrder(ipmi::Context::ptr ctx)
{
    uint8_t bootOption, bootOrder;
    uint8_t bootSeq[SIZE_BOOT_ORDER];
    uint8_t mode = 0;

    std::optional<size_t> hostId = ipmi::boot::findHost(ctx->hostIdx);

    if (!hostId)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid Host Id received");
        return ipmi::responseInvalidCommand();
    }
    auto [bootObjPath, hostName] = ipmi::boot::objPath(*hostId);

    // GETTING PROPERTY OF MODE INTERFACE

    std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus();

    std::string service =
        getService(*dbus, ipmi::boot::bootModeIntf, bootObjPath);
    Value variant =
        getDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootModeIntf,
                        ipmi::boot::bootModeProp);

    auto bootMode = ipmi::boot::Mode::convertModesFromString(
        std::get<std::string>(variant));

    bootOption = ipmi::boot::modeDbusToIpmi.at(bootMode);

    // GETTING PROPERTY OF SOURCE INTERFACE

    service = getService(*dbus, ipmi::boot::bootSourceIntf, bootObjPath);
    variant =
        getDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootSourceIntf,
                        ipmi::boot::bootSourceProp);
    auto bootSource = ipmi::boot::Source::convertSourcesFromString(
        std::get<std::string>(variant));

    bootOrder = ipmi::boot::sourceDbusToIpmi.at(bootSource);

    if (oemData.find(hostName) == oemData.end())
    {
        /* Return default boot order 0100090203ff */
        uint8_t defaultBoot[SIZE_BOOT_ORDER] = {
            BOOT_MODE_UEFI,      bootMap["USB_DEV"], bootMap["NET_IPV6"],
            bootMap["SATA_HDD"], bootMap["SATA_CD"], 0xff};

        memcpy(bootSeq, defaultBoot, SIZE_BOOT_ORDER);
        phosphor::logging::log<phosphor::logging::level::INFO>(
            "Set default boot order");
        setBootOrder(bootObjPath, defaultBoot, hostName);
    }
    else
    {
        nlohmann::json bootMode = oemData[hostName][KEY_BOOT_MODE];
        if (bootMode["UEFI"])
            mode |= BOOT_MODE_UEFI;
        if (bootMode["CMOS_CLR"])
            mode |= BOOT_MODE_CMOS_CLR;
        if (bootMode["BOOT_FLAG"])
            mode |= BOOT_MODE_BOOT_FLAG;

        bootSeq[0] = mode;

        for (int i = 1; i < SIZE_BOOT_ORDER; i++)
        {
            std::string seqStr = oemData[hostName][KEY_BOOT_SEQ][i - 1];
            if (bootMap.find(seqStr) != bootMap.end())
                bootSeq[i] = bootMap[seqStr];
            else
                bootSeq[i] = 0xff;
        }
    }

    return ipmi::responseSuccess(bootOption, bootOrder, bootSeq[2], bootSeq[3],
                                 bootSeq[4], bootSeq[5]);
}
// Set Machine Config Info (CMD_OEM_SET_MACHINE_CONFIG_INFO)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetMachineCfgInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                    ipmi_request_t request,
                                    ipmi_response_t response,
                                    ipmi_data_len_t data_len,
                                    ipmi_context_t context)
{
    machineConfigInfo_t* req = reinterpret_cast<machineConfigInfo_t*>(request);
    uint8_t len = *data_len;

    *data_len = 0;

    if (len < sizeof(machineConfigInfo_t))
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid machine configuration length received");
        return IPMI_CC_REQ_DATA_LEN_INVALID;
    }

    if (req->chassis_type >= sizeof(chassisType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_CHAS_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_CHAS_TYPE] =
            chassisType[req->chassis_type];

    if (req->mb_type >= sizeof(mbType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_MB_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_MB_TYPE] = mbType[req->mb_type];

    oemData[KEY_MC_CONFIG][KEY_MC_PROC_CNT] = req->proc_cnt;
    oemData[KEY_MC_CONFIG][KEY_MC_MEM_CNT] = req->mem_cnt;
    oemData[KEY_MC_CONFIG][KEY_MC_HDD35_CNT] = req->hdd35_cnt;
    oemData[KEY_MC_CONFIG][KEY_MC_HDD25_CNT] = req->hdd25_cnt;

    if (req->riser_type >= sizeof(riserType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_RSR_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_RSR_TYPE] = riserType[req->riser_type];

    oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC] = {};
    int i = 0;
    if (req->pcie_card_loc & BIT_0)
        oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT1";
    if (req->pcie_card_loc & BIT_1)
        oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT2";
    if (req->pcie_card_loc & BIT_2)
        oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT3";
    if (req->pcie_card_loc & BIT_3)
        oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT4";

    if (req->slot1_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT1_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT1_TYPE] =
            pcieType[req->slot1_pcie_type];

    if (req->slot2_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT2_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT2_TYPE] =
            pcieType[req->slot2_pcie_type];

    if (req->slot3_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT3_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT3_TYPE] =
            pcieType[req->slot3_pcie_type];

    if (req->slot4_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*))
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT4_TYPE] = "UNKNOWN";
    else
        oemData[KEY_MC_CONFIG][KEY_MC_SLOT4_TYPE] =
            pcieType[req->slot4_pcie_type];

    oemData[KEY_MC_CONFIG][KEY_MC_AEP_CNT] = req->aep_mem_cnt;

    flushOemData();

