Format markdown tables in README
The tables currently look broken.
Signed-off-by: Zhenfei Tai <ztai@google.com>
Change-Id: Ibd58b4385d6b8ac5666aa395b58fa19f4a28e8ba
diff --git a/README.md b/README.md
index 6dbd764..7955111 100644
--- a/README.md
+++ b/README.md
@@ -67,27 +67,25 @@
##### Request Data
-byte(s) | type | ID | Description
-------- | -------- | -------- | ----------------------------------------
-0 | byte | bus | i2c adapater number at BMC
-1 | ReqFlags | reqFlags | Flags for request
- | | | bit 7 - PEC flag for M_RECV_LEN transfer
- | | | bits 6:0 - zero -reserved for future use
-2+ | Step | - | One per struct i2c_msg in transfer.
+| byte(s) | type | ID | Description
+| ------- | -------- | -------- | ----------------------------------------
+| 0 | byte | bus | i2c adapater number at BMC
+| 1 | ReqFlags | reqFlags | Flags for request
+| | | | bit 7 - PEC flag for M_RECV_LEN transfer
+| | | | bits 6:0 - zero -reserved for future use
+| 2+ | Step | - | One per struct i2c_msg in transfer.
##### Each Request Step
-| byte(s) | type | ID | Description |
-| ------- | --------- | --------- | ------------------------------------------ |
-| 0 | byte | devAndDir | bit 0: 1 if step is read, 0 if write |
-| | | | bits 7:1 i2c device address |
-| 1 | StepFlags | stepFlags | Flags fro each step |
-| | | | bit 7: carries M_RECV_LEN bit - read steps |
-: : : : only :
-| | | | bit 6: reserved for M_NOSTART |
-| 2 | byte | parm | Transfer length (except M_RECV_LEN) |
-| 3-p+2 | byte | wr_data | Write steps only: parm bytes of data to |
-: : : : write. :
+| byte(s) | type | ID | Description |
+| ------- | --------- | --------- | ------------------------------------------ |
+| 0 | byte | devAndDir | bit 0: 1 if step is read, 0 if write |
+| | | | bits 7:1 i2c device address |
+| 1 | StepFlags | stepFlags | Flags fro each step |
+| | | | bit 7: carries M_RECV_LEN bit - read steps only |
+| | | | bit 6: reserved for M_NOSTART |
+| 2 | byte | parm | Transfer length (except M_RECV_LEN) |
+| 3-p+2 | byte | wr_data | Write steps only: parm bytes of data to write. |
#### Response