diff --git a/sections/cper-section-arm.c b/sections/cper-section-arm.c
index 58e97bf..8590414 100644
--- a/sections/cper-section-arm.c
+++ b/sections/cper-section-arm.c
@@ -50,7 +50,8 @@
     if (record->RunningState >> 31)
     {
         //Bit 32 of running state is on, so PSCI state information is included.
-        //todo: Look at how to make this human readable from the ARM PSCI document.
+        //This can't be made human readable, as it is unknown whether this will be the pre-PSCI 1.0 format
+        //or the newer Extended StateID format.
         json_object_object_add(section_ir, "psciState", json_object_new_int(record->PsciState));
     }
 
diff --git a/sections/cper-section-ccix-per.c b/sections/cper-section-ccix-per.c
index ae8a797..afba8d4 100644
--- a/sections/cper-section-ccix-per.c
+++ b/sections/cper-section-ccix-per.c
@@ -6,6 +6,7 @@
  **/
 #include <stdio.h>
 #include "json.h"
+#include "b64.h"
 #include "../edk/Cper.h"
 #include "../cper-utils.h"
 #include "cper-section-ccix-per.h"
@@ -28,8 +29,15 @@
     json_object_object_add(section_ir, "ccixPortID", json_object_new_int(ccix_error->CcixPortId));
     
     //CCIX PER Log.
-    //todo: implement as described in Section 7.3.2 of CCIX Base Specification (Rev 1.0)
-    //the PER Log structure notes the number of DWORDs in the record.
+    //This is formatted as described in Section 7.3.2 of CCIX Base Specification (Rev 1.0).
+    unsigned char* cur_pos = (unsigned char*)(ccix_error + 1);
+    int remaining_length = section - (void*)cur_pos + ccix_error->Length;
+    if (remaining_length > 0)
+    {
+        char* encoded = b64_encode(cur_pos, remaining_length);
+        json_object_object_add(section_ir, "ccixPERLog", json_object_new_string(encoded));
+        free(encoded);
+    }
 
     return section_ir;
 }
\ No newline at end of file
diff --git a/sections/cper-section-cxl-component.c b/sections/cper-section-cxl-component.c
index ab3b34f..cb950b7 100644
--- a/sections/cper-section-cxl-component.c
+++ b/sections/cper-section-cxl-component.c
@@ -6,6 +6,7 @@
  **/
 #include <stdio.h>
 #include "json.h"
+#include "b64.h"
 #include "../edk/Cper.h"
 #include "../cper-utils.h"
 #include "cper-section-cxl-component.h"
@@ -13,11 +14,41 @@
 //Converts a single CXL component error CPER section into JSON IR.
 json_object* cper_section_cxl_component_to_ir(void* section, EFI_ERROR_SECTION_DESCRIPTOR* descriptor)
 {
-    //The length of the structure (bytes).
     EFI_CXL_COMPONENT_EVENT_HEADER* cxl_error = (EFI_CXL_COMPONENT_EVENT_HEADER*)section;
     json_object* section_ir = json_object_new_object();
+
+    //Length (bytes) for the entire structure.
+    json_object_object_add(section_ir, "length", json_object_new_uint64(cxl_error->Length));
     
-    //todo: Figure out structure for CXL Component Event log (UEFI spec is a bit vague)
+    //Validation bits.
+    json_object* validation = bitfield_to_ir(cxl_error->ValidBits, 3, CXL_COMPONENT_ERROR_VALID_BITFIELD_NAMES);
+    json_object_object_add(section_ir, "validationBits", validation);
+
+    //Device ID.
+    json_object* device_id = json_object_new_object();
+    json_object_object_add(device_id, "vendorID", json_object_new_int(cxl_error->DeviceId.VendorId));
+    json_object_object_add(device_id, "deviceID", json_object_new_int(cxl_error->DeviceId.DeviceId));
+    json_object_object_add(device_id, "functionNumber", json_object_new_int(cxl_error->DeviceId.FunctionNumber));
+    json_object_object_add(device_id, "deviceNumber", json_object_new_int(cxl_error->DeviceId.DeviceNumber));
+    json_object_object_add(device_id, "busNumber", json_object_new_int(cxl_error->DeviceId.BusNumber));
+    json_object_object_add(device_id, "segmentNumber", json_object_new_int(cxl_error->DeviceId.SegmentNumber));
+    json_object_object_add(device_id, "slotNumber", json_object_new_int(cxl_error->DeviceId.SlotNumber));
+    json_object_object_add(section_ir, "deviceID", device_id);
+
+    //Device serial.
+    json_object_object_add(section_ir, "deviceSerial", json_object_new_uint64(cxl_error->DeviceSerial));
+
+    //The specification for this is defined within the CXL Specification Section 8.2.9.1.
+    unsigned char* cur_pos = (unsigned char*)(cxl_error + 1);
+    int remaining_len = section - (void*)cur_pos + cxl_error->Length;
+    if (remaining_len > 0)
+    {
+        json_object* event_log = json_object_new_object();
+        char* encoded = b64_encode(cur_pos, remaining_len);
+        json_object_object_add(event_log, "data", json_object_new_string(encoded));
+        free(encoded);
+        json_object_object_add(section_ir, "cxlComponentEventLog", event_log);
+    }
 
     return section_ir;
 }
\ No newline at end of file
diff --git a/sections/cper-section-cxl-component.h b/sections/cper-section-cxl-component.h
index 17dcedf..fa93950 100644
--- a/sections/cper-section-cxl-component.h
+++ b/sections/cper-section-cxl-component.h
@@ -4,6 +4,9 @@
 #include "json.h"
 #include "../edk/Cper.h"
 
+#define CXL_COMPONENT_ERROR_VALID_BITFIELD_NAMES (const char*[]) {"deviceIDValid", "deviceSerialValid", \
+    "cxlComponentEventLogValid"}
+
 ///
 /// CXL Generic Component Error Section
 ///
@@ -26,10 +29,6 @@
     UINT64 DeviceSerial;
 } EFI_CXL_COMPONENT_EVENT_HEADER;
 
-typedef struct {
-    //todo: What is the structure for this? The UEFI spec is a bit vague.
-} EFI_CXL_COMPONENT_COMMON_RECORD_HEAD;
-
 json_object* cper_section_cxl_component_to_ir(void* section, EFI_ERROR_SECTION_DESCRIPTOR* descriptor);
 
 #endif
\ No newline at end of file