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set POST start (CMD_OEM_SET_POST_START)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetPostStart(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                               ipmi_request_t request, ipmi_response_t response,
                               ipmi_data_len_t data_len, ipmi_context_t context)
{
    phosphor::logging::log<phosphor::logging::level::INFO>("POST Start Event");

    /* Do nothing, return success */
    *data_len = 0;
    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set POST End (CMD_OEM_SET_POST_END)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetPostEnd(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                             ipmi_request_t request, ipmi_response_t response,
                             ipmi_data_len_t data_len, ipmi_context_t context)
{
    struct timespec ts;

    phosphor::logging::log<phosphor::logging::level::INFO>("POST End Event");

    *data_len = 0;

    // Timestamp post end time.
    clock_gettime(CLOCK_REALTIME, &ts);
    oemData[KEY_TS_SLED] = ts.tv_sec;
    flushOemData();

    // Sync time with system
    // TODO: Add code for syncing time

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set PPIN Info (CMD_OEM_SET_PPIN_INFO)
//----------------------------------------------------------------------
// Inform BMC about PPIN data of 8 bytes for each CPU
//
// Request:
// Byte 1:8 – CPU0 PPIN data
// Optional:
// Byte 9:16 – CPU1 PPIN data
//
// Response:
// Byte 1 – Completion Code
ipmi_ret_t ipmiOemSetPPINInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                              ipmi_request_t request, ipmi_response_t response,
                              ipmi_data_len_t data_len, ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    std::string ppinStr;
    int len;

    if (*data_len > SIZE_CPU_PPIN * 2)
        len = SIZE_CPU_PPIN * 2;
    else
        len = *data_len;
    *data_len = 0;

    ppinStr = bytesToStr(req, len);
    oemData[KEY_PPIN_INFO] = ppinStr.c_str();
    flushOemData();

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set ADR Trigger (CMD_OEM_SET_ADR_TRIGGER)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetAdrTrigger(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                ipmi_request_t request,
                                ipmi_response_t response,
                                ipmi_data_len_t data_len,
                                ipmi_context_t context)
{
    /* Do nothing, return success */
    *data_len = 0;
    return IPMI_CC_OK;
}

// Helper function to set guid at offset in EEPROM
static int setGUID(off_t offset, uint8_t* guid)
{
    int fd = -1;
    ssize_t len;
    int ret = 0;

    errno = 0;

    // Check if file is present
    if (access(FRU_EEPROM, F_OK) == -1)
    {
        std::cerr << "Unable to access: " << FRU_EEPROM << std::endl;
        return errno;
    }

    // Open the file
    fd = open(FRU_EEPROM, O_WRONLY);
    if (fd == -1)
    {
        std::cerr << "Unable to open: " << FRU_EEPROM << std::endl;
        return errno;
    }

    // seek to the offset
    lseek(fd, offset, SEEK_SET);

    // Write bytes to location
    len = write(fd, guid, GUID_SIZE);
    if (len != GUID_SIZE)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "GUID write data to EEPROM failed");
        ret = errno;
    }

    close(fd);
    return ret;
}

//----------------------------------------------------------------------
// Set System GUID (CMD_OEM_SET_SYSTEM_GUID)
//----------------------------------------------------------------------
#if BIC_ENABLED
ipmi::RspType<> ipmiOemSetSystemGuid(ipmi::Context::ptr ctx, uint8_t cmdReq,
                                     std::vector<uint8_t> reqData)
{
    std::vector<uint8_t> respData;

    if (reqData.size() != GUID_SIZE) // 16bytes
    {

        return ipmi::responseReqDataLenInvalid();
    }

    auto ptrReqData = reqData.insert(reqData.begin(), reqData.size());

    uint8_t bicAddr = (uint8_t)ctx->hostIdx << 2;

    if (sendBicCmd(ctx->netFn, ctx->cmd, bicAddr, reqData, respData))
        return ipmi::responseUnspecifiedError();

    return ipmi::responseSuccess();
}

#else
ipmi_ret_t ipmiOemSetSystemGuid(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                ipmi_request_t request,
                                ipmi_response_t response,
                                ipmi_data_len_t data_len,
                                ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);

    if (*data_len != GUID_SIZE) // 16bytes
    {
        *data_len = 0;
        return IPMI_CC_REQ_DATA_LEN_INVALID;
    }

    *data_len = 0;

    if (setGUID(OFFSET_SYS_GUID, req))
    {
        return IPMI_CC_UNSPECIFIED_ERROR;
    }
    return IPMI_CC_OK;
}
#endif

//----------------------------------------------------------------------
// Set Bios Flash Info (CMD_OEM_SET_BIOS_FLASH_INFO)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetBiosFlashInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                   ipmi_request_t request,
                                   ipmi_response_t response,
                                   ipmi_data_len_t data_len,
                                   ipmi_context_t context)
{
    /* Do nothing, return success */
    *data_len = 0;
    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set PPR (CMD_OEM_SET_PPR)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemSetPpr(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                         ipmi_request_t request, ipmi_response_t response,
                         ipmi_data_len_t data_len, ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t pprCnt, pprAct, pprIndex;
    uint8_t selParam = req[0];
    uint8_t len = *data_len;
    std::stringstream ss;
    std::string str;

    *data_len = 0;

    switch (selParam)
    {
        case PPR_ACTION:
            if (oemData[KEY_PPR].find(KEY_PPR_ROW_COUNT) ==
                oemData[KEY_PPR].end())
                return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

            pprCnt = oemData[KEY_PPR][KEY_PPR_ROW_COUNT];
            if (pprCnt == 0)
                return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

            pprAct = req[1];
            /* Check if ppr is enabled or disabled */
            if (!(pprAct & 0x80))
                pprAct = 0;

            oemData[KEY_PPR][KEY_PPR_ACTION] = pprAct;
            break;
        case PPR_ROW_COUNT:
            if (req[1] > 100)
                return IPMI_CC_PARM_OUT_OF_RANGE;

            oemData[KEY_PPR][KEY_PPR_ROW_COUNT] = req[1];
            break;
        case PPR_ROW_ADDR:
            pprIndex = req[1];
            if (pprIndex > 100)
                return IPMI_CC_PARM_OUT_OF_RANGE;

            if (len < PPR_ROW_ADDR_LEN + 1)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Invalid PPR Row Address length received");
                return IPMI_CC_REQ_DATA_LEN_INVALID;
            }

            ss << std::hex;
            ss << std::setw(2) << std::setfill('0') << (int)pprIndex;

            oemData[KEY_PPR][ss.str()][KEY_PPR_INDEX] = pprIndex;

            str = bytesToStr(&req[1], PPR_ROW_ADDR_LEN);
            oemData[KEY_PPR][ss.str()][KEY_PPR_ROW_ADDR] = str.c_str();
            break;
        case PPR_HISTORY_DATA:
            pprIndex = req[1];
            if (pprIndex > 100)
                return IPMI_CC_PARM_OUT_OF_RANGE;

            if (len < PPR_HST_DATA_LEN + 1)
            {
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "Invalid PPR history data length received");
                return IPMI_CC_REQ_DATA_LEN_INVALID;
            }

            ss << std::hex;
            ss << std::setw(2) << std::setfill('0') << (int)pprIndex;

            oemData[KEY_PPR][ss.str()][KEY_PPR_INDEX] = pprIndex;

            str = bytesToStr(&req[1], PPR_HST_DATA_LEN);
            oemData[KEY_PPR][ss.str()][KEY_PPR_HST_DATA] = str.c_str();
            break;
        default:
            return IPMI_CC_PARM_OUT_OF_RANGE;
            break;
    }

    flushOemData();

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get PPR (CMD_OEM_GET_PPR)
//----------------------------------------------------------------------
ipmi_ret_t ipmiOemGetPpr(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                         ipmi_request_t request, ipmi_response_t response,
                         ipmi_data_len_t data_len, ipmi_context_t context)
{
    uint8_t* req = reinterpret_cast<uint8_t*>(request);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    uint8_t pprCnt, pprIndex;
    uint8_t selParam = req[0];
    std::stringstream ss;
    std::string str;

    /* Any failure will return zero length data */
    *data_len = 0;

    switch (selParam)
    {
        case PPR_ACTION:
            res[0] = 0;
            *data_len = 1;

            if (oemData[KEY_PPR].find(KEY_PPR_ROW_COUNT) !=
                oemData[KEY_PPR].end())
            {
                pprCnt = oemData[KEY_PPR][KEY_PPR_ROW_COUNT];
                if (pprCnt != 0)
                {
                    if (oemData[KEY_PPR].find(KEY_PPR_ACTION) !=
                        oemData[KEY_PPR].end())
                    {
                        res[0] = oemData[KEY_PPR][KEY_PPR_ACTION];
                    }
                }
            }
            break;
        case PPR_ROW_COUNT:
            res[0] = 0;
            *data_len = 1;
            if (oemData[KEY_PPR].find(KEY_PPR_ROW_COUNT) !=
                oemData[KEY_PPR].end())
                res[0] = oemData[KEY_PPR][KEY_PPR_ROW_COUNT];
            break;
        case PPR_ROW_ADDR:
            pprIndex = req[1];
            if (pprIndex > 100)
                return IPMI_CC_PARM_OUT_OF_RANGE;

            ss << std::hex;
            ss << std::setw(2) << std::setfill('0') << (int)pprIndex;

            if (oemData[KEY_PPR].find(ss.str()) == oemData[KEY_PPR].end())
                return IPMI_CC_PARM_OUT_OF_RANGE;

            if (oemData[KEY_PPR][ss.str()].find(KEY_PPR_ROW_ADDR) ==
                oemData[KEY_PPR][ss.str()].end())
                return IPMI_CC_PARM_OUT_OF_RANGE;

            str = oemData[KEY_PPR][ss.str()][KEY_PPR_ROW_ADDR];
            *data_len = strToBytes(str, res);
            break;
        case PPR_HISTORY_DATA:
            pprIndex = req[1];
            if (pprIndex > 100)
                return IPMI_CC_PARM_OUT_OF_RANGE;

            ss << std::hex;
            ss << std::setw(2) << std::setfill('0') << (int)pprIndex;

            if (oemData[KEY_PPR].find(ss.str()) == oemData[KEY_PPR].end())
                return IPMI_CC_PARM_OUT_OF_RANGE;

            if (oemData[KEY_PPR][ss.str()].find(KEY_PPR_HST_DATA) ==
                oemData[KEY_PPR][ss.str()].end())
                return IPMI_CC_PARM_OUT_OF_RANGE;

            str = oemData[KEY_PPR][ss.str()][KEY_PPR_HST_DATA];
            *data_len = strToBytes(str, res);
            break;
        default:
            return IPMI_CC_PARM_OUT_OF_RANGE;
            break;
    }

    return IPMI_CC_OK;
}

/* FB OEM QC Commands */

//----------------------------------------------------------------------
// Set Proc Info (CMD_OEM_Q_SET_PROC_INFO)
//----------------------------------------------------------------------
//"Request:
// Byte 1:3 – Manufacturer ID – XXYYZZ h, LSB first
// Byte 4 – Processor Index, 0 base
// Byte 5 – Parameter Selector
// Byte 6..N – Configuration parameter data (see below for Parameters
// of Processor Information)
// Response:
// Byte 1 – Completion code
//
// Parameter#1: (Processor Product Name)
//
// Byte 1..48 –Product name(ASCII code)
// Ex. Intel(R) Xeon(R) CPU E5-2685 v3 @ 2.60GHz
//
// Param#2: Processor Basic Information
// Byte 1 – Core Number
// Byte 2 – Thread Number (LSB)
// Byte 3 – Thread Number (MSB)
// Byte 4 – Processor frequency in MHz (LSB)
// Byte 5 – Processor frequency in MHz (MSB)
// Byte 6..7 – Revision
//
ipmi_ret_t ipmiOemQSetProcInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                               ipmi_request_t request, ipmi_response_t response,
                               ipmi_data_len_t data_len, ipmi_context_t context)
{
    qProcInfo_t* req = reinterpret_cast<qProcInfo_t*>(request);
    uint8_t numParam = sizeof(cpuInfoKey) / sizeof(uint8_t*);
    std::stringstream ss;
    std::string str;
    uint8_t len = *data_len;

    *data_len = 0;

    /* check for requested data params */
    if (len < 5 || req->paramSel < 1 || req->paramSel >= numParam)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid parameter received");
        return IPMI_CC_PARM_OUT_OF_RANGE;
    }

    len = len - 5; // Get Actual data length

    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)req->procIndex;
    oemData[KEY_Q_PROC_INFO][ss.str()][KEY_PROC_INDEX] = req->procIndex;

    str = bytesToStr(req->data, len);
    oemData[KEY_Q_PROC_INFO][ss.str()][cpuInfoKey[req->paramSel]] = str.c_str();
    flushOemData();

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Proc Info (CMD_OEM_Q_GET_PROC_INFO)
//----------------------------------------------------------------------
// Request:
// Byte 1:3 –  Manufacturer ID – XXYYZZ h, LSB first
// Byte 4 – Processor Index, 0 base
// Byte 5 – Parameter Selector
// Response:
// Byte 1 – Completion code
// Byte 2..N – Configuration Parameter Data (see below for Parameters
// of Processor Information)
//
// Parameter#1: (Processor Product Name)
//
// Byte 1..48 –Product name(ASCII code)
// Ex. Intel(R) Xeon(R) CPU E5-2685 v3 @ 2.60GHz
//
// Param#2: Processor Basic Information
// Byte 1 – Core Number
// Byte 2 – Thread Number (LSB)
// Byte 3 – Thread Number (MSB)
// Byte 4 – Processor frequency in MHz (LSB)
// Byte 5 – Processor frequency in MHz (MSB)
// Byte 6..7 – Revision
//
ipmi_ret_t ipmiOemQGetProcInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                               ipmi_request_t request, ipmi_response_t response,
                               ipmi_data_len_t data_len, ipmi_context_t context)
{
    qProcInfo_t* req = reinterpret_cast<qProcInfo_t*>(request);
    uint8_t numParam = sizeof(cpuInfoKey) / sizeof(uint8_t*);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    std::stringstream ss;
    std::string str;

    *data_len = 0;

    /* check for requested data params */
    if (req->paramSel < 1 || req->paramSel >= numParam)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid parameter received");
        return IPMI_CC_PARM_OUT_OF_RANGE;
    }

    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)req->procIndex;

    if (oemData[KEY_Q_PROC_INFO].find(ss.str()) ==
        oemData[KEY_Q_PROC_INFO].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    if (oemData[KEY_Q_PROC_INFO][ss.str()].find(cpuInfoKey[req->paramSel]) ==
        oemData[KEY_Q_PROC_INFO][ss.str()].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    str = oemData[KEY_Q_PROC_INFO][ss.str()][cpuInfoKey[req->paramSel]];
    *data_len = strToBytes(str, res);

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set Dimm Info (CMD_OEM_Q_SET_DIMM_INFO)
//----------------------------------------------------------------------
// Request:
// Byte 1:3 – Manufacturer ID – XXYYZZh, LSB first
// Byte 4 – DIMM Index, 0 base
// Byte 5 – Parameter Selector
// Byte 6..N – Configuration parameter data (see below for Parameters
// of DIMM Information)
// Response:
// Byte 1 – Completion code
//
// Param#1 (DIMM Location):
// Byte 1 – DIMM Present
// Byte 1 – DIMM Present
// 01h – Present
// FFh – Not Present
// Byte 2 – Node Number, 0 base
// Byte 3 – Channel Number , 0 base
// Byte 4 – DIMM Number , 0 base
//
// Param#2 (DIMM Type):
// Byte 1 – DIMM Type
// Bit [7:6]
// For DDR3
//  00 – Normal Voltage (1.5V)
//  01 – Ultra Low Voltage (1.25V)
//  10 – Low Voltage (1.35V)
//  11 – Reserved
// For DDR4
//  00 – Reserved
//  01 – Reserved
//  10 – Reserved
//  11 – Normal Voltage (1.2V)
// Bit [5:0]
//  0x00 – SDRAM
//  0x01 – DDR-1 RAM
//  0x02 – Rambus
//  0x03 – DDR-2 RAM
//  0x04 – FBDIMM
//  0x05 – DDR-3 RAM
//  0x06 – DDR-4 RAM
//
// Param#3 (DIMM Speed):
// Byte 1..2 – DIMM speed in MHz, LSB
// Byte 3..6 – DIMM size in Mbytes, LSB
//
// Param#4 (Module Part Number):
// Byte 1..20 –Module Part Number (JEDEC Standard No. 21-C)
//
// Param#5 (Module Serial Number):
// Byte 1..4 –Module Serial Number (JEDEC Standard No. 21-C)
//
// Param#6 (Module Manufacturer ID):
// Byte 1 - Module Manufacturer ID, LSB
// Byte 2 - Module Manufacturer ID, MSB
//
ipmi_ret_t ipmiOemQSetDimmInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                               ipmi_request_t request, ipmi_response_t response,
                               ipmi_data_len_t data_len, ipmi_context_t context)
{
    qDimmInfo_t* req = reinterpret_cast<qDimmInfo_t*>(request);
    uint8_t numParam = sizeof(dimmInfoKey) / sizeof(uint8_t*);
    std::stringstream ss;
    std::string str;
    uint8_t len = *data_len;

    *data_len = 0;

    /* check for requested data params */
    if (len < 5 || req->paramSel < 1 || req->paramSel >= numParam)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid parameter received");
        return IPMI_CC_PARM_OUT_OF_RANGE;
    }

    len = len - 5; // Get Actual data length

    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)req->dimmIndex;
    oemData[KEY_Q_DIMM_INFO][ss.str()][KEY_DIMM_INDEX] = req->dimmIndex;

    str = bytesToStr(req->data, len);
    oemData[KEY_Q_DIMM_INFO][ss.str()][dimmInfoKey[req->paramSel]] =
        str.c_str();
    flushOemData();

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Dimm Info (CMD_OEM_Q_GET_DIMM_INFO)
//----------------------------------------------------------------------
// Request:
// Byte 1:3 – Manufacturer ID – XXYYZZh, LSB first
// Byte 4 – DIMM Index, 0 base
// Byte 5 – Parameter Selector
// Byte 6..N – Configuration parameter data (see below for Parameters
// of DIMM Information)
// Response:
// Byte 1 – Completion code
// Byte 2..N – Configuration Parameter Data (see Table_1213h Parameters
// of DIMM Information)
//
// Param#1 (DIMM Location):
// Byte 1 – DIMM Present
// Byte 1 – DIMM Present
// 01h – Present
// FFh – Not Present
// Byte 2 – Node Number, 0 base
// Byte 3 – Channel Number , 0 base
// Byte 4 – DIMM Number , 0 base
//
// Param#2 (DIMM Type):
// Byte 1 – DIMM Type
// Bit [7:6]
// For DDR3
//  00 – Normal Voltage (1.5V)
//  01 – Ultra Low Voltage (1.25V)
//  10 – Low Voltage (1.35V)
//  11 – Reserved
// For DDR4
//  00 – Reserved
//  01 – Reserved
//  10 – Reserved
//  11 – Normal Voltage (1.2V)
// Bit [5:0]
//  0x00 – SDRAM
//  0x01 – DDR-1 RAM
//  0x02 – Rambus
//  0x03 – DDR-2 RAM
//  0x04 – FBDIMM
//  0x05 – DDR-3 RAM
//  0x06 – DDR-4 RAM
//
// Param#3 (DIMM Speed):
// Byte 1..2 – DIMM speed in MHz, LSB
// Byte 3..6 – DIMM size in Mbytes, LSB
//
// Param#4 (Module Part Number):
// Byte 1..20 –Module Part Number (JEDEC Standard No. 21-C)
//
// Param#5 (Module Serial Number):
// Byte 1..4 –Module Serial Number (JEDEC Standard No. 21-C)
//
// Param#6 (Module Manufacturer ID):
// Byte 1 - Module Manufacturer ID, LSB
// Byte 2 - Module Manufacturer ID, MSB
//
ipmi_ret_t ipmiOemQGetDimmInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                               ipmi_request_t request, ipmi_response_t response,
                               ipmi_data_len_t data_len, ipmi_context_t context)
{
    qDimmInfo_t* req = reinterpret_cast<qDimmInfo_t*>(request);
    uint8_t numParam = sizeof(dimmInfoKey) / sizeof(uint8_t*);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    std::stringstream ss;
    std::string str;

    *data_len = 0;

    /* check for requested data params */
    if (req->paramSel < 1 || req->paramSel >= numParam)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid parameter received");
        return IPMI_CC_PARM_OUT_OF_RANGE;
    }

    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)req->dimmIndex;

    if (oemData[KEY_Q_DIMM_INFO].find(ss.str()) ==
        oemData[KEY_Q_DIMM_INFO].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    if (oemData[KEY_Q_DIMM_INFO][ss.str()].find(dimmInfoKey[req->paramSel]) ==
        oemData[KEY_Q_DIMM_INFO][ss.str()].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    str = oemData[KEY_Q_DIMM_INFO][ss.str()][dimmInfoKey[req->paramSel]];
    *data_len = strToBytes(str, res);

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Set Drive Info (CMD_OEM_Q_SET_DRIVE_INFO)
//----------------------------------------------------------------------
// BIOS issue this command to provide HDD information to BMC.
//
// BIOS just can get information by standard ATA / SMART command for
// OB SATA controller.
// BIOS can get
// 1.     Serial Number
// 2.     Model Name
// 3.     HDD FW Version
// 4.     HDD Capacity
// 5.     HDD WWN
//
//  Use Get HDD info Param #5 to know the MAX HDD info index.
//
//  Request:
//  Byte 1:3 – Quanta Manufacturer ID – 001C4Ch, LSB first
//  Byte 4 –
//  [7:4] Reserved
//  [3:0] HDD Controller Type
//     0x00 – BIOS
//     0x01 – Expander
//     0x02 – LSI
//  Byte 5 – HDD Info Index, 0 base
//  Byte 6 – Parameter Selector
//  Byte 7..N – Configuration parameter data (see Table_1415h Parameters of HDD
//  Information)
//
//  Response:
//  Byte 1 – Completion Code
//
//  Param#0 (HDD Location):
//  Byte 1 – Controller
//    [7:3] Device Number
//    [2:0] Function Number
//  For Intel C610 series (Wellsburg)
//    D31:F2 (0xFA) – SATA control 1
//    D31:F5 (0xFD) – SATA control 2
//    D17:F4 (0x8C) – sSata control
//  Byte 2 – Port Number
//  Byte 3 – Location (0xFF: No HDD Present)
//  BIOS default set Byte 3 to 0xFF, if No HDD Present. And then skip send param
//  #1~4, #6,  #7 to BMC (still send param #5) BIOS default set Byte 3 to 0, if
//  the HDD present. BMC or other people who know the HDD location has
//  responsibility for update Location info
//
//  Param#1 (Serial Number):
//  Bytes 1..33: HDD Serial Number
//
//  Param#2 (Model Name):
//  Byte 1..33 – HDD Model Name
//
//  Param#3 (HDD FW Version):
//  Byte 1..17 –HDD FW version
//
//  Param#4 (Capacity):
//  Byte 1..4 –HDD Block Size, LSB
//  Byte 5..12 - HDD Block Number, LSB
//  HDD Capacity = HDD Block size * HDD BLock number  (Unit Byte)
//
//  Param#5 (Max HDD Quantity):
//  Byte 1 - Max HDD Quantity
//  Max supported port numbers in this PCH
//
//  Param#6 (HDD Type)
//  Byte 1 – HDD Type
//  0h – Reserved
//  1h – SAS
//  2h – SATA
//  3h – PCIE SSD (NVME)
//
//  Param#7 (HDD WWN)
//  Data 1...8: HDD World Wide Name, LSB
//
ipmi_ret_t ipmiOemQSetDriveInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                ipmi_request_t request,
                                ipmi_response_t response,
                                ipmi_data_len_t data_len,
                                ipmi_context_t context)
{
    qDriveInfo_t* req = reinterpret_cast<qDriveInfo_t*>(request);
    uint8_t numParam = sizeof(driveInfoKey) / sizeof(uint8_t*);
    uint8_t ctrlType = req->hddCtrlType & 0x0f;
    std::stringstream ss;
    std::string str;
    uint8_t len = *data_len;

    *data_len = 0;

    /* check for requested data params */
    if (len < 6 || req->paramSel < 1 || req->paramSel >= numParam ||
        ctrlType > 2)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid parameter received");
        return IPMI_CC_PARM_OUT_OF_RANGE;
    }

    len = len - 6; // Get Actual data length

    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)req->hddIndex;
    oemData[KEY_Q_DRIVE_INFO][KEY_HDD_CTRL_TYPE] = req->hddCtrlType;
    oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()][KEY_HDD_INDEX] =
        req->hddIndex;

    str = bytesToStr(req->data, len);
    oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()]
           [driveInfoKey[req->paramSel]] = str.c_str();
    flushOemData();

    return IPMI_CC_OK;
}

//----------------------------------------------------------------------
// Get Drive Info (CMD_OEM_Q_GET_DRIVE_INFO)
//----------------------------------------------------------------------
// BMC needs to check HDD presented or not first. If NOT presented, return
// completion code 0xD5.
//
// Request:
// Byte 1:3 – Quanta Manufacturer ID – 001C4Ch, LSB first
// Byte 4 –
//[7:4] Reserved
//[3:0] HDD Controller Type
//   0x00 – BIOS
//   0x01 – Expander
//   0x02 – LSI
// Byte 5 – HDD Index, 0 base
// Byte 6 – Parameter Selector (See Above Set HDD Information)
// Response:
// Byte 1 – Completion Code
//   0xD5 – Not support in current status (HDD Not Present)
// Byte 2..N – Configuration parameter data (see Table_1415h Parameters of HDD
// Information)
//
ipmi_ret_t ipmiOemQGetDriveInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd,
                                ipmi_request_t request,
                                ipmi_response_t response,
                                ipmi_data_len_t data_len,
                                ipmi_context_t context)
{
    qDriveInfo_t* req = reinterpret_cast<qDriveInfo_t*>(request);
    uint8_t numParam = sizeof(driveInfoKey) / sizeof(uint8_t*);
    uint8_t* res = reinterpret_cast<uint8_t*>(response);
    uint8_t ctrlType = req->hddCtrlType & 0x0f;
    std::stringstream ss;
    std::string str;

    *data_len = 0;

    /* check for requested data params */
    if (req->paramSel < 1 || req->paramSel >= numParam || ctrlType > 2)
    {
        phosphor::logging::log<phosphor::logging::level::ERR>(
            "Invalid parameter received");
        return IPMI_CC_PARM_OUT_OF_RANGE;
    }

    if (oemData[KEY_Q_DRIVE_INFO].find(ctrlTypeKey[ctrlType]) ==
        oemData[KEY_Q_DRIVE_INFO].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    ss << std::hex;
    ss << std::setw(2) << std::setfill('0') << (int)req->hddIndex;

    if (oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]].find(ss.str()) ==
        oemData[KEY_Q_DRIVE_INFO].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    if (oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()].find(
            dimmInfoKey[req->paramSel]) ==
        oemData[KEY_Q_DRIVE_INFO][ss.str()].end())
        return CC_PARAM_NOT_SUPP_IN_CURR_STATE;

    str = oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()]
                 [dimmInfoKey[req->paramSel]];
    *data_len = strToBytes(str, res);

    return IPMI_CC_OK;
}

/* Helper function for sending DCMI commands to ME and getting response back */
ipmi::RspType<std::vector<uint8_t>> sendDCMICmd(uint8_t cmd,
                                                std::vector<uint8_t>& cmdData)
{
    std::vector<uint8_t> respData;

    /* Add group id as first byte to request for ME command */
    cmdData.insert(cmdData.begin(), groupDCMI);

    if (sendMeCmd(ipmi::netFnGroup, cmd, cmdData, respData))
        return ipmi::responseUnspecifiedError();

    /* Remove group id as first byte as it will be added by IPMID */
    respData.erase(respData.begin());

    return ipmi::responseSuccess(std::move(respData));
}

/* DCMI Command handellers. */

ipmi::RspType<std::vector<uint8_t>>
    ipmiOemDCMIGetPowerReading(std::vector<uint8_t> reqData)
{
    return sendDCMICmd(ipmi::dcmi::cmdGetPowerReading, reqData);
}

ipmi::RspType<std::vector<uint8_t>>
    ipmiOemDCMIGetPowerLimit(std::vector<uint8_t> reqData)
{
    return sendDCMICmd(ipmi::dcmi::cmdGetPowerLimit, reqData);
}

ipmi::RspType<std::vector<uint8_t>>
    ipmiOemDCMISetPowerLimit(std::vector<uint8_t> reqData)
{
    return sendDCMICmd(ipmi::dcmi::cmdSetPowerLimit, reqData);
}

ipmi::RspType<std::vector<uint8_t>>
    ipmiOemDCMIApplyPowerLimit(std::vector<uint8_t> reqData)
{
    return sendDCMICmd(ipmi::dcmi::cmdActDeactivatePwrLimit, reqData);
}

static void registerOEMFunctions(void)
{
    /* Get OEM data from json file */
    std::ifstream file(JSON_OEM_DATA_FILE);
    if (file)
    {
        file >> oemData;
        file.close();
    }

    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Registering OEM commands");

    ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_FRAME_INFO,
                         NULL, ipmiOemDbgGetFrameInfo,
                         PRIVILEGE_USER); // get debug frame info
    ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ,
                         CMD_OEM_USB_DBG_GET_UPDATED_FRAMES, NULL,
                         ipmiOemDbgGetUpdFrames,
                         PRIVILEGE_USER); // get debug updated frames
    ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_POST_DESC,
                         NULL, ipmiOemDbgGetPostDesc,
                         PRIVILEGE_USER); // get debug post description
    ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_GPIO_DESC,
                         NULL, ipmiOemDbgGetGpioDesc,
                         PRIVILEGE_USER); // get debug gpio description
    ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_FRAME_DATA,
                         NULL, ipmiOemDbgGetFrameData,
                         PRIVILEGE_USER); // get debug frame data
    ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_CTRL_PANEL,
                         NULL, ipmiOemDbgGetCtrlPanel,
                         PRIVILEGE_USER); // get debug control panel
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_DIMM_INFO, NULL,
                         ipmiOemSetDimmInfo,
                         PRIVILEGE_USER); // Set Dimm Info
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_GET_BOARD_ID, NULL,
                         ipmiOemGetBoardID,
                         PRIVILEGE_USER); // Get Board ID
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_MACHINE_CONFIG_INFO, NULL,
                         ipmiOemSetMachineCfgInfo,
                         PRIVILEGE_USER); // Set Machine Config Info
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_POST_START, NULL,
                         ipmiOemSetPostStart,
                         PRIVILEGE_USER); // Set POST start
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_POST_END, NULL,
                         ipmiOemSetPostEnd,
                         PRIVILEGE_USER); // Set POST End
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_PPIN_INFO, NULL,
                         ipmiOemSetPPINInfo,
                         PRIVILEGE_USER); // Set PPIN Info
#if BIC_ENABLED

    ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnOemOne,
                          ipmi::cmdSetSystemGuid, ipmi::Privilege::User,
                          ipmiOemSetSystemGuid);
#else

    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_SYSTEM_GUID, NULL,
                         ipmiOemSetSystemGuid,
                         PRIVILEGE_USER); // Set System GUID
#endif
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_ADR_TRIGGER, NULL,
                         ipmiOemSetAdrTrigger,
                         PRIVILEGE_USER); // Set ADR Trigger
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_BIOS_FLASH_INFO, NULL,
                         ipmiOemSetBiosFlashInfo,
                         PRIVILEGE_USER); // Set Bios Flash Info
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_PPR, NULL, ipmiOemSetPpr,
                         PRIVILEGE_USER); // Set PPR
    ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_GET_PPR, NULL, ipmiOemGetPpr,
                         PRIVILEGE_USER); // Get PPR
    /* FB OEM QC Commands */
    ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_SET_PROC_INFO, NULL,
                         ipmiOemQSetProcInfo,
                         PRIVILEGE_USER); // Set Proc Info
    ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_GET_PROC_INFO, NULL,
                         ipmiOemQGetProcInfo,
                         PRIVILEGE_USER); // Get Proc Info
    ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_SET_DIMM_INFO, NULL,
                         ipmiOemQSetDimmInfo,
                         PRIVILEGE_USER); // Set Dimm Info
    ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_GET_DIMM_INFO, NULL,
                         ipmiOemQGetDimmInfo,
                         PRIVILEGE_USER); // Get Dimm Info
    ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_SET_DRIVE_INFO, NULL,
                         ipmiOemQSetDriveInfo,
                         PRIVILEGE_USER); // Set Drive Info
    ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_GET_DRIVE_INFO, NULL,
                         ipmiOemQGetDriveInfo,
                         PRIVILEGE_USER); // Get Drive Info

    /* FB OEM DCMI Commands as per DCMI spec 1.5 Section 6 */
    ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI,
                               ipmi::dcmi::cmdGetPowerReading,
                               ipmi::Privilege::User,
                               ipmiOemDCMIGetPowerReading); // Get Power Reading

    ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI,
                               ipmi::dcmi::cmdGetPowerLimit,
                               ipmi::Privilege::User,
                               ipmiOemDCMIGetPowerLimit); // Get Power Limit

    ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI,
                               ipmi::dcmi::cmdSetPowerLimit,
                               ipmi::Privilege::Operator,
                               ipmiOemDCMISetPowerLimit); // Set Power Limit

    ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI,
                               ipmi::dcmi::cmdActDeactivatePwrLimit,
                               ipmi::Privilege::Operator,
                               ipmiOemDCMIApplyPowerLimit); // Apply Power Limit

    /* FB OEM BOOT ORDER COMMANDS */
    ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnOemOne,
                          CMD_OEM_GET_BOOT_ORDER, ipmi::Privilege::User,
                          ipmiOemGetBootOrder); // Get Boot Order

    ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnOemOne,
                          CMD_OEM_SET_BOOT_ORDER, ipmi::Privilege::User,
                          ipmiOemSetBootOrder); // Set Boot Order

    return;
}

} // namespace ipmi